Thank you so much for posting this video, I have never painted before but by following your instructions I was able to get a beautiful finish on my first try!
Did you like ws400 more than the other guns you used? What's your thoughts about these gun? i'm between ws400 or sagola 4600 xtreme for clear both are almost at the same price.nice work by the way i like your videos because you have pro results without spraybooth and that is what the people want to see keep doing the good videos👍
Looks amazing man. Thanks for posting. I am gonna paint a 20 navigator that has a ceramic pearl Tri coat. What paint gun did you use ? I am looking into getting the spectrum or black widow from harbor freight. Also did you do sample cards or just compared it to the car piece as you went ?
I need to do this to the bumper on my Mazda 6 in Snowflake pearl mica. I've heard the paint is stupid expensive, so I may just keep rocking the spot of missing paint. lol
PHARRAWAY, Do you put the pearl through a filter before putting it into your gun? Also, what did you mix the pearl into and could a guy put the pearl into the clear?
Great information in these videos. You also reply to your viewers questions and commentary. For those reasons I subscribed. I had a couple of questions in fact regarding this video. Why did you need to apply the adhesion promoter? Because this was a plastic panel? Do you ever need adhesion promoter on a metal panel? And what did you use for the sealer? Epoxy primer? Thanks!
@@PHARRAWAY Ok thanks. Regarding the sealer, I have read where you can use epoxy primer as a sealer. Can you do that? On plastic or only on metal? And I take it then that there is a product that you can buy off of the shelf that says "sealer" on it, just as primer? Interesting ...
Hi great video once again. Is there any reason you chose Roberlo adhesion promoter over the industry norm, Bulldog? I am interested in trying another brand but seems everyone here in Maryland uses Bulldog
Hi, I did a rear bumper cover for 2016 Altima the other day. The code was QAB, but doesn't seem to match up very well. I applied 3 coats of pearl, but it seems to be quite a bit lighter than the rest of the vehicle. The rest of the vehicle seems to have a bronze or gold looking tint to it. Do you think more coats of pearl would have darkened it up, or the alternate they gave me may be to blame?
Sir, i need your talent. I have a 2009 fx35 moonlight white pearl. As i read there are lots of pearls like green to blue, red etc. When i look at my car under the sun i see yellow, like golden colour pearls in it. İ will change my front bumper and it needs to paint. Was that altima's code QAA. İf so, i will show my painter your video. And do you have advise for my colour. Any base colour code etc. Thank you
What kind/color of pearl is this? I'm going to be spraying my 300zx once I'm done all the body work and I want a subtle pearl white paint but having trouble figuring out what pearl I want.
Sealer es un tipo de primer que se aplica a partes nuevas para que te de el color del resto del carro o cuando cambias completamente un carro de color y puedes poner pintura a los 15 minutos encima de el ya que no se lija a diferencia del primer universal y el de relleno que es para cuando hay reparaciones que llevan pasta aislarla de la pintura y llenar imperfecciones a causa de las lijas gruesas que se usan para lijar la pasta si no usas primer encima de la pasta por los quimicos que tiene se chupa la pintura creando una mancha.
I want to extend my appreciation to you for following up on my questions and answering them so promptly when I know you're busy, but then your the man! Thanks again!!
@@PHARRAWAY ok thanks i was scare that i didnt buy enough paint. I have 4 quarts of HOK UK01 brandywine on galaxy silver base coat. U think its enough? 1985 buick regal 2 door just outside no door jams no inside of trunk
Gracias compa Yo estoy usando un pistola china y un deviess straight line. Es lo que puedo comprar. Porque todos los pistolas so re costoso aquí en Australia. El más barato que es profesional no baja de 600 para arriba. Y no tango muchos trabajos para para poder comprar pistolas a esa pecio. Pero gracias por tu información de tu pistolas compa. Tus vídeos son un espiración Sigue siendo tús vídeos compa.
Pharraway, hola saludos... Me encanta su canal cómo me encantaría hablar con usted por teléfono...Tengo también una pregunta, las perlas de midcoat todas esas perlas son las mismas para cualquier color de factoría?
