It's a joy to watch him work, smart, smooth, clean I haven't seen anyone else take the patience and time to attend to the little things like this man does, outstanding!
Those gouges in the armature stack (you can see clearly around 10:55) are done after everything else to balance the motor. To completely rewind the motor and not re-balance it is a mistake. You see at 12:20 he is balancing the motor by adding a bit of hard epoxy to one side.
thank you for making things that actually work. And not making those fake free energy devices using a light bulb and paperclip and car alternator that makes 1.1 Jigawatts of free power.
it will take some time to overtroll the internal combustions engine.... yet i see more and more videos like that one makes me happy.... yet is for cuting trees.. which is bad :D... overall great video thanks!
I want to make this plug-in chainsaw portable: WORX WG303.1 120VAC 14.5 Amp 16" Chainsaw. Can you suggest an off-the-shelf DC motor that could equal or better its current performance?
For the next Project about modded Can you rebuild the Chop Saw with double brushless motor with the same methol that you had done with brushless Planer run at 36v i hope to see
При понижении напряжения возрастают токи а коллектор и щетки остались старые , балансировка на глаз тоже ресурса не добавляет , такой инструмент долго не поработает .
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
@@gear_show Usually when an electric motor stops working it is something small like the brushes are stuck or a wire came loose. That one was really destroyed when you started. I was not saying that you missed something. You did a great job as always. I look forward to your next project.
![Cord to Cordless Circular Saw Conversion 220V to 20V [Rewinding]](http://i.ytimg.com/vi/k-L9mXOpwWA/mqdefault.jpg)
It's a joy to watch him work, smart, smooth, clean I haven't seen anyone else take the patience and time to attend to the little things like this man does, outstanding!
I am very encouraged after seeing your comments, thank you very much!
Gotta appreciate how much hard work this guy puts into every content for us! Thanks!
Every aspect of your videos is high quality. Words can't express how much I am enjoying them. Keep up the good work.
You've given me some insight as to how to tune up some of my old tools. Thanks!
Thanks, but truly I can and do watch your vids for hours. Good Job!
Glad you like them! Thank you for your time!
Seni seviyoruz Kardeşim müthişsin izlerken keyif aldığım ne diyeceğimi bilemedimki takılı kaldım.
Yorumunuzu gördükten sonra çok motive oldum, çok teşekkür ederim!
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, be safe 🇨🇦
Thank you so much!
You are doing a great job, good luck my friend.
Keep going mate . Nice content and restoration ! 👏
This has talent that's truly worth learning! Great job
Those gouges in the armature stack (you can see clearly around 10:55) are done after everything else to balance the motor. To completely rewind the motor and not re-balance it is a mistake.
You see at 12:20 he is balancing the motor by adding a bit of hard epoxy to one side.
I missed the part with balancing and how he figured out its out of balance
Fantastic job nicely installation and restore good work sir keep it up and thank you so much sir.
I'm so happy to hear that, thank you so much!
Amico sei veramente bravo, ottimo lavoro e splendido video, ciao 👍👍👍👍👍👍
Ciao, sono così felice di sentirlo, grazie!
Love watching a useless piece of junk, turned into something of use. Bravo my friend.
I'm glad you like it, thank you!
Great job, thank you brother. You are so talented
You're welcome, thank you!
you got 1 subs.!
thanks for the great content, keep it up 👍
I always enjoy what you do :-)
thank you for making things that actually work. And not making those fake free energy devices using a light bulb and paperclip and car alternator that makes 1.1 Jigawatts of free power.
good restore❤️❤️😘👍
Thank you!
Your work always makes my day, thanks! : ))
Glad to hear that! thank you!
Vc Cada dia tem um projeto melhor que o outro
Obrigada! Estou feliz que você gosta.
Комментарий в поддержку канала и ролика, а также труда мастера.
Благодарю вас! Я так рад это слышать.
мартышкиного труда. аккумуляторы перегреваются моментально в таком режиме работы
@@Artvinch если аккумы высокотоковые то есть с низким сопротивлением то нормально
@@АлексейКурбатов-я7ъ , абсолютно любые при работе в перегрузке сдохнут.
@@Artvinch для этого есть плата бмс .она отключает при сильном разряде
well done there are big tools that need 36 or 40 volts to work properly.
Yes, the next project will be 40 volts
Er7
cool conversion, but im pretty sure that 18v makita chainsaw would get trough wood on end faster... so not worth it.
Wow....like a new chain saw,my friend.....🤔🤔🤩🤩
Yes, thanks
Amazing! Please make eletric to battery grass cutter conversion
Okay, I will find and do it.
