You are one of the best restoration/modification channels I know of. And this video is no exception. I like your love to detail, and the results are amazing. One little tip: Please show the running tool in real time, rather than time lapse. I'm sure it is fast enough at normal video speed anyway :) Great work, I always enjoy watching your videos!
Great Job Sir. Came out great. Looks really good, and seemed to work great! I have to say, your recent attempts are getting better all the time. That Planer, converted to 18v, looked very very legit. It had great power, seemed to run excellent. I doubt battery life is real long, but I would gladly trade that for a full power tool.... Well done Sir.
It was a great wireless transformation, congrats! But, honestly I was expecting for restoration of exterior plastic parts like a little sanding, smoothing and re-painting (or maybe a little polishing)... How it looks is important too, you know :)
I always wondered what the BLDC motors for drills ECT. looked like and now that I've seen one I wonder if I could use one as a small generator. That's very interesting I'll have to buy a drill with one of these motors to see if it can be used for that.
Always a pleasure to see your work. By the way, can you tell me how to make a stickers nameplate? Do you create them in Excel or Word, and Is the paper a label sheet with stickers?
4:52 Why this motor controller is not suitable for this project ? PS : you should put more explanation during the video, sometime it's confusing ;) PS2 : but thank you for your nice job, anyway :)
This motor controller is used for a drill, the power switch have 6 wires, while the circular saw controller has only 2 wires for power switch. It is able to operate with the original switch.
Amazing .Why .Because your videos have solutions your videos have quality camera views also have not 30 second video of a screw or motors .Like Earth documantary program of BBC lol
Hi! I didn't undertand how did you convert to cordless.... Battery has lower current and voltage. I'm not a specialist in eletronic. Can you create a tutorial showing how to convert any tool from cord to cordless? I know it requires some calculations and measurements to keep the power of the tool. 🖖🖖🖖
Pense que ibas a revobinar el motor y sales que poniendo un motor sin escobillas por menos hubiera rebobinado el motor 36v por que para los que no tiene pra comprar iun motor sin escobillas esperabamos que modificaras a otro voltaje no que sustituyeras
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
You are one of the best restoration/modification channels I know of. And this video is no exception. I like your love to detail, and the results are amazing. One little tip: Please show the running tool in real time, rather than time lapse. I'm sure it is fast enough at normal video speed anyway :) Great work, I always enjoy watching your videos!
Okay, thank you for letting me know. I'm so glad you love it.
The way you transform from cord to cordless is amazing. Your channel is one of best restoration channels in youtube I ever seen. Well done, bro!!
Wow, thank you! I'm so glad to hear that.
I agree, I have been wondering how you might convert a Graco Truecoat 360 corded paint sprayer to a 20v cordless.
This was excellent. You really went all out. Love the result. 🥰🥰🥰
Thank you so much 🤗
@@gear_show
condition like in this video after how long it has been used
you became a master in converting to dc operated machines 💯
Wow, thank you sir!
Great Job Sir. Came out great.
Looks really good, and seemed to work great!
I have to say, your recent attempts are getting better all the time. That Planer, converted to 18v, looked very very legit. It had great power, seemed to run excellent.
I doubt battery life is real long, but I would gladly trade that for a full power tool....
Well done Sir.
Thank you so much, sir!
I'm so glad that you're always watching my video and sharing your value comment here.
Great job my friend. Good idea.
Many many thanks, MR. NCV
喜歡看你這樣簡單粗暴的改裝跟翻修！
Nice work, you have some kind of natural skill for this things.
Thank you very much!
Thank you, I always look forward to seeing you. I hope that you will open a school in the world of transformation
You're welcome! I hope so, thank you so much!
Really very nice modification! Well done.
Thank you again!
Using the original shaft in the new rotor was a great idea. This should work well in the future. Much better than trying to join two shafts.
Yes, you're right, thank you for sharing!
@@gear_show
is this machine still in use?
