How Expert Mechanic's Change Brake Lining of a Caterpillar Wheel Loader Complete Tutorial
HTML-код
- Опубликовано: 5 окт 2024
- How Expert Mechanic's Change Brake Lining of a Caterpillar Wheel Loader Complete Tutorial
#brakepadsreplacement #bestbrakes #howtochangebrakelining
Man I wish I could bless these guys with a Milwaukee impact
Not to mention steel toe boots.
👌
That 4" Makita grinder though!
wouldn't be much use to them since alot of the time electricity cuts out so anything that is with a battery is useless
BRO I WAS JUST THINKING THIS
Hats off to those boys. They were set a quite unfair challenge here, and carried it out while still smiling. That's one dangerous, dirty and tough job there, for which they hardly had any tools at hand. I was kinda expecting Mike Rowe from TV turning up to say "Even I said no to this one!".
Well done, boys !!
You mean Mike ‘safety first ‘ Rowe.
ruclips.net/video/lA19_le1WQgf/видео.htmletu
I didn't see anyone smiling, they looked miserable and bored.
You've never worked hard a day in your life obviously.
@@haylus3636 You wouldn’t know real labor if it smacked you in the back of your lazy ass, boy.
The Snap On truck has never stopped at this shop.
Definitely talented. Imagine providing them with the tools and facility
They probably wouldn't know what half of the kit was for, they'd be like "we just use these" and bring out their old tools they've used for years.
@@rogerferris3720 word to my mother 🅱️
Thats because they dont have the tools if the would have th oppurtunities they probably would have been playing playstation or something like this
That would mean America. These guys honestly are better out in the field than any shop and certified technicians here in the states. Thats a fact! Our country is going to shit people!
They are satisfied with what they have.
No worries about leaving the gear sets out in the windy dirt, very skillful.
Sand and gears go great together
Bearings
sandals
@@Stevesbe those were gears they pulled out..
@@mariomarquez5559 I bet. These guys are very intelligent. I commend their work and ability
@Danger Bear Removes rust and corrosion.
Love the health & safety, steel toe cap sandals and state of the art axle stands. Some really good mechanics here and they don’t let anything get the better of them.
lol
so how did they replace the bearing oil ???
saw it...
ruclips.net/video/lA19_le1WQgu/видео.html u
Lack of clean work area will tell you everything you need to know. Dirt plus tight tolerances are not a great combination. Something tells me they have a lot of repair repairs. Just because they get in done doesn't mean is good or correct.
This is how it’s done, in the third world, many thanks to all who participated!
A little bit of sand mixed in with everything makes the customer keep coming back. LMAO
Love these guys, I remember helping my dad with heavy jobs and getting in there with him. you learn how not to do things which helps you figure out how to do other jobs better, safer, faster,
I cant imagine all that labor and time, just to put the old gear oil back in. Amazing video either way, awesome job guys.
if you paid attention they just changed drum pads... not gears...
@@scrapmetalfab Still a good time to put new gear oil in.
У всех молотки двигающейся ? Спасибо за такое видео вам ! Всего вам самого хорошего и самого лучшего!
These guy's have a work bench , WOW!!!!!!!!!!!
I like how they make use of what they have, and also glad to see the young ones are also interested
It’s always great to see the little ones interested and gaining knowledge.
“Interested” that’s child labor actually but yeah
They gotter done, but I have to say that is the first pimped out cat loader I ever saw. They put the jewels on everything
Definitely talented mechanics. Get them some proper tools and watch them go! The wood blocks are a far cry from safe jacks but they work. Amazing the way they improvise! Love it.
Define what a "proper tool" is, a tool is a tool. If it works it works.
@@collegestudent6071
Ratchets, correct sockets, air tools, cradle, air hammer, compressor, pry bars, etc. I’m talking tools that make the job faster and safer. While a tool is a tool, proper tools make the job quicker and safer.
رجال يعلمون ابنائهم من الصغر 👍🏼👍🏼
👍💯👍💯. Here we are spending thousands and thousands of dollars on tools and these men are using improvised homemade hand tools and probably getting the job done faster. I have worked around CAT'S/HEAVY EQUIPMENT. Most my life. I will NEVER be jealous of another mechanics tools like when I first started. These men are amazing at what they do! OSHA and MSHA amongst others would never allow us to do that in the US. Hats off to all these hard working Men. Could you imagine how much they get paid to compare to how much we get paid for the same job? I really like how they are teaching and passing on their techniques and workmanship to the younger generation.
