GepRC Cinebot30 FPV Drone
HTML-код
- Опубликовано: 2 окт 2024
- Get Cinebot30 O3 | 5% off with code potatojet - geprc.com/?ref... (I'm flying the 6s O3 version)
Skagen Smart Watch (3 weeks since I charged it and I'm still at 34% battery!) - amzn.to/3W5MICU
♪♪ Music in this video from ♪♪
Music from Epidemic - bit.ly/31sWjuc (30 day free trial)
►GEAR
Camera Gear I use for RUclips - kit.co/PotatoJ...
Favorite Budget Friendly Camera Gear - kit.co/PotatoJ...
My Favorite Camera Gear for Pro Work - kit.co/PotatoJ...
My Editing Setup - kit.co/PotatoJ...
►Vlog Channel - / genenagata
►Instagram | / genenagata
![☀ Маленький, но злой. Синевуп по фен-шую [GepRC Cinebot30]](http://i.ytimg.com/vi/_eR-XCImn8c/mqdefault.jpg)
![☀ Маленький, но злой. Синевуп по фен-шую [GepRC Cinebot30]](/img/tr.png)
i think the one rule of ALL fpv drones is that the usb port must be placed in the WORST possible position
I’ve been flying on the geprc cinelog 25! You inspired me to get into fpv, and I’m so so grateful. Thank you man. Another tool to add to the arsenal. 🎥
As a cinebot30 with dji 03 owner I can tell that this quad is amazing for indoor but too lightweight when it gets a bit windy. Be aware that you might feel a lot of drift with this little guy.
can you use the DJI controller 2 for non-DJI drones?
@@CheqkoO95 nope
@@CheqkoO95You can as long as the drone your getting has a DJi 03 Air unit installed ...
4:38 Watch Chris rosser’s Beta Flight 4.3 tuning video. It really help me learn fpv tuning in a non intimidating way. Great video by the way.
Man watching these videos make me really want to get into fpv seems like the closest thing to flying, doing a cross country road trip with fpv added to the bucket list.
It’s great. Go with Cetus pro then baby hawk 2 plus + simulator.
I’d crash that within 5 seconds 😂
Just bought the Cinelog 35 v2 and I’m very happy with it. It’s not as agile like my 5“ but it’s more than capable for flying with a Full-Size GoPro and even with a 1500mah 6S LiPo it flys without any problems. First i thought i want the Cinebot30. But now i‘m happy with it and I don’t have to build a naked GoPro at all, which is pretty nice.
Aloha Gene!! Great videos and reviews btw! You got me sold on the Cinebot30 but do you know where I can buy a turn-key cinebot 30 setup (batteries, controller, goggles, etc)? If not, what would your recommended turnkey kit look like? Thank you!!
great video , hows the coffee shop coming along
Nice one how long did the battery last? Also would that model carry a normal GoPro or is it too small ? Cheers 🍻
It's made to carey a gopro
Hey Gene! Where are you flying toward the end of the video? I am a South Bay local. you actually are friends with one of my employees David Pino. Im getting heavily into FPV and need more cool places to fly around the South Bay. Thanks man!
Hey Gene, im a newbie to fpv and would like to buy this one, which receiver did you select for the drone?
We have missed you senor potata 🔥
I love your FPV vlogs! This channel is simply the best! :)
the best thing about fpv drones is the sound of the screaming propellers. So, yes, definitely prefer more sound to less.
Wait… that’s how the video ended???
Can I connect may DJI Control 2 and DJI Google with this dorne ???
Glad you got one, this is my favorite new cinewhoop.
"not as much pull out power"
that's the main issue i have with my mini 3. the exposure on the camera makes the drone almost useless in broad day light
Can I get away with using the DJI remote instead of elrs?
How you know the difference if its pnp
4:50 pretty sure that you cannot tune that behaviour out, what you are doing here is too performance demanding for a 3" cinewhoop, it just reaches the maximum of what it can handle. Dives like this are more in the flight envelope of a 5" non-ducted FPV Quad.
Super ,what expo rates do you use?
Can I install CineBot30 on dji Avata Propeller?
Good video. Thanks. Too bad the watch it is not available on Amazon. Any recommendation on a long lasting battery watch. Let me know. Thank you
New sub here from South Africa. Really enjoy your videos. Videos like this made me buy my cinebot30. Really like this drone. Cheers.
