Customize your Q50 headlights: Demon eyes, Etched lenses & Blueghozt PLUS custom animations (PART 3)
HTML-код
- Опубликовано: 17 июл 2024
- Finally completed the retrofit on the headlights of my Infiniti Q 50. In this video I share the process of installing the blue ghost controller, demon eyes, and etched lenses, and the components and wiring that enable custom welcome & exit animations as well as sequential turn signals!
THIS IS PART 3!!! If you need info on getting the headlights out and disassembling, start at PART 1:
• How to customize Infin...
GLOWE DIY Q50 Headlight Kit - INCLUDES DEMON EYES
squarewheelsauto.com/products...
Etched lenses available on my site too
Buy me a coffee/beer:
www.buymeacoffee.com/squarewh...
Here's the wiring diagram I pulled together:
squarewheelsauto.com/infiniti-...
Whenever I say 'tap a signal,' chances are I'm using one of these:
amzn.to/3F52DJN
Diode Dynamic Demon Eyes Controller:
amzn.to/3wrPHI4
JST Connectors:
amzn.to/3hqCZp2
Chapters:
0:00 - Intro
3:09 - BlueGhozt Overview & Wiring guide
4:55 - Wiring Diagram for the whole project!
8:37 - BlueGhozt Triggers (Engine On, Parking Lights & Turn Signals)
10:45 - Installing Etched Lenses
14:06 - Wiring & Installing Demon Eyes
18:57 - Positioning in car/engine bay Авто/Мото
Dude if builders only knew that them holding so tightly onto their info and experience, instead of sharing it with the world like you’ve done here, is exactly why they’re not growing their brands and making more money.
There’s enough business out there for everyone, and same goes for here on RUclips. Abundance ftw!
You did great bro. 👊
Preciate u man, been watching u for a min!!! 🙏🏽🙏🏽🙏🏽
yup and still they will get business because alot of ppl arent into diy
@@SquareWheelsAuto Would you know where I could get the information to wire up a set of 2020 infiniti qx80 headlights
@@remo9310 Only if they’re stupid enough to pay $3500 for that bullshit.
Let's get this man to 1k subscribers already so he can get paid for this. Being a content creator is not easy. He put his heart and soul into making and editing this.
Appreciate u brother! I'ma get there! 🙏🏽🙏🏽🙏🏽
💯
Amazing. Purchasing a Q50 next week and I really look up to your channel for inspiration and guidance. Very much appreciated sir
Thank you very much for taking the time out to make this video for us q50 owners
Great work!! Gives me more confidence in my build!
Pretty badass!! Getting my Q50 3.0 tomorrow and have been looking for stuff like this, thanks for taking the time out to share your experience and saving us hella time! Subscribed!
Congrats!!!! And thx for the support! 🙌🏾🙌🏾🙌🏾
Thx for the knowledge and time making these videos bro. Much appreciated. Easy to watch and follow too🙏🏼
This is a great video! I'm far too impatient for these types of projects, but the lights definitely look awesome! Well done.
Thanks boss that means a lot coming from u!! Not a terrible weekend project but you nailed it - patience is key!!
Thank you so much for this series. Your the first one to give up the secrets to retrofitting headlights that so many of us DIY'ers wanted to know.
Appreciate it @KrashFinatik - thanks for watching!!!
I was so scared to cook my lenses or really even start this, but now I feel confident that I can do this mod successfully. Amazing work, I and the community thank you!
Good luck man and thx for the support! love to hear ppl empowered by this info - y'all got this!!! 💪
Thanks for the vid. I’m slowly installing the BlueGhozt and projectors on my Silverado and just needed confirmation to clear up some of the wiring. Great vid appreciate the info. 🙏🏾
oh cool! glad its helpful for my chevy homies too 😎
This is pretty dope I have custom headlights on my q50 without the demon eyes I always wondered how much went into it and after seeing this man that2k wasn’t that bad I don’t have any of the wires visible no funky controllers hanging around it’s super neat and oem finish all tucked up and away from eye sight
Just earned yourself a new subscriber! Dope content, having a q50 myself made all of this easier. Thank you 🙏🏼
Thx for the support Jay - glad its helpful!!!
