@@gear_show But when the engine is modified, it becomes weaker than it was, so it is preferable not to modify it and make it as it was. There are many repairmen who do not do this for this reason
14:30. When I saw these armature rings, I immediately remembered how we used to throw shaped transformer plates in childhood. They were in the form of the Russian letter "Ш", or "E". 😄
I love this, the voltage convertion was a master piece, It would be nicer a more elaborated adaptation to the battery and a cover for the exposed wires, consider 3d printing 👌
Other than perhaps a bit better cable management from the handle to the battery, you've done an excellent job. I'd have sleeved the wires into one flex, grommeted the hole they emerge from or, indeed, routed them out of the smaller hole @ 28:38 and blanked off the large aperture at the bottom. Still, definitely a 9.5/10.
Thank you for great video bro. 21:20 I need your help. I use RS 775 and its wires broken high voltages. What did use this liquid glue for secure wires? I find a glue, Permabond 920 but is it very expensive.
so scary powertools with full metal expose like that with no rubber coating, and its electric AC to, you bassicaly play with your life using a tools like this, convert it to dc will be safer from electric shock
Q: Do you have to tamper with the motor in order for it to work with a battery, I have added a battery to my corded Strimmer to make it cordless, however, it doesn't give the same power?
Thats a lot of work. I have a drill very similar i found it in a dumpster i dont that i will power it from the mains i think it s dangerous beacause of the metal body maybe i wil something steampunk from it... i have one guestion what that that one cluch do?
@@gear_show the drill is designed with 100V so maybe your initial test with 200V+ AC broke it? these vintage makita hammer drills are surprisingly durable and ppl are still using them practically today.
nice but you should not use plastic to "Insulate" the windings.. you should use insulating paper that is designed for it you run the risk of it heating up and melting and sticking causing a short with prolonged use.
Interesting project. But was it worth? I mean, there is really lot of work you did. Anyway when you testing drill on different materials like wood there is no question. When you drill concrete, I see a low performance in this case. And there is not showing drilling metal plates. Good job anyway. Good luck!
The battery can be used with the original power tool, so It can't count into this project cost. I do this project for learning and showing. The vintage mechanic structure is designed not so good, that why it performs not so well. Anyway thank you!
You're supposed to melt that plastic pole. The one that came through nickle plate. It's there to lock the metal in place. I used low temperature solder with old tips.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
It looks like the spot labeled '12v' on the circuit board wasn't soldered down like the rest. You can see it at 3:47
also didnt add a grommet where the power cables go into the (metal) body
always one to pick a fault
People who spot potential problems are much better at their job than those that just sit in awe.
I`m one of your biggest fans! Every video is a masterpiece. Really grateful you`ve inspired me to do a lot of my own projects.
Thank you for away come to this channel! I'm glad you like those contents.
wish i had the patience
This was excellent. You really went all out. Love the result. 🥰🥰🥰
Thank you so much 🤗
Gear Show rewinding the armature, thats more like it. Loved it.
I'm glad you love it, thank you!
@@gear_show
But when the engine is modified, it becomes weaker than it was, so it is preferable not to modify it and make it as it was. There are many repairmen who do not do this for this reason
14:30. When I saw these armature rings, I immediately remembered how we used to throw shaped transformer plates in childhood. They were in the form of the Russian letter "Ш", or "E". 😄
Oh, you have a good childhood memories. Thank you for sharing!
@@gear_show Thank you for amazing work and video montage! 🙂
I love this, the voltage convertion was a master piece, It would be nicer a more elaborated adaptation to the battery and a cover for the exposed wires, consider 3d printing 👌
Okay, thank you for sharing! I'm glad you love this content.
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
My pleasure, thank you!
The proper use for a 50mm socket 😂
NICE BATTERY KIT I LIKE IT A LOT
Thank you!
Да. Хорошая и серьёзная проделана работа. Удачи вам. Ну и конечно лайк
What a wonderful restoration and you are very hard worker thanks for the sharing this video and nice restoration good work sir 👍👍.
