Pharraway, You did the right thing, you recognized the problem right away and without a second thought, went straight to a second gun. Re-start without a problem. I saw that and the first thing, I thought “Air inlet restriction” on the cup. I thing we are guilty of looking at it only to make sure what direction and it’s on. We never check on a new one if plastic flashing still in the hole or never drilled. I love the extra long wood bench you have, it keeps it simple. Trucks! It might as well be a school bus. Exhausting for base, re-tape, clear. Wow, it should pay more as trucks keep getting taller. I am 6’3”, but you have to watch the bench, the hose, a spot for your hand then reaching, distance, speed, all while watching for dry spots as you plan your next wet edge! You are an athlete or a painting marathon! World Champ! Omaha.
Of course, the prep work is vital to an outstanding finish. However, the reward is when the clearcoat goes on and you see it for the first time. You’re churning out really nice work!
That's a bad situation to have...gun problems in the middle of the paint job. I don't blame you at all for finishing the job with the other paint gun. Nice quality work Pharraway 🤝
SprayWayCustoms I always laugh at these people bragging about their harbour freight guns that spray as well as an Iwata or Sata and its $20.... Umm it is until it breaks after two paint jobs. Too many Gimmick guns, Iwata, Sata, Devilbiss and a couple others, the rest are just gimmick garbage. I have cheap guns and iwatas, you have to be on crack to think one of those $50 guns are better in anyway... The packaging isn't even better.lol. I gotta get me a 1.2 Sata 5500X with the I patern next... Bad ass gun!
@@fakegibsonssuck7755 ya I dont even use the harbor freight guns for primer. The only cheaper gimmick guns I like are the spray it33000 and w400 clones. Cartman's on amazon mp version sprays the best I've seen big large air horns like the lv2 aircap. And when it needs rebuilding or parts replaced I order offical iwata parts and it's a direct fit. But in all honesty the w400s and belleria versions can be had for around 170 180 shipped on ebay. The masterpro44 gun is actually a good gun. It's a prolite made for TCP global. Parts swap and it sprays just the same. Only difference is TCP offers full rebuild kits and 1.3 1.4 1.5 and 1.8 tip kits but only offer basically the hv30 equivalent air cap. The gun will use every bit of 16cfm stated with a wide open fan. For 130 for rebranded prolite with complete replacement parts priced properly or 189 for all 4 tip kits and the high flow regulator it's a steal. I wish I'd bought two more of them instead of a bunch of bs guns. Only lower priced guns that have rivaled any of my name brand guns. The cartman h-899 started out on amazon 28 it's now 45 and worth double. It will lay glass just as my name brand prolite or sagola. Its hvlp 2 technology and is a air hog. Beautiful gun, next is the cartman mp400 it's not like the 33000 or the k400 clones. It's basically the RP version great material transfer nice large even tulip fan pattern. The next is the playtu 5500 sata clone and the playtu 5000b rp clone. I'd rather buy 7 of them then one real one. Even the guys at my shop bought some. And all were stunned by the h899 performance. There are a few gems. The Chinese can make a good product when they want to. $5 of CNC metal is 5 of cnc metal a couple ld those guns are just like name brand with a different logo but all else about equal. Even packing and seals are good. Not cheap crap that breaks. I've left solvent in some of those guns for 2 weeks with no seal issues
I just repainted my hood. Posted a pic on my Instagram. I've learned a lot from watching your videos. I've still got a ways to go but appreciate you sharing your expertise!
Thanks for making the videos, after watching, and re-watching several of them, I'm working on the courage to start painting a horse trailer project I started. Excellent work!.
That truck looks totally different, great job, I will be painting my first vehicle this week, I hope I’ll become a professional like you, thanks a lot , I’m learning a lot from you.. look me up I will be painting the black truck and I will be painting the 78 Monte Carlo sometime next summer. Thanks..
for future videos could you please show completed project, you do great work . just want to see completed with all the trim installed and masking removed. you make it look easy for sure
My friend u have been given a great gift so take care of your health and wear protective gear and mock up a door with filters so nobody reports u cause that will suck but you do some dang good work.
