thanks, i have not ever seen a system like this in my 83 years on earth! I learn something every day! I have a 2006 pt , I thought I heard throw out bearing noise ,however maybe not. I will have to check a little closer, thank you for the enlightment!
My 05' PT / GTs slave cylinder is bad. I was really hoping for vin "G" but nope, I have vin "S" which means an internal slave. They need to make the engineers who design this crap to work on their own creations, thanks Chrysler! I guess I'll be on my back in the driveway all weekend, yea.... 😒
i have a question about the clutch for this car. i purchased your clutch kit for my pt cruiser and i don't have any references as to the how many inch pounds or pound feet of torque i need to tighten the pressure plate on to the flywheel. can you help?
Attempted the reverse bleed with my cheap harbor freight reverse bleeder and nothing but a tired hand and a big gooey mess when i pull off the zirc fitting from fluid streaming out, it's like a lonely friday night. What next? Order a better bleeder$, take to mechanic$$$ or get a girlfriend$$$$$$$$$$$$$$$?
I have a 2003 Pt GT but it's automatic. I have a very Loud piston like knocking sound when my car is at a very low idle? The car runs Great and the Automatic tranny works fine. It's absolutely normal with no sounds when driving it. It only makes that "marble in a cup" noise when it is at a very low idle. For instance- when I turn the air on and just before it kicks back up to normal idle. I took it into 2 different shops to see if they can find out where it is coming from they both said it's from the transmission. Sounds like the torque converter/Flex Plate? Maybe a bolt is loose or possibly came out? I am having a hard time visualizing it or where it is? Also if I keep driving it would that bolt wreck anything? Car runs great and the tranny seems to shift normal and has lot's of power and you can't hear it at all until it's at a low idle. Any help would be appreciated! Thanks
Thanks for the response. i later noticed that it was my middle motor mount that its gone. i changed it and my car is back to life. no vibration or noise again. Thanks All
Thanks for the video it helped a lot took me in my garage with father and a friend for muscle 11 hours with breaks... PS. Don't forget lock tight on the flywheel bolts! Good luck guys!
Sir i noticed that the motor 2000 cc with manual trans .. is it from factory made like this ? Or you replaced it from auto trans.. Why i say that because it is the first time i see 2000 cc with manual trans All manual trans use 1600 cc !!
I wish all clutches were like this, makes for a very easy install.
Good explication, tank....
Learned something today! Thank, keep up the awesome work!
Does this video apply to non turbo pt cruisers for the transmission removal?
thanks, i have not ever seen a system like this in my 83 years on earth! I learn something every day! I have a 2006 pt , I thought I heard throw out bearing noise ,however maybe not. I will have to check a little closer, thank you for the enlightment!
My 05' PT / GTs slave cylinder is bad. I was really hoping for vin "G" but nope, I have vin "S" which means an internal slave. They need to make the engineers who design this crap to work on their own creations, thanks Chrysler! I guess I'll be on my back in the driveway all weekend, yea.... 😒
perfectionclutch That sounds horrible! I miss my 72' Skylark, it was pleasurable to work on.
Imagine you take your 05 gt and some other idiot that owned it first removed the reservoir .. a s VIN and g vin should be the same
And the g vin is the same system as this
why are some GTs dual mass and others 1 piece?!
How long does this take, i am having a garage do this. I don't want to be ripped off when it comes to labour.
Hello Great video ! But nothing on how to remove the drive shafts from the gearbox ?
is this easy to do ?
***** thank you !
Is this method the same for the 2.4L turbo srt-4?
Yes pretty much identical
Having the bleed screw at the bottom just proves that auto Engineers are way overpaid for the idiocy that they produce
i have a question about the clutch for this car. i purchased your clutch kit for my pt cruiser and i don't have any references as to the how many inch pounds or pound feet of torque i need to tighten the pressure plate on to the flywheel. can you help?
Did you not watch the video ?
How did the clutch get bleed?
Attempted the reverse bleed with my cheap harbor freight reverse bleeder and nothing but a tired hand and a big gooey mess when i pull off the zirc fitting from fluid streaming out, it's like a lonely friday night.
What next? Order a better bleeder$, take to mechanic$$$ or get a girlfriend$$$$$$$$$$$$$$$?
I have a 2003 Pt GT but it's automatic. I have a very Loud piston like knocking sound when my car is at a very low idle? The car runs Great and the Automatic tranny works fine. It's absolutely normal with no sounds when driving it. It only makes that "marble in a cup" noise when it is at a very low idle. For instance- when I turn the air on and just before it kicks back up to normal idle. I took it into 2 different shops to see if they can find out where it is coming from they both said it's from the transmission. Sounds like the torque converter/Flex Plate? Maybe a bolt is loose or possibly came out? I am having a hard time visualizing it or where it is? Also if I keep driving it would that bolt wreck anything? Car runs great and the tranny seems to shift normal and has lot's of power and you can't hear it at all until it's at a low idle. Any help would be appreciated! Thanks
OK thanks
Quiero saber como cambiar el engrane de adentro de caja estándar de un pt crusier
what fluid do I need to fill ?
Hello All, Please HE carLP!
I do hear a grinding noise whenever i start my PT Cruiser 2001 Model. Can anyone, kindly tel me what's wrong with my car?
Probably just your starter going out.
Thanks for the response. i later noticed that it was my middle motor mount that its gone. i changed it and my car is back to life. no vibration or noise again. Thanks All
Olu Dexter ignition cable
Olu Dexter n
Luk clutch....m. vibrates
I’m interested in the hydraulic hand pump you used. Where can I get one?
I think you did a great job on this video, THANK YOU
So is it a common occurrence for the bushings for the shifting cables to wear out and go missing? Had that issue with my 2002.
Oem Chrysler for clutch and Flywheel and slave cilinder please
Thanks for the video it helped a lot took me in my garage with father and a friend for muscle 11 hours with breaks... PS. Don't forget lock tight on the flywheel bolts! Good luck guys!
So like you skip everything that's important 😉 you don't even show the actual assembly of the system
when you use crow's feet you need to reduce the torque wrench setting slightly
Booger bushings will fix the shift connections
Fantastic well done !!
Well explained mate . Thanks a .
Great video BTW.👍
ocupo una caja de pt crusier 2008 estándar 5 velosidades
BTW matt 65ftlbs
Fantastic video.
master
Que calor
Is it actually possible to leave the passenger side CV in and remove the transmission?
Sir i noticed that the motor 2000 cc with manual trans .. is it from factory made like this ? Or you replaced it from auto trans..
Why i say that because it is the first time i see 2000 cc with manual trans
All manual trans use 1600 cc !!
All pt cruiser in America are 2.4 liters
@@edpenkalski8937 can we use the same manual trans with 1600 cc motor dos it fit ?
@@mrlyricsneo no clue