Conversion was really challenging
Thanks
شكرا لك دائما انتظر فيوهاتك بفارغ الصبر مشاهدتي لك ممتعه اتمنى ان تفتح مدرسه في عالم التحوير
هنا يمكنك التعلم وطرح أي سؤال.
Nice work again my Friend👏🤝
Thank you! Cheers!
Лайк за демонстрацію можливості переробки.
Very good restoration 👍👍👍Thanks for sharing. Be safe🇨🇦
You're welcome, thank you so much!
Great job, thank you brother. You are so talented
You're welcome! Thank you so much!
@@gear_show
what is the total repair cost ?
Молодец! Ну, что тут скажешь? Молодец! Руки от туда, от куда надо растут. 👍🏻😃
Большое спасибо! Я рада что тебе нравиться.
Absolutely mind blowing work your are very genius thanks for sharing this wonderful idea.
Thank you so much 😊 I'm glade this video helps you.
Fantastic retro with modern electronics..
Many thanks!
The inherent quality of the Makita tool shines threw.
I hope the quality is like that, thank you!
Creativity is excellent.
Wonderful video.
Thank you very much
Ur video always the best of the best can’t wait for ur next coming video Mr gear show ..
anyway sending love ❤️
Thank you so much 😀 I'm so glad that you love all my videos ❤️
It was a great wireless transformation, congrats! But, honestly I was expecting for restoration of exterior plastic parts like a little sanding, smoothing and re-painting (or maybe a little polishing)... How it looks is important too, you know :)
Okay, because I want the video to be shorter, I cut all that parts away. Anyway, thank you for letting me know!
It's perfect for me like it is
I think you will have a good way in future to put the motor into the machine
Yes, I hope so, thank you!
Комментарий в поддержку канала и ролика, а также труда мастера.
Благодарю вас!
I love this channel because it helps me to understand how a lot of my woodworking tools are built and how they work. Cool!
A Perfect Choice For Power Tools That Runs 100-120 Volts A.C So It Will Be Used In Countries That Uses 230-240 Volts A.C
Sure it is, thank you!
Fantastic conversion 😁👍
Thanks again!
Amazing
Thanks
Very nice
Thanks
Nice and clean work good job
Yes, thank you
It's amazing I want to try it too.
Looks good to me
Thank you again
I love the conversion😃
Thank you!
Nice👍 good job 💯💯💯💯💯 brother
Thanks for the visit
Awesome bro
Thanks 🤗
👍👍👍👍👍👍👍👍😘😘
Thank you for a lot of thumbs up!
I always wondered what the BLDC motors for drills ECT. looked like and now that I've seen one I wonder if I could use one as a small generator. That's very interesting I'll have to buy a drill with one of these motors to see if it can be used for that.
I have one question why the originals companies not do this is first place when all the technology is there. Great work however really liked it.
Very impressive!
Thank you!
nice 👍🏻
Thanks ✌️
@@gear_show I like the Motor you use 👍🏻
Always a pleasure to see your work.
By the way, can you tell me how to make a stickers nameplate?
Do you create them in Excel or Word, and Is the paper a label sheet with stickers?
I'm glad you like this video, I made a sticker nameplate by Adobe Photoshop.
@@gear_show Thank you for your reply, sir.
I will try it.
Amazing bro
Thanks 🔥
Sangat suka sekali aku
Thank you!
@@gear_show video berikuty grinda Cordless lgi donk..
Good 👍
Thanks
Great and awesome. Good job.
Thank you so much 😀
Using metal is always better than using plastic.
Sure it is.
harmful effects of electric current Foucault , you must insulate between the washer and stato
Bravo!
Thanks
Oh my god you should show your 3d printer work 😣😣😣😣😣😣
Okay, next time, thank you for let me know you like this part.
Chique show 👍👍
Thanks
that's insane lol great work
Thank you! Cheers!
