Replace 2006 Toyota Matrix Rear Door Handle | The Fixit Shed
HTML-код
- Опубликовано: 8 июл 2024
- Apparently, Toyota Matrix door handles get brittle after sitting in the sun for a few years. Both, front and rear, passenger side door handles have broken. the front was an easy repair. There is an access hole, so just remove the hole cover, and loosen the screw that holds the handle on. On the rear you have to remove the inside panel, and lower the door latch mechanism to access the screw that holds the door handle on. This is a bit more complicated, so I thought it would be an interesting video.
This is the best video of them all. I've had a broken handle for 2 years because all the other videos looked way to complicated. Today I found your video and less than 20 minutes I had it done. You are the best.
Thank you for the kind comment. Glad it helped!
I agree. It is an excellent how to.
Dude what a lifesaver! I tried and failed this repair 2 years ago, and finally got up the courage to have another go - and found this video, and succeeded this time! Thanks, finally I’m not the loser with the missing door handle on my block 🙂
Congratulations on your success! I am glad the video helped.
This made everything so much easier. Swapped my broken handle in 20 mins!
Glad it helped!
This was the best one for the rear door handle due to the part with the fingers inside going on to the little metal part. Thank you!!! A huge time and money saver and I didn't break anything thanks to this video. Very nicely done!!
Glad it helped!
What an excellent video! I am about to install two rear door handles to my friend's 2006 Toyota Matrix and without your video, I'm sure I would have been befuddled.
Thanks for helping so many people out with your knowledge and video production skills.
Thanks! Glad it helped!
Thanks for the video. I fixed my 2007 Toyota Matrix handle in 20 minutes!
Glad it helped
thank you so much for this awesome video, replaced the handle in 20 minutes, followed you step by step
Glad it helped!
Suggest you remove the silver 10mm bolt that secures the window track, located below the door latch and move the guide inboard. This will make it easier to remove the door latching mechanism. Also. when you are trying to place the red fork over the silver lever, wear a glove. Makes it easier to push down that lever and slide the red fork into place.
And you get a "Thumbs Up" for such a good vidio!
Huge thanks for the guide, It helped me figure out how to put on the handle without too much of a fuss.
Thanks, I am glad the vieo was helpful.
Used your method just today! Was able to repair the door handle in about 20 minutes! Thanks for the video.
Nice work! Glad the video helped!
Thanks for the video. It was perfect. My bolts were T30's not T27's. That was the only difference. 2006 Toyota Matrix
Thanks!
Sir you are the best ,clear great inside door videos and no nonsense. Much thanks.
Thank you! I am glad you liked it.
Excellent tutorial! Even I was able to replace the door handle relatively easy. Thanks.
Glad it helped!
Thanks for this video, it is the best one of the several that I watched. It looks like I will be able to get the inside door panel off with the door closed as the inside latch wont work and the outside is broken. I think that when the handle got hit and shattered the inside latch was moved. Thanks again, Brian
Thanks! I am glad you liked the video. I hope you get it working
i ordered the hex for the doors first i fixed the front that was super easy , then waited for it to cool down in temp from the outside heat and gave it a try on the back door expected it to be much harder it was since i had to remove the door panel and the fork lock seemed to be the hardest but thanks for your video all good
Nice work! Glad the video helped
Worked great, thanks for the help!
Glad it helped!
Good thorough video, thanks!
Glad it helped!
Man that was easy thanks to your video. Thanks Bro
I am glad the video helped!
Excellent video, saved me a bunch of money, thank you! (Fortunately, I had a Torx 27 too!)
Thanks! Glad you liked it!
Thanks! This is exactly what I needed
Glad I could help!
Thanks. Gotta replace LR handle on my 2006 Matrix. This is actually the first piece of plastic to ever break on this car with almost 208k miles. Also, I occasionally spray some silicone lube into handle mechanisms to keep them operating smoothly.
That is awesome! Sounds like your Matrix held up well. Thanks for the tip!
Thanks for the video, I'm going to be doing this in just a little bit. Unfortunate that it is a bit more complicated than the front door, but I'll get it.
It is more complicated but definitely manageable. good luck!
Great video!
Thanks! I am glad you liked it!
