Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMTk4NDY0MzY3fQ%3D%3D www.injora.com/products/injora-brushless-micro-mbl32-esc-1621-purple-viper-motor-combo-for-1-18-trx4m
I was lucky that injora sponsored me with the setup! It is the first time I install a brushless setup. It's all new to me and I've still got a lot to learn about it. And finally there is a system that is at an affordable price! And most important you can perfectly get it no matter where you are in the world. It's definitely a game changer!
Great little review! I'm really happy to have found a YTer who regularly features mini crawler modding and crawling. You have a new new subscriber! Obrigado!
Thank you so much bro! I'm glad you found my channel and even happier that you like my content! Thank you so much for the sub bro. I do focus a lot on the micro crawlers, and will be doing some full builds in the next week or two. Cherokee Jeep build and a ir60 6x6 build. I really appreciate you watching and commenting, thank you 🤜🤛
It's definitely a game changer, especially for those that found it difficult to purchase Furitek due to the price tag and the fact that there was many countries they don't ship to. I would love to test the system with the two speed transmission from Meus, but once again I've got a problem ordering from them where I live! Hopefully somebody else will do it soon enough. You can't text thanks for watching, and I really appreciate the comment.
It definitely is bro, so far I only have one brushless truck, and it's the furi wagon, so this was an awesome system to test. Performance wise, it's definitely quieter, and has the same modulation, but I feel it has more power and speed! But that could be because the furi wagon is on 2s not 3s like I got this one is on. I really wish they would come out with some 1/10 brushless systems 😁
the buttons are for changing the voltage input not the servos mine did not work till i set the toggle on the brushless esc to 6.5volts the set up says to put it to 7,5 volts IT did not work so i put them up x 2 running stock traxxas battery ...so the opposite of the instructions...THANKS FOR ALL YOU GREAT VIDEOS
Hello Andy it is great to see you my friend!! I have missed your comments over my last few videos! 😞 I hope you enjoy this one, thank you so much for the visit and comment brother! 🤜🤛
Definitely the 3s battery has given it a lot more punch! I also ran it on the scx24 2s battery, and it's still performed really well and had a lot of power and speed! But on the 2s battery it doesn't seem to want to run 7.2 volt to the servo! On 3s I have absolutely no problem up in the power to the servo. It's a great performing system for the price! Which makes it a lot more accessible for the people out there that don't have as much cash! Like me!! 😅🤣
Super! I don't have very much experience with crawlers at all. The Micro crawlers are so cool. It appears that micro crawlers are well supported and have so many cool upgrades like tires and rims. My fear is that they would be hard to work on as everything is so small and my eyesight is terrible. After watching this video I'm sold. Very awesome setup. Beautiful looking jeep.
In my opinion the two micro Crawlers that have the most after market parts out there, is the scx24 and the Traxxas trx4m, and the new redcat ascent! Many of the others also have upgrades but they are not manufactured by many companies so where is only a limited amount of choice. One of my favorite rigs stock out of the box, has got to be the hobby plus CR-18P Evo Trail hunter or Rock van!! Great value and doesn't need much to make it a fun capable crawler. Thank you bro and I also would like to say thank you for watching and commenting 🤜💥🤛
Very nice build. I am using the Furitek system in my TRX4M Defender and the difference is HUGE. It is actually a great truck now. Performing almost as good as the Fury Wagon ;)
Sorry for the late reply bro, for some reason I only found this comment now! I bet that system is awesome you running in your Defender, I really would like to try more Furitek products but it's extremely difficult to order from them where I live! The only experience I got with their systems is with my Fury wagon 🤪 I love that thing! it's a little beast!!
Awesome vid Ryan! Injora continues to impress me with the killer products they come up with for the mini crawlers, and they do it at a cost us financially challenged can afford. I guess my 4m is gonna be brushless, soon. 👍
Good morning Jonathan, definitely I am really impressed with a lot of the parts that injora have released over the last year and a half!! I will definitely be using this system in the future for any of my builds. It's a bit late for the 6x6 and for the Jeep Cherokee build as I've already ordered all the parts before this was launched. But that's fine because I also wanted to test the new MB 80. The price is definitely much more affordable than any other system I have seen! Making it a viable option for us. All I can say is that you are going to love it 👊😉
I will definitely be building a new crawler shortly, what transmission gears did you use and where can I get the .9mm hex and thanks a bundle for making this video, loved it
Awesome bro, I am still waiting on the parts I ordered to do my Jeep Cherokee injora build!!! Hopefully it will be here today or Monday! The 9 mm hex drive I'm using is from injora, I highly recommend this little set as it makes it easy to get into those tight spaces. I've been using them for 2 years and only now am I starting to need a new set. For the price I think they really worth it, here is a link www.injora.com/products/5pcs-0-9-1-27-1-3-1-5-2-0mm-hexagon-screwdriver-hex-screws-wrench-tools
Thank you Andy, it's the first thing I thought when I was testing it! It's a great system for the MT monster truck 🤪 If I'm lucky in a month from now or two I will find a MT here in Portugal! 😅 At least I finally got the Ford F-150 trx4m.
Impressive, it’s a mini hobbywing fusion motor . My only complaint is they didn’t give an adapter for Traxxas battery . I have 6 Trx4m and if I buy this I have to also buy a battery for it
They do supply the adapter for the Traxxas TRX4m batteries, for some reason it just wasn't in the box they sent me. I have checked and they have confirmed, that it does. Performance wise I was very impressed.
It felt like an eternity waiting for it to arrive in the mail! Injora was nice enough to send one out to me before it was released so I could install and test it and get a video up around the same time it was going to get released. Everything about the system is impressive from the price to the performance! Thank you for watching and commenting Patrick 👊😉
They do say it is for the 118 and 124 scale trucks, so I'm sure in the near future it will come with the mounting plate for the scx24 and red cat Ascent 18.
