Just completed my brushless build ended up going with the python and the Cedar motor. Based on your recommendations. Absolutely love this set up. Went with the low transmission gears and a 3S battery. Awesome set up great low speed control Great Top end. Thank you for all your detailed videos. Much appreciated!
Furitek has a beautiful design philosphy and aesthetic. Instantly able to tell if something is made from them and it performs just as good if not better than the already amazing designs.
NO YOU DO NOT NEED A NEW RADIO! I got a traxxas micro TQ reciever and bound it to the control that came with the truck. It works with the furitek komodo brushless speed controller and motor. It would also work with any aftermarket brushless setup. It powers the lights as well. You do need a new speed controller with an aftermarket brushless motor. Works great! It also fits the small space of the stock reciever.
Could you use a traxxas tqi receiver with this esc? I know it doesnt really make sense but i have a few traxxas cars and like to use the same transmitter for all of them
I want to make my trx4m brushless with furitek but I don’t want to be spending a lot of money on a transmitter what good budget transmitters are there for furitek system?
It depends on the reciever. For my brushless furitek komodo I bought a Traxxas TQ micro reciever and bound it to the control that came with the truck. It powers the lights and the new brushless motor. Just remember you have to get a speed controller if you go brushless. It plugs right into the Traxxas TQ micro receiver. This reciever also fits well where the stock reciever went.
I could not find the transmission only option. My bro got me Lizard Pro w/ Komodo and I’m gonna have to buy a motor/trans combo to get the transmission - unless there’s the option to buy a transmission by itself? Thanks
@@bcochener I have a Lizard Pro, Micro Komodo with mount kit. I'm looking to buy the Furitek transmission by itself which doesn't seem to be an option.
They did and then they changed their mind when the entire rc community backlashes against them. To save face they made their demands more clear and told everyone how to advertise parts correctly designed for their products
Just completed my brushless build ended up going with the python and the Cedar motor. Based on your recommendations. Absolutely love this set up. Went with the low transmission gears and a 3S battery. Awesome set up great low speed control Great Top end.
Thank you for all your detailed videos. Much appreciated!
I’m said customer who was excited to see it lol and now a follower
I just went to that hobby shop! Got to try a trx4m on that course and bought one a few days later. Now I’m hooked and looking for upgrades 😂
Awesome video pretty new to this got my trx4m last month high trail and been upgrading it ever since
Furitek has a beautiful design philosphy and aesthetic. Instantly able to tell if something is made from them and it performs just as good if not better than the already amazing designs.
Nice comparison. I was thinking about upgrading to the Cedar. I'll keep the Komodo.
I'll definitely consider doing either one of those upgrades. Thanks!
Have you heard of Dinky RC? Hands down best esc on the market for brushed and Brushless 1/24 (2 ESCs) and 1/10 brushless.
NO YOU DO NOT NEED A NEW RADIO! I got a traxxas micro TQ reciever and bound it to the control that came with the truck. It works with the furitek komodo brushless speed controller and motor. It would also work with any aftermarket brushless setup. It powers the lights as well. You do need a new speed controller with an aftermarket brushless motor. Works great! It also fits the small space of the stock reciever.
Furitek should make a all in one motor/ esc combo like hobbywing has been doing with the quicrun fusion FOC.
It's gotta be a matter of time at this point. Im holding off for a 2in1.
They do
Could you use a traxxas tqi receiver with this esc? I know it doesnt really make sense but i have a few traxxas cars and like to use the same transmitter for all of them
Hey do you have any recommendations in the central CT area for bashing?
I want to make my trx4m brushless with furitek but I don’t want to be spending a lot of money on a transmitter what good budget transmitters are there for furitek system?
Ive been looking at the dumborc x6pm
GT5
Traxxas 6519 receiver + stock remote controller.
2nd the Flysky GT5
Thank you everyone for all the responses I will look into that
If you upgrade this esc, you loose the ability to run your traxxas lights? The ones that are optional that have running lights and 4 ways?
It depends on the reciever. For my brushless furitek komodo I bought a Traxxas TQ micro reciever and bound it to the control that came with the truck. It powers the lights and the new brushless motor. Just remember you have to get a speed controller if you go brushless. It plugs right into the Traxxas TQ micro receiver. This reciever also fits well where the stock reciever went.
Sir do you know if they make a Furitek system for my team associated MT12 monster truck
Where you buy your remote controller?
What wheels do you have
Another informative video!
How much cost this motor with esc and remote control?
Nice indoor course. 👍
When did outrunners become non waterproof? What's different on the Furitek than every other non sensored outrunner that deems it not waterproof?
How did u mount ur esc to the transmission? Double sided tape???
Yup
I could not find the transmission only option. My bro got me Lizard Pro w/ Komodo and I’m gonna have to buy a motor/trans combo to get the transmission - unless there’s the option to buy a transmission by itself? Thanks
You can buy any transmission you want for it. You do need a Komodo motor mount, but that will mate to any transmission.
@@bcochener I have a Lizard Pro, Micro Komodo with mount kit. I'm looking to buy the Furitek transmission by itself which doesn't seem to be an option.
Good info Greg.
Seems like everything being equal the OutRunner motor would always be smoother because of the higher amount of rotating Mass.🤔
What wheels are these?
Anyone know the total price of all these upgrades ?
How about ramming in the 8000kv Godzilla
How much does it cost to go brushless on trx4m
Shouldn’t be as much as a 1/10th
Want a rtr brushless mini crawler
860 🤙🏻
didn't traxxas sending cease and desist orders to companies selling parts for their vehicles?
They did and then they changed their mind when the entire rc community backlashes against them. To save face they made their demands more clear and told everyone how to advertise parts correctly designed for their products
Screw Traxxas there garbage in general
@@michaelinzitari I would have boycotted them too lol, they don’t offer shit for upgrades
Seems like Traxxas has become the Apple of RC.
Lots of tears here. You boys are going to start a flood.
Or you could have picked up a Traxxas receiver and bind them
Umm, so none of those. Why would you think brushless has better throttle control than brushed?
No I’m just here because I was bored and I like a few girls