Thank you so much you helped me do it myself
Glad I could help! Congrats on your success!
Thanks, very helpful!
Glad you liked it !
I did this about 4 years ago. Broke again. Had to come back for a refresher course.
I do that all the time
the tork bolt remover is not q 27 its the 30 just did the front door on sunday and will doing back door next week , but thanks for video it will surely help out .
Thanks!
Thank you so much for the SUPER! Glad you liked the video.
I hope Ibe available to replace it myself 😢. Looks good to me and easy but , I’m terrible with screwdriver. Thank you
Good luck! Let me know how it goes.
thanks for the video. I hope we can pull it off because the dealership wanted to charge me $325 in labor to do it. OUCH
OMG! That is insane. You got this.
thanks. It worked!!
That's awesome!
Good afternoon, I have a problem with a door for a Toyota Matrix 2008. I wanted to change the handle of the rear door for reasons of time. I didn't have time to change it. Disassemble everything and put everything back, but I forgot to put the red safety rail and put it aside by mistake. activate the child lock of the door now the door does not open from the inside or from the outside how can I open it?
Ouch. I don't have mine here to look at for reference (my son has it at school), but you have to get the door panel off. It is not going to be easy with the door closed. Or if there is a way you can slide something in the door jamb to switch off the child lock. Thats not going to be easy, either.
This is an absolute nightmare!
did you get it straightened out?
Hey man! Your video helped me out a ton but during the process I accidentally broke the red fork that helps the door open from the outside. How is that piece called? Can I replace it easily? Thanks a lot
Glad the video helped. Sorry you ran into a problem. I am not sure of the technical name for the part, and without ripping the door apart, I am not sure what would be invilved in replacing it.
@@TheFixitShed thanks anyways. I will head to junkyard and see if they have that red fork
Video is incomplete. When putting in the new handle, it must catch the latch to be operable. This doesn’t always happen. I had to reach in and pull the latch down to hook up to the handle.
4:55
I closed the door while it wasn’t latched properly. Now the door is stuck closed. Is there any way to bypass that and get the door open?
You should still be able to open it with the inside handle. The inside handle goes directly to the latch. It doesn't use the red fork that the outside handle does.
I replace the rear handle and trying to open the door from outside does not work, what I am doing wrong.
You may not have lined up the latch with the fork when you reinstalled the latch. I would start there. Reach in and just pull the lever down and when it comes back up it should catch the fork.
@@TheFixitShed I have no problem with that. When I inser the handle it moves freely and does not activate the opening of the lock. Am I missing a step?
Watch the video at the 5:00 mark. Is that white/silver lever inside the red fork on yours? If it isn't, the handle will still move freely and not open the latch. If it is not inside the fork, just manually move the white/silver lever down and when it comes back up it should be in the fork. If it is in the fork, close the door and move the lever down manually and see in the door latch releases. if it does not, there is a problem with the latch. If the latch releases, there is a problem with the engagement between the handle/fork/lever.
What if the exterior door latch doesn't open the door
You may not have the silver tab in the red fork inside the door. There is a spot in the video where I show the inside, and you can see the two parts that need to go together
1:57 What? The red wire suddenly disappears?
Magic. IIRC, the camer cut off while I was in the middle of that take. When I reset everything to reshoot it, I forgot to reconnect the wires, so when I went to edit the video, I didn't have anything thing that showed me disconnecting the wires, but it seemed pretty simple and obvious, so I did not do it all over again.
You didn't tell us about >repairing< the plastic curtain that you cut.
Packing tape works well.
I must have the wrong door handles because mine won’t go in… did it say on the little bags the part number?
I really don’t get it. In your video you first put the front part of the door handle in then the rear part. If I do that, the rear part won’t reach.
I no longer have the bag that the handle came in, but when I look up the listing, the rear door handle I ordered for my 2006 Toyota Matrix says 69211-02130
When removing the latch your wires "magically" disappear. Why skip the part showing how to safely remove them? Smh
Because the camera didn't record it. I figured it was a simple and straight forward enough task that people would be able to figure it out, so I didn't take the door apart to reshoot it. Maybe I was wrong.
Thank you for teaching me this
My pleasure 😊