Вы мастера своего дела! Очень нравится ваша работа!!!🤝👍👍👍
These guys can open a plane engine and reassemble it too if given a chance,
Hard working with basic tools,
Nice teamwork . . 👍
Kenapa kampas rem ga ganti yg baru original
yeah you are right, but I wouldnt like them to work on a plane, there you must work cleaner. No sand in the mechanic parts...
Picking up that hub like that, will make an old man of you ahead of time
Very coordinated team effort. Fast for no power tools.
all work done manually no power tools needed it's truly amazing
Adoro ver esses trabalhos pesados e que vocês fazem um trabalho em equipe maravilhoso, parabéns meus amigos!
ruclips.net/video/lA19_le1WQgf/видео.htmlrt
Sem falar o custo muito mais barato usando criança para um serviço de adulto.. triste realidade q a gente vê
@@Alexmartins.46 what to this is pakistan parents dont have enough money to feed children so they send them to work in the morning teacher will give them tea with bread lunch they eat full stomach then dinner with parents slowly slowly they will learn when they are big till that time they control workshop and teacher just sitting we start learning from childhood we are in grey list with FATF some of children start living in madrisa to learn quran beacuse parents got no food for them they dont have mobile they dont know what is internet some of them get tired of life they cross borders and go to Afghanistan this is our luck life go on like that no entertainment for them.
@@Alexmartins.46 Crianças fazendo o trabalho leve talvez no tempo livre da escola ao invés de estar mendigando ou praticando furtos igual no Brasil.
Despite the old equipment, it is still a good job
Mugatu would be proud of the efficiency of the child labor efforts here.
Great to see the kids assisting and learning.
Nice job! I love their team work.
I believe this to be in Pakistan. I would like to have this address. I would send them some tools.
I have the highest regard for these boys and their Dad.
massive work for a break pad change!
Amazing workers, US kids need to learn value of work like this and not just easy money from mom dad and politicians
Much respect ✊
Hats off to them for squatting like that! My knees hurt from watching them sit like that!
That’s a great team of mechanics. I’d be pleased to work with them, but I’d need some decent boots!
I wouldn't let them within a mile of anything I valued...
@@felixcat9318 raciste
@@botbeamer I spoke of their truly appalling standards of workmanship and their terrible levels of care.
Race had no place in my opinion.
@@felixcat9318 and I still bet they repaired it better than you could.
@@an04ker Of course you do...
I know this place on the road to Hafizabad well. Just next door they do lung transplants. Cheap too.
Я так понимаю, раз сыро, то можно не бояться грязи, которая может налететь в заботливо сложенные рядом компоненты бортового редуктора? Ну, а когда эти ребята заливают везде старое масло - это уже привычно.
Тоже офигел.
Ага, особенно положенный на какую то подложку рядом с песком редуктор, думал хоть бы не заливали старое масло. Залили. Специфика региона видимо.
и только меня напрягло что дети вкалывают по черному, а все только "классные ребята, хорошая работа"
@@antonius54 Да масло то еще нормальное, там на колесе вот годовые кольца стали появляться, вот это проблема будет похлеще.
А так их задача была сменить колодки, на остальное им пофиг
с песочком все работать будет на много лучше 😂
Awesome job you guys . You are a great team . Keep up the good work . Good to see these young kids learning how to do something besides worthless video games .
They are kids, the supposed to be playing video or any games ...
in translation: keep up the cheap work peasants so Dale can benefit from cheap slave labor
We don't need no stinking child labor laws. 🙄
Everyone should know how to think critically, use their hand for working a trade, and have time left over for reading.
@@chucktaylor4958 This is child labour not critical thinking. If you'd spent some more time reading you'd know the difference.
Is this in Peoria Illinois? Good job making use of what you can.
When I think of an “expert mechanic”… I don’t envision a dude showing up in raggedy clothes wearing sandals. 😂
Hey, don't talk about my cousin that way! 🤣🤣🤣
And 13 years old
Good work but they should seriously consider getting a pneumatic or electric impact wrench - at least for the wheel and hub nuts/bolts.
Children are cheaper in this part of the world.
They don’t even have a funil and ask about pneumatic tools?!?!?
Doing it manually saves on the 200lb gorilla armed with an impact wrench stripping threads, mushrooming the heads of the bolts / nuts!
or atleast a ratchet
they are too stupid to put any of the profit into an electric or air impact, that's what a smart person would do. Then the dummies woul;wouldn't know how to charge it or run the compressor so you would need to get them a generator or solar panels. Basically you'd have to do everything for them and show them how to use it. They probably don't even have the intelligence to know such tools exist.
