Are 3M Eraser Wheels BETTER Than Cheap Knock Offs?
HTML-код
- Опубликовано: 20 апр 2021
- If you want to remove decals or adhesives to debadge your car or remove the pinstripes on your truck you definitely want to use an eraser wheel. But is the 3M eraser worth three times the money? Should you go middle of the road with a fluted version, or is the budget friendly knock-off good enough? Let’s put all three through the paces and find out how they work and which one you should spend your money on! ↘️↘️Click “SHOW MORE” below to open the full video description! ↙️↙️
⠀
⠀
DISCLAIMER We participate in several affiliate programs that earn us a commission on purchases made through our links at no extra cost to you! ⠀
Some product links are affiliate links which means if you buy something we will receive a small commission. As an Amazon Associate I earn from qualifying purchases.
⠀
⠀
⭐🌟 Check out ALL the products and gear we recommend here: ⭐🌟
📦 www.amazon.com/shop/ganderflight 📦 ⠀
⠀
⭐⭐ Examples of Products Used In This Video ⭐⭐⠀
🔷 ABN Solid Eraser Wheel: amzn.to/3SPBSQJ
🔷 Horus Works Fluted Eraser Wheel: amzn.to/3SZvhDu (Not Recommended)
🔷 3M Solid Eraser Wheel: amzn.to/3ZBN1qI
⠀
🏘️ Join Our Groups Here: ⠀
www.ganderflight.com/groups ⠀
🎁 Find Value In This Video? Buy Me A Coffee:
☕ www.ganderflight.com/coffee ☕⠀
🚐 Favorite RV Gear:
🔸GasStop Propane 100% Emergency Shut-Off: amzn.to/3ZBtN4V
🔸Beech Lane Wedge Levelers: amzn.to/3mrfBww
🔸Fastway Zip 6” Breakaway Cable: amzn.to/3SNh2kO
🔸Motion Sensor LED Night Light: amzn.to/3ZHdyCY
🔸Fastway ONESTEP Wheel Chock: amzn.to/3yhlC1e
🔸8” Clip Fan Rechargeable: amzn.to/3yiOE0t
🔸Portable White Noise Machine: amzn.to/3kK5jHe
🔸Save your back with HitchGrip: amzn.to/3YnITJw
🔸MaxxFan 12v Vent Fan: amzn.to/3YpXVyu
🔸Propane Fire Pit: amzn.to/3yhn4kc
🔸Valterra Twist On Waste Valve: amzn.to/3mld6f3
🔸Latch.It Keyless RV Door Locks: www.ganderflight.com/latchit
🔩 Learn ALL about your RV, take the RV Tech Course Home Study Course:
www.ganderflight.com/rvtechco...
⠀
📖 Read a magazine for RVer’s, by RVer’s!
RV TODAY www.ganderflight.com/RVToday
🛠️ Favorite Tools & Gear
🔸My Everyday Carry Tool - Skeletal CX: amzn.to/3ZGO0Wp
🔸The BEST disposable workgloves! amzn.to/3ZGLiQQ
🔸resqme Original Emergency Car Escape Tool: amzn.to/3ydwCwU
🔸NOCO Boost X Jump Pack: amzn.to/3JaXXpJ
🔸VIAIR 12V Air Compressor: amzn.to/3YtWlMk
🔸the BEST Tire Pressure Gauge: amzn.to/41Pkr6P
🔸The BIG Rearview Mirror: amzn.to/41JbnAt
🔸Infrared Digital Thermometer: amzn.to/3kOUCTK
📸 *Video Gear I Use: amzn.to/3IHWEx2
If you find a “dead link” please let us know! We’ll send you a sticker!
📺 Want to see more of our videos? Don’t forget to subscribe and click the bell icon 🔔 so you're notified when we release new videos!
🎥 Love Gear Reviews? - Watch More!
www.ganderflight.com/gearplay...
🧰 Want more DIY projects? Check these out!
www.ganderflight.com/diyplaylist
🏕️ Watch more RV Life Here:
www.ganderflight.com/rvlifepl...