Nice Man New subscriber 🤙🏻🤙🏻😅
Very nice, but the image quality of the recorded O3 footage is pretty horrible.
which RECEIVER OPTION do you recommend
man. what happend with your footage>??? did you shoot at 24 fps????
I was wondering all video if the cinebot could be better than my Protek 35. I like it this video, I see that you got really into fpv, I got hook in to fpv because of you. Thanks and not Thanks for that, I waisted as money as I am starting to enjoyi flying, but y fried some FC and ESC, and AIOs in the way before know how to repair and add things to my drones,. But I can say that I enjoy fpv and I am not bad at it.
Can you bind the DJI FPV remote 2 with this Cinebot 30?
I believe anything with a DJI o3 air unit
I am sorry to see your personnal channel becoming an FPV and other gadgets stuff to buy. Where are the coffee shop, the friends, house, hollidays, dogs ? Take care
Hey man, can i use the this setup with rc dji?
I was wondering if you taken any blackbox log of the CineBot 30? Particularly looking at the motor performance?
I know it sounds silly but I going for that dawin FPV hulk with the 03 🤣, then all the other bnf I can get my hands on 😂. Love the video I feel same way bro I just want fly not build, nice video take care have fun👍
Hey great video.. just wondering I’ve had the avata but looking to get first fpv drone thinking of the mark5 using my avata controller and goggles. Any other recommendations? Hope all is well
Hello, Gene
we've missed you!!!
Are you still doing the Potato Farm project?
if yes how would I apply?
I wonder how effective the propguards are @ protecting humans? Ever heard of an accident of a drone with propguards (related to the props ofc)?
what controller and goggles do you have
Which cammera settings are you using
Every RUclips video should end with random go-carts.
OMG, your new bathroom looks soooooo much better! Conflagrations! You should throw a bathroom reveal party.
Can you bind this drone with dji goggles2 and rc controller straight out of the box?
Potato Jet fpv channel! Love it!! just bought little brother of this, Cinelog 25 with go pro, man it fly good for videos!
In the USA, this drone will be illegal to fly in all but FRIAs in less than a year.
Potato I like better
wihch controller you have ?
is this cinebot30 include O3 unit?? or do i have to buy ??
Cinelog 35 v2 review please
Jeaj, another FPV-Drone Video...... =/
what batteries should I use for this drone for 10mins of fly time? i was thinking the 1300 6s batteries but are there better option
I wouldn't go higher than 1100mah 6S ... I use tattu 1050mah 6S and get 7 minutes of real flying , not just slow cruising
I so much like your videos!! Very interesting and positive 👌🏼👍🏼 happy new year 🎄🥳
Hi waiting for it… no room for a gps for RTH rescue ?
Very cool man
Great video. I cannot figure out how these GPERC drones are build and how to set them up? Do you have to build it, if so, does it require soldering? How is the setup? Do you have to configure ever single parameter, like you had to with Pixhawk controllers? Do they have some sort of flight modes or is it pure manual flight? Thanks.
You don't have to build anything comes pre-built, but don't know what a pixhawk is but never needed anything like that, just a controller with ELRS or whatever you use. You can tune it in Beta Flight, it's pure manual.
how long did it take for you to Receive the drone after you ordered it?
you deserve million subs
What’s the max speed in that drone?
Do you have to take the CInebot30 apart to fit the micro sd card into the o3 air unit on the cinebot30?
Yes, but if you spend few minutes to take it apart and make that usb-c hole in a prop guard frame a little bigger (it's soft plastic, sharp knife or file will do the trick) you will gain access to sdcard slot.
It’s possible to fly indoors?
Cinebot 30 > Avata
just tell me to make videos
Go make videos
interesting
poor quality
I got the radiomaster tx-12 mark 2 last summer. Been training in the simulator and thinking of getting the cinebot 30 in the spring together with the new dji goggles. I'm pretty excited to finally get my first fpv drone!
Dec/22 I got this Cinebot 30 DJI O3 Air Unit PNP model, VERY disappointed with GEPRC, they just bolted the O3 unit to the drone and never paid attention that it is IMPOSSIBLE to slide a SD card in the O3 slot or to use the O3 USB port.
I had to completely disassemble the Cinebot30 O3 and make holes in the plastic frame to be able to use it. I also have other issues, I don't think O3 is getting enough voltage as the image is very grainy. Open a ticket with GEPRC is a complete joke, I have emailed , open tickets and never heard from them. The only ones bragging about this company are the ones receiving free drones for reviews - STAY AWAY FROM GEPRC, they used to be Ok
are you still having issues with this drone i was about to order one to add to the collection since i had the goggles and fpv controller is it not worth i??
