How & Why: Installing Hot & Cold Side Intercooler Hoses (Pipes) || Mazda BT-50 / Ford Ranger
HTML-код
- Опубликовано: 25 июл 2024
- In this video I'll run through how to upgrade your intercooler hoses and pipes in the Mazda BT-50 and Ford Ranger. The cold side intercooler pipe is a common fault with these cars, but there are other benefits to upgrading the intercooler pipes as well, like less expansion under boost.
The job can be done in less than an hour, see how to do it and why these Plazmaman pipes are better than the OEM offerings.
|| Plazmaman hot side and cold side pipes ||
geni.us/tbt-plazmaman-hot-cold
⋄⋄⋄ TOOLS & EQUIPMENT ⋄⋄⋄
▻ Socket & spanner set: geni.us/bahco-S106-socket-set
=== GEAR I USE TO FILM AND EDIT ===
-- CAMERAS & LENSES --
▻ Camera 1: geni.us/tbt-sony-alpha-a1
▻ Camera 2: geni.us/tbt-sony-a7iv
▻ Wide Angle Prime: geni.us/tbt-sony-24-gm-prime
▻ Nifty Fifty: geni.us/tbt-sony-fe-55mm-f18
▻ Wide Angle Zoom: geni.us/tbt-sony-16to35mm-f4
▻ Drone: geni.us/tbt-dji-mavic-3-flym
▻ Action Camera: geni.us/tbt-gopro-hero-10
▻ 360° Camera: geni.us/tbt-insta360-one-x
▻ Telephoto Lens: geni.us/tbt-sony-70to300
-- AUDIO --
▻ Wireless Recorder: geni.us/tbt-rode-wireless-go-2
▻ Sound Recorder: geni.us/tbt-zoom-h1n
▻ Shotgun Mic (studio): geni.us/tbt-rode-videomic-ntg
▻ Shotgun Mic (travel): geni.us/tbt-sony-ecm-b1m
▻ Headphones: geni.us/tbt-sony-wh1000xm3
▻ Lavalier Microphone: geni.us/tbt-rode-lavalier-go
▻ GoPro Mic: geni.us/tbt-hero10-media-mod
-- EDITING --
▻ Laptop: geni.us/tbt-macbookpro-m1max
▻ Monitor 1: geni.us/tbt-dell-u2720q
▻ Monitor 2: geni.us/tbt-benq-ew3270u
▻ Mouse: geni.us/tbt-logitech-mxmaster3
▻ Keyboard: geni.us/tbt-logitech-mx-keys
▻ Trackpad: geni.us/tbt-magic-trackpad
▻ Portable SSD: geni.us/tbt-sandisk-2tb-ssd
▻ USB-C Hub: geni.us/tbt-satechi-usbc-hub
▻ SD Card Reader: geni.us/tbt-satechi-cardreader
-- LIGHTING --
▻ Key Light: geni.us/tbt-aputure-p60c
▻ Fill Light: geni.us/tbt-neewer-660led
▻ Travel Light: geni.us/tbt-aputure-mc
▻ C-Stand: geni.us/tbt-neewer-c-stand
▻ GoPro Light: geni.us/tbt-gopro-light-mod
-- ACCESSORIES & MOUNTS --
▻ Camera Bag 1: geni.us/tbt-shimoda-action-x50
▻ Camera Bag 2: geni.us/tbt-shimoda-explore-35
▻ Gimbal: geni.us/tbt-zhiyun-weebill-s
▻ Drone Controller: geni.us/tbt-dji-rc-pro
▻ Tripod (Travel): geni.us/tbt-3lt-brian-tripod
▻ Tripod (Studio): geni.us/tbt-tripod-kfconcept
▻ Tech Pouch: geni.us/tbt-tech-pouch
▻ Colour Checker: geni.us/tbt-xritepassportvideo
▻ SD Card Case: geni.us/tbt-memorycard-case
▻ Camera Sling: geni.us/tbt-sling-peakdesign
▻ Accessory Pouch: geni.us/tbt-shimoda-accessory
▻ ND Filters: geni.us/tbt-freewell-nd-magnet
▻ GoPro Dive Case: geni.us/tbt-gopro-dive-housing
▻ GoPro Suction: geni.us/gopro-suction-mount
▻ GoPro Magnetic Clip: geni.us/tbt-gopro-swivelmagnet
▻ GoPro Dive Filter: geni.us/tbt-gopro-dive-filters
▻ GoPro Mouth Mount: geni.us/tbt-gopole-chomps
=== TABLE OF CONTENTS ===
00:00 - What this video covers.
00:35 - Why I am changing both the cold and hot side hoses.
00:55 - Benefits of aftermarket hoses.
02:03 - Why the Plazmaman hot side pipe is a big improvement.
