Hi lads great stuff as always from both of u i currently play 2017 d type m2 as a slicer of the ball it would be advised to go up loft to.try help cut that out is that correct loving the videos keep up.the fantastic work
Yes and with the right shaft with a lower torque and firmer tip section we will be able to stabilize the head from turning over. The trick with M4 will be to pick the correct playing loft and then open the head with the hosel to reduce the low left shots. Twist face will also possibly help with this. See you soon and hope that helps? D
but if you say you higher the loft to prevent a slice = closing the face +2, this will obviously add 2 degrees loft which will loose you distance in general but hit a straighter ball path?
I have Taylor M4 Type D driver with 10.5 loft and 55 gram R White shaft. I have tried many setting but can not hit the ball high enough and tend to have extreme hooks. Very inconsistent. My old driver is more consistent and straighter. It is nor a type d draw basis. I may have made a bad purchase. Is there a way I can set this driver for higher ball flight and less draw?
Hi guys, Just got a set of p790s off ye and they are amazing. Anyway what are the stock shafts available this year with the m4? Are they an improvement on the m2 stock? Thinking of coming for another fitting with ye. Thanks Liam
Ron, twist face only really works if your slice hits it deep in the heel or high off the toe. The D-Type set to Higher hosel will help control the slice shot best. We’ve a best 3 adjustable drivers and the best way to set them up video dropping in a few weeks so look out for that one. That’s the info you need. 👍🏻
You say they must have rearranged the wieght inside the club that we can't see .. Here's an idea how about cutting one open so we can actually see what they've done rather than guess what they've done..
That cleared up allot of questions for me. Good job lads.
Nicely done - nice way to explain how the new face works.
Thanks Peggy
Hi lads great stuff as always from both of u i currently play 2017 d type m2 as a slicer of the ball it would be advised to go up loft to.try help cut that out is that correct loving the videos keep up.the fantastic work
Hey Derek, yes go to higher or the UPR setting to change the face angle to more closed
Enjoyed that - thank you!
Top man great info with passion keep it going ,don't forget the fitter
Always interesting
Cheers
Thanks u 2 blokes
Great video.....keep up the great work 👍
Hi Derek, going to go for a fitting with ye, I have a g400max and prone to hook shot, would you recommend m4? Low handicapper.
Yes and with the right shaft with a lower torque and firmer tip section we will be able to stabilize the head from turning over. The trick with M4 will be to pick the correct playing loft and then open the head with the hosel to reduce the low left shots. Twist face will also possibly help with this. See you soon and hope that helps? D
but if you say you higher the loft to prevent a slice = closing the face +2, this will obviously add 2 degrees loft which will loose you distance in general but hit a straighter ball path?
@ForeGolf Custom
It doesn’t make the loft that high. Misconception, the face closes in higher setting. 👍🏻
@@foregolfcustom okay cheers for responding,
I have Taylor M4 Type D driver with 10.5 loft and 55 gram R White shaft. I have tried many setting but can not hit the ball high enough and tend to have extreme hooks. Very inconsistent. My old driver is more consistent and straighter. It is nor a type d draw basis. I may have made a bad purchase. Is there a way I can set this driver for higher ball flight and less draw?
Afraid not Charles. The higher the flight setting the more draw it is. Back to the drawing board I’m afraid 😦
Hi guys,
Just got a set of p790s off ye and they are amazing. Anyway what are the stock shafts available this year with the m4? Are they an improvement on the m2 stock?
Thinking of coming for another fitting with ye.
Thanks
Liam
Hey Liam, M4 irons or woods?
ForeGolf Custom The m4 driver...and ill also be looking at a hybrid. Thanks
Does the twisty face seem to give it an offset effect for those dang slicers that I'm asking for? 😎
Ron, twist face only really works if your slice hits it deep in the heel or high off the toe. The D-Type set to Higher hosel will help control the slice shot best. We’ve a best 3 adjustable drivers and the best way to set them up video dropping in a few weeks so look out for that one. That’s the info you need. 👍🏻
@@foregolfcustom subscribed, my slicer friend will be quite happy, thank you
You say they must have rearranged the wieght inside the club that we can't see ..
Here's an idea how about cutting one open so we can actually see what they've done rather than guess what they've done..
Great idea Rodney. We've arranged that for some of the future reviews. Thanks.
I'm really looking forward to seeing this review.
Thank you guys..
Still no clue what M4 and M4D difference is...
M4 is more neutral and M4D stands for Draw so more closed in the face. Hope that helps
New subscribers here from japan welcome me sir!
👍🏻🇮🇪
K
I hate Golf.