Connect with us!
💥 All Links www.ganderflight.com/links
🎵 TikTok www.ganderflight.com/tiktok
📷 Instagram www.ganderflight.com/instagram
💻 Facebook www.ganderflight.com/facebook
©️ Gander Flight, All Rights Reserved.
This channel is for entertainment purposes only; we are not experts or professionals. We share our opinions, experiences and what works for us. Please do your own research and make your own decisions.
#ganderflight #debadge #eraserwheel #pinstriperemoval
⠀
pinstripe,pinstripe eraser,eraser,eraser wheel,adhesive remover,3m adhesive remover,3m adhesive eraser wheel,eraser wheel for removing decals,eraser wheel to remove adhesive,eraser wheel debadge,cheap vs expensive,brand name vs knock off,eraser wheels for drill,eraser wheel tool,eraser wheel 3m,eraser wheel for decals,pinstripe car,pinstripe removal,adhesive remover wheel,adhesive remover diy,3m adhesive remover wheel,3m adhesive remover vs goo gone Хобби
I used the 3mm eraser wheel to take off truck badges and decals on my chevy 2014 silverado ltz I took off all my decals in less than one hour.I used a heat gun on low heat and fishing wire to remove all the badges it worked flawlessly.The wheel is the real deal and I used it to take off the excess so you could never tell silverado and LTZ was ever on the truck.I am a firm believer 3mm wheel works !!!! It also did not burn the paint or hurt the finish at all.I used a cordless drill with the 3mm wheel at a low and high speed when ever i needed to.Hats off to 3mm eraser wheel.Follow the instructions on you tube by the professionals.
Great vid. Highlights:
Information density: No fluff, straight to the point.
Scientific analysis: Time, temperature, cost, all well-measured and recorded.
Clear presentation: Good audio and camera angles, good editing.
Thanks for making this, I now know what to do and my time wading through the weeds of RUclips is over.
Thanks for the compliment - that is my goal - to add value and show my experiences.
Thanks Man! This video answered all the questions I had about tackling this job on my own. You just saved me $100.
Glad I could help!
This guy was a first rate scientist. I admire his method.The best RUclips video on the topic?
Thanks for watching Erik!
Thanks for spending all that elaborate time and effort to make the video. Showing all the difference definitely helped me choose the one that works best for me. Kudos for a well done demo it’s much appreciated!
You're welcome Peter!
Now this is how to make a video! I didn’t even need this tool and I watched the whole video. Thanks for good entertainment!
Same here. Very well done. If I had just a few small decals to remove I’d take the cheap one. 3M for sure on bigger jobs. The doug fluted one stays on the bench.
Thank you!!
THIS is how you do a comparison video. well done mate!
Thanks - hope it helped you decide!
Thanks for putting this together. You answered all my questions on the eraser wheels.
Glad to help!
The fact that they didn't burn through the paint is crucial. For us DIYs, time is not highly important ... one minute versus five minutes is no big deal. Your analysis and control of variables was well thought out. The execution was a bit rough but better than I would've done. Bottom line: I'm going to get a cheap eraser wheel. Thanks for your video!
Glad you found the testing and results valuable!
Watch out on bumpers you will burn right through it
Agree. In the end, if I was doing this for a living, 3M hands down. Just need to get a badge of a car every... 6 years? - no brainer. Bonus use (and, I'm sure there are many more) - removing labels from glass jars you want to re-use for other stuff!
My man you just helped me decide now I’m convinced the 3m is what I need !
Glad it was helpful!
Dude. Excellent video! Thanks for taking the time to run this experiment🤙🏽
This was the most helpful thing I have watched this week, thank you!!!! Quality, backyard "science". I love it. Cheers Gander Flight!
Glad it was helpful!
Amazing video and information!! Thank you for making & sharing.
I’d like to thank you for this video bud! It’s nice to see people like yourself take the time to do these comprehensive testing videos!! I can’t thank you enough for this ❤❤❤❤🎉🎉🎉
You're welcome
Wow, awesome comparison. I like the way you checked several variables - time, temperature, damage to paint, residue. I normally don't bother with clicking on affiliate links, but I used yours to buy the 3M. A big "thank you"!
