The Cinebot 30's prop guard frame cracks if you hit something head on. You don't have to be going very fast (medium speed). I've noticed cracks in the frame where the camera cage meets the prop guards, and also, for some reason, just under the antenna mount in the back (also in the plastic, prop guard frame). The cracks are forming where the two camera cage screw holes are. The plastic is very thin there and is prone to easily breaking. If you've bumped into anything, check the frame for cracks. I've ordered a new frame to replace the cracked prop guard, but if the next frame cracks as fast as this one (I received mine about a week before Christmas), I'll probably shop around for a different cinewhoop. I'm new to FPV and have mostly just been flying over grass as I am still learning. I contacted GEPRC two days ago about the frame issue but haven't gotten a response yet. I absolutely love this quad and hope I just got one out of a bad batch. I just want to give a heads up since I haven't heard much in terms of frame problems.
I bought one myself and it arrived last week. It flies just great with a full gopro 10! Its obviously heavy and not good for freestyle but even with a huge 1400mah 6s battery, its great for slow cinematic shots. With all that weight, its very tame and controlable when indoors. Got 7-8 minutes with this setup. Also flown it with a gopro bones and the same big battery, got 9-10min flight times and very agile, even with this battery which is bigger than the one they recommend... but i really like heavy quads for indoor real estate and architecture tours, so even with a whoping 620g total weight with gopro10 + 1400mah 6s, i really enjoy flying it.
Cool, I like it. It's been a while since I have flown so I had to charge up some batteries to go out and fly my Foxeer cinewhoop just to satisfy the urge to fly after watching your video this morning. ;-) I think Geprc will have another winner with this new drone. Cheers from down south !
Very nice and stable with a lot of options. I really enjoyed the flight. We all know our friends passing by on the road by there car. Captain knows them also by there drone or plane😅. Great review. Thanks Captain
Wow. That GEPRC CINEBOT30 FLIES SO SMOOTH. I really enjoyed your video. It was on the top of my search for the cinebot30. Thank you for shari g. I had one concern. When you caught that drone out of the air, it was impressive, but risky. Please avoid catching any drone that is powerful enough to cause injury. Safe rule of the wise, if you wouldn't touch it with it armed and props spinning, then you shouldn't touch the props with the battery plugged in at all. Catching that drone from the bottom is a huge risk. Accidents happen, and electronics are not perfect. Please plug in the battery on the takeoff surface. Unplug battery after drone has landed, is disarmed, and transmitter is secure. Then, it will be properly safe to handle it near or around the props. I would encourage you to share some safety information in a future video to give your audience a good idea of proper drone handling and operating. Thank you again for your time and video!
Love it! Just ordered the o3 version with crossfire,, cant wait. They are on backorder now for a bit. I guess that is a good sign,, lol happy flying from Clearwater fl
Since I am a newbie on FPV drones I was thinking of purchasing a DJI goggles V2 version instead of a V1 used ones in order to get compatibility with 03 system as well. The V2 support 03 DJI unit while the V1 does not. Hopefully the V2 has a full compatibility with Vista or Air unit.
Great video. I cannot figure out how these GPERC drones are build and how to set them up? Do you have to build it, if so, does it require soldering? How is the setup? Do you have to configure ever single parameter, like you had to with Pixhawk controllers? Do they have some sort of flight modes or is it pure manual flight? Thanks.
These are in the advance drone category which means you require knowledge of transmitters and receivers and configuration software and you need hand/eye coordination piloting skills.
@@CAPTAINDRONE798 I how to fly helicopters and planes and own a bunch of DJI drones, including the FPV one. Built my first drone 10 years ago and hated all that setting up, messing around with flight controller and soldering. I was hoping that FPV drones made it past that. You know, made it more user friendly. I guess not. Unless of course you go with DJI again. I don't mind the DJI stuff, but the last thing I would want to do is crash that FPV drone. Whereas with other drones, parts are cheap and putting it back together is not the end of the world... Thanks.
@@fc1133 you might have that backwards. FPV drones are the easiest drones on the planet to repair. You see, as a person learns the FPV hobby they also learn how everything works so every FPV pilot is their own repairman. Certainly FPV is difficult but everyone you see on RUclips flying FPV all began with zero knowledge. So if ya wanna get into FPV it is certainly doable and all up to you.