Awesome video brother…. I was just wondering what gear set your running in the transmission? Also I just purchased the injora 370 45t and Esc v2.. should I install them , as I’m looking for both worlds.. slow and fast? Thanks for all the awesome content, your videos inspired me to build my own crawler from the ground up
Bro I really appreciate that thank you very much. The brushless system is awesome but! I still like my 370 45t brushless setup with the mb100 I just purchased the setup again but with the MB80 for my next build. I'm going to be building a full injora Cherokee Jeep! And I might as well run all the parts I haven't used yet! Portal axles And the MB 80 and some of their awesome 1.3 rims. And I've also picked up a set of tires that I haven't seen before. So it's definitely going to be an interesting one.! I really appreciate the support bro, and I'm glad the videos have been helpful and inspirational. If in every video I post I Inspire one person!! That keeps me happy and motivated. Anything I can ever help with just let me know!!! 🤜💥🤛
It's definitely awesome and yes I believe it wouldn't be difficult to retrofit this to the other micro Crawlers. And I'm sure they will be coming out with the system for the scx24 ect. This is definitely a game changer 😉
It's definitely a must especially for the price they are at! It's a pleasure bro, I'm the one that appreciates you watching, and always leaving a comment 👊😉
That is amazing! I saw rumor that they were going to be making a waterproof version of the ESC in a few weeks or so. Might have to save some pennies to upgrade all the electronics, LOL
It's awesome but it would be even better if the ESC was waterproof!! Anyway like many other electronics I'm pretty sure it's not that difficult to waterproof this unit. I definitely recommend this setup, as for the price is unbeatable for the performance gains!
Hi, that is coll, thx You use 3S and which ratio. Do you use the crawler gears or the stock gears. What do you think about the Furitek Cedar, does the Cedar have more Power than this new Combo? Best regards from Germany
Hi bro 👋 Yes I ran the system on 3s but I also tested it on an scx24 2s battery, it worked perfectly fine as well. The gear ratio, is the 40.3 When it comes to comparing it to the Furitek Cedar motor, I can't give you my opinion on that as I've never run that system. Now comparing it to the system that comes in the furi wagon, the Venom motor! They perform pretty much the same, differences that I noticed are, the injora brushless system is definitely quieter, and even on 2s seems to have more power and wheel speed. And both of them provide the same awesome lowdown modulation. Like I've mentioned on my channel I have not had much experience with brushless systems yet. But I hope this helps. Thanks for watching bro and thanks for commenting 👊😉
Hi Ryan! What a great work - I so do dig your videos massively. Very inspirational!! One question: I run the stock traxxas electronics as well as the original battery and receiver / remote control. Do I have to upgrade it or can I just replace the motor with the new stuff which comes with the package? Thanks so much for an answer!
@@LukasRickDotCom hi Lucas 🤜🤛 Thank you very much I really appreciate you're awesome comment 😁 In order to run this system you would have to pick up a different receiver and transmitter combo. You will be able to use the original battery, as far as I know all the kits now come with an adapter cable to use the stock battery. You can just pick up a cheap Dumborc the transmitter and receiver combo like I used in this video. You can find them on eBay AliExpress, Amazon etc The one I used I ordered it from injora Hope that helps bro, anything else just let me know 👊😉
Bro I was certainly blown away by the low modulation and in the same torque and power this set up has got! It is such a pity that I already ordered the 370 motor and transmission for my next build! Or else I would have definitely picked this up instead. Just going to have to use it in my 6x6 build next 😉
Thank you, it's running reduction gears, but it's insane on 3s! I have a little bit of cooking issues, at about 10 to 15% power! Below that it's perfect and above that it's perfect! And it looks like lots of other people are having this problem. So just wait a bit before you order this kit to see if they resolve the issues. Thanks a lot for watching and I really appreciate the comment.
Maybe some wrong settings ? I had this with several Furitek motors when the "motor type" was not set correctly and gets just barely warm when correct. I understand there is some way to setup/programm this ESC although Injora website says its set perfectly and does not need changing as it comes. Just ordered mine. Curious if it performs like the Furitek products at less than a third of the cost.
@@DrKVo13 hello Thank you very much I'm glad you found the video helpful. Or I am deaf 😅 but it is completely silent! The only noise you hear is when it starts going faster you can hear the gears in the axles and in the transmission. The motor and escape is completely silent.
Bro, it's awesome! I've spent my whole day running it! There's a few little things I've noticed but nothing that would stop me from buying the unit and fitting it to every single one of my trucks! It feels very similar to the system that the furi wagon comes with from Furitek. Definitely a great little system.
Sick build i have a 1/18 trx4m injora build I'm getting a binding or like cogging when I am going from slow to load and adding speed. The injora team said I can adjust settings what are your ESC settings? I have the fat viper and 29/1 gears or whatever comes with their brushless combo
Thank you so much bro it turned out great, I also have a small amount of cooking between 15 and 17% throttle! The one question I have for you is are you running it on 3s? Because if I run mine on 2s it's way worse. So definitely take that into consideration.
I have seen a couple videos where people had some brownouts with their 2s lipos. Also on the injora page it shows it comes with an adapter for the original battery. Did yours come with one?
It came with a couple of adapters, and I see on their site that it's supposed to come with the trx4m battery adapter too. Seems like they didn't get into the box they sent to me. But it did have an adapter for the scx24 battery, and I did test it, and it seemed to work perfectly fine.
Did I miss it or was the gears were still all stock on trans thru wheels? Also would be good to have another rig for comparison including one with furitek And what are the drawbacks? No anything is free of cons and drawbacks
I did mention in the video that I am using a brass transmission with 40.3 gear set, which is the reduction gears. I will I just didn't have enough time as I was trying to get this video out as quick as possible. I will see if tomorrow I get out with the furi wagon and the jeep, so I can do some comparisons. Honestly I didn't find any drawbacks to the system, it is extremely smooth, quiet and has great modulation at low RPM. It also has an insane amount of power and speed on 3s. I do notice sometimes that it likes to shudder but it is barely noticeable. For the price I don't think we will find anything better.
No you didn't, as this part was sent to me before release date! It didn't come with the adapter for the trx4m battery. I did test it off camera on the scx24 2s battery, and it worked perfectly fine. It had great modulation and some insane power and speed! Definitely less than with the 3s. But I did notice on the 2s if you change the dip switch, 27.2 volt for the servo it likes to cut out! So if you going to be running 2s I recommend keeping it on 6 volt for your Servo.