This is Gold man, thanks a lot for all the information, 🙏 as you say no one on earth shares this type of info lol, please keep It up, great video, I just sub
Very informational.
You also helped me installing the subwoofer in my q50rs. Thanks
Thx for the support! Glad to have helped!
Best headlights I’ve seen ever demon eyes looking good
Thanks! Yeah the demons and etched lenses set it off, I'm happy how it all came out! 😎
Perfect timing with this video bro! Planned on tackling this mod this weekend 💯 #Subscribed
Good luck man - hit me up if u get stuck I'll do my best to help u thru!!
dope thank you for the video i saw a good technique a kid used using masking tape and applying the "etch" vinyl like a actual vinyl and didnt have to remove the lense from the base. also gloves are super legit for stuff like this. im so hyped, literally about to go pick up my first q50 in a couple hours.
Welcome to the fam!!! 🙌🏾🙌🏾
@@SquareWheelsAuto i could weep im so hyped
Yo fam...Loving the look of the car, and loving the detailed DIY. This project I'm going to tackle soon. Hopefully it will be my last exterior mod, which I'm sure it won't be lol
If I had a nickel for every time I said 'last mod' I could buy more mods!!!
Audio quality 👌🏾
Appreciate the info ! Sub earned
You the goat b! You murdered this!! No one is topping this video even if they are getting “top” while making their video 🙌🏽 🤣🤣🤣 just sayin fam this shit winning! oh, let’s keep with the previous- you on TOP!!
I just watched this vid set from start to finish. Great vids! Have you heard of any company making a complete kit yet? 😎👍
I'm working with Glowe on one!!! 🙌🏾
New subscriber here.. this video is what I needed.. thank you..
Glad to be a help!!!
Thank you for this video you broke everything down headlights came out 🔥 🔥 🔥 where can l get the honeycomb sticker for the lens?
Thanks for sharing.. subscribed ✅
Currently running flow series on my q50 headlights do I just plug the blueghozt module onto the power and then the flow series module?
They look awesome. Reason you can't use one controller for the demon eyes and the halos is because the halos are individually adressable and have a controller inside of each led on the halo. They are also controlled with just 3 wires where as the demon eyes do not have any controllers on board the led so they need one main controller to control them and they use 4 wires usually unless there is a dedicated white led which will be 5 wires. It would be possible to make a controller that can do both but it would be costly and complicated
Thanks for this intel man!!!! I saw the 3 vs 5 wires difference but didn't realize the addressable LEDs had controllers on board. Another mystery solved🤙🏽🤙🏽🤙🏽
Where can i get the etched lens vinyl to buy?
Are you able to keep the DRL’s on when the headlights turn on? Mine shut off.
So I traded headlights with someone that had the light trendz kit, and I downloaded the magic led app for it and the controller won’t pop up. The lights drew power and showed it white and then the rainbow. Do you think I have any problems on my
End? Or is it a different app that may be used
Would the Drl wires be going to pin 2 ? And would they also stay on at night with low beams using pin 2 ?
@SquareWheels Automotive great vid. Have you seen the 8 output ghozt controller?
I'm pretty sure its the exact same hardware, just with the signal split. I say this because my "4 output" was just the same signal with 2x2 splitters
Any link for that exact driver?
Hey man great tutorials on the headlight retrofit!! Really appreciate your time with this. I have got everything to do my headlights atm other then the lightingtrendz flow series drl kit which is supposed to be delivered this Thursday. I’m wondering what kind of glue did you use to put the projector lenses back into its housing?
Also I didn’t go with a blueghost controller atm. I know all your animations look bad ass but Idk if I wanna mess with all that right now. Do you think it’s worth the extra money and time to do the blueghost as opposed to the Bluetooth controllers from lightingtrends and diode dynamics?
Thx for watching! Glad to hear you're gonna give it a shot!
re: glue - I used permatex super glue (its just what we had in the kitchen drawer lol) - has held up fine so far
re: blueghozt - cant go wrong either way, but honestly i wish i would have known about the blueghozt first time round. the animations are a cool bonus but the true power of it is its ability to always be on, and respond to triggers from the car (door open, turn signals, lights on, etc).