@@PHARRAWAY mucho respeto gracias.. y usted sabe el color de 2018 Mustang Orange fury NL, pues nadie me puede decir cuáles es el polvo perla para ese color...varíos dealer me dicen " son 2-3basecoat orange, con otros 2 midcoat orange diferente y después capa finales de clear....estos dealership dicen no es perla en polvo en midcoat....que opina usted señor ....yo respeto su palabra es usted un genio
All the way from Saudi, I say Thanks for your Vid. It helped me with my truck Project.
welcome brother
Really appreciate the POV style footage, feels very hands on. I touched my phone screen and thought I smeared your paint
I really appreciate your technical help with paint. Thanks James
Thank you for this. And your booth looks nice and tidy. Appreciate the info!
Thanks for watching!
Always teaching, your the best, really nice tricoat job!!
This is a great video on spraying a Tri Coat. Thank you!
Nice to know,your thoughts.on your new gun . Looking forward to seeing you prepare,and the finished job of your car.👌
Thank you so much for posting this video, I have never painted before but by following your instructions I was able to get a beautiful finish on my first try!
Anytime 😊
Beautiful job!!!
Amazing work❤
I have a white pearl paint job in my not too distant future. Thanks for the tips!
Wow Man...that was really good work. Never looks that good with my 2 touch up bottles. LOL
Thank you... Simple and easy to understand and a great finale to your work, well done.
Glad it was helpful!
Beautiful paint job
Thanks for the video bro stay safe and can’t wait for next video!
Thank You,
That was an awesome video.
Just just the help I needed.
Perfect instructor!
Wanted to ask you if there is a good gun to spray clear coat without doing to much cutting after that you might recommend me?
Great video awesome job
Looks good bud. Nice work.
Dope work once again!
Excellent detail brother. Thank you!!
Nice BOSS 😎 love it when you painting
Nice work your a true professional.
Looks good man!!
It came out great
Nice I'll be doing this soon on that 81 c10 I've been working on
You and True Gritt are my Favs!!!
Thanks brother
Nice job , can’t wait to see the charger 👍🏻
it's coming soon brother
Good video keep up the great work!!
Ya me lo chuté en Inglés ahora sigue chutármelo en Español jeje Saludos Pharraway ! Quedó del 1 👏🏻
Nice work bro came out great!
the paint job came out real good i like it , keep it up
Thank you! Cheers!
nice work stay safe
great video
Thanks bro and you & your family stay safe also!
Best video out there. Thank you so much
Glad you enjoyed it!
Hey nice video I am about to spray my van doing the prep work right now hope it comes out as great as yours thanks
You can do it!
Well done Pharraway
Thanks brother
Excellent video thank you
Anytime thanks
Exelente
quedo muy bien
Thank you for the video very informative I have 1? The sealer was it just 1 coat
Your work is second to NONE. Excellent work as always. (What ever happened to All Kandy wet wet?)
Did you like ws400 more than the other guns you used? What's your thoughts about these gun? i'm between ws400 or sagola 4600 xtreme for clear both are almost at the same price.nice work by the way i like your videos because you have pro results without spraybooth and that is what the people want to see keep doing the good videos👍
yes there much better than the other guns
Looks amazing man. Thanks for posting. I am gonna paint a 20 navigator that has a ceramic pearl Tri coat. What paint gun did you use ? I am looking into getting the spectrum or black widow from harbor freight. Also did you do sample cards or just compared it to the car piece as you went ?
Awesome video I need a number for my 13 Altima what are all the products you used exactly only seen you show the adhesion promoter thanks
*Was that your favorite rooster crowing in the background..? Orale*
👍
That looks amazing! What color is the base white coat before you spray the pearl?
Your base coat is on your car stamped on your door plate.Depends on your vehicle type ie: Ford Taurus 2011 UG.Yours may be different.
👍👍👍👍
Thank you. Bout to shoot a front bumper and fender NH788P
👍✌
Do you do a drop coat with pearl like with metallics?
👍👍👍👍👍👍👍
I need to do this to the bumper on my Mazda 6 in Snowflake pearl mica. I've heard the paint is stupid expensive, so I may just keep rocking the spot of missing paint. lol
Never mind saw your 350 z video just need the adative and pearl powder before clear right.
PHARRAWAY, Do you put the pearl through a filter before putting it into your gun? Also, what did you mix the pearl into and could a guy put the pearl into the clear?
great video and your colors looked great. What is the advantage of putting the clearcoat or tricoat?