It's definitely a game-changer bro! Finally a brushless setup that works excellently and affordable price and accessible to anyone in the world!! Thanks for watching bro and thanks for commenting 🤜💥🤛
Well at least it's a much better price than Furitek!! Can I guarantee you it is worth it. If I ever make it on RUclips!! I will send you one! Better than that I will send you a whole truck! 😅 Thank you bro and I also want to say thank you very much for watching and commenting. 👊😉
It is for sure wayyyy better priced than furitek. In my opinion furitek is a bit overpriced compared to what you get, especially when you can get that injora one for way cheaper which crawles just as well as furitek! And thanks for the hope of getting one😅 No problem and thanks for entertaining me and several others.😎👊
Good day bro, thank you for the review! I still don’t understand, does this motor provide the same torque as brushed 180 87t / 370 45t? My IR40 build is a copy of yours, and it’s very heavy, 180 motor simply doesn’t have enough drag brake to hold it, so I use 370 45t. Will this brushless motor provide enough torque and drag brake for 1.2kg rig?
Good morning bro, it's a pleasure thanks for watching, and commenting 🤜💥🤛 No it does not provide the same torque as the 180 motor! It provides a hell of a lot more 🤪 It would be a great system for your IR 40 build, and yes the 180 motor if you still running the 87t it would be too weak to have enough drag brake! The purple 48 turn motor from enduro would be a lot better. But as you are using the 370 it's about the same as the 48t 180 motor. This has much better modulation, about the same drag brake as the 370 motor, and a heck of a lot more torque and speed. There is also a program available for PC and this brushless motor comes with a unit so you can connect it to the PC. In that program you can set your drag brake wherever you want!! Don't be in a rush let us all figure out the program and the best setups! But I am sure this would turn your IR 40 into the ultimate rig! 👊😉
That's really funny, I actually need to pick up some of those! As I'm still running the original electronics in the Bronco Defender and high Trail! And it would be nice to customize the controller a bit. This is definitely an awesome setup! Why not do a full build, like that you need to buy a new controller anyway. 😅 And with this brushless setup it can be your ultimate rig 😅 Two weeks ago I ordered everything for the Cherokee Jeep build, and this system wasn't out yet, so I guess I'm still going to be running the 370 motor with the MB80. And for some reason it is taking a very long time to arrive! I really appreciate you watching bro and thank you for the comment. 🤜💥🤛
Muito obrigado António, é uma excelente novidade de injora! Há muito tempo que eu tava à espera que eles saiam com uma sistema brushless, para os 1/10, e de repente saiem com isto! Espero que em breve haverá para os 1/10!! Fiquei mesmo impressionar com o performance deste sistema! Como sempre António Muito obrigado pela visita e pelo comentário 👊😉
It is completely silent, it definitely doesn't screech like my Furi wagon. I tried to hear the motor and I can't At high speed all I hear is the gears. It's a very impressive system!
Bro I'm not 100% sure because I didn't install the gears, this is the transmission I removed from the 6x6 chassis I bought on AliExpress. So I am really not 100% certain if it is stuck during or reduction gears. But I do believe it is the reduction gears. As soon as I can I will grab another transmission from injora with the reduction gears and check if there's any difference. Don't forget it is on 3s and that really does give it that extra wheel speed.
Well I can definitely tell you don't think no more! because this system is awesome! It's got so much wheel speed with the reduction gears that I wouldn't be worried about running it on the stock gearing. But I'm sure it would still run really nicely with the system and the stock gears. I will order another system like, this and we will do some testing! Really appreciate you watching and commenting bro.
This body was released last year by injora, they also have the IR 40, which looks like an FJ40 Cruiser, and they have just released the Jeep Cherokee body!
Thanks for yet another informative video. After building IR40 based on your setup I learned how much slower the Injora 180 brushed motor with underdrive gear set is and how fast the traxxas stock battery drains vs my trx4m bronco. So now I’m wondering - what is the exact injora product I should get to achieve this level of low-high speed performance you demonstrated? I’m guessing I need to put aside the 180 PRO 48T engine with UD-59% transmission and the MB100-R80 ESC, but I also need standard transmission to add to the new injora brushless set? What would be a compatibile powerful 3s lipo (I’m thinking of comparable to stock trx4m range of ~1h). Is there a plug-n-play ready to go combo set from Injora for this setup that can be added to IR40 build(couldn’t find it, but maybe I’m missing something)? Thanks!
@@MarekGrodzicki thank you very much, you can keep the transmission with the with the reduction gears and just fit does brushless setup to it! It will give you exactly the same performance that you see in this video. But you will need a 3s battery. I did explain individual that I bought this 3s battery from my local hobby store which is an outdated 3s battery, I then had to solder on my own fitting so it could match with what came with the system. Just ask on Facebook groups what battery and where people are getting them so you can pick yourself up at 3s battery that is compatible with this brushless system. It's been difficult for me to find any 3s batteries that I can order living here in Portugal.
@@MarekGrodzicki and no there is no battery for sale from injora. You will have to find a 3s battery online that is compatible with the adapters they provide. Just ask around on Facebook trx4m groups, somebody will point you in the right direction. At the moment I am not near my computer or at home so can't really help you out. Soon I will be back and I will be more helpful. I really appreciate you watching and commenting bro and I'm sorry for taking so long to reply.
@@MarekGrodzicki and no there is no battery for sale from injora. You will have to find a 3s battery online that is compatible with the adapters they provide. Just ask around on Facebook trx4m groups, somebody will point you in the right direction. At the moment I am not near my computer or at home so can't really help you out. Soon I will be back and I will be more helpful. I really appreciate you watching and commenting bro and I'm sorry for taking so long to reply.
@@rcfungamesthank you for detailed expalination. Really appreciate it. I’m learning all the basics trying to get a better picture of the mini RC world. This purple viper is currently sold out everywhere across the web, so I gotta be patient.😂 I see many options to order 3s lipos. The problem is where to store them as they can go ablaze pretty nasty in case of malfunction.😅 Also I noticed Injora released fat viper, but seems like it won’t give me that crazy wheel speed I want and requires the 370 to fit/work. BTW - I just got back from Lisbon and Colares vacation - great people, food and amazing views. Love Portugal! Have a great day!
It would be awesome in a little monster truck! I do believe they are going to make this system, adaptable to most of the micro Crawlers. I will ask the next time I talk to them.
I can't give you that onset as I do not own a redcat ascent. But I'm pretty sure they will be coming out with this system for all the micro Crawlers they make parts for.
This Jeep didn't come with anything as it is a build from the ground up! The that I originally used was the V1 370 motor transmission combo from Injora And like I mentioned in the video, the 370 transmission, is not compatible with this brushless unit. You would have to pick up the original transmission design for this setup to fit just like I did.