Also, def consider it if you think you might expand beyond just headlights/DRLs. I didn't plan to, but I ended up adding my LED emblem, DRL turn signals, and underglow - all powered by the blueghozt - its a beast.
@@SquareWheelsAuto ok cool I’ll check out the blueghostz controller and see if it’s for me. I would like to add an led emblem at some point and I like the switchback drl turn signals on yours so maybe it’s worth buying.
Drop in a Morimoto 3" STi-r glass lens on the projector. The OEM ones are plastic. Remove the plastic OEM, cut off the 3 little alignment nubs. The new glass one does not need to be glued back on as the chrome housing will secure the lens in place very well with no glue or brackets needed. Result is a blue cut-off and improved clarity. Worth the extra $60.00 bucks for the lens. I did mine when i smoked out the Cress and amber side reflector.
Yep I did mine too when I ripped out all the lightingtrends crap and switched over to Glowe. I'm offering the lens upgrade as an add-on to the etched lens service on my site, I'm just out of stock on the lenses: squarewheelsauto.com/collections/aftermarket-lighting/products/etched-lenses?variant=43153294917840
The wiring diagram link in the description says "page not found" 😅
Hi. Great job, tell me where to buy lens stickers in the form of small hexagons that you glued on the video.
I had a hookup for these etched lens overlays, but he's no longer offering them. Sorry.
Will this work on q60s as well? I’m probably going to follow this wiring guide but I’m not sure if everything lines up the same.
idk, never been in a set of 60 lights! post up and let us know!
so on the ln 1 wire for the blueghozzt controller, if im using that as a 12v switch, what do i connect the converter to?.. confusing straight to the battery?
What converter? DM me on IG!
SHOUTS TO U BRO FOR THESE DIY all these damn busters trying to hold it secret so they can charge $800 smh
Will connecting both ring terminal to the positive and negative on the battery instead of a ground run it out faster? My 12v-5v converter came with a very short ground wire
For the ghozt controller
@@cambeezytv4850 dont understand the question here
I believe you'll still have parasetic drain though. You need to add a switch.
Hi, do you have a link to the red bar a cross the engine?
Don't have a link but it's a Tanabe STB (Strut Tower Bar) for frame rigidity
Hey man after I finished my retrofit, my passenger low beam is burnt out 🤦♂️. From what I’ve researched there is no way to replace the led low beam bulb. For some reason they don’t less a replacement bulb. So I pulled the headlight back out, baked it dissembled everything inside the headlight again. Checked for any loose wires and still no low beam function, Only thing I can figure is I some how damaged the low beam bulb when I was doing my retrofit. So I just ordered a used OEM headlight off eBay for $400. Going to have to bake it and swap over the low beam led housing over to my retrofitted headlight. This simple job turned out to be very expensive. Good thing is after doing the retrofit i can take the headlight out and bake/dissemble it in less 30 mins now 😂
OMG man sorry to hear it!!! I've baked my headlights 4 times now with no issue, but admittedly have never handled the low beam LED :( Hope this time round works out for ya - mebbe after all this you can open up a retro shop and recoup that $400 😅😎
@@SquareWheelsAuto lol yessir that’s a great idea!
@@SquareWheelsAuto sup bro, I figured out the cause of my low beam shorting out. Turns out I broke the wire that connects the low beam to that black box at the bottom of the headlight. So I swapped it out for the new headlight that came in and I’m back in business.
Everything works properly again. So now I have an extra full passenger headlight I plan to solder the wire back together and either sell or keep for parts 😂. Can prolly sell it for more than I got it for or buy a matching driver side and start doing Q50 headlight retrofits with core charges. They send me their headlights and I’ll give them the ones I’ve already completed or make theirs custom how they want them. Appreciate all your guides and responses my man. None of this would have been possible without your help! Do you have IG? So I can show you my work
What’s the link to buy the overlay vinyl for the etching effect on projector?
link in description
@@SquareWheelsAuto you only link the kit, I dint see a specific link for over lays
can you run flow series and demon eyez at the same time?