Love your videos. Awesome stuff. I have read a book about auto painting, been watching alot of youtuve videos and now I am close to giving it a shot. Your videos are very encouraging because you make it look simple. Thanks alot.
Came out nice! I started using Tamco for the clears and have loved the 4100, 9500, 2104 and recently the 2105 for hot weather. What's amazing about these clear for metal artist. They use a direct to metal resin and it works awesome. I've used the clear like a primer coat before spraying candy over the bare metal. This year I went full Tamco and found I love all the priners and custom colors paints also. Tammy will mix you up any custom color you want and let you name it.. lol.
That look sweet as awesome job hope my car turns out that nice doing it two toned black top with silver base, airbrushed sides with blood red candy over the whole car . Carn't wait to see more of your vids cheers from rednutts in Queensland Australia
More then one way to skin a cat. Some people walk a vehichle some people leap frogs some start on hood some start on roof. It's the end result that counts. And also knowing your product. What someone can do with x brand might have issues with another brand. And the reducer for the conditions. Some conditions the paint will stay wet longer and you have a few extra mins and can paint differently. Other times like hot and humid conditions that may not work and dry spray can happen quickly. Just like with my method I use medium reducer in everything year round. I've learned how to compensate the amounts whether its 40 outside or 120 with heat index. We stay high humidity year round. Lucky if it drops below 60 70 percent even in winter.
You might be painting that truck on your carport but you ain't no stranger to a spray gun, if you are your mama gave you a gift. I see an experience painter. I was trained by a retired UAW painter back in the 80s, he was trained before the automotive robot painters.
Great video. Thanks. I'm new to painting and will be painting Matt over 2 different colours. I don't need to worry about the height difference on the line? There will be more paint on one side right?
Question, I am rewatching this video for the 4th of 5th time, getting ready to do the 2-tone on the VW truck, anyway I have a question about the way you spray clear just want to know why you don't start high and work your way down to the rocker panels, my thinking would be to paint the roof first then work down, but you work from bottom to top, except the tail gate you go top down. Is this just your preference or is there a reason for your clear procedures?
I own a 2002 Infiniti I35 and the paint on it is called (Color Code: AX5Red Pearl Tricoat). I went to the local SW paint shop and asked them to mix the paint for me. They told me that that color is not a tricoat, but a simple base coat with clear coat on top. the paint they gave me already has pearls in it. I don't know who to trust.
Guess the video speaks for itself about the warwick gun q no i must say that base coat covers really nice good work as always my freind pero i came for the review on the clear aqui en vegas we are hitting tripple digit numbers as well pero no creo tan humid como in the big T ! 👍👍
Do you think the tamco gave you enough film build to not have to flow coat where the tape line is? I'm using tamco 2104 and about to do a two tone truck as well and was just wondering. Great video rhe truck looks awesome😀😀. Your a great painter.
Noticed that you left the door handles on the truck. Just wondering if this is ever an issue? I would be scared that the paint would bridge between the handle and door.
Muchas gracias karnal I really appreciate you taking the time out to kick down some knowledge to us that are wanting to learn and gain this skill. You are one of the first videos that I seen and I've subscribed. Where are you located at? I'm in San Anto * TX
@@PHARRAWAY Órale homie puro estilo Valluco es todo! I grew up in Harlingen and been up here in the Tone since 2011. I look forward to learning more from your videos and am considering getting into an Auto Body apprenticeship program that Service King has and continue advancing from there. Nobody ever showed me nothing but you are and for that I am truly grateful karnal. Keep up the good work !
Hi. Glad to you get inside lip area of the bed. You did a video here you used this stuff from an aerosol can on your spray out cards. Instead of using clear coat. Do is not change the color to much? Do you know the name of that stuff or link? Thank you.
Nice video, but just watching makes my arm sore! Lol! On this truck, did you colorsand and buff it out or leave it as it was? I would like to see you colorsand and buff a job. Just subscribed. Tom
no I did not color sand and buffed it and I do have videos that I have shown how to color sand and buffed this is the link ruclips.net/video/XBcOUQyBTCU/видео.html
Hey my friend, could you please do a video showing how to smooth the feel of a two or multi color paint job on say a flat panel, I know you hide it with the clear coat, but how do you get that "like glass" feel??
