This man is a legend, “a simplistic picture” he says and then proceeds to make a masterpiece! Thank you my man! And your review of it was perfect for me to make my mind if I should get it or not, so thank you for that as well🤙
As an amateur dude who just likes to draw pretty pictures on different things this actually helped quite a lot and you're funny as hell too. Cheers man!
No mention of how long it lasts compared to compared to how much time charging. I remember watching a review about this and think they said at least 2 hours between uses and 20 minuit use time . If that helps
Yeah bought it for glass because it promised that in the advert and it doesn't work at all. Leaves nasty marks only. Very disappointing even though it looks like it works fine on different materials.
Glass engraving takes some decent practice, given you’re working a slick surface. You need to be work slowly and deliberately, especially as a beginner. Also might be the particular bit you’re using. I’d experiment with different types before throwing in the towel.
I was just trial and error. For me it’s quite like the pyrography, doesn’t make a huge difference which bit you use. It’s more how much pressure and how long you hold it for that makes the difference.
That would depend on the substance. For most material, I personally don’t mind without a mask with the small amounts produced. But you might prefer to use one or have a small fan blowing away.
I bought this engraver but unfortunately using it for fourth time; then stop rotaiting even if it is well charged.Now I can't using it. I'm completely disappointed and I have not choice but accept that I loose my money in a very stupid way.😢😮
This man is a legend, “a simplistic picture” he says and then proceeds to make a masterpiece! Thank you my man! And your review of it was perfect for me to make my mind if I should get it or not, so thank you for that as well🤙
Glad you enjoyed it 👍
As an amateur dude who just likes to draw pretty pictures on different things this actually helped quite a lot and you're funny as hell too. Cheers man!
🙌 coma back for more!
All i can say is wow this man did an excellent job on tgis review he covered everything i wanted to see awesome video man💛
Just saw an ad for this and your video is just what I needed to make an informed decision. Thanks!
You’re welcome 👍
How is it an informed decision? He has an affiliate link. He’s basically a salesman.
@@MadCapMag if I didn’t like the product I wouldn’t put a video out. I’m under no pressure whatsoever to give a glowing review of a tool.
How are we supposed to trust anyone with an affiliate link?? Wish I could find genuine reviewers with no skin in the game.
Yeah... I can't seem to find any review that isn't sponsored by culiau...
It's kind of obvious from the review that the cutting speed is very, very limited.
No mention of how long it lasts compared to compared to how much time charging. I remember watching a review about this and think they said at least 2 hours between uses and 20 minuit use time . If that helps
Just bought 1 n I'm loving it
That’s great 👍
I wanted to know if the Culiau Engraving Pen works well on different materials. This excellent video answered my questions.
I’ve always wanted to try one of those. Looks good.
Thanks for a great review, I've subscribed.
Take care.
Thanks for the review! It was very helpful.
@@episzczek my pleasure
Yeah bought it for glass because it promised that in the advert and it doesn't work at all. Leaves nasty marks only. Very disappointing even though it looks like it works fine on different materials.
Glass engraving takes some decent practice, given you’re working a slick surface. You need to be work slowly and deliberately, especially as a beginner. Also might be the particular bit you’re using. I’d experiment with different types before throwing in the towel.
@@karenvosburg1782 I'm not a beginner. I have had a Dremel tool for years and it works just fine on glass.
Would recomend a dremel instead?
She already has one. :)
@@OhDannyboy7 what? I meant for me. What she would recommend.
Looks like a tool that could be handy for some jobs
How do you know which. Drill bit to use?
I was just trial and error. For me it’s quite like the pyrography, doesn’t make a huge difference which bit you use. It’s more how much pressure and how long you hold it for that makes the difference.
Where is the alan key. I havnt got one in my pack. What size alan key do I need to buy? Thanks
I like your video of what it did on each sample. Can I ask you, did you recharge after wards? A few of us are having a problem with it not recharging.
No I haven’t had that issue. Get in touch with Culiau and let them know 👍
Excellent content! Loved it
Thank you 👍
You convinced me!
How many hours to charge it before I use it?
do you need any precautions not to breath in dust and other particulates ?
thank you ! :)
That would depend on the substance. For most material, I personally don’t mind without a mask with the small amounts produced. But you might prefer to use one or have a small fan blowing away.
Sounds like a dentist’s drill but seems to work beautifully. What’s happened to the uke?!
It’s coming! Running low on time this last few weeks 😞
How long it took to be good?
Not long at all, you learn to control the speed and pressure quickly to get the lines you need 👍
Reccomme4nded it to 2 people there bought it and the battery died within 2 month, You can't replace them
Get in touch with Culiau, that must be covered on a warranty?
@@KingBespokeCreations very limited warranty, a few months only. Buyer beware
Short warranty must equate to low quality tool and short, cheap thrills?
you can now buy it for $20 in some places
@@alierem4266
Garbage, no screw to tighten just cheap
Is figuring out the function of the various tips, trial and error, I mean, experience? There are a lot of tips and often no instructions.
I bought this engraver but unfortunately using it for fourth time; then stop rotaiting even if it is well charged.Now I can't using it. I'm completely disappointed and I have not choice but accept that I loose my money in a very stupid way.😢😮
@@Canario8 get in touch with Culiau and explain to them.
The noise it makes sounds like 🐝 🐝 🐝
Better than chainsaws!
@@KingBespokeCreations yes
I love it. It's my intimate partner during my woodcarving. ❤
Fantastic!
It's like going to the dentist
Maybe don’t try that at home …
Mine hasn't worked properly from the beginning not impressed at all, alot if money spend for garbage in my eyes. I'm buying a dremel
Amigo te culiaron con el precio o es accesible????
@@HEISENVER6A Creo que tiene una buena relación calidad-precio, si te gustan este tipo de obras de arte.
Thanks for that. I will not be wasting my money on one of these.
that in breeding did you in dude
Cena olovke?
@@ivicasivcev2985 kliknite na poveznicu u opisu kako biste saznali trenutnu cijenu. Hvala.
eurgh! sounds just like a dentist drill!:(
😂 do not use on your teeth!
@@KingBespokeCreations omg! NEVER!! 🦷😬😵💫😟😞😫 😂😂😂
@@-abheda it actually says that on the box!
@@KingBespokeCreations 😆😅🤣😂
it sounds lke mosquito 😂😂😂
Best done with some tunes on!
🤮🤮🤮🤮
Did you do a self portrait? 😂