@@CAPTAINDRONE798 I know what you mean, and I agree. I just hate soldering, ha ha. I am also not a fan of having to setup all the parameters, but maybe it's not as bad as I think. Have to watch a video on how to do it... Thanks.
Many thanks for sharing Captain; I have purchased (in the last 3mths) 2 x older "racing / FPV drones that were quite expensive when new however turned out to be quite ordinary, particularly regards low speed / height control; moral of the story; dont skimp on this style of Drone !!!!; will look at purchasing one of the variations on your link!
As a Cinebot30 owner that has crashed many many mannny times I can confirm it is definitely very durable and love everything but I just wish the batterie’s lasted longer than 3 minutes (4s battery)
Could you please tell me which drone would be better between the sg907 max or the new aviator 8811 pro? I have a choice to purchase either of these drones and I don't know which way to go and I trust your judgment fully.. PLEASE HELP ME!!!
Love the video I got the geprc Cinilog35 performance 6s even with gopro hero 9 it's got so much power and is so smooth on your recommendation this one looks great tho
Hey Steve loved this video, really think this vids gonna make me go fpv, have you got any suggestions on what specs to go for me, I wish to just fly with a gopro 11 not fussed about the bulit in camera, I havnt got a contorler or headset either any suggestions?
To fly with the weight of a GoPro 11 means you should look at a drone with 3.5 up to 5 inch props because that is plenty of weight. Have you watched my video series entitled CAPTAIN DRONE FPV FOR BEGINNERS… there are 12 episodes.
I have a drone question sir. I am trying to get my 2nd drone. I have a $170us budget. I really like the kf101 max but I can't find it at this price point. Do you have anyone that could help or anywhere to find something similar.
Ithoroughly enjoy your videos and value your input. For a beginner fpv flier that has does have a regular mavic air. Would ypu suggest avata or something like this.? Thanks again
Hi again from Toronto Capitan Drone, your videos were very helpful in the past. I am looking to order GEPRC CineBot 30 6S TBS Nano RX version and looking to order the TBX Tango 2 controller, I am seeing there are few options out there, including new one coming soon. I was wondering which is the best one for this set up. I am planning to use it with DJI Goggles Integra, not sure if I need to consider different Goggles option as well. Thanks in advance for your reply.
I do not own a TBS TANGO 2 Transmitter so can't comment on that. However, as long as you get the CINEBOT 30 with the DJI 03 Air unit, then your FPV Goggles will work fine. As for a receiver in the drone, if you do buy the TBS TANGO 2, then the receiver should be a TBS Nano.
@@CAPTAINDRONE798 thanks for the reply. I own the DJI fpv controller 2, but after watching a bunch of reviews I decided to go with a tango 2. I also recently purchased the DJI Avata, but had some very strange connection issues with the drone flying just 200m away from me. The CineBot 30 seems a great solution for combined flying both indoors and outdoors, so I kind of decided to go with it. Your review is great. Actually your channel is first stop now when I think of ordering some new drones. I am new to the FPV world 🌎 and find your reviews and “How to” videos extremely helpful. I was also very happy to see that you are in based in Canada.
Hello. Thanks for yours video. Can you help me. I have a question about dji fpv controller 2 and cinebot30 with O3 unit. Does it work together and what kind of cinebot 30 I need to purchase?
Hi Captain… I am in the middle of purchasing my first cine whoop but i am unable to choose from a cinebot 30 or Cinelog 35 v2.. I have a cinelog 25 v2 frame which am planning to custom build with Iflight Blitz F7 55A io so I can go 6s for some stability. Can you please recommend which one to go out for. Thanks
Hiya Captain, hey please can you try and find the time to review the too good to be true, ultra bargain, AE-3 Pro Max drone?! I'm a novice pilot but have enough experience to be blown away by what you get for your money, like lazer obstacle avoidence, 3 axis gimbal, excellent build quality and much more. And all for £160 or approximately $110! I'd love to hear what you have to say! Cheers matey, from the UK 🙏
Hi Steve What is the best battery for 6S FPV?? We are thinking about visiting Canada from Denmark.... Where do you recommend us to stay, we want to fly drones, but it also have to be kid-friendly!??
Battery size depends on the drone being flown. Canada is crazy large, so you'd have to be extremely specific as to what town or city you are staying/visiting. If I've been to the area you are travelling to, then I may have some info.
