Glad it was helpful. Don’t forget to check out the latest customizer video which reviews and tests the newest customizer, which will be the model you have.
where would you recommend looking for a single bit replacement (multiple of those) it's one of the high quality diamond bits in the additional drill kit. I believe it's a 3/32’ (1.3mm) diamond ball tip - I am guesstimating that size as it's the same size on the Lee Valley engraving pen. Thanks in advance
Yeah just so you know I can't find the bit size adapter on their website anymore even with that link. I really hope they still have it. I am asking the company right now but it would be great if you could reach out to him since you already have a relationship. I'd like to get that thing ordered as quickly as possible so that I can use this with some of my other bits
@@UncleFrogfacehow do I message you? On here? Yeah I need to order something quicker I already have their engraver but anything that will work I'm trying to figure out exactly what type of adapter I need to get. I know they use an Allen key to lock the bits into place so I just need to know what that's called maybe I can find one but if you have something that'll work that will completely make my day I don't know if you meant message you here or somewhere else I don't know where to go.
@@UncleFrogface I make stones using cement, from silicone molds, so knowing the bits will truly carve into them is very helpful info! I also use many of the bits for sanding & carving air dry clay projects & look forward to using them on polymer clay projects!
Great video Sean, very informative. I may have to give it go in the future. It looks like a great little tool. Looking forward to seeing other things you create with it.
I have owned one for two years but never have been able to use it because l cannot tighten the collet that holds the bits. I even sent for a new allen wrench… but it doesn’t turn anything.? I am so frustrated!
@@bonnietweedyshaw1665 you actually don’t need the collet. It has a pressure fit system. The collet is for extra safety. But if you’ve had yours for 2 years it may predate that. Are you on instagram?
The Alan screw on my battery-powered $15 engraver got stripped within 10 months bc I used the engraver so much. Last thing I expected to go out. Is this something I should worry about with this engraver?
What bit would you use for egg shells?? I decorate all sorts of stuff, but I'm asked about eggs, every blue moon, but NEVER EVER tried engraving one. I'd love to give it a go!! Would you recommend this for a total novice like me?
I think it would be great for any skill level. I’ve seen it used on egg shells (and it’s on my list to try). I would say any of the diamond bits with work. The carbide tips would be too harsh. Lowest power setting and take it gently.
So my engraver came with a but already installed...it's stuck. I have tried everything and cannot get it out to save my life! Might you have any suggestions?
Thank you for showing the use of this tool. Yes, this hobby is very dusty. One should use a Dust mask. I worked in a company where dust was generated from engraving. The worker initially worked without a mask until she collapsed and fell off her chair. After that, she always wore the mask to work.
QUESTION Hi! I am completely new to all this, and I don't know if you can answer this question. Is there a massive difference between this Culiau pen compared to all the other "identical" pens on amazon that costs less than half the price of the Culiau pen? And don't just say, "It is more expensive, so it must be better", because as we know today many companies takes extra money just because of the label of their company etc. Hehe!
I can absolutely answer that question. Culiau hold several patents for the customizer which aren’t part of the cheaper pens. The parts, battery life and torque of the pen are all far superior to the cheaper knock off brands. Essentially, this is like the difference between a posca paint marker and a generic dollar store paint marker. They might look the same, but the experience is vastly different. Also, Culoau is a growing brand in the craft sector who actually care about the customer experience. There customer services have always been great and they will happily answer any questions people have. I hope that helps. 😉
I'm a crafter & buy metal cutting dies. The pieces are joined & when cut apart can leave sharp, small, burrs. Do you think I could use this tool to cut the die pieces apart & smooth off the burrs ... if so which attachment/s would you suggest please?
Whilst it not a cutting tool, there are cutting attachments on their website. However, the adaptor is a good call as you can then also use standard dremel bits. For the deburring though, yes I think this would work. One of the 30 included bits is bound to be what you need. I use the flat bar to deburr 3d prints.
I was wondering if it carves different eggshells well. The picture on the website is not high quality engraving of an eggshell. It’s just some holes in a chicken egg. Can you show something more decorative on an egg that is harder than a chicken egg. For example, goose, rhea, emu or ostrich eggs would be ideal. If you need pieces of these eggshells for demonstration, let me know and I can send you some scraps of each. Thank you.
I am certain it would. It would need to be a slow, patient process because eggshells are so fragile, but it's really an amazing, little tool. As with any other material, keep the bit & shell cool. If you feel the Culiau heating, give it a break. Don't charge a hot tool. 😉☺️
I have seen some beautiful letting with it. Calligraphy isn’t my thing (although it’s been requested I try) but the nibs are suitable for a whole host of mark making.