I was feeling restless for some reasons this restoration video calm me down
どうもありがとうございました、私はあなたのコンテンツにとても満足しています。
どういたしまして！ あなたがこのコンテンツを生きてくれてとてもうれしいです。
Awesome… very beautiful 👌
Fully watched 👍👍👍👍👍
Thank you so much 😊
Good work, I think adding the left and right direction key is necessary for this work
You are genius to make these kind of things sir❤️❤️❤️
Thank you so much!
very good👍👍
Thank you!
Thanks for change Table sheet Gear show Very Excellent work Brother
My pleasure, I'm glad you like it.
Лови плюс! Я бы оставил 220. Эта серебристая краска быстро сотрётся. Инструмент сделан на века !
Спасибо, что поделились!
I really enjoy your conversions.
Glad you like them!
Wow that amazing job and you have a great experience too
Thank you!
Excellent work with useful tools and techniques.
Щетки у моторчика нужно было поменять на медно-графитовые, с низким сопротивлением, которые расчитаны на большой ток.
Спасибо за контент!
Хорошо, спасибо за советы!
U forgot to solder the 12v signal on the battery module at 3:25 . Nice videos!
Yes, thank you for the feedback!
A masterpiece, in a masterclass, by the master ! Hey dude, you rock !!!!
نبويو ت
Thank you! I'm glad you like it.
Other than perhaps a bit better cable management from the handle to the battery, you've done an excellent job.
I'd have sleeved the wires into one flex, grommeted the hole they emerge from or, indeed, routed them out of the smaller hole @ 28:38 and blanked off the large aperture at the bottom.
Still, definitely a 9.5/10.
I'm so glade with your feedback, thank you for sharing!
Great craftsmenship !
Thank you!
Świetna robota 👏👍😎
Thank you for great video bro. 21:20 I need your help. I use RS 775 and its wires broken high voltages. What did use this liquid glue for secure wires? I find a glue, Permabond 920 but is it very expensive.
It is A&B glue.
Please a Quick-release chuck and a brushless motor
so scary powertools with full metal expose like that with no rubber coating, and its electric AC to, you bassicaly play with your life using a tools like this, convert it to dc will be safer from electric shock
Great job as usual but the motor seems to be not powerful enough for this drill?
Yes, it is less power than original.
Another great video and i like the sound! 👍
nice build
Thanks
Türkiye den selamlar 🇹🇷🇹🇷
Very impressive G.S... Nice video...
Thank you!
Oh man! I love your videos
cool project but idk if its too fit for masonry. hammer drills can do it but its slow compared to a sds rotary hammer
Because the old mechanic structure.
I’m your fan. Excellent job
Thank you my fan :)
Nice job, good content! 👍🏻Thanks! 🌹
Thank you very much!
Great job, thank you brother. You are so talented
I appreciate that!
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Amazing video ❤️
You are so kind ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
THANKS GREAT JOB
You're welcome, thank you!
Q: Do you have to tamper with the motor in order for it to work with a battery, I have added a battery to my corded Strimmer to make it cordless, however, it doesn't give the same power?
Did you change the motor?
@@gear_show no i have not
So i take it motor requires changing for it to work?
What was the blue component marked as z08, a bridge rectifier ?
Which part of the video? Could you please point it
How will you stop the drill for draining the battery cells all the way?
Wow! Your job is amazing.... I need to know... how did you remove the rust and the grease?! that must be difficult
The motor laminations will produce eddy currents because each lamination wasn't isolated electrically with varnish etc. But overall great work!
very good
Thanks
Thats a lot of work. I have a drill very similar i found it in a dumpster i dont that i will power it from the mains i think it s dangerous beacause of the metal body maybe i wil something steampunk from it... i have one guestion what that that one cluch do?
Becarefull with all aluminum tool.
excelentes videos compa bendiciones , sigue asi dando videos chingones , saludo desde martines de la torre ; veracruz , mexico.
Very nice ! ...but one question... How you calculate number of spire?
I follow DC armature 18V
Nice, looks SF, like a fallout experimental weapon :)
Yes, thank you!
Olá, dar pra modificar a bobina de campo também, pra não colocar imãs?
good job... 👍👍👍
Thanks
أحسنت يا مبدع استمر
شكرًا لك! أنا سعيد لأنك أحببته.
allways good thanks
Always welcome
Beautiful job.