If that is the case then I normally mention things like that in the video. All DJI O3 Air units will easily transfer the files off the micro SD card by just plugging in your USB C cable to it.
great video, I have a question about the receivers, If I have a dji controller 2 I know Im good with taking the pnp version with the O3, but if I choose the tbs nano just to have the option in the future to change controller do my dji controller work to or I will need another controller. Im thinking on getting next a tx16 with the module or a tango 2 just asking to be shure. Thanks to anyone that can help
DJI FPV Controller 2 can only talk to a DJI FPV receiver. CROSS FIRE is a RECEIVER, so you need a CROSS FIRE Transmitter to talk to it. If you get a TX16S, you'll still need to buy the CROSS FIRE transmitter module to place on the back of it.
Love your video's, very informative, I was wondering if you can advise how to pair the DJI camera that comes with the Cinebot 30 to the DJI FPV V2 goggles,
Just link them via the link button on the drone and on the goggles. I'm guessing you have long figured this out since I see this comment is now 7 days old.
Hey Captain drone, nice review. Question for you, I am looking to get the cinebot 30 with the dji O3, I plan on using my dji goggle 2 and fpv controller, on geprc page, which receiver option should I pick? Appreciate your response in advance.
pick PNP. Then watch videos to learn how to set your Goggles for O3 and also learn how to bind and finally watch videos on how to setup a drone in BETAFLIGHT CONFIGURATOR.
Hey ya'll. What controller would anyone recommend to me for the O3 HD version? Don't wanna go DJI one for obvious limitations of I decide to get a bigger drone down the road. I am new to FVP, only have dji Mavic pro. Thank you for suggestions.
ELRS or CROSSFIRE then. I'm a fan of CROSSFIRE and I simply have a CROSSFIRE NANO module that I can fit onto the back of any of the radios I wish to use.
Nice video, thanks for sharing! Subscribed :) I've been flying drones since 2013 (started with DJI F450 DIY) but would like to get into FPV and cinewhoop. The GEPRC Cinebot30 looks like a good one to start with. I'm curious about the DJI RC you're using, I have something similar with my Phantom 4, is there a receiver that I can bind to with that RC? Or do I need to get something new like the Radiomaster T16S? Thanks!
The RC you have for your Phantom is what is known as a TOY CONTROLLER. The reason they are called TOYS is because they are designed to only work with the Phantom and nothing else so when you toss away your Phantom, you also toss away your controller. To get into the FPV Hobby you would need a programable RC radio. Radiomaster is a good choice.
How about a video showing how to get this thing set up to fly rite out of the box? Binding procedure with Goggles 2 and binding to the radio using a Crossfire module in a TX16. Please and Thank you.
Have a look at my FPV FOR BEGINNERS video which will get you started: There are two episodes, one DIGITAL and one ANALOG. Both older videos, but you'll get the idea of what needs to be done: ruclips.net/video/LW7JzNQ7P7E/видео.html ruclips.net/video/twPV6SEwZhI/видео.html
Thank you for your kind review. Could you share your thoughts about the noise level of this drone compared to cinelog30? In the video it sounds little bit louder than cinelog30, does it? Thanks!
Hi there. I appreciate if anyone can help... I just bought my first drone, a cineboot30 (ELRS 2.4 receiver). I am trying to configure it in Betta Flight to use it with DJI FPV controller 2, it is possible? I am missing something? Maybe I am making a newbie mistake, or just it is not possible and I need other controler build in ELRS 2.4?? thanks for any advice
Since you bought a drone with an ELRS receiver it means a person only does this because they own an ELRS Radio. If you don’t own an ELRS radio then you have to remove the ELRS connection and reconfigure the drone in Betaflight Configurator.
The frame is quite similar to cinelog series, if not the same. Is this cinebot line replacing cinelog series? I really don't see anything special about this drone compared to my cinelog35.
Easy… no one in the FPV hobby will follow or care about remote ID rules because FPV drones are not consider a Spy drone or threat because they are all flown in small areas for the joy of freestyle and going through objects.
@@CAPTAINDRONE798 Hope you are Right. What are Planes doing below 1000' AGL except when on Base and final or an instrument approach? There is no problem if we stay out of their way.
Why can't Drone Cameras be mounted on a Gimble so the can remain level no matter the attitude of the Drone. just in Tilt. You want to see the Horizon when Banking in a turn.
The FPV hobby has never asked for this due to how pilots fly in Acro Mode so you’ll have to go with DJI and their HYBRID FPV DRONE of either Avata or DJI FPV.