Thank you .. I’m doing a 58 Corvette and any suggestion on the “white cove” section? Do I paint the white after the body or the body after the white cove.. it’s red and white .. I’m thinking the white cove after the body “red” .. I think in the 50’s they painted the white cove as an option and they did it at the dealers . Thank you ..
Pharraway, You did the right thing, you recognized the problem right away and without a second thought, went straight to a second gun. Re-start without a problem. I saw that and the first thing, I thought “Air inlet restriction” on the cup. I thing we are guilty of looking at it only to make sure what direction and it’s on. We never check on a new one if plastic flashing still in the hole or never drilled.
I love the extra long wood bench you have, it keeps it simple.
Trucks! It might as well be a school bus. Exhausting for base, re-tape, clear. Wow, it should pay more as trucks keep getting taller. I am 6’3”, but you have to watch the bench, the hose, a spot for your hand then reaching, distance, speed, all while watching for dry spots as you plan your next wet edge! You are an athlete or a painting marathon! World Champ! Omaha.
Thanks brother
Thanks for using and reviewing Tamco! We appreciate you 🤘🏻🙏🏻
any time awesome clear
@@PHARRAWAY is that the same clear that spray ways custom use???
@@jackhowlett7413 Yes I believe so
@@PHARRAWAY 👍🏽great video its always good to watch you and others on how you do things in the paint booth get ideas keep up the good work
What color codes are these colors ???
Of course, the prep work is vital to an outstanding finish. However, the reward is when the clearcoat goes on and you see it for the first time. You’re churning out really nice work!
Thank You brother
Great job!! Only thing i start at roof and spray down as so air line don't hit wet sides. Awesome shooting bro.
Thank You brother
That's a bad situation to have...gun problems in the middle of the paint job. I don't blame you at all for finishing the job with the other paint gun. Nice quality work Pharraway 🤝
Thanks, brother yes it sux but oh well 🤝
SprayWayCustoms I always laugh at these people bragging about their harbour freight guns that spray as well as an Iwata or Sata and its $20.... Umm it is until it breaks after two paint jobs. Too many Gimmick guns, Iwata, Sata, Devilbiss and a couple others, the rest are just gimmick garbage. I have cheap guns and iwatas, you have to be on crack to think one of those $50 guns are better in anyway... The packaging isn't even better.lol. I gotta get me a 1.2 Sata 5500X with the I patern next... Bad ass gun!
@@fakegibsonssuck7755 ya I dont even use the harbor freight guns for primer. The only cheaper gimmick guns I like are the spray it33000 and w400 clones. Cartman's on amazon mp version sprays the best I've seen big large air horns like the lv2 aircap. And when it needs rebuilding or parts replaced I order offical iwata parts and it's a direct fit. But in all honesty the w400s and belleria versions can be had for around 170 180 shipped on ebay. The masterpro44 gun is actually a good gun. It's a prolite made for TCP global. Parts swap and it sprays just the same. Only difference is TCP offers full rebuild kits and 1.3 1.4 1.5 and 1.8 tip kits but only offer basically the hv30 equivalent air cap. The gun will use every bit of 16cfm stated with a wide open fan. For 130 for rebranded prolite with complete replacement parts priced properly or 189 for all 4 tip kits and the high flow regulator it's a steal. I wish I'd bought two more of them instead of a bunch of bs guns. Only lower priced guns that have rivaled any of my name brand guns. The cartman h-899 started out on amazon 28 it's now 45 and worth double. It will lay glass just as my name brand prolite or sagola. Its hvlp 2 technology and is a air hog. Beautiful gun, next is the cartman mp400 it's not like the 33000 or the k400 clones. It's basically the RP version great material transfer nice large even tulip fan pattern. The next is the playtu 5500 sata clone and the playtu 5000b rp clone. I'd rather buy 7 of them then one real one. Even the guys at my shop bought some. And all were stunned by the h899 performance. There are a few gems. The Chinese can make a good product when they want to. $5 of CNC metal is 5 of cnc metal a couple ld those guns are just like name brand with a different logo but all else about equal. Even packing and seals are good. Not cheap crap that breaks. I've left solvent in some of those guns for 2 weeks with no seal issues
You make painting look SO easy. You've got a LOT of talent. I have just started learning how to paint and I thoroughly enjoy watching your videos.