Yep theyre completely independent. The into of this video shows demon eyes on, with flow series DRLs animating 👍🏾👍🏾
Hey brotha, the wires you used for the inputs, were they supposed to come with the blueghozt controller? Or.. I’m genuinely confused 😅
Nope usually need to bring your own trigger wires
How many outputs needed for the blueghost, prewired or non?
I did 4 outputs, prewired, mostly because I didn't know what I was doing or what to expect.
If you order prewiring from lightingtrendz, definitely open it up and confirm everything's actually wired; they missed a connection on mine 😤🤬
Hi, can you assist me with the blueghozt installation. My headlights and my demon eyes are wired directly to my battery, and I wanted to add my headlights, demon lights to the blueghozt.
hit me on IG I'll send you a rough wiring diagram of how I did mine using a Blueghozt Plus.
@@SquareWheelsAuto ok. I just did. Thank you
were did you get the frosted
I sprayed them with Krylon frosted glass paint while I had them out
Can I use with my factory leds
Please elaborate
Could you use a heat gun to open it to? Or does it have to be the oven
Probably a million ways to warm up the sealant, I just know what worked for me 🤘🤓
Hey broz me again, I'm on day 3 working on the headlights lol. So we FINALLY got everything wired and connected. Only concern is that the demon eyes and the lash (the lights to the right of the demon eyes) does not turn off by itself when the car is on and locked. I have to do it in the app. Is this normal? I'm just worried that one day I forget to turn it off in the app and kills the battery.
I e got the demon eyes getting power off one of my Blueghozt Plus outputs, set to triggered. So it only turns on when the DRLs are on.
@@SquareWheelsAuto ahhh there's the problem. I don't have that module. Thank you, will have to be a future purchase cause I'm broke
U could do a cheap switch or relay off Amazon in the interim! Check out my relay video! That's all the Blueghozt plus is doing anyway
Also, your demon eyes are still drawing from the battery even after you turn them off in the app. The controller, the Bluetooth, and probably the LEDs themselves all continue doing their jobs of listening for commands. It'd take a while (days between charges, not hours) to drain the battery but still something to keep in mind
@@SquareWheelsAuto ah ok didn't know that. I daily drive my car so it should be no issue. Definitely will be checking out your relay video!
Bro I have some stage 3 retro headlights for my Q70 and I dont have a clue. I live in jacksonville Florida
Is there anyone near jacksonville Florida that can do the install?
Hey where can I have the panel that goes behind the projector crystal?
You mean the etched lenses overlay? Check my site!
It says sold out bro :(
You could make a company with all this information
Bro I bought the q50 custom headlight like yours but I don't know how to wire them do u have the wiring diagram or instructions how wire them please
Did u watch these videos? I covered wiring in pretty good detail, and provided a wiring diagram. Lmk if I'm missing something?
I did but still couldn't figure it out
I got to many wires is there any I can show u my wires
@@iftiahmed35 hit my IG @squarewheelsauto
I’m curious to know why connect LN1 to 12v switch.
The DRL (LN2) circuit cuts out when the car turns on. So I have switched 12 going to LN1 to keep the lights on when the engines running 👍🏾👍🏾
@@SquareWheelsAuto I see. I noticed that when it’s connected to the 12v switch it keeps the brake witch activated in the app. If that’s the case will the app allow you to change shows. 🤔
@@Hharris009 yeah in the settings screen you can change LN1 from brake mode to show mode. Either way just set it to display solid white (or whatever you want your drls to run on when the cars on)
Do you always have to go in app to turn these on and off ? Or it turns offs when you turn the car off ? Lastly does the demon eyes shows when in auto mode ?
Nope, they completely respond to inputs and switched power from the vehicle. Once I've got it configured, I rarely go into the app unless I want to set a show mode.
The way I have it setup in the video, demon eyes come on when the car is on, and if/when the headlights turn on, the demon eyes cut off.
@@SquareWheelsAuto okay and what about when you turn the car off do the demon eyes shut off or you have to go in app to shut them off?
@@youngsuavekiddd1 its all automatic. blueghozt does the shutdown animation, and then everything turns off.
