i did this on mine for the rear bumper like you dud. you actually don't need to cut the tape ! do it in warmer weather or heat it up a tiny bit and just hold your finger down on the curved spot and stretch the tape to match the curved spots. but looks dope bro
Just did mine & the key with this is a heat gun which I purchased on Amazon & boy does it make a difference, it's like someone who wraps their car it's the same concept, it fuses it to the car. My heat gun is cordless give it a try
What you should do is jack up the car so you can spin the tires. Then as the tires are spinning take a small paint brush with red paint and lightly touch it to the rims edge.
I actually tried this last month on my Civic hatchback, but I found out that a heat gun/blow dryer takes out the creases especially when you're doing the curved parts.
Looks better than the actual type R tbh
Looks fantastic and expensive looking , how well does the tape stick after sun and snow ansd tire changes etc?
That’s really nice actually 🎉
That looks awesome!!!
i did this on mine for the rear bumper like you dud. you actually don't need to cut the tape ! do it in warmer weather or heat it up a tiny bit and just hold your finger down on the curved spot and stretch the tape to match the curved spots. but looks dope bro
I making a new video where I'm gonna wrap the whole car.. you don't wanna miss that😉
Just did mine & the key with this is a heat gun which I purchased on Amazon & boy does it make a difference, it's like someone who wraps their car it's the same concept, it fuses it to the car. My heat gun is cordless give it a try
What you should do is jack up the car so you can spin the tires. Then as the tires are spinning take a small paint brush with red paint and lightly touch it to the rims edge.
That pretty dope idea!! I might try that next
What paint should be used?
Did they stay on?
I actually tried this last month on my Civic hatchback, but I found out that a heat gun/blow dryer takes out the creases especially when you're doing the curved parts.
Have you had any issues with it coming off?
4:57 Jack te car and spin the wheel.
Where did you get it?
I can't bend mine it barely adheres l, I cleaned the area I'm beginning to think that its no good coming from amozon
Nice. Website to purchase it?
Nice car
Hate the ricer scratch marks lol.
Haven't found 1 car that looks decent with those things 😂
Can I give you a video suggestion if you want
Sure!
🔥🔥
Ok thanks
It’s hard to keep up in a straight line
Mr. FROM! When u drive it the tires will fall it
Don't cut nothig! Just use a hair dryer to heat the stripe.
Illegal in Fl. NO red or blue…doesn’t matter if it’s not a light
The thing is that when you peel it off you touch it thw glued side, That's why it wouldn't stick ! 🤔 😏
Hi I’m taric
How about
Doing challenges and if you don’t do it
Then you will have to do a forfeit
That's a good I idea!!
I'm always open to suggestions if you have things in mind
Looks really tacky and horrible on the wheels. There is just no good way to make a circle out of straight tape.
🤮
Thanks for the comment 😊
Always one hater
@@ELP1125 I’m sure most people hate it
@@isaacjones7194 judging by the like to dislike, I’d disagree
I really really want to know how long this lasted?