Just right on time after I finished my second TRX4M Defender built. 😂 So I think I need to reinvest some money into this system. Does it work with the light kit, the stock battery and the stock remote control?
Same here, I just ordered over 700 bucks worth of parts for my next two builds! And it would have been really nice to have used this system in them. But I guess it's too late now 😅 No it will not work with the light kit! The stock battery I believe they are including an adapter now! But if you wanted to run the stock remote you will need a Traxxas receiver. Hope that helps 👊😉
@@rcfungames Thanks a lot for your answer. Well. I do have two Defender builds. One to use indoors and one for the trails. I absolutely love what they are doing for the scale world and their quality is mostly superior. Anyways. I appreciate your videos and love watching them. Best regards. Edit: in this case I've to stick with the stock receiver unit because I have to have my lights 😂
@@Bonecrusher-ht1mh it's a pleasure bro, thank you for the support. I am exactly the same that's why I've kept my stock electronics, in my Bronco Defender and K10, and I just got the Ford F-150 finally!! And I will definitely keep the stock electronics and that one as well just because of the light kit! I love the scale light especially when I crawl around my course at night. 😅🤜💥🤛
I can do better than that, I can share you a link too the build video of the trx4m Jeep In the description of the video you will find all the parts used, and a link to each product. ruclips.net/video/BYIKg5NY1mk/видео.htmlsi=Ad5nb2qt7SfvlDDe
@@drakerestrepo6308 if you are still running the stock remote, yes you will! You can pick up a six channel receive and transmit to combo from Injora that works great
I am running the low gears in the transmission! It's got amazing modulation and some insane power and speed!! All around excellent setup for the price!
Yes I am running a 3s battery, which I showed and mentioned a few times in the video. I also tried it on an axial scx24 2s battery and it works great! Also has great modulation and some serious power and speed! Of course with the 3s you have a bit more punch! 💯
I built this Jeep last year sometime, you can get this body from injora. Besides the chassis everything else was also purchased from Injora, using trx4m upgrades. Here is the build video. ruclips.net/video/BYIKg5NY1mk/видео.htmlsi=8s4aptuxcZBu1fAU
It is the reduction gears that I am running in the transmission. The motors got such a high KV that it's got tons of wheel speed. I will probably throw under drive in the front and rear axle, to gear it down a little bit more
@@rcfungames yes I did, I purchased three to put on different vehicles and only one worked right. I’m sending them back and trying again. The one I did get working is working great.
No the electronic unit is not waterproof, but apparently the OutRunner motor is. I believe they will be coming out with the adoptions you will need for it to fit the scx24 and other micro Crawlers. I know that this system is compatible with other 32 a.m. systems. Like I have mentioned on my channel in other videos I am not very familiar with brushless setups. I'm hoping over the next year or two I will do a lot more installations and testing with brushless systems.
Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMTk4NDY0MzY3fQ%3D%3D
www.injora.com/products/injora-brushless-micro-mbl32-esc-1621-purple-viper-motor-combo-for-1-18-trx4m
Finally Injora did it. I love it. Thx for showing.
Totally agree bro!! I had been waiting for this for a long time!
It's a pleasure, thank you for watching and commenting 🤜🤛
@@rcfungames Let's see if they release something like this for FCX18..... would be insane.
I’m so happy you did a video on this setup! This sold me even more on it! My first brushless setup!
I was lucky that injora sponsored me with the setup! It is the first time I install a brushless setup.
It's all new to me and I've still got a lot to learn about it.
And finally there is a system that is at an affordable price!
And most important you can perfectly get it no matter where you are in the world.
It's definitely a game changer!
Great little review! I'm really happy to have found a YTer who regularly features mini crawler modding and crawling. You have a new new subscriber! Obrigado!
Thank you so much bro! I'm glad you found my channel and even happier that you like my content!
Thank you so much for the sub bro.
I do focus a lot on the micro crawlers, and will be doing some full builds in the next week or two.
Cherokee Jeep build and a ir60 6x6 build.
I really appreciate you watching and commenting, thank you 🤜🤛
Glad Injora released a reasonable priced brushless system compared to the Furitek. We should see how well it works with Meus 2 speed transmission
It's definitely a game changer, especially for those that found it difficult to purchase Furitek due to the price tag and the fact that there was many countries they don't ship to.
I would love to test the system with the two speed transmission from Meus, but once again I've got a problem ordering from them where I live!
Hopefully somebody else will do it soon enough.
You can't text thanks for watching, and I really appreciate the comment.
Game changer.. i don't own a brushless system always thought they shouldn't cost as much as a 1/10 system...this looks promising 🤔
It definitely is bro, so far I only have one brushless truck, and it's the furi wagon, so this was an awesome system to test.
Performance wise, it's definitely quieter, and has the same modulation, but I feel it has more power and speed! But that could be because the furi wagon is on 2s not 3s like I got this one is on.
I really wish they would come out with some 1/10 brushless systems 😁
@@rcfungames definitely that's awesome brother
C'est impressionnant 😮
It really is impressive!! Especially for the price tag! I think it's 100% worth it 💯👍💯
the buttons are for changing the voltage input not the servos mine did not work till i set the toggle on the brushless esc to 6.5volts the set up says to put it to 7,5 volts IT did not work so i put them up x 2 running stock traxxas battery ...so the opposite of the instructions...THANKS FOR ALL YOU GREAT VIDEOS
That’s awesome dude, yeah I’m here watching 6:56 PM Thursday, June 27 yay👍👍😎
Hello Andy it is great to see you my friend!! I have missed your comments over my last few videos! 😞
I hope you enjoy this one, thank you so much for the visit and comment brother! 🤜🤛
That new high speed can partially be credited to the 3s battery. This motor and ESC is on my list.
Definitely the 3s battery has given it a lot more punch! I also ran it on the scx24 2s battery, and it's still performed really well and had a lot of power and speed!
But on the 2s battery it doesn't seem to want to run 7.2 volt to the servo!
On 3s I have absolutely no problem up in the power to the servo.
It's a great performing system for the price!
Which makes it a lot more accessible for the people out there that don't have as much cash!
Like me!! 😅🤣
Super! I don't have very much experience with crawlers at all. The Micro crawlers are so cool. It appears that micro crawlers are well supported and have so many cool upgrades like tires and rims. My fear is that they would be hard to work on as everything is so small and my eyesight is terrible. After watching this video I'm sold. Very awesome setup. Beautiful looking jeep.
