Thanks for sharing your knowledge. I have fitted the LEDs to all of my lights except the blinker (indicator). I'm in Australia and I'm unable to source the bridge rectifier you have used here. I have found this unit: W04 1.5A 400V Bridge Rectifier. Do you think this will do the job? It's specs are: Diode Type - Bridge rectifier Peak Reverse Voltage - 400V Diode maximum current - 1500mA Diode maximum power - 600W It is physically packaged very similar to the one you used. Any advice appreciated!
Yep should be ok the current it can take 1.5a and the voltage it can run to both exceed what you will be using with the replacement led indicator warning light. The led will only be a few watts of power so the current will be low and the voltage 13 - 14 volts the battery floating off the alternator is ok.
Did think about this for continuity but I would only use main bream at night and you can see all the original lights then & I don't really ride at night so decided to exclude it.
Thank you for the info 🙏😊
Thank you for sharing the information, will look to get the led lights, also have changed the head lights to led.
Glad I could help
Does it matter for watts or amps for the rectifier?? Thank you
Hi, yes too lower value you will damage the rectifiers
Can you tell me what i would need? Thank you
We have the same bike!
Thanks for sharing your knowledge. I have fitted the LEDs to all of my lights except the blinker (indicator). I'm in Australia and I'm unable to source the bridge rectifier you have used here. I have found this unit: W04 1.5A 400V Bridge Rectifier. Do you think this will do the job? It's specs are:
Diode Type - Bridge rectifier
Peak Reverse Voltage - 400V
Diode maximum current - 1500mA
Diode maximum power - 600W
It is physically packaged very similar to the one you used.
Any advice appreciated!
Yep should be ok the current it can take 1.5a and the voltage it can run to both exceed what you will be using with the replacement led indicator warning light. The led will only be a few watts of power so the current will be low and the voltage 13 - 14 volts the battery floating off the alternator is ok.
Meant to add sorry for the late reply new year took its toll, good biking
Nice upgrade and informative video. Why didn’t you replace the high beam bulb also?
Did think about this for continuity but I would only use main bream at night and you can see all the original lights then & I don't really ride at night so decided to exclude it.
Where do I get these led upgrades
Hi, I got mine off Ebay from memory but they are pretty common as used for car sidelights and interior lights