I am planning to include the MV7 in a comparison for sure since they both have built-in DSP, but the PodMic has USB-C and Shure still hasn't updated the MV7 from micro-USB which is a shame.
Very good review/demo - thanks for taking the time to create and share. Just a quick recommendation - When comparing two items, it's always best to hold all variables constant except for what you're comparing. During the portion when you compared XLR to XLR, from the viewers' angle of the video, it appears that you were (1) much closer to the PodMic USB, and (2) were speaking more directly into the end of the PodMic USB, but were speaking into the original at more of an angle. Proximity and angle are both variables that can impact the results delivered by microphones. Not trying to be nitpicky, just pointing out something to maybe pay closer attention to in future videos. But again, overall a well-done video.
The PodmicUSB has a slighly deeper tone. At $199 USD before I convert to Australian Dollars, I think there may be better USB alternatives. Maybe a USB comparison with others. Great Video 👏🏼
I would like to know that other microphones have the Revolution PreAmps and allow you to set Compressor, High Pass Filter, Noise Gate, Aural Exciter and Big Bottom.
What a great video for beginners like me! I've watched it two full times now, and it has helped me get acquainted with all the possibilities for this microphone. I've recently upgraded to the Rode Podmic USB from a Samson Q2U, and with the help from your video, I've already noticed a significant difference in sound quality, because of the ability to control the microphone better.
You're right! I was hoping the PodMic USB would allow this too, but tested an confirmed what Rode said - it doesn't work unfortunately. I'm guessing it's not something that a firmware update could address either, probably when the circuitry for USB senses the voltage it disables the XLR output or something like that (would be great if I'm wrong though). Not sure why they omitted that feature. My two biggest gripes with the MV7 are the ineffective windscreen and the fact that they still haven't updated it to USB-C. The PodMic USB addresses both of those issues at a lower price....but then doesn't do both outputs simultaneously. They were so close!
@@semiprotech I really wish the MV7 could be updated with a USB-C interface, but the current Micro USB interface doesn't affect my daily use either, and I paid $160 AUD (USD $110)last year when Amazon had a special offer in Australia, plus a local sale, and now I use the MV7 at home and the ATR2100x on the go, these two microphones together cost less than the current price of a PodMic USB now. It's just that MV7 don't come on special offer very often, so still have to wait until the right time. BTW, i bought third party windscreen for MV7 for only few bucks and it helps a-lot.
Agree! It's disappointing that Shure hasn't updated the USB port on the MV7 at this point. The connection is a bit wobbly on my MV7 and I've never been rough with it.
I think the USB version sounds a lot warmer and nicer to the ear. I've seen videos comparing the USB version of this microphone to the SM 7B and they both sound incredible.
Hi, please compare the podmic USB with NT1 5th generation and list out the pros and cons and potentially which is you should go for. This would really help. Thank you.
I am having issues with the connect software. Every time I try to load the effects in the software it knocks the mic off. When it does come back on it keeps going in and out🤦🏽♂️
Thanks for the information. Very helpful preview. I also bought a PODMIC USB but I'm having problems on my iPhone and I can't connect USB to my RODEcaster Pro II as you described. I purchased the SC-19 cable from RODE and it now does connect to the iPhone but it still is not working as advertised. I'll keep working on it.
What apps have you tried using it with on your iPhone? I was able to control the DSP using the Rode Central app and record using the Rode Reporter app (that one doesn't control the DSP yet but it recorded ok), Rode Capture, and the regular iPhone camera app.
Great question - it does seem to work fine with any regular USB-C cable to computers/tablets I tried a few different ones and had no issues. BUT it does not seem to work with regular lightning to USB cables. It works with Rode's lightning to USB cables (SC19) and it also works fine with the apple USB-A to lightning adapter and the USB-A + power adapter. I've been using it with the USB-A to lightning (camera adapter) and a regular USB-C to USB-A cable with my iPhone 14 with no issues.
It almost seems like there is a touch more “low mid” to smooth out the audio, but it is minuscule. I would have loved to have a tiny low end boost, but this mic is is built like a pickup truck, dependable, gets the job done, and built to last forever! Easily able to get your preferred sound with any EQ’ing skills. 👍🏻
Hi! Only the comparison to the original Podmic was over XLR - the other parts of the video are all recorded over USB (the intro up to the comparison and then everything after the comparison).
