I'm very impressed with your commitment to practicality over aesthetics, while still retaining respect for the aesthetics whenever possible. Lovely piece of work!
great job. I only could understand up to 12:00, but after that I didn't understand what magic you're doing with electricity. respect man. love and enjoyed every second of this video. thanks for sharing. liked/subscribed
The Ingersoll Rand 114GQC Air Hammer ruclips.net/user/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
Amazing. Thank you for showing what can be done if you put your mind to something. Enjoyed it thoroughly as always, thank you for you sharing your skills with us.
That was incredible!! That comparison was really surprising although it must be emphasized that You used a 18v to 6Ah battery in the modified drill and in the Makita you used a 16v to 3Ah battery and it is something to be considered by watt's law but fantastic, I loved that modification 👌
Widzę tu jeszcze jeden problem jak zakładasz ten stary wentylator to musisz zdemontować ten na silniku brushless ponieważ one będą działać przeciw sobie tworząc z jednej i drugiej strony podciśnienie w efekcie brak chłodzenia stojana silnika i jego przegrzanie bo potrzebny strumień powietrza i wentylator tylko z jednej strony!
Don't know if it's been said before, but you should add links to where you buy your new parts (like when you make a battery). That way we know where to get parts and you should be able to make a little off of any sale. Great work! Love the videos. I'll be traveling to Japan this summer and look forward to finding some tools to bring back.
That’s the first thing I thought too. The press fit looked tight, but it needed some kind of anchor to ensure it doesn’t eventually start spinning around the shaft.
its truly satisfying video 💯👌🏻👏🏻👏🏻 with your knowledge about power tools, electricity and restorations, i think you can made your own power tools, maybe named "GS a.k.a. GearShow Power Tools" 😁👌🏻👌🏻💪🏻👍🏻👍🏻
That shaft you bored out on a drill press is definitely concentric and not going to fail immediately under stress.
I'm very impressed with your commitment to practicality over aesthetics, while still retaining respect for the aesthetics whenever possible.
Lovely piece of work!
A full restoration! Beautiful as always. Thank you for sharing your talent. An artist at your craft.
You're welcome, I'm glad you like this video.
The Battery supporter adaptation was genius ,really a piece of Art...👌🏻 Love watching your Projects..🌟👍🏻
I'm so glad you like this idea, thank you so much!
great job. I only could understand up to 12:00, but after that I didn't understand what magic you're doing with electricity. respect man. love and enjoyed every second of this video. thanks for sharing.
liked/subscribed
The Ingersoll Rand 114GQC Air Hammer ruclips.net/user/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
Hello mister beautiful restoration professionally restored well done
Hello, thank you!
You out Makita'd Makita! That was impressive!
Yes, it was, thank you
I own the HR2450 230V, so this video was kind of special to me ♥
Nice to hear that, thank you!
Как всегда класс. Приятно смотреть на вашу работу.
Я рад, что это делает тебя счастливым.
Nice work, just a recomendation with the flat irons, you can marked with the grinder and next you twist them, this is more easy, good work.
Okay, thank you!
Amazing. Thank you for showing what can be done if you put your mind to something. Enjoyed it thoroughly as always, thank you for you sharing your skills with us.
I'm glad you like this work, thank you!
@@gear_show This is amazing
It's nice that you explain everything in detail
I love your videos very much
And I try to learn
có thương mại sản phẩm phẩm này không
Much respect for you and for the restorations you do with such skill and skill...may God always protect you🙏🙏♥️♥️😎😎😘😘
Thank you so much 🙏🙏🙏
Изобретатель высшего уровня 🔥, очень круто.!!! Золотые руки..!!!
Большое Вам спасибо
Awesome restoration and also never makes any mistakes gear show u are awesome
Thank you so much!
Amazing. I love the somewhat genuine sticker “modify by” 😂 Congrats, very entertaining
Долго ждал без щёточный мотор). Как всегда супер.
Да, большое спасибо
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
You're welcome, I'm glad you like it.
I like your creativity ..
Thank you!
Very impressive. That was a lot of work
Amazing!Nice work and respect.👍
Thank you!
Wow! Pretty impressive work.
Thank you! Cheers!
Wonderful restored sir nice work 👏👏👍you are fantastic
I'm so glad to hear that, thank you!
Love watching a master of his craft at work❤ 😊
Great job! Interesting that you managed to find a motor that fits nearly perfect.
Yes, thank you!
Amazing job my friend congratulations 👏👏👏👏
Thank you!
That was incredible!! That comparison was really surprising although it must be emphasized that You used a 18v to 6Ah battery in the modified drill and in the Makita you used a 16v to 3Ah battery and it is something to be considered by watt's law but fantastic, I loved that modification 👌
Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
Thank you!
great job man super clean job mr tool
Thank you!
Nice restoration. 👍👍
i have been waiting for a long time
You are not alone, bro 😂
@@MYs0708 yeah every time I'm always waiting 🤣
I'm glad you like this kind of video
@@gear_show I'm always waiting for the latest content from your channel 👍
Widzę tu jeszcze jeden problem jak zakładasz ten stary wentylator to musisz zdemontować ten na silniku brushless ponieważ one będą działać przeciw sobie tworząc z jednej i drugiej strony podciśnienie w efekcie brak chłodzenia stojana silnika i jego przegrzanie bo potrzebny strumień powietrza i wentylator tylko z jednej strony!
