So you want to Retrofit your Q50 headlights : Part 1 Opening and painting

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 16

  • @N0b00st
    @N0b00st 13 дней назад

    Are you local to GA? Dope work

  • @Isanderr
    @Isanderr 28 дней назад

    I wanna do this but im scared ill mess it up 😭. Also did this affect the headlights performance at night ?

  • @rayrobot
    @rayrobot 4 месяца назад

    Wow, I'm literally in the middle of doing this. My frosted lens does not look good after painting 7 coats. Looks uneven. Do you paint both sides or just the front side? Any other tips to make it look more frost/white? I tried putting a thick coat down and still no help.

    • @boostedsamuari7436
      @boostedsamuari7436  4 месяца назад

      Yup the key is time lol. I did 12 coast actually. Inside and out.

    • @boostedsamuari7436
      @boostedsamuari7436  4 месяца назад

      U spray a coat, wait 10mins. Then spray again. Wait 10mins and keep repeating that

    • @boostedsamuari7436
      @boostedsamuari7436  4 месяца назад

      Just gotta trust the process. Mine looked uneven at first. I edit that part out 😂😅. Just gotta keep adding layers every 10 mins. I sides and out. What I do is with a glove on. While holding the tab NOT ANY SURFACE OF THE EYEBROW OR CRESENT, the tab, hold it up and spray 2 times inside and out. Then put it down to dry for 10 mins. Then do it again 10-12 times

  • @LuisC202
    @LuisC202 3 месяца назад

    Aqesome video. Thamks will be doing my q50 ones as well.

  • @adolfobello8634
    @adolfobello8634 3 месяца назад

    How hot on the oven?

    • @boostedsamuari7436
      @boostedsamuari7436  3 месяца назад +1

      270

    • @piotrwujcikowski9926
      @piotrwujcikowski9926 2 месяца назад

      @@boostedsamuari7436 270°F which is 132°C. IMHO it's to much. 60-70°C or 140-160°F should be enough...

    • @boostedsamuari7436
      @boostedsamuari7436  2 месяца назад

      @@piotrwujcikowski9926 I’ve done this multiple times. 270°-275°F is best for 6:30 mins. Haven’t burnt or melted anything. Lights came out hot and super easy to open. If u want to do 140°F go ahead. Might be harder tbh