Damn you made money on this install thats amazing! Seriously though good detailed video - you wanna come to my house and install the brakes for the mustang?
Good morning, video very precise, useful, thank you. I own a 1999 Honda EJ9 Civic VI and I would like to do the conversion, but I don't know where to buy this kit because I'm in Italy. I wanted to ask where can I buy the kit and how high is the adapter plate from the base. Thank you.
Hey Brother, just watched you video, question what kind of disc and calipers did you use? And also what kind of brakes lines and e brake cable did you purchase? Thanks
I just did my conversion last weekend on my '95 coupe. I bought complete rear disc trailing arm assemblies with brakes, lines and cables for $280 on ebay. I replaced the main trailing arm bushing and rotors/pads but I had everything I needed to get the job done
@@ArthurSperotto that doesn't surprise me at all. I'm actually looking for a new shell now to swap all my upgraded suspension, including aforementioned rear disc conversion as well as my JDM H22A swap. Sadly on August 30, 2021 (December 15, 2021 at the time of this reply) I lost control at 55 mph in a fairly sharp curve just outside my hometown, it was bright sunny and dry but what had happened was I had picked up a large screw in my right rear tire; When I took the hard left and the weight shifted right I right away felt it squat too far and It felt to me thinking back back now the wheel rim touched the road due to very low psi. This made me start to fish tail, I tried to regain control but kept slightly over correcting and finally it jerked so hard it ripped the wheel out of my hands. I went across the road started up the hill but this turned into a roll, and halfway into the second roll, while upside down slammed into a tree. I had forgotten my seatbelt leaving the gas station, I broke my back, 2 vertebral compression fractures, just got out of my turtle shell brace a couple weeks back But that day my project car of 12 years died, it hurts just as bad as my back still does. Hopefully I can find another EJ1 / 2 somewhere nearby.
OK bro first of all I have a 95 civic coupe EX.... and all the other videos everybody's getting control arms did you get control arms because in your video it looks like you did it!!! If I get the SI rear brake lines with SI rear rotors and calibers and brackets will it be a direct bolt on please help bro
Hi...I am the dedicate mechanic on my son Acura EL 2000 (canada only)..Wish the undercarriage look like your ! Here in QUEBEC (Canada) salt is the word during winter time... A 5 years old car has all his suspension bushings frozen tight ! Word is: annual rust treatmnet otherwise GOOD LUCK with frozen suspension parts!.
Im kinda curious.. aren't the callipers and brake rotors the same from an acura integra... wont be eazy just to buy the brackets for the callipers and go get some cheap parts at the junk yard i mean imvesting 300 in stopping on a slow car .. dont feel like worth it that much
I have civic 97 dx coupe, i bought integra rear arms but i don't what rear line brakes i need to buy, the arms have the e brake cable already but my car is not abs
What caliper, e-brake cable, and rotor should I be running with this conversion setup bro.. I got a 99 Honda Civic hx right now and wanna try this method out
Nice job on conversion bro. I was just watching how you jacked up car. I don't see jack stands and your legs are under the frame a bit. Be careful. Safety first!
The wear indicator should be at the bottom not the top when installing the inner brake pads, and you forgot to inform on changing the proportional valve, the stock one won't be ok to use, should switch to a 40/40 prop valve
I have a serious question man, if possible for you to answer.. Anyways, I have a 98' Civic CX HB & I live in the mountains of Northern New Mexico. It's a daily driver for me, but just recently I was going home in a canyon on a rainy night and hit a rock on passenger side, bending out my rear passenger trailing arm. Any ideas/help on how I can rebend that piece back, it's about an inch bent out. Thanks Tyler (BYBH)
@@backyardbuilthondas1284 Thanks Man, exactly what I was thinking, just needed more of a Honda guy like you for advice. Gonna try it now, maybe I'll get a come-along and slowly tighten to bend back as I heat it..
@@backyardbuilthondas1284 Yeah, thinking the same thing, but for sure I'll le tyou know. You the man! Thanks again. Looking forward for more Vids of the HB.
ThatCivicKid thanks for the video, I'm probably going to do both front and rear. Front so i can have a bigger rotor to stop with, I'm just wondering if the Spoon caliper will fit if i ever want to upgrade to it in the future.
Quizas no te respondio porque no sabe español pero aqui te dejo el link ,,, scarebird.com/index.php?route=product/product&product_id=215&search=Honda+civic+2000
Hey I got a question where did you get the bracket for the disc convertion on your civic
Damn you made money on this install thats amazing! Seriously though good detailed video - you wanna come to my house and install the brakes for the mustang?
Good morning, video very precise, useful, thank you. I own a 1999 Honda EJ9 Civic VI and I would like to do the conversion, but I don't know where to buy this kit because I'm in Italy.
I wanted to ask where can I buy the kit and how high is the adapter plate from the base.