Gratidão pelo vídeo 📹 GearShow! Ficou muito 👍
😂ذ
it will take some time to overtroll the internal combustions engine.... yet i see more and more videos like that one makes me happy.... yet is for cuting trees.. which is bad :D... overall great video
thanks!
Okay, I see, thank you for sharing :D
Thanks for sharing
My pleasure
Amazing video 😍❤️😍❤️
Thank you so much 😀❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Ryobi with makita batteries, nice
How do you determine how many Stacks, Communicator Bars, and gauge of wire is needed?
супер👍👍👍👍смотрю и учусь👍👍👍👍
Thank you!
Nice, you did it.. thank you 👍
You're welcome, thank you!
Awesome bro
awesome video as always. how long the battey last until it low?
At 16:24, I thought u was drilling into the battery,I said thats a good way to blow a battery up lol
Ótimo trabalho 👍👍
Muito obrigado!
Good job
AWESOME GREAT JOB THANKS
great yov
Kereeeen kereeen 👍👍👍👍👍👍🙏🙏
maestro🙏
Magnífico que gran trabajo genial
¡Muchas gracias!
Chainsaw - super!!! He did everything perfectly. But a smaller chain (smaller size) is needed. And, yes, you don’t know how to work with a saw.
Thanks for the info!
Wow awesome
Thank you!
Good ii boss 👍👍😊😊😊👍😍😍
Thank you!
This time he at least covered the slits with wooden pieces and didn‘t leavr them open like the last time!
Impact wrench restoration please 😊
I will do it after I found it. Now I don't have it.
What do you do with all these tools? Do you keep them for your own use, or do you sell them?
I want to make this plug-in chainsaw portable: WORX WG303.1 120VAC 14.5 Amp 16" Chainsaw. Can you suggest an off-the-shelf DC motor that could equal or better its current performance?
so cool
For the next Project about modded
Can you rebuild the Chop Saw with double brushless motor with the same methol that you had done with brushless Planer run at 36v i hope to see
This is a great idea, thank you! I will think about it.
Всё-таки, бензиновая цепная пила побыстрее. На электрической стоило больше оборотов в минуту сделать.
Request sir...how to convert hot gun electric to cordless 20v..
Nice
How do you know where to start the windings?
Can you convert a oster blender to cordless using a brushless dc motor.
I like it bro
I'm glad you like it. thank you!
Ok nice 👌🇮🇩🇮🇩🇮🇩
Video berikut bor Cordlessnya upgrade dinamo gearbox 12v menjadi 18v/20v..
Oke, terima kasih atas idenya.
@@gear_show apa semua bor Cordlessnya yg baterai 12v dpasang baterai 18v/20v tanpa ganti dinamo gearboxy bisa ada kendalay
❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Next make a solar system to charge those batteries
Please do about other mechanical devices that do not use lion batteries
Okay, thank you!
what was the fix for the oil pump?
can you done this with a Jack Hammer?
I think it could be done with a jack hammer too.
☺️👍
:D
I like it
Thank you!
An electrical chainsaw is better than the petrol one. It is not needed to start the engine every time you would like to cut off some stuff
Deja el enlace donde cómprate esa baterías
First like!
Thank you!
真棒
Tuyệt vời
Cảm ơn bạn!
При понижении напряжения возрастают токи а коллектор и щетки остались старые , балансировка на глаз тоже ресурса не добавляет , такой инструмент долго не поработает .
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Máy xăng vẫn khỏe hơn, năng lượng dùng cho nó vẫn dễ hơn
That was the worst failure damage I've seen on one of your projects. Missing commutator bars is pretty bad.
Which part are missing?
@@gear_show The commutator was missing bars when you started, but you fixed it. You put a new commutator.
@@gear_show Usually when an electric motor stops working it is something small like the brushes are stuck or a wire came loose. That one was really destroyed when you started. I was not saying that you missed something. You did a great job as always. I look forward to your next project.
Not good balance 😜 but it's anyway good job!
Okay, I will improve it. thank you!
Норм 👍
Thanks
much more video
Okay, I will do.
два запила и аккумуляторы в перегреве
Grazzi tax-xogħol tajjeb kollu mal-kontenut. Żomm ix-xogħol it-tajjeb.
Do you know that Jesus the son of God died on the cross for our sins? Accept him today as your Lord and savior
Для пиления очень низкие обороты
🇪🇨👍
Power is not enough to cut smoothly
Б-баланс .. 100% балансировка якоря и на видео не видно как он на втулке криво сидит и гуляет во время вращения ..
Já foi melhor em .. tá caindo a qualidade
Толково
ранее
Yes..
Could be better but you vision lacks originality and creativity.
Stick to fixing and rebuilding.
Медленное го..ище👎
Good job