More protection
Great information in these videos. You also reply to your viewers questions and commentary. For those reasons I subscribed. I had a couple of questions in fact regarding this video. Why did you need to apply the adhesion promoter? Because this was a plastic panel? Do you ever need adhesion promoter on a metal panel? And what did you use for the sealer? Epoxy primer? Thanks!
Yes because it's plastic and about the metal no you don't need the promoter and about the primer it's actually sealer
@@PHARRAWAY Ok thanks. Regarding the sealer, I have read where you can use epoxy primer as a sealer. Can you do that? On plastic or only on metal? And I take it then that there is a product that you can buy off of the shelf that says "sealer" on it, just as primer? Interesting
...
You fk good hombre.
Scuff the bumpers the gray one or the red one.... and I love watching your channel.
you can use the red but the gray will not scratch the plastic that hard
Ok think y ..🙏🙏🙏
i will like to see how you prepare and set up the pearl part
As would I, I can't seem to understand or get any information on the color pearl added to my NL orange fury color from Ford
Hi great video once again. Is there any reason you chose Roberlo adhesion promoter over the industry norm, Bulldog? I am interested in trying another brand but seems everyone here in Maryland uses Bulldog
That's the only promoter I had lol
so you dont lay the pearl coat on very wet?
Do you have any tips for spraying diffrent pearl colour?like gold pearl over nardo gray paint?
Your best deal is to spray a test panel first
Hello sir, what gun are you using in this project and what psi. Thank you.
Got any more pearl white videos? Also, while the darkness of the primer change how bright or dull the white will look?
yes here is the video ruclips.net/video/JQ6MKDEXjF8/видео.html
Great video. Thanks man! One question: do you add reducer to pearl or just spray it in as is? Also do you have to block the primer?
you add reducer
@@PHARRAWAY Thanks! What about sending the primer. Is if necessary for a new body panel?
@@vlads9721 Yes it is
Hi,
I did a rear bumper cover for 2016 Altima the other day. The code was QAB, but doesn't seem to match up very well. I applied 3 coats of pearl, but it seems to be quite a bit lighter than the rest of the vehicle. The rest of the vehicle seems to have a bronze or gold looking tint to it. Do you think more coats of pearl would have darkened it up, or the alternate they gave me may be to blame?
Yes it's best to add a. Bit more
Sir, i need your talent. I have a 2009 fx35 moonlight white pearl. As i read there are lots of pearls like green to blue, red etc. When i look at my car under the sun i see yellow, like golden colour pearls in it. İ will change my front bumper and it needs to paint. Was that altima's code QAA. İf so, i will show my painter your video. And do you have advise for my colour. Any base colour code etc. Thank you
What size tips to use for: base coat, pearl, and clear?
1.3
Chulada de trabajo,la perla la lijo antes de echarla capa transparente o no se tiene que lijar?
No amigo
@@PHARRAWAY muchas gracias amigo
What kind/color of pearl is this? I'm going to be spraying my 300zx once I'm done all the body work and I want a subtle pearl white paint but having trouble figuring out what pearl I want.
Its been a while I painted this don't remember sorry
bro siempre se debe aplicar adhesion promotor y sealer o puede ser solamente el adhesion promotor
Puede ser nada mas adhesion promotor
👍grasias bro entiendo que con sealer queda mejor pero aveses no se puede aplicar todo$
Nice, what did you use for mixing the pearls? Because is not in the color.
the pearl was pre-mixed at the paint supply store just added reducer
Thanks bro!
Chingon como siempre cual es la diferensia del seal y primer o es lo mismo
Sealer es un tipo de primer que se aplica a partes nuevas para que te de el color del resto del carro o cuando cambias completamente un carro de color y puedes poner pintura a los 15 minutos encima de el ya que no se lija a diferencia del primer universal y el de relleno que es para cuando hay reparaciones que llevan pasta aislarla de la pintura y llenar imperfecciones a causa de las lijas gruesas que se usan para lijar la pasta si no usas primer encima de la pasta por los quimicos que tiene se chupa la pintura creando una mancha.
Fernando Saldaña muchas gracias por tomarte el tiempo para esplicar las diferiencias Dios te bendiga y nos proteja y salgamos pronto de la pandemia
is the sealer the same as a primer?
yes but it's not sandable
How did u mix ur pearl, with what and what ratio???
