Easy Nintendo Switch fan replacement and overheating fix.
HTML-код
- Опубликовано: 27 авг 2024
- In this video, we look at what it takes to replace the fan in an original Nintendo Switch to help solve an overheating issue. We also replace the thermal grease.
Thank you for watching our videos! Please like and subscribe!
Amazon links help support the channel.
Replacement fan: amzn.to/3zUCtal
Thermal Grease: amzn.to/3FpED2M
Some of the parts used in our videos come from Hand Held Legends. please visit link provided as it helps support the channel and you will get a 10% off coupon on your next purchase as a new customer! www.youtube.co....
If you already buy from Handheld Legends, use this link provided below to help support the channel. (the link provides credit to the channel's future parts purchase)
www.youtube.co....
STEM Projects for your kids are a great way to learn: www.kiwico.com...
We are now an Amazon Affiliate. Please use the links below to help support the channel. (Thanks)
Hakko FX-951 soldering station: amzn.to/2RSYkgZ
Some inexpensive hot air stations work great. I use something similar to this: amzn.to/3fCLoVp
or this: amzn.to/2TxnTEG
Bench powersupply: amzn.to/34DUNpe
Kessler Solder: amzn.to/3fFopcf
Low Temp Solder: amzn.to/3grhB2x
Desoldering braid: amzn.to/3gj8hgZ
A smaller spool of braid: amzn.to/2Sp0UeS
Soldering Flux: amzn.to/34PYQ29
Microphone stand used on the Microscope: amzn.to/2RZhi5i
Microscope: amzn.to/2RaHd9N
Jewelers Loupe: amzn.to/3uEnM71
USB-C Power Meter: amzn.to/3g2Po0s
Alcohol Pump bottle: amzn.to/3etZoQj
For your morning Caffeine Jolt: amzn.to/3rbbLWp
Here are links to some of the equipment used in making our videos.
Main Camera, Cannon M50: amzn.to/3uIuRn7
Overhead GoPro Camera: amzn.to/34C0Pa1
Davinci software (Dongle) and Speed Editor: amzn.to/3fDEpeI
Davinci software (key) and Speed Editor: amzn.to/3vOSI5N
The best cheap microphone you can get !! amzn.to/34yCjXo
Light Ring: amzn.to/3fHdDCw
HDMI Capture Card: amzn.to/354VSa3
Some of our camera and video editing gear came from Adorama. You can get a free 1000 points in their reward system by using the link below, and it helps support this channel.
bit.ly/2NiE9qc
Please check us out on social media!
Twitter: / pghgamefix
Instagram: /
Facebook: Pgh Game Fix
The music used in the intro:
Music: Eric Skiff - Chibi Ninja - Resistor Anthems - Available at EricSkiff.com/m...
This video was so helpful my son and I to replace the fan in our switch. Brought it right back to life after constantly overheating. Thank you!
I'm glad my video helped. Thanks for watching.
FANtastic video. Replaced my fan and SD card reader.
Seems my kickstand broke inside and clogged up fan and shorted sd card reader.
Tools in that pack suck, but fan was a Foxconn. Very nice!
Put some Arctic Silver 5 on the heatsink too. Running like a champ!
Glad the video helped.
Thank you for your time and video and help! Highly appreciate it
Thanks! I had to replace my joysticks (left AND right) and when I put it back together the cable for my fan snapped due to it's odd placement and my carelessness.
Now I got my fan fixed, and possibly a new hobby repairing electronics cuz I found it super fun
I got a loud fan will have to give this a try
I’m glad I came across this vid my switch just recently started overheating, I’ve been playing the new yugioh master duel and I get it’s a pretty heavy game, It has to run so many things at once but I don’t think it should be overwhelming the fan to the point where it shuts down the whole thing. I’ll double check on the condition of the fan and If it’s the fan like I think it is I’ll be back on the here to do the step by step cuz I won’t remember how to do it😅
Thanks for watching. It was strange, all of the sudden, in the last few weeks... I've been hit with Switch temp problems, where in the past... they were all fine. A few had bad fans... but I think several were just from hard thermal paste.
Thanks for this video, it was very helpful. I would have liked to see you put the screws back in though as I panicked and wanted to know I was doing everything exactly right haha
First time I've ever taken apart something since my pen in secondary school. Thanks for the help! My fan is fixed :)
My main concern would be accidentally would be cutting through a trace if putting to much pressure cutting the foam strip instead just ripping it. Also depending the if the fan is not truly dead it could be possible to do deep clean on the fan unit. Besides all said and done very good video.
Absolutely... if you aren't comfortable cutting the tape... it will pull up. As far as cleaning the fan... when a customer is paying for it... it's just cheaper to replace it. But for the end use, it is a valid option. Thanks for watching.
I carefully sliced it with the plastic pry tool as I pulled up on the heat pipe. Easy peasy
Followed this step-by-step and my switch won't turn on now. Wondering if there's something specifically I should look for to fix or if there's a wire I might need to check
Just make sure the system has a charge in it. Replacing the fan shouldn't have gotten you deep enough to disconnect anything major.
Very helpful, thank you!
Noticed that you didn't remove the heat shroud on top of the CPU, might want to do that next time and replace the thermal paste on the die.
My nintendo switch its overheating and then turns off, I changed the thermal past so many times but i didnt change the fan (sometimes i feel the hot air but sometimes no) its the fan?
Why don’t you get a cooling fan it sits on top of your switch where the air vent is & it will help keep your switch from overheating
I wanna do this but I’m scared I will break something
Super helpful! Thank you!!!!
I'm glad my video helped.
