@capecrawlers have you found a solution to running the injora 43:1 reduction gears in their billet case. Mine bind when case is closed lightly, seems others have the same issue.. I may make clearance tomorrow at work, but wondering if you've ran across this. Trx-4m platform. Tia
@CapeCrawlers you saved me with the usb c cable, I could not get a com line and was getting pretty frustrated but thanks to you I got it figured out! Your videos are the best!
One thing to note you breezed by the motor kv must match in the programming. That means you CAN run any senseless motor with it. Just tell the esc the motor size.
SOOO glad to see something able to give Furitek a true competitor at a decent price!! The Spektrum Firma just didn’t seem like it was “it” haha I don’t think I’d want to buy anything like this without seeing you test it first. Thanks and great video!
Really smooth and powerful system! I dont have a extra transmitter and reciever lying around, so what would be a decent, budget friendly transmitter/reciever combo?
I have two Defenders. One is built for crawling the other one is just stock with all metal drive train and fast gears. I could make it faster with overdrive gearing in the axels in the future. But it is so much fun to see it drift around and do donuts and what not. I feel like I needed the fast one to be faster and this feels like it. I want to tune the fast one like a Baja truck so it can handle rough terrain at high speeds. The crawler is already so capable I'm just enjoying watching it do its thing out on the rocks.
So I have a question about this setup. You would need a separate receiver and transmitter to get it to work with ascent 18 correct? Second question you think the injora 6 channel would work with a tactic tx300 and that could work with this system?
I am still hoping that there will be a brushless TRX4M conversion kit, with an ESC/receiver combo, that will bind with the stock and aftermarket transmitters. And that will control the tail lights/brake lights/backup lights like the stock ESC does. I do not want to have to add a separate light controller. I like minimal wiring and to keep it tidy. Also, make it the same size and configuration as the stock ESC/receiver. I would buy three today if this existed. Injora, are you listening?
I am stuck you didn’t show what to download or unzipping the file at first I couldn’t find it on the injora website then I didn’t plug the trunk first now I don’t know what or how to unzip. Easy to install love it so far. Love your vids especially with your son. I am 68 and am computer challenged thank you for your help
I installed this motor with crawler gears and a Furitek Lizard Pro ESC. It’s nowhere near as fast as in your video. Any ideas why? Is the Furitek ESC keeping it from being as fast as with the Injora ESC?
Sick build I'm getting a binding or like cogging when I am going from slow to load and adding speed. The injora team said I can adjust settings what are your ESC settings? I have the fat viper and 29/1 gears or whatever comes with their brushless combo
@@CapeCrawlersthank you, much appreciated, and the price is great! I'll use this one for my standard crawlers, and the Cedar for super dusty or muddy environs.
Hello, did you manage to sort it out? Mine is about to arrive and I am wondering how it compares to stock speed. I will gain torque for sure but I wonder in which proportion this will affect cruising speed (and yes, I do cruise through the living room, haha)
Ya know, I do, eventually, want to get this for my TRX4M Bronco, but my question is: what kind of battery will I need?? Other than that, am quite interested in this kit. 🤔
Looks great. Basically it’s a mini Hobbywing Fusion. I’m surprised Hobbywing hasn’t made something for the mini rc, their 1/10 scale fusion stuff is amazing . RC fun and games reviewed this set up and said you will get a Traxxas battery adapter when purchasing but we need to buy a receiver ?
It’s more like a standard brushless esc and motor. Hobbywing fusion is a 2-1 system containing the motor and esc in the can. I doubt Hobbywing will make anything for the micros unfortunately. Holmes hobby’s recent videos on micro crawlers made me realize that a lot of companies don’t really see micros as a good return on investment. Castle released mediocre sytem and the spektrum system is just a repurposed esc/motor meant for like a touring car or something. Which is why it was pretty awful. I’m getting long winded here lol. But the new furitek 2-1 would be closer to the Hobbywing fusion’s. But knowing Furitek it’ll likely cost even more than the fusion pro…
@@JUSTHAVEFUNRC yes I understand the differences . All I meant is it has wheel speed when you need it and great control on the low end, therefore it acts like a Fusion motor. If they thought it was worth their time they would have already come out with something. I’m surprised Injora is still cranking out upgrades for this platform, but it means people are buying them, I have 6 trx4m, and lots of Injora upgrades on them but I’ve got them to a point where I’m happy with the capabilities. Happy R/Cing !!
Almost glad this isn’t available for the SCX24 as I am currently waiting on delivery for my lizard pro esc, and motor mount for the micro Komodo to go in my Dead bolt
Hi all, great video!! I just bought the TRX4M Defender and I want to get some hope up's. Is Injora a good company and where are they located? Asking that question because of ordering and waiting for product shipping.