I'm going to be working on a comparison video with a few mics and I will be sure to include the MV7! In the meantime, I made a quick comparison of the raw and processed sound of each: ruclips.net/user/shortsWBeCu_3u-7I?feature=share
Hi! Yes, after you set up the DSP in Rode Central, the settings are retained in the microphone so you don't need to have a Rode app open in order to keep the DSP turned on. You can actually set up the processing how you like and then disconnect the microphone and plug it into a different device and the settings will be retained.
My full review video on the PodMic USB: ruclips.net/video/og1Rxlfxgfo/видео.html
They sound basically the same. The pop filter helps for sure. I’m buying because I want the usb capability and my m7 broke.
I am planning to include the MV7 in a comparison for sure since they both have built-in DSP, but the PodMic has USB-C and Shure still hasn't updated the MV7 from micro-USB which is a shame.
Very good review/demo - thanks for taking the time to create and share.
Just a quick recommendation - When comparing two items, it's always best to hold all variables constant except for what you're comparing. During the portion when you compared XLR to XLR, from the viewers' angle of the video, it appears that you were (1) much closer to the PodMic USB, and (2) were speaking more directly into the end of the PodMic USB, but were speaking into the original at more of an angle. Proximity and angle are both variables that can impact the results delivered by microphones. Not trying to be nitpicky, just pointing out something to maybe pay closer attention to in future videos. But again, overall a well-done video.
Thank you! And I appreciate the feedback, I will be more intentional with the positioning when I do more comparisons!
Curious, would you say that this would be a better buy than the Sennheiser Profile USB Mic & Rode XDM 100? (For mainly USB use)
Sounds pretty good. A comparison with a Shure SM 7b would be nice
Thanks! I will be sure to include the SM7B in a comparison.
The PodmicUSB has a slighly deeper tone. At $199 USD before I convert to Australian Dollars, I think there may be better USB alternatives. Maybe a USB comparison with others.
Great Video 👏🏼
Thank you! I agree some comparisons are in order!
Shure m7 is better quality sound but the usb hookup is trash
@@calihawk82 It’s marginally worse to my ears. Most people just assume Shure is better but the MV7 has no low end at all.
I would like to know that other microphones have the Revolution PreAmps and allow you to set Compressor, High Pass Filter, Noise Gate, Aural Exciter and Big Bottom.
What a great video for beginners like me! I've watched it two full times now, and it has helped me get acquainted with all the possibilities for this microphone. I've recently upgraded to the Rode Podmic USB from a Samson Q2U, and with the help from your video, I've already noticed a significant difference in sound quality, because of the ability to control the microphone better.
Thank you! I'm glad it was helpful and glad you're enjoying your new mic!
Is it me or new one has some harsh high frequencies?
USB on XLR has a little sizzle which the original lacks
That's a good way to describe it! It was hard to tell while monitoring but that small difference is there.
Podmice usb sounds beter on a iPhone with iPhone Ears
Thanks for the video ! One thing is , the MV7 can record on both USB and XLR at same time , it helps a lot , to help you to have backup track.
You're right! I was hoping the PodMic USB would allow this too, but tested an confirmed what Rode said - it doesn't work unfortunately. I'm guessing it's not something that a firmware update could address either, probably when the circuitry for USB senses the voltage it disables the XLR output or something like that (would be great if I'm wrong though). Not sure why they omitted that feature. My two biggest gripes with the MV7 are the ineffective windscreen and the fact that they still haven't updated it to USB-C. The PodMic USB addresses both of those issues at a lower price....but then doesn't do both outputs simultaneously. They were so close!
@@semiprotech I really wish the MV7 could be updated with a USB-C interface, but the current Micro USB interface doesn't affect my daily use either, and I paid $160 AUD (USD $110)last year when Amazon had a special offer in Australia, plus a local sale, and now I use the MV7 at home and the ATR2100x on the go, these two microphones together cost less than the current price of a PodMic USB now. It's just that MV7 don't come on special offer very often, so still have to wait until the right time. BTW, i bought third party windscreen for MV7 for only few bucks and it helps a-lot.
Thank you for the detailed comparison. Can you please do Rode PoMic USB VS Shure SM7B both USB-XLR and XLR-XLR?
