Bondo on internal doors ? How about lipping those doors in this way those edges won't crack when you slamit.Nice way to arrange the doors if you put them even closer like nearly edge to edge 90° ,you don't need to worry about overspraying the other side of the door. Good work 👍
Here in the Northeast we don't have Southwest Builders. What other SW product would you say it's equivalent to? How hard does it end up drying? Like a latex Proclassic or so?
Question - I used oil based primer / paint and even used Penetrol paint additive to paint a door made of I guess MDF and it dried very matty and I wound up putting a lot of sanding time into it to help it look better but the grooves are hard to get all of the matty spots out. I was thinking about a paint sprayer. Do paint sprayers that can handle oil base leave oil based primer/paint very flat on MDF doors or does it still leave a matty finish that requires sanding?
Was this a first coat? The first coat can often become matte due to porousness in the MDF or wood. Usually, you want to prime first and seal the pores then paint. Penetrol will add sheen to the finish. Prime and 2 coats for a nice finish. Today's water-born trim paints are a little easier to use and are sandable (Ben Moore, Sherwin Wiliams, Behr).
Thank you James, I appreciate the comment! I am with you, I have always been a Laquer man, but this stuff is waterborne and it dries really strong and hard. I have been impressed with it so far, its almost like a hardwood floor sealer, super durable and hard, ill keep working on it and let you know, but so far so good 👍
No probably not..I feel I have more control of my fan location for overlaps without it, so I probably just took it off for the final...may have been clogging up..lol..I can't really remember to be honest, but usually if I can reach all sides I will shoot final with just the gun! Thank you for the comment 👍🙏
That is Always a concern, honestly on these ones, these doors were pre primed mdf, and they have a certain fuzz to them, not all doors have these but I find that these mdf pressboard doors never really lay completely flat...when we go thin to win, its usually worse so we try to build and sand between coats. thanks for the comment 👍 🙏
Yes we really like the 395s... they are a little heavier, but the gallons per minute are more than the 390 so incase you get in a pinch and need to do a bigger job like walls, siding or something bigger, it can work really good for that too. I also have a couple 390s and they work really well, we just keep those running for trim packs, doors, facia, and smaller tip projects ect...thanks for the comment 👍🙏
@@PaintBoss yes , I have the 495 that has been solid for walls ceilings siding etc.. just got a 395 specifically to use only on trim doors and fine finish peices etc.. I will say that for me the 495 has been the best overall sprayer I've owned.. ive had 3 titans and some other units and nothing compares to the quality and longevity of the graco ( at least in my experience) as a fellow painter , I appreciate your work and the time and effort you put into your videos. Maybe someday I won't be so lazy and I'll make some videos showing the world how we paint..
A 310 tip is kind of small for man doors, no? I prefer a 415, or 511. But everyones different. I just feel 310s are for smaller piecs like trim/baseboard
So sorry for the delay...I have been fighting the covid and have finally come back up for air! I can't remember on this one, but usually my go to tip for doors is a 310 fine finish or sometimes with bigger 8ft door packs ill do a 412. Thanks so much for the comment`
@@PaintBoss i have just recovered myself. Was diagnosed positive on the 6-th, now all good. I didnt realy had any symptons. Stay safe my friand. I am looking forward to new videos of yours💪
oh wow! so great to hear you are on the mend! That is wonderful 👏 yes I got it on the 4th of November and am just starting to feel human again...It kicked my butt pretty good, but I think I got it, was getting better and when I went to the Dr to finally get tested, I think I got another strain maybe... my test was positive for covid, sars...I don't know, but I know I am grateful to finally be feeling better and can't wait to get back to work, I have been out since the 4th and am ready to get back in! so glad u recovered and are better, thanks again for the comments 🙏
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
13 passes to shoot a door?……….how about 4-5
Hi! You very professional, very goof tecnic. I have a question. Why you don't prime the bondo, im a painter as well thanks. Saludos from California!
Did you uses a water base paint???
And the glaze putty no need primer before??? Good video, very useful.
Bondo on internal doors ? How about lipping those doors in this way those edges won't crack when you slamit.Nice way to arrange the doors if you put them even closer like nearly edge to edge 90° ,you don't need to worry about overspraying the other side of the door. Good work 👍
I love to hear that 395 knocking in the background. I got the same setup, great machine
isn't that the greatest set up!! That knocking in the background is music to my ears! stokes you have the same setup! my all time favorite!
Fave part: 6:55 🤣
Very informational. Thanks for sharing some of the Platinum Futures secrets, Paint Boss!
Why thank you so much☺🤗 I really appreciate the comment ☺ Thanks Mel!
Here in the Northeast we don't have Southwest Builders. What other SW product would you say it's equivalent to? How hard does it end up drying? Like a latex Proclassic or so?
Did i miss the part of which paint brand you guys use on those doors?