Thank you I appreciate it GOD BLESS
I just repainted my hood. Posted a pic on my Instagram. I've learned a lot from watching your videos. I've still got a ways to go but appreciate you sharing your expertise!
@@WJHandyDad Thanks brother you can e-mail me pictures at pharrawaypaint@gmail.com if you like so I can see them
Thanks for making the videos, after watching, and re-watching several of them, I'm working on the courage to start painting a horse trailer project I started. Excellent work!.
Amazing Job. I'm proud to say that's my truck. Cany wait to pick it up. Great work my friend. As always your doing amazing work.
Thanks
Instagram or picturea of the finished product man?
That tape line pull! Impressive. 👏
And watching this had my eyes watering... Good work. Cheers!
LOL Thanks brother it looks worse in camera but its not that bad
That truck looks totally different, great job, I will be painting my first vehicle this week, I hope I’ll become a professional like you, thanks a lot , I’m learning a lot from you.. look me up I will be painting the black truck and I will be painting the 78 Monte Carlo sometime next summer. Thanks..
Good videos no crap music just good spray jobs
for future videos could you please show completed project, you do great work . just want to see completed with all the trim installed and masking removed. you make it look easy for sure
Would definitely loved to have seen the truck unmasked and put back together in the sunlight. As always awesome job brother.
Thanks brother
My friend u have been given a great gift so take care of your health and wear protective gear and mock up a door with filters so nobody reports u cause that will suck but you do some dang good work.
Thanks brother
@@PHARRAWAY Vevor sells Kevlar inflatable booths for $700 to $1200, I've been looking at them.
I too use a self leveling red laser for my straight tape line. First time i figured that i could use my laser here for that I felt like a genius
Best paint video Iv seen . Thank you for your hard work making the video I’m sure it can be tuff filming with flash time
A good tip for everyone, always have a back up gun on hand you never know when you will need it, not worth ruining a good job for not having one.
That is right brother thanks
Love your videos. Awesome stuff. I have read a book about auto painting, been watching alot of youtuve videos and now I am close to giving it a shot. Your videos are very encouraging because you make it look simple. Thanks alot.
Thank You brother
Came out nice! I started using Tamco for the clears and have loved the 4100, 9500, 2104 and recently the 2105 for hot weather. What's amazing about these clear for metal artist. They use a direct to metal resin and it works awesome. I've used the clear like a primer coat before spraying candy over the bare metal. This year I went full Tamco and found I love all the priners and custom colors paints also. Tammy will mix you up any custom color you want and let you name it.. lol.
Nice brother their customer service is the best and products are one of the best out there.
Tamco is the $hlt
That look sweet as awesome job hope my car turns out that nice doing it two toned black top with silver base, airbrushed sides with blood red candy over the whole car .
Carn't wait to see more of your vids cheers from rednutts in Queensland Australia
Excellent video! I enjoyed watching your technique and you are good at what you do!
Man that red would pop with a ghost pearl like a gold over it! Great job.
Yes that sounds awesome but this is the way the customer wanted it
@@PHARRAWAY yeah customer gets what the customer wants😉
Man you make this look easy! Great job man! Look forward to seeing your videos.
Thank you brother
Cool paint job!
Thanks for sharing 💥
Outstanding Job! I a novice hoping to learn techniques like yours great videos. Keep em coming
Thanks
Awesome job. Now I know how to do my car. Thanks!
Everything you do is amazing !!!
When doing a two tone paint how long can tape stay on first paint and any tricks to prevent tape from pulling paint off?
When painting a hood you use the push pull method so that you do t ger a hard line where the paint starts to dry.
no I have never gotten any hard line with this method
More then one way to skin a cat. Some people walk a vehichle some people leap frogs some start on hood some start on roof. It's the end result that counts. And also knowing your product. What someone can do with x brand might have issues with another brand. And the reducer for the conditions. Some conditions the paint will stay wet longer and you have a few extra mins and can paint differently. Other times like hot and humid conditions that may not work and dry spray can happen quickly. Just like with my method I use medium reducer in everything year round. I've learned how to compensate the amounts whether its 40 outside or 120 with heat index. We stay high humidity year round. Lucky if it drops below 60 70 percent even in winter.