Mine is overheating too but I don’t how to replace the fan but it has a gadget to sit on top of your switch it’s called a cooling fan, I’m going to buy a cooling fan for the switch
Hi there - after doing this repair, about 8 months later the little plastic grated area around the fan broke and it’s completely an open area. Is there anyway to fix that? Can I buy the plastic casing and replace it?
you can buy a mid chassis and replace it.
@@PghGameFix Cool, thank you! Do you have one you would recommend or get credit for if I purchase through your link?
@@ebivona77 Sure... this should work for you. (Mid and back) amzn.to/3Nqz0sN
@@PghGameFix Thanks!
Can you please fix my Nintendo my thing is completely broken like the whole screen is black I can’t see anything in it has little lines that are colored red green yellow blue purple pink and orange can you please fix it or teach me how to fix it
If you send it into Warpzone in Greensburg PA, (Attn: Tony Ferraro) I would be happy to work on it.
my fan its working but load blowing air ? need fan replace or thermal problem only?
What if the screws get damaged when trying to unscrew, what would you recommend doing then?
Depends how bad they got messed up. If there is nothing left, then you have to drill the heads off.
@@PghGameFix What type of drill should I use?
@@luisumana1238 Somthing very small, and left twist if you can find it. It may grab, and roll the screw out.
@@PghGameFix So like the small screwdrivers with the drill heads?
Do you know the size of the rubber o rings? My original fan just had solid plastic rings on the fan housing, when I installed the new fan it wiggles around and is not completely secure.
They aren't O-rings... they are rubber mounts. You normally remove them from the old fan, and put them in the new one.
Problem for me was the replacement fan had solid plastic rings all the way around for the screws (no openings in the rings to insert the rubber mounts). Pretty much impossible to squeeze the rubber mounts in there and even when I managed after cutting one down a bit, there was no room left for the screw to fit through. So I mounted the new fan without them and we'll see how it goes.
Hello do you know what i need to replace when fan works just on full speed all the time ?
I would do a cleaning, and replace the thermal paste.
@@PghGameFix nope its not that i need to know where is PWM controller
Good afternoon, I followed the steps and the new fan does not kick in at all. What do think it would be. I would appreciate your help. Thanks
It will only come on when it's warm. You can test it with the heat pipe off. If it still overheats, and shuts down on it's own... then the driver for the fan can be shorted.
@@PghGameFix thank you, i will try that.
I replaced the fan in my son's switch a few days ago but it's still not turning on. I've read online that the fan kicks on when it's getting too hot, but others have said theirs runs all the time. Did I get a defective fan or is there something else going on ?
It only runs when it gets hot. If it's not overheating... it's probably fine.
Any advice for stripped screws?
use the right tools. If the screw head is too far gone, all you can do is drill the head off
@@PghGameFix Could you further elaborate on drilling the head off please? Thanks!
You can try putting a rubber band between the screw and the screwdriver, sometimes it will enable a grip.
hello! I watched ur video and i wanted to try fixing it and the link to the fan on amazon before i bought it there was reviews saying that it's very very noisy? Is i true? If so how do i prevent it?
I didn't have any issues with it, and I've ordered a few.
@@PghGameFix oh and what is a fpc connector? that you mentioned im really worried i might forget to connect that part cause im not familar with it 😥
@@orikoz It's the small surface mount connector that the cartridge slot board is hooked to.
@@PghGameFix hi sorry i have another question, im worried that if i fix it myself i'll break it afterwards like after i replace the fan it wont turn on like fully turn on hpw can i prevent that thats my main concern sorry!
@@orikoz Unfortunately, I can't help with that. If you are the kind of person who knows they can't work on small, fragile parts.. you may want to have someone else install a fan. It will be cheaper in the longrun.
How long will the fan last before it fails? I read online that people says 2-3 years before failure and people on Nintendo life saying that their 5 year old Nintendo switch is still working with the original fan still working good with no loud noise or overheating.
Do you know how long the original fan will last?
FYI: I have the 2019 newer model
There is honestly no way to know. I think it has to do with how much you play... and how dusty the environment is that you are using it in. I have a "Day one" switch and there is no overheating issues, and my fan is still running.
@@PghGameFix how many years should I replace the thermal paste?
I have brought a 2019 revised switch with the better battery life last year and hasn't been opened yet and still running fine.
My older switch (I brought in 2018) I sent it to a repair shop for a battery and thermal paste replacement last June (2019)
I just ordered a replacement fan for the older model so I will also replace the thermal paste since I am replacing the fan
I just would like to know how long I should wait until I should replace the thermal paste
@@taylorbaldwin1776 It honestly depends on how hot it has gotten. My "Day one" switch isn't showing signs of running hot... but it's mostly used for casual gamming, and I'm not running graphics intense games for hours on end. If you are using it as your primary system, and are playing FPS on them... then 3 or 4 years, and I would be doing a cleanout, and new paste.
@@PghGameFix well I brought a different fan on amazon yesterday and I got it 5 hours ago and I installed it today for the very first time repairing the switch and the new one is more cooler than the old.
I guess after 2 years since Nintendo replaced it might have been a faulty fan because it was so hot for 2 years and I didn't realize it
@@taylorbaldwin1776 It could happen. I've changed a few fans on low time switches. GLad it worked out for you.
e
Anything for a kid that has no idea how to do this
No sadly. Most of it is opening it which sucks. I'm not repairing anytbing anymore cause last time I did try to fix my bricked wii u I broke the ribbon cable. I gotta buy another one lame. Atleast my switch is almost 4 years old.
I'm going to buy a cooling fan for the switch and hope it works good.
@@crunchyblend8809I am going to buy a cooling fan too it sits on top of the switch’s air vent