Это видео недоступно.
Сожалеем об этом.
2012 Dodge Caravan 3.6 VVT engine oil pressure sensor replacement
HTML-код
- Опубликовано: 1 авг 2021
- Dodge caravan code P0520 engine oil pressure sensor/switch circuit and P0522 engine oil pressure sensor/switch low
Nice video. Saves a lot of steps. Thank you! I wish I could give this 100 thumbs ups! This saves so many unnecessary steps. Wonderful video sir!
Good video, but WARNING: may not be as easy as it looks. I bought the sensor socket and took the old one out ok but had a heck of a time getting the new one lined up and in! Maybe I have big hands, but tight quarters! Got it though, so thanks.
Yes
You need to find the right point
Perfect thank you so much keep the good advice up I’ll keep watching
Torque specs for oil pressure sensor is 177 INCH pounds ,,,also torque specs for oil filter cap is 18 FOOT pounds,,, double check with dodge dealer service to verify,, over tightening filter cap can crack plastic oil cooler under the intake and cause leaking
Thanks for this. Got the same code today
Do i need to drain the oil first?
Very good
I have this code on my car right now. Is this really a 3 hr labor job? Should i try changing the oil and filter first? 2015 dodge caravan se
made it so easy
Hi . Thanks for the video. I have a only the code P0520. I changed the oil pressure sensor however the code comes back. The scanner shows the pressure is reading good.
Some times I hear noise in the engine as if is low on oil. The oil level is good. Sometimes there is delin transmission due to this problem . Just wanted to know if you guys have any suggestions.
Thanks for sharing.
If your engine starts making noise when it’s hot probably you have a bad oil pump
Brother the connection of my van is upside down ( meaning the plug), can’t take it out
Theres 2 sensors in that location Which one the upper or lower?? People cant tell what one you took out? The lower one is the oil pressure switch
If ur doing this job and buy the part youl know exactly which one it is they are completely different. But it is the bottom one since u wanna complain lol
What size extension?
I have the new sensor and socket. My issue is I only have 1/2 in rachet. What do I need to get the socket to work with my rachet?
You can buy a 1/2 to 3/4 conversion bit. Or just get a 3/4 ratchet kit too.
I GOT P06DD?
What issues will a bad oil pressure sensor cause. I have the same van and am trying to get it working right again
It can give a P06DD CEL code that will have you chasing your tail around trying to find out what's causing it
@@mickstermouseter7059 I wound up taking it to the dealer they determined it was the oil pump. I didn’t do anything but take it on the highway and run it hard for about an hour. The problem seems to be corrected. The van did sit for a bit and I wonder if there was some sludge or dirt stuck somewhere and I burned it out. It was probably a 4 month stretch the van didn’t do much than drive 5 minutes to the grocery store once or twice a week
Fala Cleber blz? Vem ca sera que o sensor do VW Routan e no mesmo local? Thanks!
Me desculpa mas nunca trabalhei com o VW Routan entao Não sei te dizer isso
@@cleberonegociantedaamerica tranquilidade hugs!!
If there is oil around that plug it means the oil filter unit is leaking and it needs to be replaced and that requires taking off the intake manifold. They are known to leak. Its all one unit The oil filter housing, oil cooler and 2 sensors are all together in one unit😃
Then why didnt my.mechanic change this part as well??? He charged me.$595 to replace the engine oil cooler system but he didnt replace this. Wtf?? And i paid for the part separately so he charged me 595 for labor.
@@erikaledesma6272 Because he may have been lazy or he cheated by doing it this way and charged you the labor of pulling the intake manifold when in fact he didn't. I don't know what the cost is of the complete oil filter filter unit with both sensors but it may have cost you what you paid that mechanic. Hard to say.
@@erikaledesma6272 Here is a video link of what part I am talking about. It shows the whole unit with the 2 sensors. ruclips.net/video/k9p5yuUsKQU/видео.html
This is only if you have a cartridge filter?
How much does this usually cost have a mechanic Who will let me bring in my own Parts he says I need the housing unit the oil filter housing unit and also the intake manifold gasket
Thanks dodge pushing people with special tools for dealership ripoff. And thanks may 6 mechanic nin NYC said no you need remove intake manifold and aşkın $400 lol will buy tool do myself by the way last gm car for me this scam