Hi, may I know if there is a need to know about betaflight configurator if one wants to fly this drone? I am new to fpv so I am not so sure of what to do to set up the drone. Till now I am only aware that one needs to have the dji goggles and transmitter to fly this drone. Other than these do you need anything else? Thanks.
Hola Mr, acabo de probar este drone, solo hice hover, pero se carga mucho hacia la derecha, es correcto?, o tengo que hacer algo en betaflight?, muchas gracias por su ayuda. Saludos desde México.
si estas volando estabilizado es normal que se mueva para algún lado si no esta bien calibrado en betaflight. Pero lo mejor es volarlo en Acro para sacarle su potencial (y ahi no se va a mover salvo que tú lo hagas)
![☀ Маленький, но злой. Синевуп по фен-шую [GepRC Cinebot30]](http://i.ytimg.com/vi/_eR-XCImn8c/mqdefault.jpg)
The Cinebot 30's prop guard frame cracks if you hit something head on. You don't have to be going very fast (medium speed). I've noticed cracks in the frame where the camera cage meets the prop guards, and also, for some reason, just under the antenna mount in the back (also in the plastic, prop guard frame). The cracks are forming where the two camera cage screw holes are. The plastic is very thin there and is prone to easily breaking. If you've bumped into anything, check the frame for cracks.
I've ordered a new frame to replace the cracked prop guard, but if the next frame cracks as fast as this one (I received mine about a week before Christmas), I'll probably shop around for a different cinewhoop. I'm new to FPV and have mostly just been flying over grass as I am still learning.
I contacted GEPRC two days ago about the frame issue but haven't gotten a response yet.
I absolutely love this quad and hope I just got one out of a bad batch. I just want to give a heads up since I haven't heard much in terms of frame problems.
I’d really like to know how it flies with a full size GoPro11. I might have it buy it if that works!
me too
I bought one myself and it arrived last week. It flies just great with a full gopro 10! Its obviously heavy and not good for freestyle but even with a huge 1400mah 6s battery, its great for slow cinematic shots. With all that weight, its very tame and controlable when indoors. Got 7-8 minutes with this setup.
Also flown it with a gopro bones and the same big battery, got 9-10min flight times and very agile, even with this battery which is bigger than the one they recommend... but i really like heavy quads for indoor real estate and architecture tours, so even with a whoping 620g total weight with gopro10 + 1400mah 6s, i really enjoy flying it.
@@rafaelm3404 awesome man, great info. Thanks for taking the time.
Finally the one we've been waiting for has arrived, it's similar to cinerace20 with led
I'll have to put this on my wish list!
The Cinebot is a very cool woop. Thanks again!
I love this video 🤩📸
About time!
Another neat drone and review Steve.
2 years after review but still good, will buy for practices like my first FPV drone :) greetings from Ukraine
Great video 🎉
Thank you 😁
Enjoy the week always great review
Pulled straight from the Speedybee Flex 25
Omg I feel like I need this one. Top shelf cine 👍
nice review Captain looks smooth and fast prise about right keep them coming.
Good evening nice video cool review
Thank you
Looks great - can't wait to fly mine ... IF I can ever get the micro sd card inserted in the 03 air unit! It's freaking IMPOSSIBLE!
thanks sir steve. you are the most trusted , source of info.
I appreciate that!
Hi Steve....Really enjoyed the review.
Really nice set up
Cool, I like it. It's been a while since I have flown so I had to charge up some batteries to go out and fly my Foxeer cinewhoop just to satisfy the urge to fly after watching your video this morning. ;-) I think Geprc will have another winner with this new drone. Cheers from down south !
I love it when I can inspire people to go out and enjoy the hobby. I get the exact same feeling often after watching other people fly.
nice Capt.Drone i wonder if have one
I like the drone
I think it's perfect to take pictures with GoPro!
Very nice and stable with a lot of options. I really enjoyed the flight. We all know our friends passing by on the road by there car. Captain knows them also by there drone or plane😅. Great review.