Great job
Thanks
8000 JPY is about 60 USD...still not bad to have that shaft turned.
❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Hey GearShow, how did you learn to do all these things?
💜💜💜💜
💜💜💜💜💜💜💜💜
4:52 Why this motor controller is not suitable for this project ?
PS : you should put more explanation during the video, sometime it's confusing ;)
PS2 : but thank you for your nice job, anyway :)
This motor controller is used for a drill, the power switch have 6 wires, while the circular saw controller has only 2 wires for power switch. It is able to operate with the original switch.
YESSS!!! Gear Show
Thanks
Tank you
You're welcome
good job sir..i want to ask you something.., what brand of battery u used for..? please tell me... thank you.. 🙏
This is 18V makita battery
@@gear_show ok..thank you.. 👍👍👍
Maybe a high temp 3D printing material/method can solve that 😍
That would be cool! thank you!
When I open motor, i saw some drill hole on. Did you see such kind of thing before? That is factory drill to make it balance?
Awesome
Thanks
good job
Thanks
Gratidão GearShow!
Thank you!
Awesome Great
Thanks
It wouldent be a video without the good old makita screwdriver. When I watch other restoration video I think to myself ha he doesn’t have a makita
This tool helps me to save time, I really need it.
🔥👍
Please come back with the motor rewinds
Anyway great vídeos
Okay, thank you!
Amazing .Why .Because your videos have solutions your videos have quality camera views also have not 30 second video of a screw or motors .Like Earth documantary program of BBC lol
Wow, I'm so glad after seen your comment, thank you so much!
where do you get the brushless motors and controllers
Hi!
I didn't undertand how did you convert to cordless.... Battery has lower current and voltage.
I'm not a specialist in eletronic.
Can you create a tutorial showing how to convert any tool from cord to cordless?
I know it requires some calculations and measurements to keep the power of the tool.
🖖🖖🖖
Good job replacing PLA for metal, i think the PLA can't support the heat that can generate.
Yes, thank you!
Nice
Thanks
I will ask though, have you tried to make a full size vacuum cleaner cordless? With maybe an 18 volt Lithium Battery?
I haven't tried it yet.
Where can I buy such an adapter for the battery pack?
i think you try make lipo battery
No, I don't
Hi what's the model of Makita screwdriver, that You use?
It is 7.2V screwdriver.
Olá faz um vídeo ensinando a fazer uma conversão com motor DC 18v em uma lixadeira por favor.
Great
Thanks
👍👍👍
O my god
👍👍👍 mantap
Thanks!
Четко как всегда..
У меня вопрос,где такой двигатель купить,дайте ссылку?!
Make cleaning tool😃
Ok next time
Camera quality is the best, who uses the camera
I'm the camera man too.
where did u get motor
Keren ⭐⭐⭐⭐⭐👍
Thanks
Sir please provide Buy link in description please of motor and controller🙏🙏🙏🙏🙏🙏🙏🙏
I put the community tab, you can find the links there.
👍👍👍👍👍🙏🙏
Thanks
Meanwhile .You could research to Patreon too.I sure so much people want support to you on Patreon .
I don't know much about it, but I just created it
where didt you buy that motor idid fine that anywere
You can check in Gear Show community tab.
Where I can buy these motor and controller please tell🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
You can check in the description.
What is the name of company of motor and where i can buy it
You can buy it in AliExpress.
🥰🥰🥰🥰👍
🥰🥰🥰🥰
sir,where is your address,I think to remake my planner to,but I cant fine the dinamo
Instead of putting that bldc motor u could rewind the old motor for 18w
Okay, thank you for sharing!
Sir Plz change Table sheet
Okay, I will.
Pense que ibas a revobinar el motor y sales que poniendo un motor sin escobillas por menos hubiera rebobinado el motor 36v por que para los que no tiene pra comprar iun motor sin escobillas esperabamos que modificaras a otro voltaje no que sustituyeras
Está bien, lo mantendré simple la próxima vez.