Sorry, don't remember it's been a while back
Great job of instruction - well edited and to the point. One suggestion: write summary of steps in your own comments section. Thanks again!
Great suggestion!
Is the mixing ratio for the pearl the same as base
Yes it is
Hello is the basecoat just a standard white?
Yes
I've had 60 OZ's of Ruby Red Pearl mixed about 5 years ago, would it still be safe to use today?
Thank you.
Still good if air tight
HOW DID YOU MIX THE PEARL
The pear was mixed already
Forgot to ask; Is just under 2 quarts of Ruby Red with pearl enough to cover my Ranchero?
Yes
I want to extend my appreciation to you for following up on my questions and answering them so promptly when I know you're busy, but then your the man! Thanks again!!
question , what kind of Pearl and how much pearl did you put in the base. Give me an amount on the basis to a quart 16 oz. THKS
On the base I added 3 coats of paint and used 32 oz of paint and 16 oz of pearl with 3 coats of pearl
What's the colour code for the white pearl
Thanks
This was done a while back brother don't remember sorry
Hello
Please help me
Can you tell me mixing ratio for white base and pearl?
Thank you
For the base is 2:1 and the pearl is also 2:1
@@PHARRAWAY mix it with hardener? What about clear coat?
@@hossainkhairallah clear it all depends on the brand
Lo vas a subir en español?
si
What tip did you use?
It was a 1.3 tip
@@PHARRAWAY did you add any reducer in the pearl? please subscribe to my channel also.
what kind of sealer you use?Thank you.
It's from Urekem
@@PHARRAWAY Unfortunately I am from Europe.Do you know any product I can find here instead?Thank you a lot....
How many coats or how much coverage can u get out of 1 quart of house of kolor uk01 brandywine on a 1985 regal 2 door.
with 1qt will not be enough you will need 1gal
@@PHARRAWAY i have 4 quarts but im asking how many coats can i get out of 1 quart?
@@streetclasscc5189 oh you will get about 1 to 2 coats depending on the gun you are using
@@PHARRAWAY ok thanks i was scare that i didnt buy enough paint. I have 4 quarts of HOK UK01 brandywine on galaxy silver base coat. U think its enough? 1985 buick regal 2 door just outside no door jams no inside of trunk
@@streetclasscc5189 yes that will be enough
Que tipo de pistola estás usando en esta vídeo??
es una iwata supernova
Gracias compa Yo estoy usando un pistola china y un deviess straight line. Es lo que puedo comprar. Porque todos los pistolas so re costoso aquí en Australia. El más barato que es profesional no baja de 600 para arriba. Y no tango muchos trabajos para para poder comprar pistolas a esa pecio. Pero gracias por tu información de tu pistolas compa.
Tus vídeos son un espiración
Sigue siendo tús vídeos compa.
Can’t make out the pearl colour looks like a gold?
lol yes it's in there
hey do you still have the Sagola 4600 ?
yes it's in storage
@@PHARRAWAY would you sell it
Pharraway, hola saludos... Me encanta su canal cómo me encantaría hablar con usted por teléfono...Tengo también una pregunta, las perlas de midcoat todas esas perlas son las mismas para cualquier color de factoría?
Si amigo son las mismas
@@PHARRAWAY mucho respeto gracias.. y usted sabe el color de 2018 Mustang Orange fury NL, pues nadie me puede decir cuáles es el polvo perla para ese color...varíos dealer me dicen " son 2-3basecoat orange, con otros 2 midcoat orange diferente y después capa finales de clear....estos dealership dicen no es perla en polvo en midcoat....que opina usted señor ....yo respeto su palabra es usted un genio
@@PHARRAWAY fíjese qué no me quieren vender la perla en polvo para este color esta gente.. no sabría usted el part# de las perlas?
Paint gun giveaway MONDAY COOL 😎
Why at 29 psi??
Thank you for another great tutorial mate, why did you use Rubbing Alcohol and not Wax and Grease Remover after Scotch Brighting? 😁
ran out of Wax and Grease Remover lol
PHARRAWAY That is hilarious mate 😂😂 thanks for your honesty 👍🏻😁👍🏻😁
Bumper oops
Why don't you show how you mix your materials, that's pretty important to know!
I have several videos showing that
Didnt sand the primer
Its sealer