Thanks Captain
Can’t wait to see a 3.5” prop version
Wow. That GEPRC CINEBOT30 FLIES SO SMOOTH. I really enjoyed your video. It was on the top of my search for the cinebot30. Thank you for shari g. I had one concern. When you caught that drone out of the air, it was impressive, but risky. Please avoid catching any drone that is powerful enough to cause injury. Safe rule of the wise, if you wouldn't touch it with it armed and props spinning, then you shouldn't touch the props with the battery plugged in at all. Catching that drone from the bottom is a huge risk. Accidents happen, and electronics are not perfect. Please plug in the battery on the takeoff surface. Unplug battery after drone has landed, is disarmed, and transmitter is secure. Then, it will be properly safe to handle it near or around the props. I would encourage you to share some safety information in a future video to give your audience a good idea of proper drone handling and operating. Thank you again for your time and video!
Sounds good
please always mention the flight time with or without a gopro.. thanks
Love it! Just ordered the o3 version with crossfire,, cant wait. They are on backorder now for a bit. I guess that is a good sign,, lol happy flying from Clearwater fl
Enjoy!
Excellent Review Video. Very Nice FPV. Thank You.
The footage is really great
Very cool 🤝😎
Hi Great review One Love
Thanks so much
Very cool cinewhoop.
Man.... late October and Ottawa already has frost on the ground... its been much slower in the west
I think the west has snow today. We usually get our first snowfall that remains on the grass by end November or early December.
Since I am a newbie on FPV drones I was thinking of purchasing a DJI goggles V2 version instead of a V1 used ones in order to get compatibility with 03 system as well. The V2 support 03 DJI unit while the V1 does not. Hopefully the V2 has a full compatibility with Vista or Air unit.
V2 goggles work with O3 and Caddx.
Great review.
Thanks!
Great video, thank you
great review sir.
Thank you
Requesting for DJI AVATA vs CINEBOT30 with DJI O3 AIR UNIT comparison which one is better please
Thankx
Great video. I cannot figure out how these GPERC drones are build and how to set them up? Do you have to build it, if so, does it require soldering? How is the setup? Do you have to configure ever single parameter, like you had to with Pixhawk controllers? Do they have some sort of flight modes or is it pure manual flight? Thanks.
These are in the advance drone category which means you require knowledge of transmitters and receivers and configuration software and you need hand/eye coordination piloting skills.
@@CAPTAINDRONE798 I how to fly helicopters and planes and own a bunch of DJI drones, including the FPV one. Built my first drone 10 years ago and hated all that setting up, messing around with flight controller and soldering. I was hoping that FPV drones made it past that. You know, made it more user friendly. I guess not. Unless of course you go with DJI again. I don't mind the DJI stuff, but the last thing I would want to do is crash that FPV drone. Whereas with other drones, parts are cheap and putting it back together is not the end of the world... Thanks.
@@fc1133 you might have that backwards. FPV drones are the easiest drones on the planet to repair. You see, as a person learns the FPV hobby they also learn how everything works so every FPV pilot is their own repairman. Certainly FPV is difficult but everyone you see on RUclips flying FPV all began with zero knowledge. So if ya wanna get into FPV it is certainly doable and all up to you.
@@CAPTAINDRONE798 I know what you mean, and I agree. I just hate soldering, ha ha. I am also not a fan of having to setup all the parameters, but maybe it's not as bad as I think. Have to watch a video on how to do it... Thanks.
would be cool if compare with cinelog30!
Many thanks for sharing Captain; I have purchased (in the last 3mths) 2 x older "racing / FPV drones that were quite expensive when new however turned out to be quite ordinary, particularly regards low speed / height control; moral of the story; dont skimp on this style of Drone !!!!; will look at purchasing one of the variations on your link!
As a Cinebot30 owner that has crashed many many mannny times I can confirm it is definitely very durable and love everything but I just wish the batterie’s lasted longer than 3 minutes (4s battery)
Could you please tell me which drone would be better between the sg907 max or the new aviator 8811 pro? I have a choice to purchase either of these drones and I don't know which way to go and I trust your judgment fully.. PLEASE HELP ME!!!
Nice video, i made also a Unboxing from my Cinebot 30
Love the video I got the geprc Cinilog35 performance 6s even with gopro hero 9 it's got so much power and is so smooth on your recommendation this one looks great tho
what happens if the stability test is not successful? PLEASE HELP
Hey Steve loved this video, really think this vids gonna make me go fpv, have you got any suggestions on what specs to go for me, I wish to just fly with a gopro 11 not fussed about the bulit in camera, I havnt got a contorler or headset either any suggestions?
To fly with the weight of a GoPro 11 means you should look at a drone with 3.5 up to 5 inch props because that is plenty of weight. Have you watched my video series entitled CAPTAIN DRONE FPV FOR BEGINNERS… there are 12 episodes.