Thank you so much 😀
Fantástico trabajo !
Gracias por compartir.
¡Denada gracias!
А сразу нельзя взять готовый аккумулятор??
Это искусство создания видео.
The japan script says it's makita, i guess that's the brand
Okay, thank you for sharing
Well done. 👍
Thank you! 👍
Nice job 👍🇮🇩🙏
Parabéns pelo vídeo. Faz um vídeo explicando com Faz a ligação da bateria 🔋
really beautiful great job thank you
Thank you! 😊
What is the name of the company that made this drill?
Good job
Where can I buy the battery case. the link I can't find yours in the description link does not work
It was really great
Thank you!
Trabalho de mestre! Gratidão Gear Show!
Muito obrigado!
Did you input 100V in the beginning?
What is the current or power of the new motor?
I didn't test with 100V in the beginning, I know the original power by the label.
My multimeter can't measure the current of the new motor.
@@gear_show the drill is designed with 100V so maybe your initial test with 200V+ AC broke it? these vintage makita hammer drills are surprisingly durable and ppl are still using them practically today.
does the additional turns give you more torque or higher voltage range?
Me encanta tu trabajo y conocimiento.....siempre estoy pendiente de tu videos.....gracias
Me alegra que te guste este contenido.
nice but you should not use plastic to "Insulate" the windings.. you should use insulating paper that is designed for it you run the risk of it heating up and melting and sticking causing a short with prolonged use.
Yes, you're right. Thank you so much for sharing!
Все очень круто, но не тонкие ли провода питания от аккумулятора к дрели? Потери в них будут(((
Bravo 🤠🏆🇧🇷🇧🇷👏✍️
Thanks
3:34 3:47 4:32 12V terminal is not soldered to PCB
Interesting project. But was it worth? I mean, there is really lot of work you did. Anyway when you testing drill on different materials like wood there is no question. When you drill concrete, I see a low performance in this case. And there is not showing drilling metal plates. Good job anyway. Good luck!
The battery can be used with the original power tool, so It can't count into this project cost. I do this project for learning and showing. The vintage mechanic structure is designed not so good, that why it performs not so well. Anyway thank you!
Отличная работа! Лайк.
А какой стандарт аккумулятора использован?
18650
@@abracadabra5418 Нет, я имел в виду сборку. Это явно не "Makita".
@@Dingo__69 на али таких сборок валом. они сразу с посадочным гнездом идут.
На милку скорее похоже
Под видео написано же Milwaukee 18V battery
Sir can I upgrade 12v battery to 16v for my china makita drill if any problem or not.
How come never post product links? Where can I get those battery cells?
Nice 😊
Thanks
You're supposed to melt that plastic pole. The one that came through nickle plate. It's there to lock the metal in place.
I used low temperature solder with old tips.
Okay, thank for the tips
Винтажный киберпанк)))
Да спасибо!
Có mô tơ 18v đc sao anh ko thây, mà quấn như vậy thì làm khó em quá.hehe theo dõi anh đã lâu
Mo to 18v loại mạnh nhất là 895 cug ko mạnh bằng mo to quấn lại này nên họ quấn vẫn hơn .
👍👍👍 mantap
Thanks
Have you ever done the math to see how much more powerful your mods have made tools like this one?
When I was studying physics, I knew how to calculate its force.
I would like the rotor winding diagram for this motor please
You can find more detail from the broken motorbike starter
can you restoration for electric die grinder? or mod it into battery
I'm not promise, but I noted what you want. Thank you!
Some math to why you take the winding you do would be very helpful to redo this oneself.
Otherwise great video!
That's a very nice
Thank you!
👍👏 отлично
Nice !
Where do you buy the components?
Лютый колхоз)😄👍
Dope💯
Really..
@@gear_show What do you mean by "Really.." ?
Îmi place foarte mult.
New sub , liked ❤️👍👍🙏✌️
Thanks for the sub
все класно, но только при сборке акумулятора ти забил припаять 12в пин. припаяй пожалуйста
О, хорошо, я проверю это еще раз, спасибо!
Where did you buy battery kit?
I bought it from China.
نسأل الله العظيم ان ينصر اخواننا في فلسطين
Where do you buy lithium-ion batteries?