Don't understand why to use an extension on the gun to paint doors
I used to spray like that until I got the stak raks
Question - I used oil based primer / paint and even used Penetrol paint additive to paint a door made of I guess MDF and it dried very matty and I wound up putting a lot of sanding time into it to help it look better but the grooves are hard to get all of the matty spots out. I was thinking about a paint sprayer. Do paint sprayers that can handle oil base leave oil based primer/paint very flat on MDF doors or does it still leave a matty finish that requires sanding?
Was this a first coat? The first coat can often become matte due to porousness in the MDF or wood. Usually, you want to prime first and seal the pores then paint. Penetrol will add sheen to the finish. Prime and 2 coats for a nice finish. Today's water-born trim paints are a little easier to use and are sandable (Ben Moore, Sherwin Wiliams, Behr).
Very informative, but latex on doors. How do you keep them from sticking in the jambs? I prefer lacquer on all trim including doors
Thank you James, I appreciate the comment! I am with you, I have always been a Laquer man, but this stuff is waterborne and it dries really strong and hard. I have been impressed with it so far, its almost like a hardwood floor sealer, super durable and hard, ill keep working on it and let you know, but so far so good 👍
Wow. That's impressive.
Awesome! Thank you so much 👍, I appreciate the comment 😊
Was there a reason the extension was removed for the final coat?
No probably not..I feel I have more control of my fan location for overlaps without it, so I probably just took it off for the final...may have been clogging up..lol..I can't really remember to be honest, but usually if I can reach all sides I will shoot final with just the gun! Thank you for the comment 👍🙏
Seems like the doors are showing a lot of orange peel. What's causing that? Too much paint?
That is Always a concern, honestly on these ones, these doors were pre primed mdf, and they have a certain fuzz to them, not all doors have these but I find that these mdf pressboard doors never really lay completely flat...when we go thin to win, its usually worse so we try to build and sand between coats. thanks for the comment 👍 🙏
@@PaintBoss Thanks again for reply. I'm learning, so I appreciate it.
To much orange peel for my taste
Se parla in inglese la traduzione in inglese a cosa serve?agli imbianchìni sordi ? 😂😂👋🏻
How do you like that 395..is it basically the same thing as the 390?
Yes we really like the 395s... they are a little heavier, but the gallons per minute are more than the 390 so incase you get in a pinch and need to do a bigger job like walls, siding or something bigger, it can work really good for that too. I also have a couple 390s and they work really well, we just keep those running for trim packs, doors, facia, and smaller tip projects ect...thanks for the comment 👍🙏
@@PaintBoss yes , I have the 495 that has been solid for walls ceilings siding etc.. just got a 395 specifically to use only on trim doors and fine finish peices etc.. I will say that for me the 495 has been the best overall sprayer I've owned.. ive had 3 titans and some other units and nothing compares to the quality and longevity of the graco ( at least in my experience) as a fellow painter , I appreciate your work and the time and effort you put into your videos. Maybe someday I won't be so lazy and I'll make some videos showing the world how we paint..
I feel like I can get less orange peel than that with a weeny roller.
Na i pass on that way, to many drips drying out
When do you do the top and bottom? SMH.
Nice work man how do you do your edges before the final coat?
A 310 tip is kind of small for man doors, no? I prefer a 415, or 511. But everyones different. I just feel 310s are for smaller piecs like trim/baseboard
That is my dream garage, haha!
What kind of swivel is on the extension?
I am pretty sure this swivel is made by graco! I will double check tomorrow, thanks for the comment 👍 🙏
This is the Graco Cleanshot, prevents spitting when spraying with extension.
Good tip.thanks👍
Any time!
Real painters
Thank you so much 🙏
No primer?
Bro , you are legit
Great video. What tip size are you using?
You can use 208 FF LP or 210 FF LP
Bondoing the sides? Nobody listen to this guy he’s one of those spend a month on a job overthinks quality and spends money on unnecessary shxt
Os that Green 517 tip??
So sorry for the delay...I have been fighting the covid and have finally come back up for air! I can't remember on this one, but usually my go to tip for doors is a 310 fine finish or sometimes with bigger 8ft door packs ill do a 412. Thanks so much for the comment`
@@PaintBoss i have just recovered myself. Was diagnosed positive on the 6-th, now all good. I didnt realy had any symptons.
Stay safe my friand. I am looking forward to new videos of yours💪
oh wow! so great to hear you are on the mend! That is wonderful 👏 yes I got it on the 4th of November and am just starting to feel human again...It kicked my butt pretty good, but I think I got it, was getting better and when I went to the Dr to finally get tested, I think I got another strain maybe... my test was positive for covid, sars...I don't know, but I know I am grateful to finally be feeling better and can't wait to get back to work, I have been out since the 4th and am ready to get back in! so glad u recovered and are better, thanks again for the comments 🙏