In my opinion the two micro Crawlers that have the most after market parts out there, is the scx24 and the Traxxas trx4m, and the new redcat ascent!
Many of the others also have upgrades but they are not manufactured by many companies so where is only a limited amount of choice.
One of my favorite rigs stock out of the box, has got to be the hobby plus CR-18P Evo Trail hunter or Rock van!!
Great value and doesn't need much to make it a fun capable crawler.
Thank you bro and I also would like to say thank you for watching and commenting 🤜💥🤛
Very nice build. I am using the Furitek system in my TRX4M Defender and the difference is HUGE. It is actually a great truck now. Performing almost as good as the Fury Wagon ;)
Sorry for the late reply bro, for some reason I only found this comment now!
I bet that system is awesome you running in your Defender, I really would like to try more Furitek products but it's extremely difficult to order from them where I live!
The only experience I got with their systems is with my Fury wagon 🤪
I love that thing! it's a little beast!!
Definitely gonna have to get the system. 🔥
For the price tag and the performance gains!! It is definitely 100% worth it!!
Now I'm waiting for a 110 scale brushless system 😅
OMGoodness Ryan, I can't wait to get my hands on one of these! Great work INJORA!
Bro you got to get one! this thing is awesome!!! Especially on 3s! 🤪
100% great work injora!! 💯💯💯
@@rcfungames I want to do an IJORA build but funds are not allowing that right now. Soon though.
Awesome vid Ryan! Injora continues to impress me with the killer products they come up with for the mini crawlers, and they do it at a cost us financially challenged can afford. I guess my 4m is gonna be brushless, soon. 👍
Good morning Jonathan, definitely I am really impressed with a lot of the parts that injora have released over the last year and a half!!
I will definitely be using this system in the future for any of my builds.
It's a bit late for the 6x6 and for the Jeep Cherokee build as I've already ordered all the parts before this was launched.
But that's fine because I also wanted to test the new MB 80.
The price is definitely much more affordable than any other system I have seen!
Making it a viable option for us.
All I can say is that you are going to love it 👊😉
Oh man.
That is awesome.
I think I will buy one for each of my rigs😃👍💯
Definitely done I would recommend picking up a few of these! Insane performance for the price!
I will definitely be building a new crawler shortly, what transmission gears did you use and where can I get the .9mm hex and thanks a bundle for making this video, loved it
Awesome bro, I am still waiting on the parts I ordered to do my Jeep Cherokee injora build!!!
Hopefully it will be here today or Monday!
The 9 mm hex drive I'm using is from injora, I highly recommend this little set as it makes it easy to get into those tight spaces.
I've been using them for 2 years and only now am I starting to need a new set.
For the price I think they really worth it, here is a link
www.injora.com/products/5pcs-0-9-1-27-1-3-1-5-2-0mm-hexagon-screwdriver-hex-screws-wrench-tools
That’s awesome love it, I thought of getting one for my MT monster truck to get more speed
Thank you Andy, it's the first thing I thought when I was testing it! It's a great system for the MT monster truck 🤪
If I'm lucky in a month from now or two I will find a MT here in Portugal! 😅
At least I finally got the Ford F-150 trx4m.
Impressive, it’s a mini hobbywing fusion motor . My only complaint is they didn’t give an adapter for Traxxas battery . I have 6 Trx4m and if I buy this I have to also buy a battery for it
They do supply the adapter for the Traxxas TRX4m batteries, for some reason it just wasn't in the box they sent me.
I have checked and they have confirmed, that it does.
Performance wise I was very impressed.
@@rcfungames even better , now I have to get one !!
I was hopping that you where going to do that brushless system ❤🎉
It felt like an eternity waiting for it to arrive in the mail!
Injora was nice enough to send one out to me before it was released so I could install and test it and get a video up around the same time it was going to get released.
Everything about the system is impressive from the price to the performance!
Thank you for watching and commenting Patrick 👊😉
Cheers Ryan nice and to the point mate.
Thank you bro, I really appreciate that mate! 🤜🤛
I wonder if Injora is gonna make it for the Ascent 18
They do say it is for the 118 and 124 scale trucks, so I'm sure in the near future it will come with the mounting plate for the scx24 and red cat Ascent 18.
Awesome video brother…. I was just wondering what gear set your running in the transmission? Also I just purchased the injora 370 45t and Esc v2.. should I install them , as I’m looking for both worlds.. slow and fast? Thanks for all the awesome content, your videos inspired me to build my own crawler from the ground up
Bro I really appreciate that thank you very much.
The brushless system is awesome but! I still like my 370 45t brushless setup with the mb100
I just purchased the setup again but with the MB80 for my next build.
I'm going to be building a full injora Cherokee Jeep!
And I might as well run all the parts I haven't used yet! Portal axles And the MB 80 and some of their awesome 1.3 rims.
And I've also picked up a set of tires that I haven't seen before.
So it's definitely going to be an interesting one.!
I really appreciate the support bro, and I'm glad the videos have been helpful and inspirational.
If in every video I post I Inspire one person!! That keeps me happy and motivated.
Anything I can ever help with just let me know!!! 🤜💥🤛
Yeah this looks awesome reckon I could retro fit to the scx24 🤘
It's definitely awesome and yes I believe it wouldn't be difficult to retrofit this to the other micro Crawlers.
And I'm sure they will be coming out with the system for the scx24 ect.
This is definitely a game changer 😉
I can see one in my future lol
Thanks for sharing awesome video as always
It's definitely a must especially for the price they are at!
It's a pleasure bro, I'm the one that appreciates you watching, and always leaving a comment 👊😉
That is amazing! I saw rumor that they were going to be making a waterproof version of the ESC in a few weeks or so. Might have to save some pennies to upgrade all the electronics, LOL
It's awesome but it would be even better if the ESC was waterproof!!
Anyway like many other electronics I'm pretty sure it's not that difficult to waterproof this unit.
I definitely recommend this setup, as for the price is unbeatable for the performance gains!
Hi, that is coll, thx
You use 3S and which ratio. Do you use the crawler gears or the stock gears.
What do you think about the Furitek Cedar, does the Cedar have more Power than this new Combo? Best regards from Germany
Hi bro 👋
Yes I ran the system on 3s but I also tested it on an scx24 2s battery, it worked perfectly fine as well.