How does it compare to the Furitek Micro Komodo + Lizard Pro? I’ve decked out my TRX4M with everything except electronics, and want the best slow crawl on the market. I’m leaning towards Furitek because of the Bluetooth esc settings, and the fact that the Injora system is $60, making me a bit skeptical as to its performance compared to the Furitek.
So many people are going to destroy their batteries with this system. LVC is off by default, Injora either needs to set it to on during production or include instructions how to do so. On a side note drag brake can be adjusted the setting is called Stopped Brake Level its a slider from 1-10.
Annnnnd it's already sold out. I should have bought it sooner but I wanted to see what you thought of it first. Guess I will have to wait until the next batch. Price point is insane and is definitely going to make other manufacturers out there think.
I would honestly keep waiting just a tad longer, I heard their working on waterproofing the esc with an updated version pretty soon which is what I’m holding out for
Gotta say im a bit disappointed. Performance looms fine and the proce is okay. But the entry kevel furitek combos arent much more and have Bluetooth programming and smaller escs
youre right and smaller esc, replaceable wire harness, integrated on/off switch, no silly seperate adapter plate, plus they come with a receiver so you dont have to replace the factory radio.
It looks like it hasn’t enough torque for slow crawling, because almost every obstacle it passed with the punch. For the indoor course it is the worst result I’ve seen on this channel, considering that this wasn’t box stock rig
Timestamps
Unboxing & key features: 0:28
Programming: 3:02
In the build: 6:21
Speed tests: 8:57
Indoor course runs: 9:58
Rock crawling: 15:19
Final thoughts: 19:22
Question is: can you do a video on this system on, how it would work with the Spektrum ESC connected to it??
@capecrawlers have you found a solution to running the injora 43:1 reduction gears in their billet case. Mine bind when case is closed lightly, seems others have the same issue..
I may make clearance tomorrow at work, but wondering if you've ran across this. Trx-4m platform.
Tia
@CapeCrawlers you saved me with the usb c cable, I could not get a com line and was getting pretty frustrated but thanks to you I got it figured out! Your videos are the best!
Any plans to dress up the indoor course? It would be cool to see an update.
Love the support for Matt at 2fm! Another awesome video, Adam! Def going to be getting one of these for one of my minis
So glad AM32 ESC's are getting more and more popular.
One thing to note you breezed by the motor kv must match in the programming. That means you CAN run any senseless motor with it. Just tell the esc the motor size.
Thanks for your multiple test, it’s an inspiration for my trx4m and you have a good comments.
Continue to give fun ☺️
Fail out of the box, a real confidence builder 😂
This right here. Not sure whats the purpose of this review since the whole video was shot with their pre=release version of their ESC 🤷🏻♂
Injora is Chinese stuff so yeah.
I love how you do time stamps
🤨
These are sure to sell out in no time!
SOOO glad to see something able to give Furitek a true competitor at a decent price!! The Spektrum Firma just didn’t seem like it was “it” haha I don’t think I’d want to buy anything like this without seeing you test it first. Thanks and great video!
That aint slow. The current slow crawl record is 4:25 over 10cm. Can any1 beat that? Love to see it👍🤠👍
Really smooth and powerful system! I dont have a extra transmitter and reciever lying around, so what would be a decent, budget friendly transmitter/reciever combo?
Flysky gt3b or gt3c is a really good bang for the buck. If your budget is higher them look into radio link or the mid flysky line up .
I have two Defenders. One is built for crawling the other one is just stock with all metal drive train and fast gears. I could make it faster with overdrive gearing in the axels in the future. But it is so much fun to see it drift around and do donuts and what not. I feel like I needed the fast one to be faster and this feels like it. I want to tune the fast one like a Baja truck so it can handle rough terrain at high speeds. The crawler is already so capable I'm just enjoying watching it do its thing out on the rocks.
I’m surprised the faster one will do that since it’s a pretty unstable vehicle.
How does its waterproofness compare to the default TRX4M motor?
Great performance. Also, which material is the trail made of?
Will the have something for the Scx24 in future?
What’s your best battery recommendation for an axial scx24 v3 ?
So I have a question about this setup. You would need a separate receiver and transmitter to get it to work with ascent 18 correct? Second question you think the injora 6 channel would work with a tactic tx300 and that could work with this system?
Does it work with the fms k5 with there 2 speed
I am still hoping that there will be a brushless TRX4M conversion kit, with an ESC/receiver combo, that will bind with the stock and aftermarket transmitters. And that will control the tail lights/brake lights/backup lights like the stock ESC does. I do not want to have to add a separate light controller. I like minimal wiring and to keep it tidy. Also, make it the same size and configuration as the stock ESC/receiver. I would buy three today if this existed. Injora, are you listening?