Glad you found the information helpful in making a decision!
You answered all my concerns !
Well done !
Glad it was helpful. Biggest thing is just to keep it moving - the cooler you can keep the surface the better as a general rule when using friction on painted surfaces.
Thanks for posting this man, very informative and useful!
Glad it was helpful!
First I didn't even know this existed until I saw your other video removing the decals, 2nd you answered my next question about which one is better. Thanks for putting out both videos. Now I can work on removing the left over residue left behind from an old vinyl hood decal. I am going with the 3M.
Glad I could help Andre!
Impressed by the nicely done controlled comparison! Great job!
Thanks!
3M it is! Awesome video and testing info...thanks!
You're welcome - glad it was helpful!
Great job! Thanks 4 taking the time 2 help all of us.
Thank you and you're welcome.
This was the most basic and informative video all year long for me. It really brought my 3 choices down to one accordingly to Amazons Top Choices. Shoutout Amazon as well, made my decision simple and easy, along with the helpful details of this video. Amazing Vid!!
Glad it was helpful!
VERY helpful test and answered all of my questions too. Thanks!
You're welcome Samuel!
Great job on your video. Thanks for the comparison and your thoughts.
Thanks for watching and taking the time to leave a comment!
tried both fluted and solid Pro-Tek stripe eraser and worked alrite, but will forsure try the 3m eraser next time after seeing this vid. Thanks
great comparison, practical, weighted, and torture. Nice measures and thanks for sharing!
Thanks for watching!
Wow, well thought out - good job!
Thank you- glad it was helpful
Thank you for this! A very helpful and well thought out video!
You're welcome!
THanks for the thorough review. I have a decal removal project on my RV and this info will help on how I proceed.
Make sure its not an aluminum RV - if it is this will also take the paint off the aluminum since there is no clear coat on top.
Awesome man just the video I was looking for
Glad it was helpful!
Great demo. I have an old dried out one and was looking at these new fluted styles. Looks like I'm buying a 3m.
It definitely performs the best and the difference in price is negligible for how long they last.
Excellent vid. Thanks!👍🏼
great review bra!!! keep doin you!
This was a well done comparison. I canceled my order of the Whizzy Wheel (similar to the Horus) and will go with the 3M wheel. Thank you.
You're welcome! I'm glad you found value in it and it was informational.
Well done excellent value for the viewer!
Thank you!
Really enjoyed your video, well done!
Thank you very much!
I have a 35 ft camper to do I'm going 3M all the way and I really want to thank you for your demo I was dreading doing it where the heat gun it's so slow took me 4 hours to do the front
Time and patience are your friend - go slow and youll be happy with the results.
Absolutely informative and thanks for doing the work and spending the time and money so we can make an informed decision. Nothing is worse then going to the store and buying something that you need to do and you could have done it more efficiently and better if you were aware awareness is the greatest
Glad it was helpful!
That was a great review!
Glad you enjoyed it, hope it helped you make a decision!
Thank you for saving me time and money testing this myself.
You're welcome!
Awesome, just what I was looking for.
Glad I could help Roger!
Just what I was looking for thank you
Glad it was helpful!
Great video. Will prob go for 3M solution based on evidence though fully appreciate your pragmatic approach and non-judgmental conclusion. Thank you.
Glad you found it helpful Robin, thanks for commenting.
Excellent video and very informative. Thanks.
👍 You're welcome!
Top 10 DIY. Great work!
Thank you! Cheers!
If there ever a channel to be similar to its Project Farm. Best comparison videos on RUclips by far. Second is concord carpenter and now third, is this one. That says a lot from all the comparison video channels out there, this joins top three.
Thanks for posting the comparison video! I’m gonna use the 3M wheel to remove the old clear door edge guard protectors from my door and that lower fender protecter too. They are all dried out, cracked, and scratched up.
Let me know how it goes!