The gear ratio, is the 40.3
When it comes to comparing it to the Furitek Cedar motor, I can't give you my opinion on that as I've never run that system.
Now comparing it to the system that comes in the furi wagon, the Venom motor! They perform pretty much the same, differences that I noticed are, the injora brushless system is definitely quieter, and even on 2s seems to have more power and wheel speed.
And both of them provide the same awesome lowdown modulation.
Like I've mentioned on my channel I have not had much experience with brushless systems yet.
But I hope this helps.
Thanks for watching bro and thanks for commenting 👊😉
What wheels are on your jeep ? They look awesome
I am running to 63 mm by 24 mm swamp stumper injora tires 😉
They are still some of my favorite tires they make!
Looks so good! Nice video 👍
Thank you so much bro 🤜🤛
Looks awesome ordered me one 😎👍
It really is awesome bro! you're going to love it 💯💯💯
Hi Ryan! What a great work - I so do dig your videos massively. Very inspirational!!
One question: I run the stock traxxas electronics as well as the original battery and receiver / remote control. Do I have to upgrade it or can I just replace the motor with the new stuff which comes with the package?
Thanks so much for an answer!
@@LukasRickDotCom
hi Lucas 🤜🤛
Thank you very much I really appreciate you're awesome comment 😁
In order to run this system you would have to pick up a different receiver and transmitter combo.
You will be able to use the original battery, as far as I know all the kits now come with an adapter cable to use the stock battery.
You can just pick up a cheap Dumborc the transmitter and receiver combo like I used in this video.
You can find them on eBay AliExpress, Amazon etc
The one I used I ordered it from injora
Hope that helps bro, anything else just let me know 👊😉
Nice test and the speed and torque 😳
I have the 370 motor and i already want to change
looking forward to their other brushless motor 2204 🎉
Bro I was certainly blown away by the low modulation and in the same torque and power this set up has got!
It is such a pity that I already ordered the 370 motor and transmission for my next build!
Or else I would have definitely picked this up instead.
Just going to have to use it in my 6x6 build next 😉
what size tires? they look so good on here..
I believe these are 63 mm by 24 mm, and they are the swamp stomper injora tire
Realy cool 💪
It's definitely cool, and a massive game changer, as it is at a very affordable price.
Cool Video, 👍
…is it running some crawler gears or is it stock?
Thank you, it's running reduction gears, but it's insane on 3s!
I have a little bit of cooking issues, at about 10 to 15% power!
Below that it's perfect and above that it's perfect! And it looks like lots of other people are having this problem.
So just wait a bit before you order this kit to see if they resolve the issues.
Thanks a lot for watching and I really appreciate the comment.
Awesome video as always,what gearing did you use in the transmission?crawler gears?
Thank you so much bro, yes I am running the reduction gears.
And it got plenty of speed, and really awesome lowdown modulation 💯💯
@@rcfungamesdoes it provide good torque?
Ça m’a vraiment l’air super. Quel émetteur (télécommande) il faut acheter?
Superbe vidéo. Merci
It's awesome bro, I just went for a Dumborc combo from injora
I use them all the time and once again it works really well with the system.
@@rcfungames thanks 👍
@@rcfungames is this model I can take : DUMBORC 6CH 6 Canaux 2.4GHZ X6PM-350 4.8-12V RC Mini Transmetteur
@@laurenthochart7605 that should work perfectly 👍
I cannot believe that no one thinks of taking a temp gun to that tiny motor because you know it's running extremely hot.
I don't own a temp gun! And I checked it multiple times and it was barely warm!
Maybe some wrong settings ? I had this with several Furitek motors when the "motor type" was not set correctly and gets just barely warm when correct. I understand there is some way to setup/programm this ESC although Injora website says its set perfectly and does not need changing as it comes. Just ordered mine. Curious if it performs like the Furitek products at less than a third of the cost.
Man, that is just so damn cool.
Bro for the price! I think it's unbeatable! It's so smooth and quiet! And then it's got some insane power and wheel speed!
Great setup!
Hello
Great video. Very useful.
Do you know if these esc makes ultrasonic noise ? And if it does. So you if it can cause ear damage ?
@@DrKVo13 hello
Thank you very much I'm glad you found the video helpful.
Or I am deaf 😅 but it is completely silent!
The only noise you hear is when it starts going faster you can hear the gears in the axles and in the transmission.
The motor and escape is completely silent.
So great 😮
💯💯👊😉💯💯
Seems to be very good❤
Bro, it's awesome! I've spent my whole day running it! There's a few little things I've noticed but nothing that would stop me from buying the unit and fitting it to every single one of my trucks!
It feels very similar to the system that the furi wagon comes with from Furitek.
Definitely a great little system.
Sick build i have a 1/18 trx4m injora build I'm getting a binding or like cogging when I am going from slow to load and adding speed. The injora team said I can adjust settings what are your ESC settings? I have the fat viper and 29/1 gears or whatever comes with their brushless combo
Thank you so much bro it turned out great, I also have a small amount of cooking between 15 and 17% throttle!
The one question I have for you is are you running it on 3s?
Because if I run mine on 2s it's way worse.
So definitely take that into consideration.
I have seen a couple videos where people had some brownouts with their 2s lipos. Also on the injora page it shows it comes with an adapter for the original battery. Did yours come with one?
It came with a couple of adapters, and I see on their site that it's supposed to come with the trx4m battery adapter too.
Seems like they didn't get into the box they sent to me.
But it did have an adapter for the scx24 battery, and I did test it, and it seemed to work perfectly fine.
Did I miss it or was the gears were still all stock on trans thru wheels?
Also would be good to have another rig for comparison including one with furitek
And what are the drawbacks? No anything is free of cons and drawbacks
I did mention in the video that I am using a brass transmission with 40.3 gear set, which is the reduction gears.
I will I just didn't have enough time as I was trying to get this video out as quick as possible.
I will see if tomorrow I get out with the furi wagon and the jeep, so I can do some comparisons.
Honestly I didn't find any drawbacks to the system, it is extremely smooth, quiet and has great modulation at low RPM.
It also has an insane amount of power and speed on 3s.
I do notice sometimes that it likes to shudder but it is barely noticeable.
For the price I don't think we will find anything better.
Did I miss the part where you can use the stock 7.4v trx4m battery with this system?
No you didn't, as this part was sent to me before release date! It didn't come with the adapter for the trx4m battery.
