WE BOUGHT A FORD RANGER 3.2 WITH CATASTROPHIC ENGINE FAILURE
HTML-код
- Опубликовано: 23 апр 2024
- We have bought a 2017 Ford Ranger wildtrack that has suffered a catastrophic engine fail#fail #repairing #project #rebuilding #repair #rebuild #engine
If you have a damaged car for sale that you think we might be interested in please email us and don't forget to include a contact number and price if you have one :- salessruk@gmail.com
USE CODE :- SR20 for 20% discount on your Car Vertical Check www.carvertical.com/gb/landin...
a=Rebuilds&b=38b26e3a&voucher=sr20
Instagram For daily sneak peeks :-
salvagerebu...
Instagram for Chris and what he gets up to away from the channel / salvagerebuildschris
For all sponsorship, Business /media enquiries please email :- rebuildssalvage@gmail.com
Please note Rob and Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number.
Working at our fully equipped workshop we purchase #wrecked #salvage vehicles and produce 2 videos a week showing us #repairing and #rebuilding them.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , #crash , #salvage , #wrecked , Will it run , Will it Start , , #Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , NON Running , Banger ,Flood damage , insurance write off , #copart , electrical fault , #crash , Unfinished #project and anything else that arrives
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Lambo , Land Rover , MG , MGF , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover ,Bentley , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Lamborghini , Gallardo , LP 570-4 , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #robandchris - Авто/Мото
Catastrophic engine problems on a modern Ford, what a surprise 😂
Crazy too think there was time when ford had the most reliable engines ever made
@@patrickodowd8883 the old banana d.i 2.5 went foreverrr
@@yorkshireman7025 thats what i was thinking mate ive a had a fair few of them never a problem
@patrickodowd8883 Their zetec engines from early 2000s were great.
Give the pinto some love too!
100 years of making engines and cars and they can only make them to last 90,000 miles, Good job Ford!
I worked on this series of Rangers when they were new.
They were very reliable apart from failed injectors, leaky rear mains, blown turbos, failed intercoolers, failed dpfs, rear axles noisy, oil consumption, ABS module failure, unannounced catastrophic engine failures, Other than that a great truck all round.😂
This also is my experience.
Maybe not a great truck after the long list you put here
@@sicelolongo2388 tumbleweed lol
Good to look at and sit in , but don’t drive ‘‘em too far…😂
The joke at the end … I nearly fell off my chair, the missus thought I had lost the plot 😂😂😂
Important thing about engines and comedy
Timing 😂
Diagnosis in seconds, plan in minutes, and carried out to perfection in an hour!! Top work and great video content guys 👍🤜🤛
That joke rob just gold can we have one after every video this channel is pure gold 🥇🥇🥇🥇🥇🥇
That engine hoist deserves a bit of love... a nice clean and a nice coat of paint... it looks sad at the moment!
SERVES YOU RIGHT FOR BUYING FORD
Engine Hoists: A device used by mechanics all over the world to test the tensile strength of anything they forgot to disconnect :)
I just love seeing Chris’s personality coming through he’s much more relaxed on camera now and really interacts with us viewers, another great post guys looking forward to seeing you work on a truck again 👍
I found your channel a few months back now, so glad I did. Couple of top blokes doing quality work being open & honest about the ups & downs, ultimately sharing great content. Thank you.
Its worrying that it happened to a well maintained car. Whats to say the next engine wont do the same. Great content guys.
It may sound creepy but I watch and enjoy every one of the videos. it is the closest I get to the real world. Thank you both of you :)
Guys why don’t you have some branded vehicle covers made for stuff you don’t want us to see in the background when filming. You could also use them to do “big reveals” or something like that.
Obviously you can also sell them as well. Just a thought.
These are really popular here in Australia. They are famous for being unreliable too
"I'm not coming out at the mo as I'm having a little cry"😂😂
Chris the magpie, half listening to Rob while looking for loose change 😂😂
The above comment reminded me of Music Magpie.
8:33 love Chris's face when he says 'That's a big 'ole in that' 😄
Never seen an Engine with a double porthole like that.great Video Lads.
A bad advert for Ford. 100k looks like a well maintained engine and it's scrap? Pityful.
Funny how that engine in a volvo will do eleventy squillion miles, but put it in a ford and.......Boom! 😂
That ain't a Volvo engine.
That's shocking for that mileage!
That 3.2 engine has a plastic variable vane oil pump that’s prone to self destructing… There’s a modified pump kit available online now..
Not that it matters because it is knackered, but the engine is not made by or based on Volvo. It's a PUMA duratorq variant and really based on a Ford native design.
Made that look easy lads, I heard it was the earlier ones of these these that had the engine fault, we had a couple of early transits 17plates had similar issue
3.2 ranger POS. Super hard to work on. EGR cooler replacement institute barstard of job. Oil pump chain breaker . Pig all round. Every time I see one on the road I cringe for the owner. Thanks for sharing. Following from Sydney Australia.