You said there's an attachment that allows you to attach other pieces to it, did it come with the kit or is it bought separately? I looked on their website a bit and couldn't find anything
5.47pm I'm wanting to cut delicate lines in eggshell, and understand a disk is going to be better than a bit. Is that correct, and wh2at disks do you have I don't think I saw any
Hello! I was going to purchase the engraver with the 15% code, but the Culiau store is only giving 10% on this code. Should I contact them? or have they downgraded the discount?
I installed the thinnest bit and used it for deepening the engraving of two projects I am working on with speedy success. But, now I have no success of changing the bit or removing it from the pen 🖊️ part.
I have a Micro Polishing pen And I want to engrave on drinking glass what is the best grinding tool to use please or can I use any of the tools the box of tools I have look liuke yours
The main one I was really hoping to see was carving into metal. You mentioned it at the beginning but never actually did it. Is that a no? I’m curious about pewter or aluminum.
'Aluminium sharpener?'. Any tool will mar pewter as it is one of softer metals. Any burr in any rotating tool will engrave or mark pewter. All you will need is mastery in controlling the 'pen' as if an ordinary writing tool..However you will find it highly challenging to use it in the sense of good looking calligraphy quality work so much exercise needed before venturing into pewter engraving.
All of the engraving bits can be used on glass they each give a different line thickness and type. So have an experiment with them and see what works best for you. I’m a fan of the ball ended ones personally.
I can’t see anything on the box, but I’m sure it would be on the website somewhere. Failing that you could contact them directly on instagram and ask Martina
Link for the bit size adapter
culiau.com/products/0-3-6-5mm-quick-change-hexagonal-handle-three-jaw-custom?_pos=5&_sid=a90c8c57c&_ss=r
Hi. I just went to look for the adapter from the link you gave. It says page not found. Wondering if it is sold out? TY!
@@drumw41 try just googling their site. They’ve probably changed something.
TY will do! It's true name is hexagonal adapter?
@@drumw41 I think so. It may be out of stock.
🙏 Thank you. This was helpful. I’ve been stepping around the customiser since Christmas not quite knowing where to begin.
Glad it was helpful. Don’t forget to check out the latest customizer video which reviews and tests the newest customizer, which will be the model you have.
where would you recommend looking for a single bit replacement (multiple of those) it's one of the high quality diamond bits in the additional drill kit. I believe it's a 3/32’ (1.3mm) diamond ball tip - I am guesstimating that size as it's the same size on the Lee Valley engraving pen. Thanks in advance
I’m not sure. I get all of my bits from culiau. I’m sure if you messaged them on instagram they would be able to help.
I actually found some on Etsy but the shipping costs were very high@@UncleFrogface
Yeah just so you know I can't find the bit size adapter on their website anymore even with that link. I really hope they still have it. I am asking the company right now but it would be great if you could reach out to him since you already have a relationship. I'd like to get that thing ordered as quickly as possible so that I can use this with some of my other bits
If they can’t help you, message me, because I think I may have an alternative.
@@UncleFrogfacehow do I message you? On here? Yeah I need to order something quicker I already have their engraver but anything that will work I'm trying to figure out exactly what type of adapter I need to get. I know they use an Allen key to lock the bits into place so I just need to know what that's called maybe I can find one but if you have something that'll work that will completely make my day I don't know if you meant message you here or somewhere else I don't know where to go.
@@UncleFrogfaceI just sent you a message on insta. I'm not tech savvy so I didn't know where to send you a message lol
Fantastic video Sean! 😀 TY for discount code. I'm liking the adapter option.
Same. I may have to get an adapter for myself.
@@UncleFrogface I make stones using cement, from silicone molds, so knowing the bits will truly carve into them is very helpful info! I also use many of the bits for sanding & carving air dry clay projects & look forward to using them on polymer clay projects!
Great video Sean, very informative. I may have to give it go in the future. It looks like a great little tool. Looking forward to seeing other things you create with it.
Thanks Troy. I do highly recommend it. There are lots of accessories too which is also great.
Very useful demo thank you 👍👏
No problem. Make sure to check out the new version 3 review. Link is in this videos description
I have owned one for two years but never have been able to use it because l cannot tighten the collet that holds the bits. I even sent for a new allen wrench… but it doesn’t turn anything.? I am so frustrated!
@@bonnietweedyshaw1665 you actually don’t need the collet. It has a pressure fit system. The collet is for extra safety. But if you’ve had yours for 2 years it may predate that. Are you on instagram?