I am stuck you didn’t show what to download or unzipping the file at first I couldn’t find it on the injora website then I didn’t plug the trunk first now I don’t know what or how to unzip. Easy to install love it so far. Love your vids especially with your son. I am 68 and am computer challenged thank you for your help
I got it works good love this setup but the esc doesn't program like I thought it would it just changes the settings.
Is an fms one coming out?
I installed this motor with crawler gears and a Furitek Lizard Pro ESC. It’s nowhere near as fast as in your video. Any ideas why? Is the Furitek ESC keeping it from being as fast as with the Injora ESC?
Hello
Great video. Very useful.
Do you know if these esc makes ultrasonic noise ? And if it does. So you if it can cause ear damage ?
Sick build I'm getting a binding or like cogging when I am going from slow to load and adding speed. The injora team said I can adjust settings what are your ESC settings? I have the fat viper and 29/1 gears or whatever comes with their brushless combo
I havent done much other than set the low voltage cutoff. Otherwise I left it factory tuned
Looks l like I gotta wait for the Scx24 version! 😅
😢 me too
same here
Yip
What r you guys on about? We already have the mounts and stuff to bolt it up. I'm running it in my c10 no trouble
@@troypostie1252 no way
I'm wondering how this compares to the Cedar Torpedo system.
Feels very similar in how it delivers power but it has significantly more wheel speed
@@CapeCrawlersthank you, much appreciated, and the price is great!
I'll use this one for my standard crawlers, and the Cedar for super dusty or muddy environs.
So it’s not a plug and play you have to program it before use?
I want to get more speed but do you think this setup with the high speed gears would be too fast and I would lose the slow crawl?
Do you think this would fit the Meus 2 speed motor for that ultra crazy low power and performance?
It’s possible to install a ESC that control the traxxas ligths like the reverse and break, and be able to install this motor?
No, not that I am aware of. The new traxxas brushless kit allows the use of the proscale light kit but you are stuck with their motor
Will this work with the radio and receiver from injora (that set says it’s for brushed)
Hi I need help I did like your tutorial but it's not going well can you help me I have the fat viper 2000kv engine
Hello, did you manage to sort it out? Mine is about to arrive and I am wondering how it compares to stock speed. I will gain torque for sure but I wonder in which proportion this will affect cruising speed (and yes, I do cruise through the living room, haha)
Ya know, I do, eventually, want to get this for my TRX4M Bronco, but my question is: what kind of battery will I need?? Other than that, am quite interested in this kit. 🤔
You can use any battery. Comes with few battery adaptors.
You can use the battery what the Trx4m came with
I didn't see an adapter for the original battery
@@UNDEADGERBIL look at it on their website
Wait till you see what furitek got coming soon... their going to the next level..😄👍
Looks great. Basically it’s a mini Hobbywing Fusion. I’m surprised Hobbywing hasn’t made something for the mini rc, their 1/10 scale fusion stuff is amazing . RC fun and games reviewed this set up and said you will get a Traxxas battery adapter when purchasing but we need to buy a receiver ?
It’s more like a standard brushless esc and motor. Hobbywing fusion is a 2-1 system containing the motor and esc in the can.
I doubt Hobbywing will make anything for the micros unfortunately. Holmes hobby’s recent videos on micro crawlers made me realize that a lot of companies don’t really see micros as a good return on investment. Castle released mediocre sytem and the spektrum system is just a repurposed esc/motor meant for like a touring car or something. Which is why it was pretty awful.
I’m getting long winded here lol. But the new furitek 2-1 would be closer to the Hobbywing fusion’s. But knowing Furitek it’ll likely cost even more than the fusion pro…
@@JUSTHAVEFUNRC yes I understand the differences . All I meant is it has wheel speed when you need it and great control on the low end, therefore it acts like a Fusion motor. If they thought it was worth their time they would have already come out with something. I’m surprised Injora is still cranking out upgrades for this platform, but it means people are buying them, I have 6 trx4m, and lots of Injora upgrades on them but I’ve got them to a point where I’m happy with the capabilities. Happy R/Cing !!
@18:58 what is that? for a moment I thought it was some ghostly figure
Will the stock transmission with crawlers gear hold up to this system? I am running the traxxas steel diff gears already.
Impressive but I am more impressed by that things turning radius. Good vid Adam
Can you review the injora mb100 wanted to see how that preformed for it being a bruised esc
Would it work in the capra 1/18 scale
Looks great!! I hope they do this setup for 1/10 scale crawlers
Already sold out
So, the ultimate question. Is it better than the Furitek Komodo combo?
Would this work for the Scx24 transmission?
Almost glad this isn’t available for the SCX24 as I am currently waiting on delivery for my lizard pro esc, and motor mount for the micro Komodo to go in my Dead bolt
will this work on the SCX24 platform??
