The Redcat Ascent 18 gets an Injora MBL32 Brushless ESC & Purple Viper Motor Combo! TRX4m brushless!

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 74

  • @allisuebaheza2838
    @allisuebaheza2838 5 месяцев назад +1

    I just wanted to say thanks for the stickers I love them

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      No problem 👍. Glad you love em!!!!

  • @scottpledge4073
    @scottpledge4073 4 месяца назад +1

    Ill be doing this tomorrow when my receiver gets here. Your video has given me some needed confidence lol. Thanks

    • @TheShopMiniRC
      @TheShopMiniRC  4 месяца назад

      Nice!!! I hope it helps you along the way.

    • @scottpledge4073
      @scottpledge4073 4 месяца назад +1

      @@TheShopMiniRC it did. It's up and running. Thanks

  • @joshuareece9951
    @joshuareece9951 9 дней назад +2

    How do you use stock transmitter? I thought you had to get a new transmitter with this kit?

    • @TheShopMiniRC
      @TheShopMiniRC  9 дней назад

      I have a receiver that binds to the stock receiver. Some of the furitek combos come with an rx that binds to stock.

  • @ciborg86
    @ciborg86 5 месяцев назад +2

    Great video as usual. Thanks!

  • @samwebb9740
    @samwebb9740 5 месяцев назад +1

    Great video, I have an ascent 18 on order. Looks like I'm ordering a new receiver and this kit too.

  • @AnySumptionBanter
    @AnySumptionBanter 5 месяцев назад +2

    as always, thanks for the deep dive.
    I saw a preview of the furitek esc/motor all in one and wondering where that price point will be compared to this.
    i'm hoping injora doesn't keep raising its prices.. keep where they are, undercutting market and sell more so their profits stay high while we pay less.. best economy for both.
    its good that they are using open source which there are so many esc's doing it too which helps the hobby so much keep costs down. these are the type of innovations I was hoping to see coming because things seemed very stagnant for the past 6 months or so.

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад +1

      There is a ton more innovation on the way.

  • @rubiken06
    @rubiken06 5 месяцев назад +1

    Looking to go with SCX24 platform. Thanks for the video.

  • @dc9808
    @dc9808 2 месяца назад +1

    Scx24 this Friday, can't wait.

  • @makiahcarey4919
    @makiahcarey4919 2 месяца назад +1

    I’m going to buy this when its available again

    • @TheShopMiniRC
      @TheShopMiniRC  2 месяца назад +1

      It should be available again soon!

  • @DrKVo13
    @DrKVo13 4 месяца назад +1

    Hello
    Great video. Very useful.
    Do you know if these esc makes ultrasonic noise ? And if it does. So you if it can cause ear damage ?

    • @TheShopMiniRC
      @TheShopMiniRC  4 месяца назад

      They are a lot quieter than some of the other brands out there. But I Donno if they have a tone most can’t hear but some can… never heard anyone mention anything like that.

  • @R-EVLMNKY
    @R-EVLMNKY 5 месяцев назад +3

    Very good price for a really nice combo, no need for those overpriced FURITEK stuffs 👌 my max smasher furitek brushless combo is my worst rc stuff purchase ever, my s2pid impulse buy 🤦‍♂️ hope Injora makes more FMS upgrades available soon 😊

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад +1

      Sorry you’re unhappy with your furitek. We love ours.

    • @R-EVLMNKY
      @R-EVLMNKY 5 месяцев назад +1

      @@TheShopMiniRC of course, definitely no doubt. Same here, I would definitely would too even if it’s much more expensive. I will love them more than you do! 😁
      Furitek is over priced in my opinion having no real competitor.

  • @joshread3740
    @joshread3740 5 месяцев назад +1

    What do you think is the more substantial first upgrade on this crawler: this brushless esc/motor or a good set of brass beadlock wheels/tires?

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад +1

      i mean.. some good wheels and tires go a LONG way. The ascent already has really good modulation and slow crawl... plus it doesnt hurt that the stock motor is no slouch.