You have a real talent, amazing. Thank you
Thank you!
Skeptical if a press fit would be enough to keep the modified armature spindle from spinning under high torque
Obviously not 😂, but was fun to watch 😊
Ottimo tutorial COMPLIMENTI 👍👍👍👍👍👍👍👍👍👍
Don't know if it's been said before, but you should add links to where you buy your new parts (like when you make a battery). That way we know where to get parts and you should be able to make a little off of any sale.
Great work! Love the videos. I'll be traveling to Japan this summer and look forward to finding some tools to bring back.
I'm sorry about it, I bought those items from China online store. Some items are available for a short period of time.
You should do a shop tour
Bardzo dobra robota. Patrzenie na to jak remontujesz i przerabiasz stary sprzęt to przyjemność i uczta dla oczu 😎
Bardzo się cieszę z Twojej opinii
How about this..make power cable same time.. situation of battery shortage or out..and make switch want to choise battery or electricity direct.
Nice restoration. This is absolutely something new. 👍👍
Thank you!
Nice modification. Please now make all of my non brushless tool into brushless. I will send to you now! 😅
I'm so happy to hear that, I hope I can do it for you.
Ultimate talent you are
Thank you!
Can you share link for motor, speed controller and battery holder? Thanks.
วิดีโอของคุณทำให้ฉันเพลิดเพลิน❤
Dude you are amazing and very talented love your videos
Ur video always amazing,really can’t wait for ur next coming videos Mr gear show ❤❤❤❤❤❤❤❤sending Love from ur real fan ❤❤❤❤❤❤
Thank you so much for many loves ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Selalu istimewa,,, dimana bisa beli bldc nya ?
You can buy it from China online shop. Taobao, aliexpress, etc.
@@gear_show thanks for information
How you can ensure that the motor won't spin around the extra piece what you added? 13:37
That’s the first thing I thought too. The press fit looked tight, but it needed some kind of anchor to ensure it doesn’t eventually start spinning around the shaft.
The correct tolerance fit would make sure that never spun. Many pillar drills have chucks that are just interference fit.
Thermal expansion after the first use should "weld?!" it.
Зачётное восстановление 👍, я думал зачем восстанавливать перф, если якорь с большим пробегом, а оказалось старика омолодили🇺🇦
Absoluter Wahnsinn 👍🏻Respekt !!!
Nice video my friend 👍👍👍
Thank you!
Wow! Realmente me gustaría realizar todo lo que haces. Felicidades
Makita Rotary Hammer Drill Pro Max :) Video rất hay và tuyệt vời.
Thank you!
Such a great work!
Not having those 2 screws in would bug the hell out of me 😂😂
Nice one - would help to know where to get the 18v motor ?
Excellent Build 😁😁👍👍
Wah keren juga sih guys 😅😊
Very goooood bro
Respect
Gerçekten tebrik ediyorum güzel bir iş yaptın
It's time for you to create your store. A huge list of equipment was converted to a battery.
Yes, I hope I have it, thank you!
Semplicemente, GENIO.
With power comes responsibility.
Save truth.
its truly satisfying video 💯👌🏻👏🏻👏🏻
with your knowledge about power tools, electricity and restorations, i think you can made your own power tools, maybe named "GS a.k.a. GearShow Power Tools" 😁👌🏻👌🏻💪🏻👍🏻👍🏻
So satisfying
Glad you think so!
parabéns, obrigado pela inspiração. tudo de bom
Good job
Wonderful video thanks for sharing 🙏🙏
You're welcome, thank you!
Incredible work, as usual!
Muito bom!!! Manda o link onde comprou o motor e placa?
Request bro ... Please review how to change the electric jet cleaner machine to a brushhlesh battery cleaner
Mind blowing 👍👍👍
Dove hai acquistato Il motore , regolatore e batteria ?
How much you charge for dewalt hammer drill with cord to cordless?
Thank you 👌
Excelente trabalho. Parabéns!
Супер контент спасибо!!!
Пожалуйста, я рад, что вам нравится.
Gratidão GearShow! Ficou ótimo!😊
felicidades me gusta tu trabajo
Wow comgratulation
Thank you!
Good job 👍👍
Thanks
Can you tell the brushless motor type you use?
It would be nice if you could test it and compare with other real cordless
Yes, I'm glad you like this way.
can use an BL impact wrench control board to BL rotary hammer?
ciao! that you spray on the plastics?
Amazing good idea
❤❤❤ jolie travail
Merci beaucoup!
@@gear_show 🙂
You or the best
Thank you!
Request bro ... Please review how to change the electric jet cleaner machine into a brushhlesh battery jet cleaner machine
واقعا کارت قشنگه منم مثل تو عاشق این چیزام
Your solder wire is a lead free?
The link where you bought the brushless motor
Genius
excelente trabalho, parabens gostei muito ✌
Solo una pregunta , como así pueden darle hasta destrozar las herramientas?
KH4815B018 18v dc moter where to buy
Where did you buy the brushless motor?
From where I get brush less dc motor
You guys are making it more complicated than you think he's changing out one motor for another motor so it's no longer 120 volts