I did test it off camera on the scx24 2s battery, and it worked perfectly fine.
It had great modulation and some insane power and speed! Definitely less than with the 3s.
But I did notice on the 2s if you change the dip switch, 27.2 volt for the servo it likes to cut out!
So if you going to be running 2s I recommend keeping it on 6 volt for your Servo.
This is really amazing
It's definitely a game-changer bro!
Finally a brushless setup that works excellently and affordable price and accessible to anyone in the world!!
Thanks for watching bro and thanks for commenting 🤜💥🤛
man i really wish i were rich enough to get that. great video bro!
Well at least it's a much better price than Furitek!! Can I guarantee you it is worth it.
If I ever make it on RUclips!! I will send you one! Better than that I will send you a whole truck! 😅
Thank you bro and I also want to say thank you very much for watching and commenting.
👊😉
It is for sure wayyyy better priced than furitek. In my opinion furitek is a bit overpriced compared to what you get, especially when you can get that injora one for way cheaper which crawles just as well as furitek! And thanks for the hope of getting one😅 No problem and thanks for entertaining me and several others.😎👊
Good day bro, thank you for the review! I still don’t understand, does this motor provide the same torque as brushed 180 87t / 370 45t? My IR40 build is a copy of yours, and it’s very heavy, 180 motor simply doesn’t have enough drag brake to hold it, so I use 370 45t. Will this brushless motor provide enough torque and drag brake for 1.2kg rig?
Good morning bro, it's a pleasure thanks for watching, and commenting 🤜💥🤛
No it does not provide the same torque as the 180 motor! It provides a hell of a lot more 🤪
It would be a great system for your IR 40 build, and yes the 180 motor if you still running the 87t it would be too weak to have enough drag brake! The purple 48 turn motor from enduro would be a lot better.
But as you are using the 370 it's about the same as the 48t 180 motor.
This has much better modulation, about the same drag brake as the 370 motor, and a heck of a lot more torque and speed.
There is also a program available for PC and this brushless motor comes with a unit so you can connect it to the PC.
In that program you can set your drag brake wherever you want!!
Don't be in a rush let us all figure out the program and the best setups!
But I am sure this would turn your IR 40 into the ultimate rig! 👊😉
Man, I just updated my stock traxxas remotes with the Injora steering wheels. Lol But dang it, this looks tempting. Lol
That's really funny, I actually need to pick up some of those!
As I'm still running the original electronics in the Bronco Defender and high Trail! And it would be nice to customize the controller a bit.
This is definitely an awesome setup! Why not do a full build, like that you need to buy a new controller anyway. 😅
And with this brushless setup it can be your ultimate rig 😅
Two weeks ago I ordered everything for the Cherokee Jeep build, and this system wasn't out yet, so I guess I'm still going to be running the 370 motor with the MB80.
And for some reason it is taking a very long time to arrive!
I really appreciate you watching bro and thank you for the comment.
🤜💥🤛
@rcfungames That's awesome though, very awesome! 💪🏼
Um Bom Review desta novidade da Injora!!!
A ver se também começam a pensar nos 1/10 HéHéHé 😂
🐻❄️🏁🐼👍🏻
Muito obrigado António, é uma excelente novidade de injora! Há muito tempo que eu tava à espera que eles saiam com uma sistema brushless, para os 1/10, e de repente saiem com isto!
Espero que em breve haverá para os 1/10!!
Fiquei mesmo impressionar com o performance deste sistema!
Como sempre António Muito obrigado pela visita e pelo comentário 👊😉
De nada Amigo ❤
Forte Abraço 🎉
I like what I'm seeing. How loud is the motor? Is it quietervthan the fury ones? The fury system sounds whiney from the videos I've seen
It is completely silent, it definitely doesn't screech like my Furi wagon.
I tried to hear the motor and I can't
At high speed all I hear is the gears.
It's a very impressive system!
Are you running stock gear ratio, or the crawler gears?
Bro I'm not 100% sure because I didn't install the gears, this is the transmission I removed from the 6x6 chassis I bought on AliExpress.
So I am really not 100% certain if it is stuck during or reduction gears.
But I do believe it is the reduction gears.
As soon as I can I will grab another transmission from injora with the reduction gears and check if there's any difference.
Don't forget it is on 3s and that really does give it that extra wheel speed.
Thinking about this for a TRX4M build do I need to still do the lower crawling gears or with the modulation can you use the standard gearing?
Well I can definitely tell you don't think no more! because this system is awesome!
It's got so much wheel speed with the reduction gears that I wouldn't be worried about running it on the stock gearing.
But I'm sure it would still run really nicely with the system and the stock gears.
I will order another system like, this and we will do some testing!
Really appreciate you watching and commenting bro.
What body is that? I didnt know someone made a jeep body for the trx4m
This body was released last year by injora, they also have the IR 40, which looks like an FJ40 Cruiser, and they have just released the Jeep Cherokee body!
Thanks for yet another informative video. After building IR40 based on your setup I learned how much slower the Injora 180 brushed motor with underdrive gear set is and how fast the traxxas stock battery drains vs my trx4m bronco.
So now I’m wondering - what is the exact injora product I should get to achieve this level of low-high speed performance you demonstrated? I’m guessing I need to put aside the 180 PRO 48T engine with UD-59% transmission and the MB100-R80 ESC, but I also need standard transmission to add to the new injora brushless set?
What would be a compatibile powerful 3s lipo (I’m thinking of comparable to stock trx4m range of ~1h). Is there a plug-n-play ready to go combo set from Injora for this setup that can be added to IR40 build(couldn’t find it, but maybe I’m missing something)?
Thanks!
@@MarekGrodzicki thank you very much, you can keep the transmission with the with the reduction gears and just fit does brushless setup to it!
It will give you exactly the same performance that you see in this video.
But you will need a 3s battery.
I did explain individual that I bought this 3s battery from my local hobby store which is an outdated 3s battery, I then had to solder on my own fitting so it could match with what came with the system.
Just ask on Facebook groups what battery and where people are getting them so you can pick yourself up at 3s battery that is compatible with this brushless system.
It's been difficult for me to find any 3s batteries that I can order living here in Portugal.
@@MarekGrodzicki and no there is no battery for sale from injora.
You will have to find a 3s battery online that is compatible with the adapters they provide.
Just ask around on Facebook trx4m groups, somebody will point you in the right direction.
