WhamBam a REAL STICKY INSTALL, Pass or Fail? Find out HERE! How to Mod for multibed installation.
HTML-код
- Опубликовано: 9 сен 2024
- From start to finish we show you how to install the WhamBam Build Bed System. I will walk you through the process step by step DIY style. Learn tricks and even a Mod to use your existing build bed for faster part swapping. I will go over what comes in your kit. Care and maintenance of your flex spring steel magnetic build bed system and of course my ending thoughts.
Does it Stick or not My final thoughts on the WhamBam are a must see. @ the end of the video.
This install is for the CR10S Pro Creality 3D printer however the install will be universal for most printers. It's easy and fun to install your self and best of all... Well, watch the video to the end for details.
Shout out in this episode goes out to WhamBam Build Bed Systems,
Share this video and add @whambamsystems to your reposting. Let them know you saw this video tell them "LD3D" sent you.
whambam3d.com/
WamBam has created the specially formulated Wham Bam PEX Polymer Build Surface which surpasses PEI in temperature resistance, performance, and material ‘stickability”. It sticks so well you would have a heck of a time getting the print off the bed without our Wham Bam Flexi Build Plate. Simply remove the Wham Bam Flexi Build Plate from the Wham Bam Flexi Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off!
Available in 6 sizes, the Wham Bam Flexible Build System includes everything needed to install on your printer:
1 PEX Build Surface
1 Flexi Plate
1 Magnetic Base
4 Aluminum Shims
The Flexible Build System is a magnetic build plate for 3D printers that allows your prints to easily stick to the build plate and be removed with a simple flex of our spring steel plate.
Wham Bam Systems is dedicated to improving the 3D printing experience through innovation. Our first product line, the Wham Bam Flexible Build System, addresses the need for printers to have a more reliable build surface which is easy to install and makes printing and removing a breeze!
Wham Bam was created when Peter Solomon, a long time inventor, award-winning designer, maker, and 3D printing addict realized that many of his personal modifications to his printers would be very useful to all 3D printers.
Peter has been contributing to the community for years by posting his models to thingiverse, his how-to videos on youtube, and his advice to many forums. He became obsessed with resolving first layer adhesion as this is one of the issues that affect every 3d printer and then needed to find a way to get prints off the bed easier. When he made his first prototype and shared on social media nearly everyone wanted one, and BAM - Wham Bam was born.
Wham Bam will continue to make high quality, economic 3D printer products following the same mission: Making 3D printing Easy, Productive and Fun!
Remember to subscribe to keep the videos coming!
/ @liquidirt3d
Want to help our channel, it's easy Buy us a cup of coffee, Keep us going and we will keep making videos for you! Click the link below its that easy.
www.paypal.com...
Find out more on our other links:
Instagram: / liquidirt3d
Email: 3dprinting@liquidirt.com
Are you a manufacturer? Want a product reviewed? We will review your product with an honest set of testing in real-world applications and a set of standards that any Maker will find useful. Please email us for more details: 3dprinting@liqui-dirt.com
Company's we trust and recommend!
TinyMachines 3D: tiny-machines-... (LD3D)
MakerBox: www.makerbox.m...
MatterHackers: www.matterhack...
Proto-Pasta: www.proto-past...
FilamentOne: www.filamenton...
As a final note if you enjoy what you have seen this far please subscribe it helps keep us bringing videos to you. Don't forget to click on the bell to have notifications of new videos being posted.
/ @liquidirt3d
Liqui-Dirt 3D (LD3D) is a project of Liqui-Dirt LLC. A natural and Organic company dedicated to Plant health. www.liquidirt....
All information in our videos is from our interpretation and or feelings and based on our own experiences and your results may vary. We take no responsibility what so ever in any way of your use of these information products or services. This is a channel based on fun and bringing you an overview of items we find exciting and showing DIY tricks and Mods.
great video, thanks! BTW Wham Bam typically recommends that users mount the magnet directly to the Heated Bed and removing the extra glass or aluminum bed to reduce time to heat up. This is as long as your heated bed is pretty flat and stiff. If you do mount to bed, then remove the clamps and you are good to go!
Typically the CR10 S Pro we recommend the 310 x 320 kit to fit full heated bed, but if you are going to use with the clamps as shown the 310x310 would be fine for you.
@@WhamBamSystems This is good advice and the sizes are great to know thank you.
It lasts a long time! Wham Bam recommends you scuff the steel wool between prints. I’m pretty sure. You’ll see the PEX will start to loose a little bite. Usually means it needs to be cleaned, and scuffed.
Yes, I think you are right and I have been just cleaning with Alcohol between my prints with no scuffing between and it is printing really smoothe. So far no issues, constantly rubbing steel wool on the PEX could wear it out faster. So I'll just use a paper towel and Alcohol until I have a sticking problem. Also, I do heat my bed to 70C for the first 10 layers then drop it down to 50C for the rest of the print.
Good Job Man! The PEX surface is really good for PLA and PETG.
BTW, you can use multiple Flexi Plates and put any build surfaces on them so you have the interchangeability. And the PEX works amazingly with PETG, it won't stick if used according to our advise.
This is good to know thank you and can you explain here how and the best way to Print PETG on the PEX?
Absolutely, thanks.
PETG has a similar component composition to PEI and PEX and therefore it likes to stick to them too well. We developed PEX with a higher melt point than PEI to outperform it on high temp materials.
You should have no issues printing PETG,
for safe removal we recommend that you allow part, not just Flexi Plate, to cool completely, and flex the Flexi Plate to pop it off, never pry with force or pull.
Also set gap not so tight, very little first layer squish is needed.
Bed temp 70C and hot end of 240-250 is ideal
It shouldn't take a month for delivery! there was a batch of shipments with DHL which was routed all across the world before getting to the customers, we are sorry for this! It usually takes just a few days in shipping with DHL.
This is understandable with the shipping I can only speak to the timing I had to wait for my delivery and I'm sure you have sorted out the issue and can get the product to customers faster then it came to me.
Wham Bam Systems Hej från Sweden love the fact you respond to ur customers:) how long shipping to Sweden
You could have removed the front clips, right? That way, you save the integrity of both pieces
I think it’s a issue your facing bcuz a lot if ppl I’ve seen do it not your wY but . It’s good you did it this way bcuz I got a friend with CR10 Max and might do it your way to b able to use different beds
Why did you keep the old plate clips installed? They should be removed when using WhamBam.
Because I am using several different build beds so I have to be able to switch them out so if the Whambam was permanently attached to the heated bed then I could not print some of the material I need to that will permanently stick to the PEX thus I require the ability to remove the build plate to swap it from time to time.