Toyota Camry outer rear door handle replacement

Поделиться
HTML-код
  • Опубликовано: 20 авг 2016
  • A "how to" on replacing the rear door handle on the legendary 2002-2006 Toyota Camry. Tips and tricks on what to watch out for and what not to do.
  • Авто/МотоАвто/Мото

Комментарии • 27

  • @bodotdot
    @bodotdot 7 лет назад +3

    Worked like a charm. Thank you!

  • @RajeshKumarRamachandran
    @RajeshKumarRamachandran 7 лет назад +1

    thank you very much for this video. i was able to fix my broken handle.

  • @stuiegibson8945
    @stuiegibson8945 4 года назад +1

    Thank you sir.
    The most helpful video out there.

  • @leefrandsen6290
    @leefrandsen6290 7 лет назад +1

    thanks mate, exactly the same issue and had me sorted!

  • @traviskitchens9790
    @traviskitchens9790 Год назад +1

    Thanks for the video. It made the fix so much simpler

    • @ChromeFlakes
      @ChromeFlakes  Год назад

      No worries, not much goes wrong with a Camry, glad it can be a cheap fix.

  • @graemeroberts2935
    @graemeroberts2935 6 лет назад +1

    Brilliantly done! Thank you. Hurrah for Australians!

  • @bondboost314
    @bondboost314 4 месяца назад +1

    7.14 mins put a 10mm nut on outside right side to hold in place, while pulling down on yellow piece inside door all the way down, push new handle in, It should go straight in. Slide to the left. Remove 10mm nut

  • @cobar5342
    @cobar5342 2 месяца назад

    Very good video, thank you

  • @eriksvensson5502
    @eriksvensson5502 3 года назад +1

    Thanks bro helped a lot

  • @static_Tricolor_camry
    @static_Tricolor_camry 7 лет назад

    I'm replacing my oem outer door handles with real chrome door handles on an 07 Camry although the door panels are much different to remove the handles are somewhat almost the same so the only confusing part is removing that lock where the 3 screws are next to the child safety lock switch tomorrow I will do this hopefully I don't waste my time I don't have all the tools but I got the Hex screwdriver ratchet just basic tools today I was replacing my Front right passenger door Handel and the screw won't go back in the hole that connects to that small little thing next to the door handle I may need to replace the screw

  • @marlonmiamarlonmia9552
    @marlonmiamarlonmia9552 3 года назад +1

    Bud u saved me some cash yeeeha great vid mate keep up the awsm vids cheers

  • @rodnassar6020
    @rodnassar6020 2 года назад +1

    Thank you so much!

  • @criticalthinker7822
    @criticalthinker7822 4 года назад +1

    Bro thank you x 1000

  • @JustAQ92
    @JustAQ92 5 лет назад +1

    Thanks ❤️🌷

  • @RobertGerami
    @RobertGerami 3 года назад

    One minor change with the 2004 v6, but worked great. Thanks

  • @kellytress5091
    @kellytress5091 7 лет назад

    thank you for this video! my husband and i replaced my rear driver door handle but we never set the piece into the yellow holder. now my rear door won't open at all. any idea what we can do to fix this problem?

    • @yeehaa1342
      @yeehaa1342 7 лет назад

      Hi Kelly, from what you've said the only solution is to remove the door card, undo those three, star screws around the door latch and just make sure the "nail head" slots into the yellow "peg". Good luck!

  • @TimTimothydB
    @TimTimothydB 6 лет назад

    Any ideas what the yellow pegs official part name is?

  • @Lenaaard
    @Lenaaard 5 лет назад

    I have a different mechanism because of the key fob i think and it won't come out

  • @juangarcia4249
    @juangarcia4249 2 года назад

    Thanks

  • @bad001bd
    @bad001bd 6 лет назад

    Have you done this to the front doors?

    • @yeehaa1342
      @yeehaa1342 6 лет назад

      BAD Ben sorry mate, I haven’t done the front doors. I’d think they’d be very similar though.

  • @BOB-xy2bx
    @BOB-xy2bx 5 лет назад

    ممتازه

  • @WadeWoodring
    @WadeWoodring 4 года назад

    The spring is what fell into my door. Well shit.