Great vid! Learned a lot thanks
Awesome, glad to hear it!
Thanks for this well done comparison. I’ll be spending the extra money on the 3m wheel to take my sticker residue off our boat. Thank you!
Glad you found some value in it.
you da man! thank you for taking the time to help us out..im gonna go with the 3m
You're welcome, glad it was helpful.
same here
Great video! Going with 3m. Thanks!
Thank you for the demonstration. 🖖🏽
You bet!
GREAT video bud 🙂 Cheers Don, Perth W.Australia (Dons Shed and Xplor Overland)
Thanks Don!
Awesome Josh!
Thanks - hope you found it helpful!
I watched both your videos in preparation of removing the old sunburnt and ugly body side moldings on my 2003 Silverado. Your info was very helpful. Used your link to buy the ABN.
How'd the removal go?
@@GanderFlight it worked pretty well. Lots of elbow grease, goof off, magic eraser, then several coats of polish and wax. Still faint outlines in places, but my truck is 21 years old and has lots of love wounds. It looks sooooo much better. I used up about 3/4 of the wheel removing the 8 long pieces of tape.
I’ve had the 3m version for 6 years now. Still in good shape and works fine. I think with this 3m is worth the extra money. You know what you’re getting from 3m. Not so much from the knock offs.
👍🏻
If you are using them for a living, then expensive and reliable is probably the way to go, but for most DIYers, if it takes 3 times as long or more, it won't make a difference.
Thanks so much this was very helpful
You're welcome!
Solid Review!!!
Glad you liked it Gary
Thank you for this video. 3M it is for me. 👊🏼
Glad it was helpful!
Thanks for the video!
Absolutely, hope it was helpful.
thanks for the video!
Thanks for watching
Always money talks. Very informative. thanks.
👍
Thanks for the info. About to go and get a 3m wheel.
glad you found it helpful
Someone's been watching Project Farm. Good video!
Lol I do love Todds videos!
Awesome video!!!
Glad you enjoyed it
Great video!!
Thanks Scott!
I had all of these considered and in cart, I used your link to buy the 3m one.
I think you'll be pleased with its performance
Thanks for posting.
Absolutely!
Very helpful thanks
You're welcome!
Great video Subscribed
Thanks! Hope it was helpful - thanks for the comment
Excellent video, I’m going with the 3m wheel
It'll serve you well.
nice review! thanks for using “the clean car litter” 😂. make it a theme
It was readily available ;)
great test. thanks
You’re welcome hope it was helpful
Excellent video bro. great tests
Thanks!
Super helfpul. THank you!
You're welcome!
Thanks for doing this. I have a whole enclosed trailer to do and it looks like I need to find some 3M ones as the cheap ones I have are taking forever. Some of the decals are chrome and the paint came off with them. That was interesting.
Ooo interesting - was there no clear coat between the paint and the decals?
Nice, very thorough video. I’m thinking about using these to remove silicone sealant from anodized aluminum rims, hopefully the 3M one will work🤞🏼
Report back and let me know how it turns out.
@@GanderFlight ended up spending 45 minutes with a razor blade thoroughly scraping it off. Came off really clean, but very tedious!
The 3M is amazing. Took me 5 minutes to remove the ugly door accents. Seemed worth it to me.
Pretty cool tool huh!?
Great video thanks
You're welcome Jim! Thank you for watching.
Thanks, very helpful
Thanks for watching!
I'm glad I bought the 3M. I have a big decal to remove on my truck and I don't want to take any longer than necessary.
Then you should be good to go! Just keep moving it around - even though I didn't burn through the paint in these tests, anytime you're dealing with paint and friction, heat is your enemy.
I used a heat gun and plastic razor to get a big decal off the hood. Paint was as good as new when I was done. It did take about 4 hours or so though.
the ducks in the intro woke my dog up lol
3m and thank you for the information appreciate it
No problem 👍
Thank you!
You're welcome!
I like the way the 3M disc works.
It definitely performed the best.
Great video dude.... I appreciate the time and effort you went through to make this. Comparison videos are extremely hard and time consuming.