@@Dontcrapout I would avoid, the excuse they gave to me is that many of their techs have Covid, so perhaps who is assembling them are not knowledgeable enough. They told me to fix it myself or send back to them...yeas, send back to China on my dime ($65), they took 3 weeks to ship after getting my $600, just imagine sending it back on my dime and wait even more, I will completely disassemble and re assembly, my problem is time...hence why I got a PNP first place. Much easier and cheaper build it yourself, I am done dealing with Chinese direct. And PayPal was not help either on my claim, guess they are harboring Chinese vendors now, the next step I had to get a tracking number (shipping to back to China) what I don't want so the claim is worthless with them, reason way they only want to be paid with PP....PP gave me $60 as a courtesy for al older member.
@@RCREVIEWS101 that's very unfortunate that this was the customer service you received they sound like assholes.. all in all i personally have the DJI avata and the goggles 2 and the FPV 2 controller so i was searching for a nice little fpv drone that had DJI air unit 3 and was PNP so i could just use the goggles and controller i already owned. my dilemma is im in canada at the moment and cant find a reliable source to find a drone like that without having to wait weeks and weeks and even months for it to be delivered. also now that i hear what you said about your experience i dont know what to do i wanted this quad but now im second quessing myself. do you have any recommendations of any other drones that i should look into. thank you
@@Dontcrapout Yes, I have the Avata as well and 6 other DJI drones and 12 planes. I do have a 3 years old GepRC Rocket lite that flies fine, my guess is the company went down hill with no quality control, testing or after sales support. They should assume when they sell a lemon and make it right, I for once will never buy anything from their brand.
There are reports that the DJI Controller 2 having ranging problems with the O3, I will put a second Rx and use an old Taranis X9D with this set up. Best is not get the PNP if you will adventure yourself in getting one.
@@RCREVIEWS101 im kind of confused so if i have the dji controller 2 is it not good to get a 03 Air unit drone thats already built hence why you said PNP or is their a better route? i primarily have the controller and goggles from dji so i wanted to really fly with that
Try inav
5th?
So cinelog 35 or this one ? :)))
first
First
Hi!
Nice flying 😊
these videos are my comfort area
Most beautiful drone I've seen
Was just there the other day! Flying my mavic…
Why can’t I run into you with all the times I see you filming there. Would be awesome to meet you and fly sometime.
Anyway great video as usual. Thank you!
Gene, do you miss your Jeep? I remember you had one a while back
Edit: the remodelled bathroom looks amazing
Welcome back Gene! Happy holidays to you and Kerry.
omg your washroom has come such a long way. it looks so nice!
love you gene. can you make a 2023 fpv guide please?
Love these vids, thanks Gene!
more like PotatoQuadcopter these days!
Enough drones
I think the Cinebot30 is tuned to be even less aggressive than the other Cinewhoops. They advertise like over 10 minutes flight time. I think thats partially due to the tune.
What’s up Gene.
WOW potato, you are almost a 1M!
The preset for cinewhoops from UAV Tech on Betaflight 4.3.x is amazing. I use it on both my 2.5" and 3.5" whoops and it makes them fly much better. Highly recommend 🤙
Weight?
4:50 yup yaw washouts primarily due to stalling from the propguards + being underpowered for it's weight. You could try running lighter batteries too.
I know youtube smashes it but the first few clips the DVR recording looked better than the actually recording from here. Like WAY better.
Tuning in betaflight 4.3 is actually WAY easier and less intimidating than it used to be. Just take your laptop (or w.e to connect to the quad) and fly a few packs and swap stuff between each flight.
That's some handy advice with diving. Lost my avata yesterday because I was at the top of the cliff and it lost signal and flew off another cliff 😭
More monologues, more FPV cinewhoop, more one handed FPV kart driving!!
Only thing i miss about covid is this vlog. I miss the gang. To bad it has become Fpvdrone show. 😢
Have you test the O3 with Gyroflow?
9:25 'not as graceful as a 5-inch and not as much pull-out power, obviously' - that sounded sus xD
Hi Gene, what kind of battery are you using there? I want to get a 6s bat for my cinelog35 and was planning on the tattu batteries. Would be glad to know how are they and if you recommend them. Thanks!
Have a bunch of tattu 6s batteries, they are great and reliable
Pretty good review , Like your review Gene😍