Just remember not to leave it to drain when changing your oil. Dump the oil, refit the drain plug, and refill.
You've got about 15 minutes to refill it with oil otherwise the oil pump loses prime.
Very common here in Australia as well. Known as Danger Ranger.
Great joke at the End Rob .Even had Chris sounding puzzled
I had a 4yr old mk3 Cortina for 9 years, replaced brakes, sills, suspension, clutch, camshaft twice, rust galore repairs & full paint job & more, & it still only lasted another 12 months after I sold it. Put me off Fords for life - they were rubbish and would not let my family touch one ever since. Enjoyed your video, good fun to watch.👍
Smaller ford engines are total garbage. This catastrophic damage at 100K miles - that’s just the break in period for a Toyota. Outstanding content!
Not the latest ones. They’re a bag of trouble too.
@@hughM9 - in my defense, my “newest” car is 11 years old.
It's not small really 3,2
@@leedstownthe OP is in America and Ford has the 6.7 litre Powerstroke there.
@@RWL2012 I guessed he was from America
I've just repaired one exactly the same, same engine, egr cooler failed and destroyed the entire engine, the 3.2 isn't a good engine and very expensive to replace, good luck guys👍
These are notorious for problems here in Australia.motors/gearboxes.my neighbours one caught fire.
Rob & Chris, I nearly choked when you told that joke at the end!!!! OMG RLMAO
Definitely the funniest gag so far Rob 🤣🤣🤣
After an oil change, and leaving it a few hours without refilling with oil, oil pump is controlled by computer, then have to take sump off and reprogram as thinks it is out of oil.
Chris and rob excellent content and the joke at end was brilliant still a long way to beat chris on toilet 🚽😂😂.
Everyone's happy until auntie con and uncle rod comes along knocking 😅
Australian mechanic here who work on a lot of these. Known issues with these engines. Call main dealer, as you’ll be surprised how affordable a complete new engine is.
If you go with a used engine, consider putting in upgraded oil pump.
Also very important procedure for changing oil and filter with these, if you leave it more then 5 minutes with no oil, it won’t get oil pressure.
Love the channel, long time subscriber
Get it back to Ford for a free engine replacement! This is a known catastrophic failure that's been happening to the 3.2 engine since they were new.
Catastrophic engine fail is perfectly usual on a Ranger.
At least guys, it went out with a bang! In the US Ford Explorers are nicknamed Exploders... a friend of mine in Arizona is on his third engine now and he says " the clock is ticking".
After one cup of coffee, that urned from an engine into the biggest doorstop I've ever seen!! I feel for the guy, that's a beautful, well maintained truck, it seems nowadays that modern engines are a lottery with Ecobooms, wet belts, timing chains stretching etc.
Built to a budget set by bean counters. Engineers don’t get a look in these days. The manufacturers want us to scrap cars and buy another - sad fact of life! 😡
thee old conrod has come out for some fresh air nice one
Loved that video boys. I'm always impressed with your confidence on where all the components go on the rebuild. Best wishes, Mike. Marlborough.
I love how you two work so well together
My boss has a 62plate ford Ranger standing idle with engine problems,nice little project for someone
Brilliant joke and perfect delivery!!
Loved the ending😂😂. More than anything the camaraderie between you comes through so well on your videos. Thanks so much- I really enjoy your content 👏🏻👏🏻
My word you did a great job with that! I am so impressed with the methodical progress and lack drama. This was clearly a well maintained vehicle and for the engine to fail so dramatically at such low mileage there must be an underlying problem. Keep up the good work!!
Really good video guys, really engrossing and absorbing didn’t want it to end really
Good job rob and Chris. 👍👍👍
Oh dear god, I can't believe you came out with that at the end - absolutely seamless! I perked my ears up to hear the rest of the story, as I own a dog myself..... didn't think I would be snorting tea out of my nose two seconds later with that bloody punchline!!!! 🤣🤣🤣
Heavy right foot caused that damage,impressed with Chris,s neatness, and steadiness makes a troublesome job far easier
Another Ecoboom engine doing its thing! Great vid guys, can see “hello” being another t-shirt slogan
Great video really enjoyed. If bellhousing bolts were such a nightmare did you not consider removing engine and gearbox as a complete unti and then split on shopfloor?
🤣🤣🤣 Chris’s reaction at the end man, can imagine his face
Just love you two I love how nothing stresses you both out especially Chris he’s so laid-back love the banter you have between each other great content lads thank you 😊😊😊😊
Typical ford 😮 . Great video guys love the content 👌. Hi from Australia 🇦🇺 . Rangers are very popular here , after seeing this l will not be buying one . Only fix would be put a toyota engine in it 😂.
