I got a Dewalt battery less than a year ago, and already it's not charging, I wish there were people like you in the UK who could do this, your a lot more reliable
Is it been in rain. Open it up if you see white on the batery motherboard clean it off with a qtip and isopropyl alcohol 91% is recomended but 70% works to if that fails check each cell with a multimeter you can buy replacement ones if you know how to solder if not then rip batery btw be very carful drill batery are powerful I've melted a dime in seconds with a 20v cheap brand battery before
Thank you for your very relaxing ( no noisy music, only natural sounds, the best ! ) and very inspiring videos :) I just wonder in each of them how you calculate the rewinding, maybe in a separate video ?... Keep doing such nice videos, thank you :)
@@gear_show It seems obvious to you but trust me it's not for us ;) I still don't understand :) Believe me, a whole video on this subject would be helpful for a lot of your followers ;)
Definitely. Converted both my grandparents to DC. They run fantastic...except I get offered biscuits at a much faster rate than before, so I think I got the turns wrong when I rewound their coils!
I finally recognized the bin you wash your parts in. It was so familiar, but I couldn't figure it out... It's the lid to an old combination radio with record player. Haha, nice.
Nice video as always. I click the like button on every video at the beginning because i know im going to like them before i finnish them your videos are that good. Thanks for all your hard work to make us happy
@@gear_show What happens if I change the number of magnets in this motor from 2 to 4 magnets, what parameters will change, RPM will increase-decrease ? motor power in (W) will increase-decrease? current consumption (A) ?
perfect music for the moment when he runs sander from battery is Dave Rodgers - Deja Vu Déjà vu I've just been in this place before Higher on the street And I know it's my time to go
Awesome effort. Maybe can use loctite or hot glue screw nut (new battery connection housing to the body) to stop vibration from loosening screws and nuts.
I got a Dewalt battery less than a year ago, and already it's not charging, I wish there were people like you in the UK who could do this, your a lot more reliable
Oh, I'm so happy to hear that. Thank you so much for trusting me!
Is it been in rain. Open it up if you see white on the batery motherboard clean it off with a qtip and isopropyl alcohol 91% is recomended but 70% works to if that fails check each cell with a multimeter you can buy replacement ones if you know how to solder if not then rip batery btw be very carful drill batery are powerful I've melted a dime in seconds with a 20v cheap brand battery before
@@bloopbloop5663 I Just sent it back today, It's less than a year old and still under UK warranty, in the UK things have a 6-year warranty
You are basically king of social media restoration!
you started to love changing the voltage of machines great work as usual
Yes, thank you :)
An artist always remains a bravo artist
Nice video my friend. Good idea.
Thank you so much my friend.
@@gear_show то йййй
26:50 everybody gangsta till the sander starts sliding
Tokyo drift
right
I can't even imagine how much money should I get payed to have the patience of this man.
Your work is amazing, by the way!
Thank you so much! I'm so glad to hear that.
24:33 Thor's Hammer with massage function.
Мёльнер с функцией массажа.
Haha...
If I bring this tool to home, next day the kids will racing by it 😹
😅😅😅
I would too🤣
haha,
thank you so much, you are the best one to teach conversion without speaking
I was genuinely surprised when I saw that old beast jump back to life at the start, and in that bad condition too. It's simply astounding
EXCELLENT MATE...LOVE WATCHING YOUR VIDEOS HERE IN THE UK
Good job with all the best information and knowledge 👍
Lord of gear, and Lord of tools!
Thank you :)
Nice bro always greetings from Philippines🇵🇭
You are a master of crafting. I have learned a lot from you! once again sincerely thank you!
My pleasure, I'm so glad to hear that.
Love these cordless conversions! Made me laugh at the end. Looked like it was a bit hard to handle! 😅
Yes, It was!
Комментарий в поддержку видео и канала, а также труда мастера
Good to see rewinding technik. 👍 U r awesome 🤠
Thank you! I'm glad you like it.
Awesome Mr gear show , you always did best work 🥰
Thank you so much 😀
@@gear_show ❤️❤️❤️❤️❤️
I am very satisfied with the result too, you did a great job dude; our motto, use head 😀
Thank you!
El que sabe....Sabe.... excelente video y proyecto, felicidades por su talento y conocimientos saludos cordiales 🖐️ desde Chile 🇨🇱, 👍
¡Muchas gracias! Me alegro de que este popup en Chile
Your videos are superb and your perfection in work is amazing!!
Thank you so much!
I respect you and you can do anything 👍👍👍👍💯💯💯💯🥰🥰🥰🥰
It's really amazing creation to totally change it sir. Awesome 👍👍
Thank you! I'm glad you like it.
Wow, amazing work with rewinding of the motor! Thumbs up.
Thank you! I'm glad you like it.
Thank you! I'm glad you like it.
Thank you for teaching us how to rewind a armature I've been practicing the 3v armature and it works but it's heating quickly when I power at 5v..
My pleasure, I'm so glad it helps you.
fully automatic cordless sander - just turn it on and it will start working by itself.... :)
It would be great, if it works by itself...thank you!
Another sensational result. Well done you,excellent work.👍
Brilliant and I always like your videos very much
I love your videos, I'm a super fan of your channel
I'm glad you like this video, thank you!
Εύγε, συγχαρητήρια πολύ ωραία μετατροπή.