Sweet!! I just orderd mine.
Bummed me out when it failed. Will wait a bit to see when it gets ironed out😢
I hope they make a brushless kit for the scx24, surprised this came first. Either wait or get the furitek starter kit
What specific radio transmitter and receiver are used when upgrading your crawlers like this?
In this video, it's a Radiolink RC8X transmitter and a Radiolink R4FGM receiver.
I was just wondering what shocks are on there
Hi all, great video!! I just bought the TRX4M Defender and I want to get some hope up's. Is Injora a good company and where are they located? Asking that question because of ordering and waiting for product shipping.
They are good, cost effective upgrades. Based on China but you can get a lot on Amazon with expedited shipping
Who's recording the trail outdoors great video!
How does it compare to the Furitek Micro Komodo + Lizard Pro? I’ve decked out my TRX4M with everything except electronics, and want the best slow crawl on the market. I’m leaning towards Furitek because of the Bluetooth esc settings, and the fact that the Injora system is $60, making me a bit skeptical as to its performance compared to the Furitek.
Go buy the Furitek. I've got multiple Furitek Products, yes they're pricey but it absolutely superb stuff you're dealing with
Thank you very informative video
I’d love to see that setup with a 3s in the TRX4MT
Will that injora brushless setup work with the tarantula chassis? Also What else do I need?
Yes it will. You’ll need an aftermarket radio and receiver. The Injora radios will work fine. LGRP makes a good inexpensive one too.
Have a new build currently and will not be going with this seems way to involved for an rc car injora just trying to shortcut and save money
Did you build or buy your indoor course? I just got into mini crawling and was wandering
I built it. I’ve got a video on how I did it on the channel
Water proof?
Wish these were available when I started building 24’s!! I would have saved a heap of money
Right?! You can save money on the next generation of builds 😁
So many people are going to destroy their batteries with this system. LVC is off by default, Injora either needs to set it to on during production or include instructions how to do so. On a side note drag brake can be adjusted the setting is called Stopped Brake Level its a slider from 1-10.
Annnnnd it's already sold out. I should have bought it sooner but I wanted to see what you thought of it first. Guess I will have to wait until the next batch.
Price point is insane and is definitely going to make other manufacturers out there think.
I would honestly keep waiting just a tad longer, I heard their working on waterproofing the esc with an updated version pretty soon which is what I’m holding out for
LMAO the on/off switch is almost as big as th esc it's self 🤣🤣
Do you need a PC for it to be tuned?
Yes, as far as I know it won’t work with a Mac
@@CapeCrawlers Ok thank you
Do you think that motor is faster than the mofo ROP?
Gotta say im a bit disappointed. Performance looms fine and the proce is okay. But the entry kevel furitek combos arent much more and have Bluetooth programming and smaller escs
youre right and smaller esc, replaceable wire harness, integrated on/off switch, no silly seperate adapter plate, plus they come with a receiver so you dont have to replace the factory radio.
So you do a review on the motor but not the new body that came out
Please throw the injora combo in the trx4m monster truck
What TX are you using?
It's a Radiolink RC8X transmitter and a Radiolink R4FGM receiver.
@@viperfangs4848 Thank you!
👍🏼
It's a good motor, but no one has time to go on a laptop and program. Everything are they waterproof motors to
It’s a shame that there are sold out now.
Those shocks are holding it back.
It looks like it hasn’t enough torque for slow crawling, because almost every obstacle it passed with the punch. For the indoor course it is the worst result I’ve seen on this channel, considering that this wasn’t box stock rig
I want it!
WOW ‼️
Xt30 is not a wonky connector. It should be used on everything small scale… now everything else they included is wonky
I have a heck of a time finding anything to plug into the XT30
@@CapeCrawlers strange, I can’t find anything else… and if I do, I solder one on!
Nice Nice
If only it was waterproof
🔥🔥🔥
สินค้า หมดแล้ว 😅
It looks cool but a bit stone-age now plugging into a PC. The Furitek uses Bluetooth and App. So much better.
But for $60 I wouldn’t mind
Furitek is also double the price
For the price it sure seems fair too me 🤷🏻♂️
@@josiahrivas5827 not everyone has a computer these days. Everyone has a phone.
I'll plug it into a pc and save my broke ass some money. I can't be lazy I cost myself money 🤣🤣 that's how I look at it. If I was rich than sure lol
They lost me at the rats nest of wires to program it
Your skipping steps
Okayyy... guess you don't take valid criticism "like a champ"... clout and keeping your sponsors happy is more important, it seems... geezus... 🙄
Yo, sorry to interrupt but Can you please explain
Wrote some criticisms on his testing methods, but he erased the comment pretty much instantly...