You might be painting that truck on your carport but you ain't no stranger to a spray gun, if you are your mama gave you a gift. I see an experience painter. I was trained by a retired UAW painter back in the 80s, he was trained before the automotive robot painters.
Thanks brother
Beautiful paint job
Thank You brother
Awesome job man. I'm wanting to do my Yukon in two tone, black on the bottom and silver on top.
That turned out beautifully! Great job!
Without a doubt. You can paint. You lay down some seriously nice paint jobs. I would love for you to redo my Mustang. Too bad I'm in Jersey
Thanks brother
great job love the two tone and thank you
Thank You
I’m impressed sir. Love the colors.
Thank You brother
that awesome ,loved it
good looking truck, great job!
Awesome paint job!!!
Thanks brother
Awesome Video!!!! Paint looks fantastic!
Thank You brother
Beautiful Job 👍😎
God Bless 🙏
Big job friend.... I love your paint jobs and your great videos... Supeeeerrrr!
What do you think about this clear? Can I find here in Europe?Is it kristall like water?i am looking for clears without yellowish when mixing....
Thanks
@@vasiliskaradimos yes this is where you can get it www.tamcopaint.com
As always you are amazing
Very good job
Damn...looks really great...you always do great work...I hope the Honda comes out half as good. Thanks for the video.
It will brother Thanks 🤝🤝
Good job
Seen a black and orange one only the cab and Hood was 2 tone looked good.
My eyes were burning just from watching this 😆
Great video. Thanks. I'm new to painting and will be painting Matt over 2 different colours. I don't need to worry about the height difference on the line? There will be more paint on one side right?
Question, I am rewatching this video for the 4th of 5th time, getting ready to do the 2-tone on the VW truck, anyway I have a question about the way you spray clear just want to know why you don't start high and work your way down to the rocker panels, my thinking would be to paint the roof first then work down, but you work from bottom to top, except the tail gate you go top down. Is this just your preference or is there a reason for your clear procedures?
Great job bro. Thank you for the knowledge.
I own a 2002 Infiniti I35 and the paint on it is called (Color Code:
AX5Red Pearl Tricoat). I went to the local SW paint shop and asked them
to mix the paint for me. They told me that that color is not a tricoat,
but a simple base coat with clear coat on top. the paint they gave me
already has pearls in it. I don't know who to trust.
I could tell you weren’t too excited, I had bad sputtering on a $30 gun, the tip/nozzle wasn’t sealed via threads 🧵
Yup but oh well Thanks brother
Wow amazing job 👏👏👏👏👏👏👏👏
You are a legend
Looks great, bro!! As always, nice work!
Thank You brother
Very nice job
Thank You
Guess the video speaks for itself about the warwick gun q no i must say that base coat covers really nice good work as always my freind pero i came for the review on the clear aqui en vegas we are hitting tripple digit numbers as well pero no creo tan humid como in the big T ! 👍👍
Yup here to brother this one will be good where your at try it you will not be disappointed
Gonna give tamco a go then 2105 verdad
@@patriot2q2q98 You will not be disappointed brother www.tamcopaint.com
Quedo chingona la trokita ..
I have a 99 durango that im getting ready to paint. Black and red!
Nice good color combo
Buen trabajo amigo
Gracias amigo saludos 🤝
Great job I'm learning a lot thanks
Thank You
You doing a good job but you need to make a full pass never stop on a crack or doorknob bro
Man that looks awesome 😎
Thanks
your gun was spitting..nice job 👍
Beautiful job!
Thank You brother
Do you think the tamco gave you enough film build to not have to flow coat where the tape line is? I'm using tamco 2104 and about to do a two tone truck as well and was just wondering. Great video rhe truck looks awesome😀😀. Your a great painter.
Yes you will have a tape line no matter what but it's not even noticeable, so about the tamco it will build a good film
4.5 mils on average with 3 coats
PHARRAWAY does the tape line leave grooves from the glue on the tape?