Thanks! I'll be sure to include the SM7B in my in-depth review!
All new USB mics like this need to have Type C. Shure is still pushing very old micro usb. Unbelievable.
Agree! It's disappointing that Shure hasn't updated the USB port on the MV7 at this point. The connection is a bit wobbly on my MV7 and I've never been rough with it.
does popfilter from usb works on pod mic?
I believe that he said that it did, and even attached the pop filter to the original Podmic.
@@JamesRichardson3rd it will be nice hope we can get it as accesory to buy one
I can hear a difference. The USB sounds richer
now a battle with the shure sm7b
I think the USB version sounds a lot warmer and nicer to the ear. I've seen videos comparing the USB version of this microphone to the SM 7B and they both sound incredible.
usb might sound a bit warmer
need that pop filter
Hi, please compare the podmic USB with NT1 5th generation and list out the pros and cons and potentially which is you should go for. This would really help. Thank you.
I am having issues with the connect software. Every time I try to load the effects in the software it knocks the mic off. When it does come back on it keeps going in and out🤦🏽♂️
Can you also configure the podmic to rode connect via XLR?
At2040 droped a USB version. 150 eur.
I guess even this having the windscreen included, the price, for me, does not add up.
But its a good mic.
Great video!
Just buy the pop filter and you are good.
Thanks! I hope Rode sells the pop filter separately!
@@semiprotechAgreed
Thank you 😊
How does this compare to the Rode X with the Unify software?
pod mic usb XLR sounds better than non usb version !
thanks for the video,
how much $ did you get it for?
Thanks for the information. Very helpful preview. I also bought a PODMIC USB but I'm having problems on my iPhone and I can't connect USB to my RODEcaster Pro II as you described. I purchased the SC-19 cable from RODE and it now does connect to the iPhone but it still is not working as advertised. I'll keep working on it.
What apps have you tried using it with on your iPhone? I was able to control the DSP using the Rode Central app and record using the Rode Reporter app (that one doesn't control the DSP yet but it recorded ok), Rode Capture, and the regular iPhone camera app.
Thanks for your Video. The question is MV7 or this one? 🤔 a compare video will be interesting
I will make sure the MV7 is on the list for a comparison video! I'm working on a few shorts as well for some quick comparisons.
Does it work with regular usb-c cables? Also: does it work with the original Apple to lightning cable?
Thanks for the good review!
Great question - it does seem to work fine with any regular USB-C cable to computers/tablets I tried a few different ones and had no issues. BUT it does not seem to work with regular lightning to USB cables. It works with Rode's lightning to USB cables (SC19) and it also works fine with the apple USB-A to lightning adapter and the USB-A + power adapter. I've been using it with the USB-A to lightning (camera adapter) and a regular USB-C to USB-A cable with my iPhone 14 with no issues.
Love rode stuff.
It almost seems like there is a touch more “low mid” to smooth out the audio, but it is minuscule. I would have loved to have a tiny low end boost, but this mic is is built like a pickup truck, dependable, gets the job done, and built to last forever! Easily able to get your preferred sound with any EQ’ing skills. 👍🏻
Definitely hard to beat Podmic build quality! It's more likely to damage the thing you drop it on than itself.
@@semiprotech 😂🤣
I really want to hear this on usb mode not xlr I know thi would sound amazing
Hi! Only the comparison to the original Podmic was over XLR - the other parts of the video are all recorded over USB (the intro up to the comparison and then everything after the comparison).
Can you compare with Shure MV7?
I'm going to be working on a comparison video with a few mics and I will be sure to include the MV7! In the meantime, I made a quick comparison of the raw and processed sound of each: ruclips.net/user/shortsWBeCu_3u-7I?feature=share
Down the "RØDE" lol.
Another great video!
Do the noise gate and compressor in Rode Central app work if you close the app completely? Or do you have to keep the app open?
Thanks for the review
Hi! Yes, after you set up the DSP in Rode Central, the settings are retained in the microphone so you don't need to have a Rode app open in order to keep the DSP turned on. You can actually set up the processing how you like and then disconnect the microphone and plug it into a different device and the settings will be retained.
@@semiprotech That awesome, thanks for all the info!
Its called Røde...
😏
GREAT VIDEO! Instant sub!
Thank you!
Great video!
Thank you!