@@SquareWheelsAuto i have diode dynamics i have to go in app to turn mines off and on that part I really hate. Plus i came to conclusion demon eyes is only for day cause i i can’t see nothing at night
Did you need the 5v or 12v controller?
Get the controller that matches the voltage of whatever strips you have. For this video I had 5v strips in.
@SquareWheels Automotive I got the same kit from lightningtrendz so I guess it should be the same.
@@Elvis_Kunda yep lightingtrendz was 5v at the time I made this video.
Can you install demon eyes and halo lights on the same channel
Technically, yes, it'd jus take some fancy wiring. You'd have to run just data to both and figure out how each of them wants to be powered.
Keep in mind demon eyes are generally just 1 pixel so it might not come out how you want (it could potentially be off most of the time while an animation is happening)
@@SquareWheelsAuto thank you
only thing is the wiring that leaves the fuse block is protected by a 50 Amp fuse way to large for #14 awg even #12 awg
hey! tell me more about this! especially if you have recommendations for safer places to get power!
Ugh! I hate that I found your channel! Now I have so many more projects for my Q50 RS. My wallet hates you! lol! Great content. Thank you for sharing & keep up the great work.
Sorry not sorry 🤣😭
Thanks for watching and stay tuned, more wallet challenges coming up!!
@@SquareWheelsAuto DAMNIT!!!! 🤣
😆😆😆😆😆🤷🏾♂️
😂🤣Weird scissoring with no pleasure. Great video!
😅😅
I was on the floor dying
What pin exactly did u tap for the turn signal. U mentioned parking light pin as 2. Is tht the same pin for turn signals u never specificed HELP
I tapped the actual bumper turn signals
@@SquareWheelsAuto do u remember which wire (color) it was? I haven’t taken off my bumper as yet so not sure exactly which wire from the fog light to tap, unless it’s one wire
Q50 / q60 headlight are same ?
Nope
What brand was the drl or was that oem?
Originally lightingtrendz but I've upgraded to Glowe: instagram.com/reel/CilzEnFj67u/
@@SquareWheelsAuto i went to the website but i only see under glow? Is light trendz bright enough under direct sunlight?
@@arellano7103 squarewheelsauto.com/products/rgb-headlight-kit-for-infiniti-q50-glowe-industries
I don't recommend lightingtrendz anymore, I've heard/seen enough horror stories.
@@SquareWheelsAuto thank you so much for the info I really appreciate it 👍
But this is for your 2015 and NOT for my 2021 Q50 correct?
Believe the headlights have stayed the same through the entire lineup
All in all how much did you spend?
How much did *I* spend? Idk lol. a lot went to R&D/trial and error/buying wrong parts, etc. But everything in this video can be done for around $500
Lmaoo i wonder how many people almost burned down their house baking their headlights.🤣😭 I did a set of LS430's With dual projectors and switchback halos.. Getting the larger projectors to play with the self-leveling and then sealing it again, hoping nothing would melt inside was a pain!! Came out amazing tho.
Ayeee
U never get moisture in your headlights??
Nope
@@SquareWheelsAuto dam why mine doing that I sealed it good too smh
Props to man.. I'm also looking for DIY it's not rocket science and people are charging over 2000 dollars 😂
Thought I was in class listening to this 😐
🆗
I heard vinyl on lens isn’t proper way and etching is better and more accurate way to do it. I c you used vinyl overlay on lens how did this last?
Going on 3 years on my Q, had vinyl on the lenses of my G for 6yrs before I sold it. If we’re just trying to make semitransparent patterns on our lenses, what does “better and more accurate” actually mean? 🤷🏾♂️
@@SquareWheelsAutowhere did u get the cutout vinyl over lay to buy, or print?
@@boostedsamuari7436 squarewheelsauto.com
Heard your voice and said tell me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
😂😂😂
This is the vid series headlight retro fitters don’t want you to see!
Poppin the hood so we can all shine 💯
Wish I wasn’t lazy
🤣🤣
I just paid 1400 for this sheet
Lighting Trendz charges over $3k to do a set of Q50 headlights and that’s if you take out your own lights and ship them off to them. For $3500 they should send you a brand new set with their mods included. Anyone willing to pay these greedy assholes that much is simply insane. 🙄
PREACH!