Noticed that you left the door handles on the truck. Just wondering if this is ever an issue? I would be scared that the paint would bridge between the handle and door.
No, I have never had any issues with that
Muchas gracias karnal I really appreciate you taking the time out to kick down some knowledge to us that are wanting to learn and gain this skill. You are one of the first videos that I seen and I've subscribed. Where are you located at? I'm in San Anto * TX
south texas RGV
@@PHARRAWAY Órale homie puro estilo Valluco es todo! I grew up in Harlingen and been up here in the Tone since 2011. I look forward to learning more from your videos and am considering getting into an Auto Body apprenticeship program that Service King has and continue advancing from there. Nobody ever showed me nothing but you are and for that I am truly grateful karnal. Keep up the good work !
@@mikephillips8538 Any time brother more videos are coming just pass the word of my channel Will apritiated brother
Taped over the red.what about 3 layer step up of black?
Hi.
Glad to you get inside lip area of the bed.
You did a video here you used this stuff from an aerosol can on your spray out cards.
Instead of using clear coat.
Do is not change the color to much?
Do you know the name of that stuff or link?
Thank you.
No it will not
@@PHARRAWAY
Hi. Was their stuff in an aerosol can to use on spray outs. Instead of mixing up some 2K clear?
Thank you.
looks great nice work....question how do you spray pearl paint ..?..can it be sprayed over any color..?..my car is inferno red....thanks
Yes it can and it will give it a awsome look brother
@@PHARRAWAY ok great keep up the great videos..thank you
Looks amazing.
Nice video, but just watching makes my arm sore! Lol! On this truck, did you colorsand and buff it out or leave it as it was? I would like to see you colorsand and buff a job. Just subscribed. Tom
no I did not color sand and buffed it and I do have videos that I have shown how to color sand and buffed this is the link ruclips.net/video/XBcOUQyBTCU/видео.html
Ol ok it came out slick
Thanks brother
This guy is awesome
Hey my friend, could you please do a video showing how to smooth the feel of a two or multi color paint job on say a flat panel, I know you hide it with the clear coat, but how do you get that "like glass" feel??
subscribed , good quality work you do sir
Thank You brother more to come
I would have done the roof first but I'm just starting out painting.
looks great ..
Thank you! Cheers!
That's beautiful
Thank You
hi i from brasil.beatiful paint.
Thank You
Great job as always.
Thanks brother
Hmmm won't there be a gap between two colors? Should of sand it down after first two layers of clear coat to make it even
Do u have Jon Kosmoski quotes going thru your mind when u spray or am I the only one.
LOL yes I'm a robot
Hay shit happens it is always good to see the good and bad .
Also great to note that you're not alone when it happens to you ?
Nice work brother
Thank you glad you enjoyed it
I would love to see finished product please
Sorry brother the owner took the truck already will do on the next one
Thank you .. I’m doing a 58 Corvette and any suggestion on the “white cove” section? Do I paint the white after the body or the body after the white cove.. it’s red and white ..
I’m thinking the white cove after the body “red” .. I think in the 50’s they painted the white cove as an option and they did it at the dealers . Thank you ..
After all your paint jobs do you cut an buff. How do you have your garage set up for painting air flow
I have some videos showing that
Hello again PHARRAWAY, DID YOU REMOVE THE POT VENT CAP FROM THE SET-UP BEFORE SPRAYING?? BETTER AIR FLOW/FLUID FLOW, THANK,S PJP
Yes
@@PHARRAWAY I never thought of that; thank,s again,PJP
Nice job bro but I have a question after how long you can remove the masking tape in the midle
Great job my frind.
Thank You brother
Good job looks sweet
U r badaass sir 👍 👍 👍
Thank You brother
How to I learn how to do this and fulfill a career while doing it?
Excellent job what kind of paint did you use to do the tape line brother ? Just regular or pin stripe tape?
3m 233+
Did you sand over the red before you painted it black?
No I did not, not necessary
dig the clear, looks slicker than cat shit
which is good
LOL Thanks brother
looks like you holding the gun 4" from the car and spraying the paint i thought it supposed to be 12" sir
How it possible smooth between red and black..wats d technic