The Alan screw on my battery-powered $15 engraver got stripped within 10 months bc I used the engraver so much. Last thing I expected to go out. Is this something I should worry about with this engraver?
@@themeekwarrior do you mean the grub nut that holds the bit in place?
What bit would you use for egg shells??
I decorate all sorts of stuff, but I'm asked about eggs, every blue moon, but NEVER EVER tried engraving one.
I'd love to give it a go!!
Would you recommend this for a total novice like me?
I think it would be great for any skill level. I’ve seen it used on egg shells (and it’s on my list to try). I would say any of the diamond bits with work. The carbide tips would be too harsh. Lowest power setting and take it gently.
Hi did you try the piece of metal ? Can’t see on video
Thanks
Yes. And it works well on metal
So my engraver came with a but already installed...it's stuck. I have tried everything and cannot get it out to save my life! Might you have any suggestions?
Grip it with some pliers and if still stuck contact culiau.
Thank you for showing the use of this tool.
Yes, this hobby is very dusty.
One should use a
Dust mask.
I worked in a company where dust was generated from engraving. The worker initially worked without a mask until she collapsed and fell off her chair. After that, she always wore the mask to work.
I agree. I have a woodwork shop in my garage and have a heavy duty dust and particulates mask. It’s great.
You didn't show it on metal...?????
There are other reviews for this where I have.
Do you think you'll do a review of their mini-saws as well? I've noticed nobody has.
Good question. I will ask them.
Question: How do you know it's fully charged. I just got it in the mail and plugged it in. The middle light in the three green bars is lit. 🤔
It comes fully charged. When you plug it in, if it needs to charge then the lights will flash. 3 non flashing lights mean full charge.
What is the life of re-charged battery ? Is it possible to get replace battery in case it dries out. Thanks
The battery can’t be replaced, but I’m not sure on the life. You’d have to contact culiau I’m afraid.
I want to try this but I can't even draw beautifully with pen and paper. Does their guide do a good job at teaching beginners?
What is price and where it can buy this engraving pen?
You can find it on the Culiau website. Links are in the video description.
QUESTION
Hi! I am completely new to all this, and I don't know if you can answer this question.
Is there a massive difference between this Culiau pen compared to all the other "identical" pens on amazon that costs less than half the price of the Culiau pen?
And don't just say, "It is more expensive, so it must be better", because as we know today many companies takes extra money just because of the label of their company etc. Hehe!
I can absolutely answer that question. Culiau hold several patents for the customizer which aren’t part of the cheaper pens. The parts, battery life and torque of the pen are all far superior to the cheaper knock off brands. Essentially, this is like the difference between a posca paint marker and a generic dollar store paint marker. They might look the same, but the experience is vastly different.
Also, Culoau is a growing brand in the craft sector who actually care about the customer experience. There customer services have always been great and they will happily answer any questions people have.
I hope that helps. 😉
@@UncleFrogface Thank you so very much for the info. And I am so glad you took your time to give a great answer.
Wish you the very best day.
@@NiclasLinden you’re welcome.
Bit stuck. How to get it out bit
I'm a crafter & buy metal cutting dies. The pieces are joined & when cut apart can leave sharp, small, burrs.
Do you think I could use this tool to cut the die pieces apart & smooth off the burrs ... if so which attachment/s would you suggest please?
Whilst it not a cutting tool, there are cutting attachments on their website. However, the adaptor is a good call as you can then also use standard dremel bits. For the deburring though, yes I think this would work. One of the 30 included bits is bound to be what you need. I use the flat bar to deburr 3d prints.
Thank you 👍
Hello . Does it work on a gourd and if it does which bit would you use for punching little holes in it?
That is a good question. I haven’t tried but I don’t see why not. I would be careful with moisture on a fresh gourd.
I was wondering if it carves different eggshells well. The picture on the website is not high quality engraving of an eggshell. It’s just some holes in a chicken egg. Can you show something more decorative on an egg that is harder than a chicken egg. For example, goose, rhea, emu or ostrich eggs would be ideal. If you need pieces of these eggshells for demonstration, let me know and I can send you some scraps of each. Thank you.
A very interesting question and one I haven’t tried. Dm me on instagram and we can talk.
I am certain it would. It would need to be a slow, patient process because eggshells are so fragile, but it's really an amazing, little tool. As with any other material, keep the bit & shell cool. If you feel the Culiau heating, give it a break. Don't charge a hot tool. 😉☺️
@@susanjdicharia4353 absolutely on all counts.
Can you use it for calligraphy?
I have seen some beautiful letting with it. Calligraphy isn’t my thing (although it’s been requested I try) but the nibs are suitable for a whole host of mark making.
