Ford F150 3.5L EcoBoost P0111 P012B P012C
HTML-код
- Опубликовано: 18 ноя 2020
- In this quick tip I show a 2013 Ford F150 Pickup equipped with the 3.5L EcoBoost engine which came in with a customer complaint of an illuminated check engine light and stored codes P0111, P012B and P012C. Watch this quick Tip video for more information and the fix for this common issue effecting a broad year range of 3.5L EcoBoost equipped trucks.
Subscribe now to The Car Doctor Channel Авто/Мото
Another great video from The Car Doctor! Thanks Tim and stay warm!
Will do. Thank you
thanks for the video Tim, haven't seen much of you lately hope to see more videos.
Yes. I’ve been super busy with some big projects. Big changes coming soon!
Keep warm my friend. Thanks for the video. Have a great turkey day.
Thanks. Thankful for my viewers. Blessings
Got a question, Tim...
I like your video, which is very informative. I gotta 2013 F150 Ecoboost 3.5 which shows a code P012D.
Does this procedure apply to this code as well?? I'm trying to fix this myself, BEFORE going to a dealership or other hungry mechanic.
Look at you, over 100,00 subs! That's great and well deserved.
Thanks buddy.
@@ThecardoctorTV
I thank you Tim!!
I enjoy your car repairs on you tube.
Bill
Bill
Great video Tim. I’ve also seen this problem on the 3.5 Ecoboost. Definitely using OEM Motorcraft parts is the way to go. The Chinese knock-off sensors aren’t worth it from a reliability perspective. Like the old saying goes, you get what you pay for. Especially with electronic parts.
Thank you. Blessings
Tim what do you think about the Bosh equivilent Oem?
What is the part numbers used here or a link to where to get it
My 2013 flex fuel Taurus the MAF harness connector has 4 wires and there is 6 pins in the sensor which someone replaced by looking at the non factory self tapping screws holding it in. I look up the part and there’s a 4 wire MAF do you know if the 4 wire is also an AIT sensor as well or is the AIT sensor separate? I’m unable to locate it if it Is a separate sensor? It’s only throwing AIT code and live data says it’s -41’ f and it’s 75‘F in my shop
Hey , car doctor have you run into problems where the throttle body closes up while driving your 2013 Ford F-150 eco boost? And you lose throttle control?
Great video and excellent job Bro. Thanks so much for let us know the way to fix this issue.
Awesome video, thank u!
nice fix thankz ..wel done stay warm .. colld here . but not that cold ../cuting up plow truch thah got hit by tree . used lift arm to bring roof back up /89 s10 blazer plow truck . pulled all fendersoff chopping it up building new one . ..thankz a gain for the tips love it . gby . till next time .
Thank you. You sound like you have some fun projects. Make me feel like I lead a boring life. Hahaha.
@@ThecardoctorTV alaska any thing but borring .. did three weeks there great times cant wait to vist again will check you out for sure ./best frind works military base there ..
I would really appreciate it if you can give me an advice on what I can do or where to start to solve that problem and thank you very much
Been waiting for a video, Thanks!
Thanks for patiently waiting.
Hello sr, how do I have a problem with my 06 Ford Explorer, the engine starts but does not start and this happens from time to time in the morning they can learn and in the afternoon it starts normal
Smashing job as always, both sides removed from the possibility of causing later problems :-D
Ooow voltages being read by the computer, i would have to connect a 3 pin potentiometer on that connector and wind the voltage up and down for fun :-D
Im odd like that... well yes im odd, arnt we all?
Just me then lol
Odd that you spend so much time making sure it’s right. I’m normal that way. Swap parts and hope it works. Hehe
Wow, I thought you were Sylvester Stallone for a second with that fancy jacket! 😜. Great info Tim!
Haha. Glad I didn’t have to run up all those stairs in my jogging suit.
Good to see you back Tim. We all missed you. How was fishing this year?
Thanks. Fishing was fun but didn’t get rich enough to retire quite yet. Haha. Good to see you.
hi pal .. good to see ya .. happy day thankz 4 sharing ../my shop been preety busy one man show . finialy got some my stuuf time .. lolol/hapy thanksgiving ..
Thanks you too. Glad your hooked up. Lots to be thankful for.
can a hole in the exhaust cause this code? I have p012b only. shes ran great and code got thrown right after the hole in exhaust came about.
Could it be just the sensor and not the actual wiring throwing the code? The only code I had is P0111
Great tip Tim. You haven't posted any vids in awhile, I was beginning to wonder if you were okay up there in the great white north.
Haha. Yes, never been so busy. Hope to get ahead of a few projects at the ranch so I can dedicate more time for videos. Thanks for hanging in there.
Hey doc do a video on fixing the 4x4 on a 5.3 Sierra
Hey Jim I have a question I have a 2013 ford f150 3.5 eco boost with a rough idle
Great vid!!!! Happy holidays!!!?
Thank you. Happy Thanksgiving
Awesome work one of my favorite repair channels but I’m also wondering are you going to make a repair video on U joint replacement
Maybe. But I suck at u-joint replacement.
Does this apply for code P012D as well?
Have you found this out?
Hey Jim, what issues would you see if this goes bad?
Thxs Tim good info...OEM why wasn't the new plug color coded to match? Have a nice Thanksgiving to you and your family....
I think the pigtail works on other sensors also so they make it a generic color. That’s my guess and I’m sticking with it.
Thank you
What is the part number for the connector. You don’t show that in the video.
Great video. May want to look into a filter on your mic. It really echos in that big shop
A friend also lent me his scanner to review it and he does not give me any code
Good day, I tried catching the part numbers of the repair parts yet couldn't make both of them out, can someone help me with that? Thank you.
What kind of heat gun is that?(if you don't mind me asking)
Binford 1000!
It’s a bad boy. I actually got it when I was trying to thaw my pipes. Haha. Wagner Furno 750.
how to clear code?
very good video but wasn't it easier to replace just the connector head without having to cut anything?
Good luck 👍 on ford f150 trucks xlt 2011
First on race day!
Hey buddy you got horrible crimpers/strippers. You should get the good ones. Makes a huge difference
That is a wonderful idea. My crimpers suck.
👍👍🌟🌟🌟🌟👍👍
"known problem"......pretty much the whole truck!
Yes. Everyone knocks the Ecoboost, and from what I understand the data actually shows the Ecoboost is more reliable than the 5.0. That being said, I own an F 150 with 125,000 miles and it's been a money pit. Nothing to do with the Ecoboost, just everything else is always being repair.
dam that sucks , don't know what's wrong just throw the tsb at it and cross your fingers it don't come back with the same fault code because you get married to it lol
yea when parts are in stock ...?lololo
Hehe