Great Review, looks interesting. Btw: What gloves do you have? They look cool too. Mind sharing a link?
They are gloves from days of old. I made a vid about them here: ruclips.net/video/0KSZKmuyFjc/видео.html
Nice vídeo, please can you tell me how to activate the function to turn the lights on and off ?
In BETAFLIGHT CONFIGURATOR under the MODES tab you can assign a switch to it.
I have a drone question sir. I am trying to get my 2nd drone. I have a $170us budget. I really like the kf101 max but I can't find it at this price point. Do you have anyone that could help or anywhere to find something similar.
Ithoroughly enjoy your videos and value your input. For a beginner fpv flier that has does have a regular mavic air. Would ypu suggest avata or something like this.? Thanks again
DJI is the king of making beginner drones so if you can afford the Avata, go with that.
Best review on this drone. Just bought one but cannot find if this whoop can bind with the DJI FPV controller 2 that comes with the DJI FPV drone???
If the one you purchased has the DJI 03 system in it, then yes it will bind.
Hi again from Toronto Capitan Drone, your videos were very helpful in the past. I am looking to order GEPRC CineBot 30 6S TBS Nano RX version and looking to order the TBX Tango 2 controller, I am seeing there are few options out there, including new one coming soon. I was wondering which is the best one for this set up. I am planning to use it with DJI Goggles Integra, not sure if I need to consider different Goggles option as well. Thanks in advance for your reply.
I do not own a TBS TANGO 2 Transmitter so can't comment on that. However, as long as you get the CINEBOT 30 with the DJI 03 Air unit, then your FPV Goggles will work fine. As for a receiver in the drone, if you do buy the TBS TANGO 2, then the receiver should be a TBS Nano.
@@CAPTAINDRONE798 thanks for the reply. I own the DJI fpv controller 2, but after watching a bunch of reviews I decided to go with a tango 2. I also recently purchased the DJI Avata, but had some very strange connection issues with the drone flying just 200m away from me. The CineBot 30 seems a great solution for combined flying both indoors and outdoors, so I kind of decided to go with it. Your review is great. Actually your channel is first stop now when I think of ordering some new drones. I am new to the FPV world 🌎 and find your reviews and “How to” videos extremely helpful. I was also very happy to see that you are in based in Canada.
You should host a giveaway of this drone, to the first comment poster wearing a blue shirt and holding a dji smart controller.🤔
Can I use the newer DJI fpv controller ? With the same version that you
Have correct because I just ordered an I’m
Waiting on it to
Come😊
Hello. Thanks for yours video. Can you help me. I have a question about dji fpv controller 2 and cinebot30 with O3 unit. Does it work together and what kind of cinebot 30 I need to purchase?
Watch my video entitled CAPTAIN DRONE FPV FOR BEGINNERS episode 12, and you'll have all your answers.
@@CAPTAINDRONE798 thanks I'v just seen it
That was so cool to watch! Felt like I was flying.
I'm wondering if the guy flying the plane was mad when you got close?
Oh, they are all used to me buzzing around their planes.
Cinebot30 vs PAVO25? I think im ready to move on from my Tinyhawk 3 but not quite ready to pull the trigger on an Avata. Great video as always!
Hi Captain… I am in the middle of purchasing my first cine whoop but i am unable to choose from a cinebot 30 or Cinelog 35 v2..
I have a cinelog 25 v2 frame which am planning to custom build with Iflight Blitz F7 55A io so I can go 6s for some stability. Can you please recommend which one to go out for. Thanks
You buy a drone based on size, 25, 30, 35 only if you want to mount an external camera…. The bigger the drone, the more it can lift.
What receiver do i get with thr sam version you have
what is the flight time with and without action 2
Better than the Cinelog35 Performance edition?
Not better, more similar, but also more refined.
prodotto molto interessante
Hiya Captain,
hey please can you try and find the time to review the too good to be true, ultra bargain,
AE-3 Pro Max drone?!
I'm a novice pilot but have enough experience to be blown away by what you get for your money, like lazer obstacle avoidence, 3 axis gimbal, excellent build quality and much more.
And all for £160 or approximately $110!
I'd love to hear what you have to say!
Cheers matey, from the UK 🙏
Hi Steve
What is the best battery for 6S FPV??
We are thinking about visiting Canada from Denmark....