At the moment I am not near my computer or at home so can't really help you out.
Soon I will be back and I will be more helpful.
I really appreciate you watching and commenting bro and I'm sorry for taking so long to reply.
@@MarekGrodzicki and no there is no battery for sale from injora.
You will have to find a 3s battery online that is compatible with the adapters they provide.
Just ask around on Facebook trx4m groups, somebody will point you in the right direction.
At the moment I am not near my computer or at home so can't really help you out.
Soon I will be back and I will be more helpful.
I really appreciate you watching and commenting bro and I'm sorry for taking so long to reply.
@@rcfungamesthank you for detailed expalination. Really appreciate it. I’m learning all the basics trying to get a better picture of the mini RC world.
This purple viper is currently sold out everywhere across the web, so I gotta be patient.😂
I see many options to order 3s lipos. The problem is where to store them as they can go ablaze pretty nasty in case of malfunction.😅
Also I noticed Injora released fat viper, but seems like it won’t give me that crazy wheel speed I want and requires the 370 to fit/work.
BTW - I just got back from Lisbon and Colares vacation - great people, food and amazing views. Love Portugal!
Have a great day!
I want that for my monster truck build scx24. Will they becoming out with ine
It would be awesome in a little monster truck!
I do believe they are going to make this system, adaptable to most of the micro Crawlers.
I will ask the next time I talk to them.
😮👍😁
You must grab one of these little brushless kits, you are going to love how we transforms the truck.
It's an excellent little setup.
😉💯💯💯
Would this fit on the redcat ascent 18
I can't give you that onset as I do not own a redcat ascent.
But I'm pretty sure they will be coming out with this system for all the micro Crawlers they make parts for.
Will this work on the stock transmission that comes in that jeep
This Jeep didn't come with anything as it is a build from the ground up!
The that I originally used was the V1 370 motor transmission combo from Injora
And like I mentioned in the video, the 370 transmission, is not compatible with this brushless unit.
You would have to pick up the original transmission design for this setup to fit just like I did.
Just right on time after I finished my second TRX4M Defender built. 😂
So I think I need to reinvest some money into this system.
Does it work with the light kit, the stock battery and the stock remote control?
Same here, I just ordered over 700 bucks worth of parts for my next two builds! And it would have been really nice to have used this system in them.
But I guess it's too late now 😅
No it will not work with the light kit! The stock battery I believe they are including an adapter now! But if you wanted to run the stock remote you will need a Traxxas receiver.
Hope that helps 👊😉
@@rcfungames Thanks a lot for your answer.
Well. I do have two Defender builds. One to use indoors and one for the trails.
I absolutely love what they are doing for the scale world and their quality is mostly superior.
Anyways. I appreciate your videos and love watching them. Best regards.
Edit: in this case I've to stick with the stock receiver unit because I have to have my lights 😂
@@Bonecrusher-ht1mh it's a pleasure bro, thank you for the support.
I am exactly the same that's why I've kept my stock electronics, in my Bronco Defender and K10, and I just got the Ford F-150 finally!! And I will definitely keep the stock electronics and that one as well just because of the light kit!
I love the scale light especially when I crawl around my course at night.
😅🤜💥🤛
could you give me a parts list? i really like this build
I can do better than that, I can share you a link too the build video of the trx4m Jeep
In the description of the video you will find all the parts used, and a link to each product.
ruclips.net/video/BYIKg5NY1mk/видео.htmlsi=Ad5nb2qt7SfvlDDe
@@rcfungames ok i have the meus racing portals, do you reckon i need the straight axles? and where do i get the inner mud guards from
Is it stock gearing in transmission
@@nickboob251 this is with the reduction gears!
The KV of the motor is so high that it's got some insane wheel speed.
Do I need a new remote for this
@@drakerestrepo6308 if you are still running the stock remote, yes you will!
You can pick up a six channel receive and transmit to combo from Injora that works great
What gear ratio ? Stock or low ?
I am running the low gears in the transmission! It's got amazing modulation and some insane power and speed!!
All around excellent setup for the price!
Are you running a 3s battery?
Yes I am running a 3s battery, which I showed and mentioned a few times in the video.
I also tried it on an axial scx24 2s battery and it works great! Also has great modulation and some serious power and speed!
Of course with the 3s you have a bit more punch! 💯
Awesome video.. i just subbed
That's really awesome bro, thank you so much! I really appreciate it
🤜💥🤛
You said under 60, how much would everything cost (battery, remote, motor, ESC) I already have the toy
The motor and ESC combo is 55$
Battery won't cost you any more than 20$ and you can get a receiver and transmitter combo for 30 bucks
So around a 100$
@rcfungames thats a good deal :) I'm sure you'd need to upgrade all gears to metal ones, metal driveshafts as well to have reliability
Can I use this on my scx24? 🙏
As far as I've been told no, but I do believe they are going to come out with an adoption for it to fit the scx24
@@rcfungames brilliant 😎😎thanks for replying 🤝🫡
What Jeep is that?? Who makes it?? 🤔
I built this Jeep last year sometime, you can get this body from injora.
Besides the chassis everything else was also purchased from Injora, using trx4m upgrades.
Here is the build video.
ruclips.net/video/BYIKg5NY1mk/видео.htmlsi=8s4aptuxcZBu1fAU
Is it the stock gearing
It is the reduction gears that I am running in the transmission.
The motors got such a high KV that it's got tons of wheel speed.
I will probably throw under drive in the front and rear axle, to gear it down a little bit more
Thank you so much i love watchin your builds im just geting into crawling@rcfungames
Where is that body from?
You can purchase this directly off the injora site.
Injora.com
I can’t get this thing to work with my original transmission
That's weird it should be a direct fit to the original transmission.
You did fit the little mount?
@@rcfungames yes I did, I purchased three to put on different vehicles and only one worked right. I’m sending them back and trying again. The one I did get working is working great.
ESC is "not" waterproof! Maybe the motor fit also other Micro Crawler (adapted) like CR 18P FCX 24 ?
No the electronic unit is not waterproof, but apparently the OutRunner motor is.
I believe they will be coming out with the adoptions you will need for it to fit the scx24 and other micro Crawlers.
I know that this system is compatible with other 32 a.m. systems.
Like I have mentioned on my channel in other videos I am not very familiar with brushless setups.
I'm hoping over the next year or two I will do a lot more installations and testing with brushless systems.