To me the 3M seems obvious. 3 times the money, 4 times faster, and does better work up save on cleanup as well.
Now to figure out where I can buy one. 😁
Thank you, I enjoyed making it and I'm glad it was helpful. You can find all those products on amazon or other online retailers:
🔸 ABN Solid Eraser Wheel: amzn.to/3awqdkN
🔸 Horus Works Fluted Eraser Wheel: amzn.to/3ngYU3i
🔸 3M Solid Eraser Wheel: amzn.to/3xirtlA
@@GanderFlight just picked one up... The price has soared in the past year. They're $50 now. 😱
Got it from the parts store. Got a customer bike and need it now. Gonna put it to the test.
@@TEAMWRIGHTEOUS Yeah seems like everything has been hit with inflation -- that's what happens when the Fed just prints more money....
@@GanderFlight absolutely... They do it because they care. 🙄😂
More pressure, less speed. Peel off the sticker/adhesive versus melting it off. I see it done wrong all the time. Way faster and much less heat/damage. Also, vigorously wash the area first.
The 3M ones are designed to spin at 3500-4000 rpms on a rotary tool
I totally recommend the 3M Eraser Wheel. Great results, just be patient.
👍
Nice tool testing
Thank you!
Good video. In my opinion, it comes down to how often you plan to use the wheel. If this is a one time use or maybe just occasional, the cheaper option is clearly the way to go. If you’re a professional detailer and use this all the time, then maybe the 3M wheel is worth all the extra cost. Thanks!
Agreed - if the extra time is going to cost you then bump up to the 3M.
My thoughts too except not maybe, definitely the 3M for more regular use.
Ya but if we are talking 10$ vs $30 then 30$ is definitely worth it to finish 3x times faster. 1 hour vs 3. But if it was 100$ vs $300 then I would agree not worth it
Amazing thank you
Hope it was helpful!
great video and scientific method 🤓 gonna try this after burning my fingers using a 750 F heat gun on boat cowling decals
Far less burn potential - boat and flesh - than a heat gun ;)
Excellent!
Thank you! Cheers!
I regret not using the fluted one. Took a little bit longer but its way safer.
Safer in what way?
Great video.
Glad you enjoyed it!
foresure the 3m has worked better for m
e in the pass ...this video confirms it...thanks 👍🏻
Right on Jorge!
With the chuck, I was taught by a millwright to tighten the chuck by not cranking just one side but tighten all three in an opposite pattern. Get much more bite out of the chuck.
I'm not sure what you mean - the drill only has one collar that chucks all three teeth at the same time.
@@GanderFlight That is how we learned back in the day of keyed chucks: insert the chuck key in at least two of the holes to tighten the jaws. It will move when you tighten it on the second hole. I assume it is because the gears have some backlash.
@@GanderFlight he has a chuck that needs a key to tighten..I assume you have the kind you just hold the collar and run the drill to tighten. Older drills always had keys.
les is more. Let's go Branton for the win.
Great test. I would have been interested is seeing performance on removing vinyl stripes on fiberglass, like boats or RV
I've seen several folks use these on the front cap of their 5th wheels with no issues - as long as you have a clearcoat. It will absolutely remove the paint on an aluminum sided RV
I’ve found the threaded plastic sleeve on the 3M brand strips, so I’ve been using the cheaper ones !
Oh interesting, thanks for sharing that experience
I don’t know if 20$ is worth saving 5 minutes. Great video. The cheap one is for me!
Yupp - two different trains of thought and a product to support each!
I could see it if it was a small decal.
I have a decal that runs across my entire trunk and down the fenders. That few minutes would turn into an extra hour for my project.
@@Boostedm3nace yeah with big jobs the 3m wheel would pay for itself pretty quick. Small jobs the knock off would be ok.
For a small one time job yeah but if you are gonna be using it more than a few times the 3m is worth it in my opinion
I bought the cheap $10 and it worked great. I did have to apply more pressure than most say to but it worked and no issues with paint.
👍