  • @MysticRiverRC
    @MysticRiverRC 5 месяцев назад +2

    Good bang for the buck!

  • @jasoncaisley5071
    @jasoncaisley5071 5 месяцев назад +1

    u we're right about checking online for the camel trucks amazon aus r going to have the range rover only in 6 weeks, hey one,s better than none cheers ken

  • @sebastianRC-Mania
    @sebastianRC-Mania 5 месяцев назад +1

    beautiful car ❤

  • @giopirmisashvili5514
    @giopirmisashvili5514 5 месяцев назад +1

    Thank you

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      You're welcome. Thank you for watching.

  • @jasoncaisley5071
    @jasoncaisley5071 5 месяцев назад +1

    cool kenny i like it cant beat the price i might try one in a smasher / high roller i make my own motor mount,s from alloy plate for the fms and hobby plus used furitec as a template .also. i put trxm LR shell onto a evo pro needed heavier springs and thicker weight oil but its pretty cool super slow super fast gotta love furitec see how the venom holds up allgood so far

  • @bradkuykendall9174
    @bradkuykendall9174 5 месяцев назад

    Thanks for the great video. I’m assuming I’ll need to order an adapter from this plug to the jst to continue using the stock battery?

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад +1

      Yep, or make your own from the provided cables.

  • @PandaPenk
    @PandaPenk 5 месяцев назад +1

    Thanks for the Video. Have a trx4m setup setup with meus 2speed box, meus isokinetic axles and meus lcg chassis. Hence there is not enough space for a 180 motor anymore (In fact the lay down servo strikes against the motor, if the shocks suffer some compression ...). So the purple viper might be a good option but perhaps also this motor is not short enough. Therefore 3 question to you, because you seem to have wide knowledge on these things:
    1) Can I mount the purple mofo pancake to the trx4m meus 2speed box?
    2) If yes, do you know a pinion for the pancake fitting this setup?
    3) If yes again, do you see any advantage in running the pancake with the Mofo rockwolf or a Lizard ESC instead of running the pancake with the MBL32?
    Thanks in advance

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      So, I have a pancake and a Meus 2 speed sitting here and I’m lookin. ;).
      The bolt spacing on the mofo pancake is 12.5mm. So is the TRX4M. So that will work, however the shaft on the pancake is 3mm vs the stock/meus motor shaft is 2mm
      You would have to find a mod4 10-11-12 pinion for the 3mm shaft. 11 is stock and will mesh fine but my guess is those sizes would work and you could, worst case, elongate the motor mount holes on the trans to get a good mesh. It seems like once mounted the shaft lengths will be the same, so you’re good there.
      As for which esc to use, the furitek bluetooth app is super nice but I think any of the esc will work great.

    • @PandaPenk
      @PandaPenk 5 месяцев назад +1

      @@TheShopMiniRC Thanks a lot for your help. I think I purchase the viper. And if it is to long I go with the pancake. Because the rockwolf alone costs nearly the same as the MBL32 together with the viper ... (Mofo sells a 12T mod0.4 3mm pinion, a 11T seems unbuyable ... )

  • @Rocklandingoffroad
    @Rocklandingoffroad Месяц назад +1

    35:15 is exactly the cogg i get from my furitek.

    • @TheShopMiniRC
      @TheShopMiniRC  Месяц назад

      Maybe your tire diameter is too big? Try putting underdrive in your diffs or portal both front and back... or try a smaller pinion gear on the motor.

    • @Rocklandingoffroad
      @Rocklandingoffroad Месяц назад

      @@TheShopMiniRCthey dont make under drive for the diffs only the portals boxes and i have those already. Im on 63 black label same as stock. It’s ok thanks for the help. All these systems suck for modded ascents. Waste of money.

  • @dragonbeast2757
    @dragonbeast2757 2 месяца назад +1

    What kind of receiver did you use?

    • @TheShopMiniRC
      @TheShopMiniRC  2 месяца назад

      I think this one was the furitek rx for the stock remote.