Los felicito que gran trabajo que hacen
Masters Working 💯💪🏼💪🏼💪🏼🙏🙌🏻✌🏻
has its pros and cons of doing repairs in the dirt/work boots would be a nice addition to the work sandals/props for getting the job done
Good job👍 ماشاء الله 🌹
A great job .
Congratulations
Maaa shaa Allah
Buhut mehnati hy ustaad and shagird sab.
Allah subhaanahu taalaa achi sehet aur deen dunya qabar o aakhrat ki kaamyaabian naseeb farmaaye. Aameen Summa Aameen yaaa rabbul aalameen
I was watching that lazy prat at the back of the loader while the kids were doing the work - That is sick man!
Молодёжь помогает молодцы 🙂 👍
Experts without impact tools and safety gear. Kudos!
What's going on with that tire? Did the splice the sidewall from a smaller tire onto a bigger tire?
It's for rock climbing...the extra tread on the sides gets lots of grip when getting between boulders!
Its a recap tire
You should watch their remold tyre production video...
It’s a sidewall of an old tyre put on to protect the sidewall of the actual tyre.
I’m amazed what they can do.
La verdad los admiro como son buenos en su trabajo y lo digo por todos gente trabajadora así en todas las sircunstancias felicidades me gustan todos sus videos y tienen todo mi respeto y luego yo me quejo de mi trabajo que es muy sencillo
Re-using the old Oil?
It wasn't the oil that was broken, it was the brake shoes.😁
Compressed air, puts three guys out of work?
In Pakistan it’s common for the young boys to start learning the trade as a apprentice. They are given minimum wage and food but by the time they are 20 years old they are ready to make a decent living for themselves. Life is hard there if you don’t have specialized education. I am planning to visit next year.
like or not those people dose not joke when it comes to work they are very good team work.
tthose people are doing a fine job with the tools they have iam from canada
Team work 💪 makes the dream work 🙌
7:59 love the little random musical notes
والله العظيم أنكم رجال وأبطال ومبدعين ماشاء الله تبارك الله
God bless you.
Cooperation results of good job!
...so this is how Pakistan produce good skill workers, hat's off
Часто смотрю подобные каналы, Пакистан, Индия и тд. Интересно, авторы этих каналов делятся своим доходом с работягами, или те не бум бум, а автор этим пользуется.
Просмотры хорошие, деньги тоже, можно было бы пневмо инструмент подарить к примеру.
Куда они этот инструмент втыкать будут ? Для его нормальной работы , помимо компрессора нужна еще и маслостанция, а там этим озадачиваться ни кто не станет, обрезок трубы и вороток- в разы надежнее.
@@PoMkA252 Какая маслостанция? Есть лубрикаторы, подключается на подачу воздуха, залил в него масло и все.
Ой да прям, это не совсем каменный век, электричество есть, компрессорами они пользуются.
I'm impressed how they work with the most basic hand tools, but no safety of handling asbestos material
Sois fantásticos mecánicos,enhorabuena.
Men if this in US those boys still considered a child and what they’re doing playing videos and hanging out with friends. Look this I have your respect boy’s growing up the reality of Life ❤️❤️❤️
By the same token, in the USA, large American companies still use child labour just like your above statement and not one single american cares as long as they have their iPhone and Nike clothing.
Here in the states, if you’re driving on IH 35 and you see a couple of 10 year olds removing an 18-wheeler tire, it won’t be 10 minutes before CPS shows up.
You got that right and after CPS was done OSHA would step in and tear a new one in the boss and then the labor department would step in to finish off whatever was left of the company
Do not worry, capital in the West is efficient and will exploit everyone. Fair Labor Standards Act, which governs child labor, makes exceptions to child labor laws for small farms and allows hires as young as 12 for larger ones.
@@kangkim150 I agree with you. I have seen that firsthand, 10 year old boys driving big grain hauling trucks in Washington state. But a 17 year old can't work on large construction projects. The sense that that makes is deranged
Kids need to learn more trades
I like how they recycle the old oil.
Exactly. Why change perfectly good oil?
Без детских зажатых рук это колесо не закрутить !
Children should be in school
Con lo trabajadores que sois, si solo tuvieseis la mitad de comodidades q hay en mi país seríais magníficos jjj saludos
Nothing like child labor and inhaling asbestos fumes for these poor people but they do an amazing job with that they have!!!! These are some very talented mechanics that given a property shop could do amazing work.
MANTAP.....COFFEE MANA COFEE...😀😀
Love these videos- but I imagine that there is a lot of sand and dirt inside parts that should contain 0 sand and dirt
In the brake parts or the people parts?