Is it a brush motor or brushless. I understand brush motors have more vibration so more hand fatigue.
@@juliehitch8561 I’m not sure, but I’m sure someone at culiau could answer that. They’re very good at responding via social media.
Will this work well on oak and hardwoods?
I haven’t personally tried on really hard wood yet, but it works on metal and stone, so I don’t foresee an issue.
How much is it
Really wanted to see it used on metal
Check this latest video. ruclips.net/video/4NkVp0Ystvw/видео.html
You said there's an attachment that allows you to attach other pieces to it, did it come with the kit or is it bought separately? I looked on their website a bit and couldn't find anything
It’s bought separately. I’m going to pin a post with the link for it.
@@UncleFrogface Thank you!
5.47pm I'm wanting to cut delicate lines in eggshell, and understand a disk is going to be better than a bit. Is that correct, and wh2at disks do you have I don't think I saw any
There aren’t any disks in the set of 30 tips. Culiau sell additional bits on their website.
Hello! I was going to purchase the engraver with the 15% code, but the Culiau store is only giving 10% on this code. Should I contact them? or have they downgraded the discount?
Yes contact them, or use the referral code on my linktree
@@UncleFrogface Thank you! I love your vids!
@@littlemoonmaker1220 thank you very much 😊
How long does it take to get the tool? I ordered and never got it. I feel like I have been ripped off.
It took a couple of weeks to get to me in the UK. Have you contacted them? They’re usually pretty good at replying and sorting out shipping issues.
Mine stopped spinning while on the charger but the numbers still come up
Contact Culiau customer support and I’m sure they will be able to help.
How do you take it apart?
What do you mean by take it apart?
I installed the thinnest bit and used it for deepening the engraving of two projects I am working on with speedy success. But, now I have no success of changing the bit or removing it from the pen 🖊️ part.
It should just pull out when you release the side grub screw. Contact Culiau
Yeah Same happend to me. They sent me a new Device... But this shouldnt be Happening... The Screw should be better in it... otherwise cool Tool.
I have a Micro Polishing pen And I want to engrave on drinking glass what is the best grinding tool to use please or can I use any of the tools the box of tools I have look liuke yours
Is it a culiau customizer pen?
The main one I was really hoping to see was carving into metal. You mentioned it at the beginning but never actually did it. Is that a no? I’m curious about pewter or aluminum.
You’re right, I had it there and completely overlooked it. But yes, I did try the aluminium sharpener and it worked just fine.
'Aluminium sharpener?'.
Any tool will mar pewter as it is one of softer metals.
Any burr in any rotating tool will engrave or mark pewter.
All you will need is mastery in controlling the 'pen' as if an ordinary writing tool..However you will find it highly challenging to use it in the sense of good looking calligraphy quality work so much exercise needed before venturing into pewter engraving.
Does it work on resin and cement
Resin, yes. Cement, I’m not sure.
Will any Drexel bit fit in pen engraver?
The bits are smaller than a standard dremel, but there is an adaptor available. The bits are fairly inexpensive though from the culiau website
This pen working in tilce granite and Marble Engraving Brother
Check on the culiau website and take a look at the different bits that are available. I haven’t tried it on those materials so couldn’t tell you.
what is the best bit to use for glass engraving please
All of the engraving bits can be used on glass they each give a different line thickness and type. So have an experiment with them and see what works best for you. I’m a fan of the ball ended ones personally.
@@UncleFrogface thankyou
Can you please tell me on the box does it say in which country the pen is made? I know on their site they are based in Wyoming USA.
I can’t see anything on the box, but I’m sure it would be on the website somewhere. Failing that you could contact them directly on instagram and ask Martina
Didn’t get that case for drill bits you did also didn’t get all those diamond bits and only got one bur not and was over $100
The screen went black
What time? I’ve just scrubbed through and it’s all fine when play it. Anyone else having this issue?
@@UncleFrogface It looked fine to me.
@@madwithhats thank you.
It only went black on my phone. Watched it on my iPad just fine. On my phone it went black just as you got ready to show the pieces and what they do
So......
?
@@UncleFrogface No, nothing wrong, no offence, good video, just said 'so' a lot. I notice things like that, it's my weakness. Keep carving.
metal??? you have not touched metal in video?!
I realised that. It does work and I did use it on metal in the latest video.
@@UncleFrogface ok. please provide me a link.. so pen could works well on still? dont lacks of rotary power when pressed?
@@emilmatesic9095 World exclusive review - Culiau customiser version 3
ruclips.net/video/4NkVp0Ystvw/видео.html