Where do you recommend us to stay, we want to fly drones, but it also have to be kid-friendly!??
Battery size depends on the drone being flown.
Canada is crazy large, so you'd have to be extremely specific as to what town or city you are staying/visiting. If I've been to the area you are travelling to, then I may have some info.
Why cineBOT and how does it compare with cineLOG?
How’s it compare to Avata?
What's the difference between the Cinebot and the Cinelog series?
Excellent review..... How can I install a GPS and get the RTH to work when I use it outdoors?.... how far can I go with CRF RX.?.... Thank you.
É chow amigo
Tmj ✌✌✌
I was wondering if you taking any blackbox log of the CineBot 30? Particularly looking at the motor performance?
Nope, I have not used the black box feature.
Are this drones also have an arrow to point home on the screen?
Nope. You need a GPS for that.
@@CAPTAINDRONE798 Ok. Thanks for the info.
Do you have to take the CInebot30 apart to fit the micro sd card into the o3 air unit on the cinebot30?
If that is the case then I normally mention things like that in the video. All DJI O3 Air units will easily transfer the files off the micro SD card by just plugging in your USB C cable to it.
great video, I have a question about the receivers, If I have a dji controller 2 I know Im good with taking the pnp version with the O3, but if I choose the tbs nano just to have the option in the future to change controller do my dji controller work to or I will need another controller. Im thinking on getting next a tx16 with the module or a tango 2 just asking to be shure. Thanks to anyone that can help
DJI FPV Controller 2 can only talk to a DJI FPV receiver. CROSS FIRE is a RECEIVER, so you need a CROSS FIRE Transmitter to talk to it. If you get a TX16S, you'll still need to buy the CROSS FIRE transmitter module to place on the back of it.
How to configure the switch for the led?
Go into BETAFLIGHT CONFIGURATOR and then to the MODES tab and you'll figure it out.
I'm having difficult to bind my Cinebot30 ELRS with my Radiomaster ELRS Pocket. Can you do a video showing how to do it?
I show how on my ELRS POCKET set up and bind video.
Love your video's, very informative, I was wondering if you can advise how to pair the DJI camera that comes with the Cinebot 30 to the DJI FPV V2 goggles,
Just link them via the link button on the drone and on the goggles. I'm guessing you have long figured this out since I see this comment is now 7 days old.
Hey Captain drone, nice review. Question for you, I am looking to get the cinebot 30 with the dji O3, I plan on using my dji goggle 2 and fpv controller, on geprc page, which receiver option should I pick? Appreciate your response in advance.
pick PNP. Then watch videos to learn how to set your Goggles for O3 and also learn how to bind and finally watch videos on how to setup a drone in BETAFLIGHT CONFIGURATOR.
Hey ya'll. What controller would anyone recommend to me for the O3 HD version? Don't wanna go DJI one for obvious limitations of I decide to get a bigger drone down the road. I am new to FVP, only have dji Mavic pro. Thank you for suggestions.
ELRS or CROSSFIRE then. I'm a fan of CROSSFIRE and I simply have a CROSSFIRE NANO module that I can fit onto the back of any of the radios I wish to use.
Nice video, thanks for sharing! Subscribed :)
I've been flying drones since 2013 (started with DJI F450 DIY) but would like to get into FPV and cinewhoop. The GEPRC Cinebot30 looks like a good one to start with. I'm curious about the DJI RC you're using, I have something similar with my Phantom 4, is there a receiver that I can bind to with that RC? Or do I need to get something new like the Radiomaster T16S? Thanks!
The RC you have for your Phantom is what is known as a TOY CONTROLLER. The reason they are called TOYS is because they are designed to only work with the Phantom and nothing else so when you toss away your Phantom, you also toss away your controller. To get into the FPV Hobby you would need a programable RC radio. Radiomaster is a good choice.
Which do you think is better cineLog 30 or cinebot 30?
Both are great. I think most would go for the Cinebot due to the flight time & lights.
Can this google work with new 03 unit??
Muito bom, mas da para gravar com cartão Sd no drone?
No, you can not put a micro sd card in the FPV drone.
How about a video showing how to get this thing set up to fly rite out of the box? Binding procedure with Goggles 2 and binding to the radio using a Crossfire module in a TX16. Please and Thank you.