Very hard working;but short of power tools to make the job easier. For loosening the wheel it looks very dangerous if the wheel falling down? Thanks for hard working .
nice video. Ufaaaaa hard work. I noticed that they work with seriousness and dedication.
Such sanitary conditions for opening up a final drive.
These guys and young boys are true hard workers man for real cuz these guys doesn't have technology and equipments like we have here the states these man do majority everything by hand and hand tools only they ain't got impact guns and all those extravagant things like we have here in the United States and these guys get payed chump change compare to what we make here and it's sad that lots of our workers here complain about hard work and doing this and doing that when there's guys out in the countries like these young men who fuckn work they asses off day in day out and they work together they no complain bout shit. RESPECT TO ALL YOU BOYS IN THIS VIDEO YOU GUYS ARE TRUE HARD WORKERS AND AMAZING TEAM WORK 👏 RESPECT GUYS
best hair in the world 😄
And those are young boys doing hard labor
Assalamuallaikum, i am from indonesia
I recognize that place. Isn’t that a little north of Austin, Texas?
There is a thing called a compressor that device produces air and there is a tool that works with that air and the work is more pleasant.
You should buy it for them
@@fritzsnickerz855 the one who works as a mechanic and does that job that is not cheap anywhere in the world and cannot buy a compressor that is better dedicated to selling bread
@@liomio4980 well im a mechanic and i think you should be in their shoes for a day
Small boys are cheaper than expensive tools in Pakistan.
Sangat menguras tenaga.tapi hasilnya Joss mantap.salut dan hormat sama kalian.salam
Free mechanical engineering digree, no need for paper digree, the man speak himself digree, NOT like westerns got Oxford digree but experience NIL.
True Pakistan 🇵🇰 ♥️
how come they havnt made a ratchet entention half turn with outer tube ? they wouldnt have to keep taking the wrench off and on the lug anymore. if they really are premitive .
I'am wondering if being around all that asbestos dust particles is really that bad for them. They seem to be ok with it.
Probably asbestos free linings, both the old ones and the new, the machine isn't old enough to have old asbestos shoes.
Two things I learned from this video, loader break jobs are a lot of work and I’m never doing one. 😂
A little bit of hard work never killed anyone
Is that tire sidewall some kind of tire repair?
I remember we use a big ratchet the size of the axle. To replace the big disks on the ranch. In south California.
🖐🏽 Bring me on as the parts washer I love it. I need a bench tho cause my knees would be shot by lunchtime
11:40 beware of the brake pad dust, it is toxic....
The least of their problems. Did you see safety attire? Boots, gloves, goggles, ear protection, just to name a few. As a windy day and working outside I doubt dust was a problem.
❤️Wonderful seeing these boys getting their hands dirty, video games are a lose. 👍🏼🙏🏼
Porque en éstos tiempos no cuentan con una pistola neumática todo lo asen apura fuerza y aún así se ve la responsabilidad de lograr un buen trabajo y aún les quedan ganas de sonreír
Those kids god bless them
Us: DEWALT Xr 20-volt Max Variable Speed Brushless 1/2-in Drive Cordless Impact Wrench
Them: Pipe
😆😆😆
Думал откуда там столько детей, если в других роликах их нет. А оказывается они там нужны, чтобы засовывать и закручивать гайки на колесе своими маленькими руками.
Họ làm rất chuyên nghiệp và tiết kiệm . Ở chổ tôi bạ cái gì nó cũng thay .
Respect for what they did under difficult conditions even if they did chip a corner off of one of the new linings. One thing I believe was wrong.
I have never known of new linings to be fitted without being bonded in place by epoxy or such like and I was trained as a heavy plant fitter 54 years ago.
Maybe they consider it a waste of time on those machines with in the field repairs but it is why the previous set broke up in pieces.
I was shocked how young they were but then again I started just after my 15th birthday and we didn't have state of the art tools in the UK then either.
In the USA and Canada many pick up trucks and taxi cab used a riveted set of brake shoes. We called them heavy duty linings. In the 70's it was common like a loaf of bread. Also brake pads were the same, riveted (heavy duty) bonded (standard). Hope this clarifies your query. Cheers
@@caddyrack I don't have a query. I was trying to clarify how it should be done as it was in the 1930's to vehicles then. Bonding and rivets as taught by my father and my 71 year old boss who I had the privilege of working with when I as 15. Call it belt and braces if you like. It stops the shoes falling apart after a quick fix!
Hope that helps you understand why the shoes broke up in the first place. Slightest movement they start to break up.
This must be why those middle eastern kids grow mustaches by the time they turn 13.
The beginning of video was cool. They start them out young.. Just kidding. I was changing tires when I was their age. I didn't turn out half bad.