02:20 - Why I chose silicone hose and not a hard pipe.
03:03 - Plazmaman cold side intercooler pipe.
03:42 - Cold side intercooler pipe replacement.
04:00 - Comparing OEM cold side intercooler hose against Plazmaman.
05:06 - Plazmaman hot side intercooler pipe.
06:15 - Removing the OEM hot side intercooler pipe Mazda BT50, Ford Ranger.
07:47 - Comparing OEM hot side intercooler hose against Plazmaman.
08:37 - Installation thoughts.
09:25 - Weight savings & costs.
09:45 - Mazda BT-50 build costs & weights.
|| ALSO ACTIVE ON ||
◦ Website: thebrownetown.com
◦ Instagram: / thebrownetown
|| FOR THOSE WHO CHOOSE TO DONATE ||
▻ paypal.me/TheBrowneTown
**Disclosure
Links are affiliate links. Through partnerships with Amazon, eBay and others I earn a small commission from purchases made through these links. There are no extra costs for you but it does help support the channel in a small way. 
Хобби
Cheers, mate. I really appreciated this video.
I found that the hard section of the hot side came out easy. If I took it to the front of the vehicle and turned it towards the passenger side, it just dropped out.
Thanks again.
No dramas, yep mine took a bit of force but definitely doable for everyone with the right maneuvering.
Your video was helpful in that it gave me some insight before tackling the job first time. But I replaced all hoses from the top I didn`t remove the bash plate. I removed the airbox from the engine bay which opened field of sight and gave easy access to the bolt holding the hard pipe and the clamps on the turbo. The hard pipe came out without any problem. With the airbox out doing the hot side hoses was as easy as the cold side hose. I also replaces the hose from airbox to turbo. I bought 3 SAAS silicone hoses on ebay for under $300
Yes this method is recommended from memory but for me it would have meant the snorkel connection falling into the wheel well, which means having to take all of that off to refit the snorkel.
Plenty of ways to skin a cat 😺
Love your work, keep it up
Cheers mate.
love your work man - keep it up. The high quality editing, its clear and easy to follow - great to see and keep growing the channel!
Thanks mate. Will try to grow it but since I don't just do 4wd stuff it will stunt the growth.
One day I might create different channels for different topics but cbf just yet.
@@TheBrowneTown its all good mate, i do a bit of 4WD and camping, my channel is NATV4X4
Cheers mate, you're video gave me the inspiration, I also undid the airbox and replaced the intake pipe as well with SAAS part no. SSH2301, removed the OEM intake and got access to the hot side pipe. Was pretty easy once the drivers rubber flap was lifted in the wheel arch, used a 10mm on a wobbly extension to remove the bolt, and 7or 8mm on wobbly to remove the clamp on turbo and then lifted the whole hotside assembly out whole, from the top and just bending the u shape in. Nice induction noise now aand throttle responnse seems better, did you notice any other benefits? Thanks for video.
Hey mate, can't say I noticed any differences with this specifically because I did this, the throttle body clean and the exhaust all at the same time basically. So it felt better but I'd guess it was mostly the exhaust that changed the feel of the car.
All 3 jobs related though in a way as they're all air flow improvements.
G’day mate
Have a 2016 PX 2 Ranger
Just did the cold side/EGR clean/pipes etc.
wasn’t too bad as I’ve run a catch can since new.
Plazmaman hoses are the best for this job
Now for the hot side 😢
Or 🍺
Love ya work 👍🇦🇺
Thanks mate, hot side is a bit of a pain to get out but it just requires some force and playing with the angles.
Pretty easy the hot side just take the intake off and turn the wheel to get access to the wheel well !
Can you give a more detailed explanation of how you removed the hard pipe from the engine bay after disconnecting it? I’m not having any luck taking it out
I can't remember exactly but you need to separate every single piece. It won't come out without touching things, as in there's no special way to twist it where it comes out.
It was basically done through force at the angle I thought had the least amount needed to clear the spot that was hitting the chassis etc.
@@TheBrowneTown do you remember if it came out from underneath or from the top of the engine bay?
Definitely from underneath the car.
It was a long time ago now but I was under the car, bent it a few ways and in one way it was hitting something but I was able to force it out past the blockage.
Are the hose on the hot side touching the power steering fluid hose ?
There's at least a finger width between them, maybe a touch more.
@@TheBrowneTown Thanks bro, I have old PX2 almost hit 200K km just need a few bit a piece to be replace. How about intercooler it self did yours have been upgraded?
Haven't changed the intercooler at this stage. Not sure if I will or not, got the oil cooler on the front for transmission oil so not sure if they'll clash.
Maybe one day though.
Now to update you exhaust system from 2.5” to 3” for better airflow
Done it haha 👍
I am looking 1 and how much ,where can I find this
I think there's links in the description.