  • @TrokaRC
    @TrokaRC 5 месяцев назад +1

    Sick stuff from injora, like the mb100s so maybe its time to go brushless on the ascent18.

  • @JamesDirtRC
    @JamesDirtRC 4 месяца назад +1

    I get a accent 18 is the trans plastic gears going to fail ? Something i should get first ?

    • @TheShopMiniRC
      @TheShopMiniRC  4 месяца назад +1

      I haven’t had any issues with the trans gears yet. (In either of my trucks)

    • @JamesDirtRC
      @JamesDirtRC 4 месяца назад +1

      @@TheShopMiniRC That is Good to hear. THANK YOU.

  • @meegssan5716
    @meegssan5716 5 месяцев назад +1

    Can you use a furitek esc with thr motor?

  • @justinjenkins8170
    @justinjenkins8170 5 месяцев назад +1

    What did you use to keep using the stock controller?

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      I mentioned it in the video. It’s a receiver that furitek sells with their ESCs.

  • @FYRC15
    @FYRC15 5 месяцев назад

    What receiver was that you used with the system? Furitek?

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      yeah, as I mentioned, its one of the rx that come with the furitek system.

  • @evoalvy
    @evoalvy 3 месяца назад +1

    Is there any way to buy a replacement programmer ? Please help!!

    • @TheShopMiniRC
      @TheShopMiniRC  3 месяца назад

      I’d reach out to Injora directly. They can send you another one.

  • @JamesDirtRC
    @JamesDirtRC 4 месяца назад +1

    So can you add esc to the stock radio receiver ?

    • @TheShopMiniRC
      @TheShopMiniRC  4 месяца назад +1

      Unfortunately you have to upgrade the rx and tx to go brushless.

    • @JamesDirtRC
      @JamesDirtRC 4 месяца назад +1

      @@TheShopMiniRC Thank you :)

  • @oldmanjeepingandbiking9621
    @oldmanjeepingandbiking9621 5 месяцев назад +1

    I installed this combo in my ascent18 and feel it is a much smoother esc/motor combo than the Furitek, however, there is very little drag brake even after going into the programmer and setting it to max. overall for the price this is a KILLER deal. So much better than the Furitek

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      Thanks for the insight. We agree that the price is fantastic.

    • @zachpaw
      @zachpaw 2 месяца назад

      @@oldmanjeepingandbiking9621 if you were to do it again would you get the furitek combo with receiver for $99 or the injora combo and buy a different receiver, so $60 + $20ish equalling $80 give or take? Which would you do now?

    • @oldmanjeepingandbiking9621
      @oldmanjeepingandbiking9621 2 месяца назад

      @@zachpaw 100% injora combo at this point

    • @zachpaw
      @zachpaw 2 месяца назад

      @@oldmanjeepingandbiking9621 alright, thanks

  • @joshuasalisbury789
    @joshuasalisbury789 5 месяцев назад

    Is the furitek venom motor and lizard pro better or worse?

    • @TheShopMiniRC
      @TheShopMiniRC  5 месяцев назад

      Hard to say, the lizard pro with the Bluetooth app for tuning is WAY WAY better than the PC tool for the Injora. But the price on this injora kit is damn good.

    • @jasoncaisley5071
      @jasoncaisley5071 5 месяцев назад

      also they've only been out for a week see how they hang in for the long haul and did u watch Kenny showing u how to tune it what a head uck .stick with furitek true tried and tested not saying dont try new stuff maybe wait a bit longer plus thier sold out already anyways

  • @acmr3215
    @acmr3215 2 месяца назад +1

    You really should have gotten a metal upgraded transmission too......the plastic output shafts and driveshafts won't last long on brushless

  • @DrKVo13
    @DrKVo13 4 месяца назад +1

    Hello
    Great video. Very useful.
    Do you know if these esc makes ultrasonic noise ? And if it does. So you if it can cause ear damage ?

    • @TheShopMiniRC
      @TheShopMiniRC  4 месяца назад

      No, these esc are much more quiet than some other brands.