Buy a vw amarok with a 4 cilinder. Those are oldschool vw diesels the bigblock is a landrover lump.
When you find the new engine please put a geared oil pump in instead of the stupid vain one that’s in from factory and the new engine won’t go bang when it’s serviced incorrectly
Its a shame Eric from IDoCars is in the states as that engine would make for a good teardown video. Loved Chris' reaction to the joke at the end😁. All the best chaps!
A great video! - I really don’t know how you guys do it…. You like surgeons with a car! Such good friendship which is good to see.
Fords' are great to drive when they are working
We need more jokes like that . Ace .😅😂
Perhaps the apprentice took it for a run what you brung at Santa Pod the day before. Needless to say, I thoroughly enjoyed this.
wow that's a lovely truck shame about the engine but it won't be long till you have it back on the road and up for sale and can't wait to see what's next on the channel keep them coming guys 👍👍👍💯💯💯
Ford make nice looking cars, but i'm not brave enough to buy one.
Found a crack? Are you sure he didn’t say ‘found a crank’? lol
Nice work chaps. Rob, always amazed at how you keep your trainers pristine white when working! Look forward to next part.
I'm not coming out, 'cause I'm having a little cry..... comedy gold!!🤣😂🤣
That was the best video you too have done really entertaining keep it boys brilliant 🎉
Wow that’s shocking - loving the dad jokes Rob 😂 How come Chris calls you Johnny ?
That "DIY" engine hoist is worth it's weight in gold. Perhaps a school bus yellow paint job for it. Narragansett Bay
I see the wildtrack stickers are missing on the bin.
Love my rangers
Love the joke at the end 🤣🤣🤣
My 3.2 has done 390k absolutely no problems runs sweet as a nut. The reason they die mostly is people try to change the oil themselves. These have a complex oil system and if you get one make sure it has a full service history by Ford as they have the machinery to change the oil. If you get a airlock in the lubricant system you are knackered.
The main issue is oil change must be completed in 15 min and car restarted immediately so not to lose the prime on the oil pump.
Interesting, never heard of that before.
Nice! It would be nice to get an idea of why it let go but as you say, but of faff stripping it down. Liked the joke at the end, and especially Chris' reaction 😂
"We've thrown a rod."
"Is that serious?"
"Yep."
(with apologies to the Blues Brothers). Really enjoyed this video, I suspect you didn't enjoy the rain though... and great timing with the joke!
It’s well documented of the vane oil pump failure and egr problems guys
I was thinking of getting a Ford Ranger and wanted the 3.2 rather than the smaller engine. I’m not sure if I still want a Ranger now 😬
Great content lads ,always something enjoyable and instructive to watch on this channel .
Great vid again guys, you two seem like the perfect duo to be with on a lads night out or 'jolly boys outing' lol, loving all the humour and banter this is my favourite channel
I was about to get a 2015 Ford Ranger along with my 2008 Hilux here in Norway.
But then I noticed a used engine is £5000 at the scrap yard for a Ranger and only £1000 for a Hilux so I thought nope!
Can you put a hilux engine in the ranger?
Putting a hilux engine in a ranger would be like putting a F1 engine in a lada 😂😂😂😂
@@jamie123bThat’s a rather Naive comment. Different mounting points , engine mounts, engine dimensions.
@@paulsz6194 I’ve never taken an engine in or out you see
@jamie123b believe it or not, it has been done. Anything is possible with some ingenuity.
Same engine has a 10 minute time limit to refill the sump when servicing otherwise it loses its prime of the oil system and that's a whole nother problem 👎
Same regarding the BT-50’s with the same motor. Drop the oil but don’t let it drain fully out & get fresh oil in there ASAP.....what a dumb design 🤔🤦🏼♂️
That ending - priceless!
Come on guys hit that subscribe button! This channel is the sort of channel where you will want to watch more and more videos, and Rob and Chris are top guys.
Love the joke at the end...😂
Another quality engine in the Grenade range of power plants from Ford. Fix Or Repair Daily
Put 280 ,000km on mine not an issue, yet🤞
Threw a Conrad through the block in my first car, spectacular!
Great work as ever fellas. Thank you.
Before you put the new engine in probably advisable to change the oil pump for a geared one, the vaine type disintegrate for fun, make it more attractive to buyers.
Ford seem to have a few vehicles that have major issues with the engines
That was a brilliant video - absolutely amazing. Total respect to you both, credit where it’s due! 😊
Good luck to you guys. You make hard work look easy but years of practice and a strategic plan pays dividends. Another great video and I look forward to the rest of this project! 😊
Change the oil pump to the new kind .
Can we paint the hoist please ?
Great video, I love the working relationship you guys have going to work must be a real pleasure 😊
Brilliant video. Enjoy a time lapse, but nice change to watch you both work in real-time 👍
Only have the vehicles for the life of the manufacturers warranty and follow their service schedules..