Nice restoration
26:50 super drift😁😂
Thank you for your very relaxing ( no noisy music, only natural sounds, the best ! ) and very inspiring videos :) I just wonder in each of them how you calculate the rewinding, maybe in a separate video ?... Keep doing such nice videos, thank you :)
I just follow 18V and 24V armature structure and combine it together. Thank you!
@@gear_show It seems obvious to you but trust me it's not for us ;) I still don't understand :) Believe me, a whole video on this subject would be helpful for a lot of your followers ;)
😂
how are you buddy
I like the old pen 🖊 trick with the wire
My grandmother is 96 years old. Do you think you could get some more life out of her by converting her to DC?
⁴ttgxaatea'&6¢&5№44•®√😐©😐
Haha I wish I could save her more life. Away I wish your grandmother a long and healthy life.
Definitely. Converted both my grandparents to DC. They run fantastic...except I get offered biscuits at a much faster rate than before, so I think I got the turns wrong when I rewound their coils!
You can give her some new windings and conservate her with some epoxy.
.Excellent work👍👍👍. Thanks for sharing
Thank you 👍
Mind blowing idea my friend
Detailed and satisfying. Great work.
Thank you very much!
Tecnico con i contro........
Molto Bravo, i miei complimenti!!!!!
Awesome repairing man. 👍👍👍 1,000,000 Like 😊
Brilliant job, have a nice day and Stay Safe Friend !!!.
Fantástico! A alça foi a cereja do bolo! Parabéns!
Thank you1
Super presentation 👍
Thank you! I'm glad you like it.
Someone tell him,that he crazy one, by the way, very respect him, very cool channel, i lern much from him than from hight school
I'm glad it helps you, thank you!
Great job ! Greetings from Texas 🤠
very difficult but great work 👍
I finally recognized the bin you wash your parts in. It was so familiar, but I couldn't figure it out... It's the lid to an old combination radio with record player. Haha, nice.
Nice way to re-purpose a turntable lid 👍
Thank you!
Спасибо за видео!!! Это круто!!!
С удовольствием, я рад, что вам понравилось это видео.
Друг, я из России. Ты делаешь супер восстановления. Всегда тебя смотрю!
Привет, друг! Я так рада, что тебе понравилась эта работа. Спасибо!
Beautiful video
Thank you!
Worth to watch..thank you for the video
Glad you enjoyed it
Great job on this one.
Thank you!
Exelente trabajo amigo¡
¡Gracias mi amigo!
Nice job my friend👍👍👍
Thank you my friend :D
Ottimo lavoro fratello, complimenti
Grazie Fratello!
عمل جيد صديقي كالعادة.
شكرا لك مجددا صديقي.
Great conversion.loved the video
Thank you! I'm glad you love it.
Fantastic job a joy to see
Thank you! I'm glad you like it.
This cordless sander conversion it's look like a (hammer) mode tools is a next gen tools stuff man.
You are a genius
You are awesome bro👍👍👍 great videos great works👍👍👍
Thank you so much 😀
Un gran trabajo, buena idea y bien ejecutado.
¡Muchas gracias!
Nice job, now as you forget, you will have to run after it
Thank you!
Very good Job Love it more ❤️👍❤️
I'm glad you like it
Nice video as always. I click the like button on every video at the beginning because i know im going to like them before i finnish them your videos are that good. Thanks for all your hard work to make us happy
Use jewel saw for smooth cutting of armature old winding
It is easier than hack saw to control
Awesome build! Keep up the good work!
Just what I needed!
Great job Sensei 👍
Thanks for the visit
Very very good work ❤️❤️❤️❤️
Magnifique modification bon courage
Absolutamente increíble, eres muy bueno, tio
¡Muchos gracias!
Wow! impressive
Really good video keep up the good work
Thank you!
Very impressive build dude big thumbs up :-)
Thank you so much :-)
Perfect machine level up. 😁😎
Indeed it is! thank you!
That sander can drift! 26:48
Волшебник !
seu trabalho é bonito de se ver... a conversão ficou perfeita.
Good video idea 👍 :)
Thank you!
nice idea . keep going like this...
Thank you, I will
Wow cool job
How do you cqlculate the number of windings and wire size of windings needed?
quick maffs
@@zahidshabir4038 reasonable explanation LOL
I follow 24V armature structure.
@@gear_show What happens if I change the number of magnets in this motor from 2 to 4 magnets, what parameters will change, RPM will increase-decrease ? motor power in (W) will increase-decrease? current consumption (A) ?
Very neat. Thank you.
Glad you liked it!
Great job! It would be great to use a lathe for some operations.
Отличная работа! Было бы здорово для некоторых операций использовать токарный станок
Yes, you're right.
perfect music for the moment when he runs sander from battery is
Dave Rodgers - Deja Vu
Déjà vu
I've just been in this place before
Higher on the street
And I know it's my time to go
22:00 so setisfiying 😌😌
Okay, I'm glad you like it.
Awesome effort. Maybe can use loctite or hot glue screw nut (new battery connection housing to the body) to stop vibration from loosening screws and nuts.
merci pour la videoc'est tres de votre part felicitation
Mon plaisir, je suis content que ça te plaise.
I always enjoy your videos. One day I will be brave enough to do a 110v -> 18v conversion on my scraper :)
Very very nice 👍👍
Thanks a lot
Awesome sir
Thank you!
Cool video.
Tuyệt vời 👍
Cam ơn!
I love this channel. 🇧🇷
Thank you!
Great Work!!!!!
Thank you!
Nice video👍👍👍👍👍👍👍👍👍👍👍big like
Thank you :D