Have a look at my FPV FOR BEGINNERS video which will get you started: There are two episodes, one DIGITAL and one ANALOG. Both older videos, but you'll get the idea of what needs to be done:
ruclips.net/video/LW7JzNQ7P7E/видео.html
ruclips.net/video/twPV6SEwZhI/видео.html
How would you compare it to it’s brothers the cinelog30/cinelog35 (and cinelog35 performance)?
The cinebot30 is a more modern design. The 35 is definitely faster.
Thank you for your kind review. Could you share your thoughts about the noise level of this drone compared to cinelog30? In the video it sounds little bit louder than cinelog30, does it? Thanks!
All of these FPV cine drones sound like a vacuum cleaner at various volumes.
Hi there. I appreciate if anyone can help... I just bought my first drone, a cineboot30 (ELRS 2.4 receiver). I am trying to configure it in Betta Flight to use it with DJI FPV controller 2, it is possible? I am missing something? Maybe I am making a newbie mistake, or just it is not possible and I need other controler build in ELRS 2.4?? thanks for any advice
Since you bought a drone with an ELRS receiver it means a person only does this because they own an ELRS Radio. If you don’t own an ELRS radio then you have to remove the ELRS connection and reconfigure the drone in Betaflight Configurator.
The frame is quite similar to cinelog series, if not the same. Is this cinebot line replacing cinelog series? I really don't see anything special about this drone compared to my cinelog35.
Not really sure. There are certainly differences but for most people it comes down to price and features.
What's it's weight the way you were flying it. Under the .55 Lbs for the US. What happens when the USA Requires Remote ID?
Easy… no one in the FPV hobby will follow or care about remote ID rules because FPV drones are not consider a Spy drone or threat because they are all flown in small areas for the joy of freestyle and going through objects.
@@CAPTAINDRONE798 Hope you are Right. What are Planes doing below 1000' AGL except when on Base and final or an instrument approach? There is no problem if we stay out of their way.
@@HoundDogMech Those are RC planes
Why can't Drone Cameras be mounted on a Gimble so the can remain level no matter the attitude of the Drone. just in Tilt. You want to see the Horizon when Banking in a turn.
The FPV hobby has never asked for this due to how pilots fly in Acro Mode so you’ll have to go with DJI and their HYBRID FPV DRONE of either Avata or DJI FPV.
Back in the day, ppl used to build 10inch quadcopter with gopro mounted on 3 axis BGC gimbal. Look up TBS discovery / ImmersionRC Xugong10
@@junkmonkster those home built drones had a GPS unit
If I get the Cinebot 30 with the DJI air 03 unit, do I still need a camera as well? I'm new to this.
No camera needed
Hi, may I know if there is a need to know about betaflight configurator if one wants to fly this drone? I am new to fpv so I am not so sure of what to do to set up the drone. Till now I am only aware that one needs to have the dji goggles and transmitter to fly this drone. Other than these do you need anything else? Thanks.
Yes. 99% of FPV Drones in the FPV RC Hobby need to use BETAFLIGHT Configurator.
@@CAPTAINDRONE798 ok thanks！
What controller are you using and do you have a link?
DJI FPV controller (black in color)
would this work with the cetus pro goggles and controller
Only the Analog version would work with those goggles. The controller will not work.
@@CAPTAINDRONE798 ok thanks for telling me
So this is not a sub-250.... Thank you Captain for the thorough review! Does anyone have a suggestion for the best sub-250 with 03?
GEPRC makes a good one. Check out my review of the Cinelog 20.
@@CAPTAINDRONE798 oh! Ok I will thank you! 😊 peace and love to you and yours from Rhode Island
Hola Mr, acabo de probar este drone, solo hice hover, pero se carga mucho hacia la derecha, es correcto?, o tengo que hacer algo en betaflight?, muchas gracias por su ayuda. Saludos desde México.
si estas volando estabilizado es normal que se mueva para algún lado si no esta bien calibrado en betaflight. Pero lo mejor es volarlo en Acro para sacarle su potencial (y ahi no se va a mover salvo que tú lo hagas)
I have the Dji Integra goggles and Dji controller 2. Will this combo work with the Cinebot 30?
Yes, but you really need to understand what you're doing.... Watch this first: ruclips.net/video/zPf9b-X6cFw/видео.htmlsi=cW_pdb6i8fA9d16B
@@CAPTAINDRONE798 Thanks, I really needed to know that, much appreciated
I bought this drone based on your recommendation. How do you install the tubes without breaking it?
Tubes? This is an old comment so I'm sure you have resolved the issue by now.