Thank you.
Lo sto cercando anch'io per la stessa identica auto, l'hai trovato per caso?
Exactly the video I needed. Keep up the good work bro
Very nice. Thanks for the write up. Helped me a lot with my conversion on my ek coup
Nice job.. Could've used teggy disc brakes for the conversion, there everywhere, Offerup, Craigslist etc etc.. But great job.
Nice video bro! But what is the size of calipers and rotors?
Hey Brother, just watched you video, question what kind of disc and calipers did you use? And also what kind of brakes lines and e brake cable did you purchase? Thanks
I just did my conversion last weekend on my '95 coupe. I bought complete rear disc trailing arm assemblies with brakes, lines and cables for $280 on ebay. I replaced the main trailing arm bushing and rotors/pads but I had everything I needed to get the job done
They're $500 on average nowadays :/
@@ArthurSperotto that doesn't surprise me at all. I'm actually looking for a new shell now to swap all my upgraded suspension, including aforementioned rear disc conversion as well as my JDM H22A swap.
Sadly on August 30, 2021 (December 15, 2021 at the time of this reply) I lost control at 55 mph in a fairly sharp curve just outside my hometown, it was bright sunny and dry but what had happened was I had picked up a large screw in my right rear tire; When I took the hard left and the weight shifted right I right away felt it squat too far and It felt to me thinking back back now the wheel rim touched the road due to very low psi.
This made me start to fish tail, I tried to regain control but kept slightly over correcting and finally it jerked so hard it ripped the wheel out of my hands. I went across the road started up the hill but this turned into a roll, and halfway into the second roll, while upside down slammed into a tree.
I had forgotten my seatbelt leaving the gas station, I broke my back, 2 vertebral compression fractures, just got out of my turtle shell brace a couple weeks back
But that day my project car of 12 years died, it hurts just as bad as my back still does.
Hopefully I can find another EJ1 / 2 somewhere nearby.
Jesus I just watched your video (10/23/2022) and I am really sorry to hear this brother hope you feel better and hope you find a new shell
Yessss, I need this if i go disk all round.
Do it!!
Hey nice vid man , but can you put down a link for the conversion kit , thank you
OK bro first of all I have a 95 civic coupe EX.... and all the other videos everybody's getting control arms did you get control arms because in your video it looks like you did it!!! If I get the SI rear brake lines with SI rear rotors and calibers and brackets will it be a direct bolt on please help bro
Do you have to switch the brake lines when doing the conversion?
This is probably a dumb question but rotors & calipers are for si's rear disc ?
Ahah “shut up biird!.. yes I’m talking to you.”
Ok you didn't get control arms cool but I'm looking for the brakets on rock auto I don't see them smh they just have the bolts in the pics
you should swap the inner pads so that the indicator is on the bottom.
Awesome job buddy
Thanks!!
I have a ‘96 civic which brackets should I get it shows 2 “HOV OR CIV”? Thanks bro
Hi...I am the dedicate mechanic on my son Acura EL 2000 (canada only)..Wish the undercarriage look like your ! Here in QUEBEC (Canada) salt is the word during winter time... A 5 years old car has all his suspension bushings frozen tight ! Word is: annual rust treatmnet otherwise GOOD LUCK with frozen suspension parts!.
Can you post a parts list???? Definitely the bracket you used
are rear vented brake rotors too thick for the caliper?
Where did you get the brackets? I have a non ABS LX 98 sedan I'm gonna be converting. Thanks in advance :)
I have question can u put down a link to the kits u got I need It ?
Where did you get the conversion plate?
What type of Calipers and rotors you bought??
Im kinda curious.. aren't the callipers and brake rotors the same from an acura integra... wont be eazy just to buy the brackets for the callipers and go get some cheap parts at the junk yard i mean imvesting 300 in stopping on a slow car .. dont feel like worth it that much
Did you have to change out the trailer arms ?
Where did you get the adapter plate for????
Bad ass vid!
please. disc, pads, link and more are from stock civic with disc??
Nice video! But where is the ABS ring and the sensor?🤔
I have civic 97 dx coupe, i bought integra rear arms but i don't what rear line brakes i need to buy, the arms have the e brake cable already but my car is not abs
Will this work on a Civic eg 1995
nice video bro
Thanks!!
How did you mount the rotor
Hi ! Do you have the référence for the Brake caliper support ,
Ive been wanting to do this on mine
Do it!!
anyone know what the caliper mounting brackets are called or where they can be found?
Hey bro where did you get the parts from ?
Hi where you find out that convertion I have a 2001 civic coupe
Make the hatch look like a ek9 or a jordan
What caliper, e-brake cable, and rotor should I be running with this conversion setup bro.. I got a 99 Honda Civic hx right now and wanna try this method out
99/2000 si is what i used
Appreciated it bro.. keep up the work.. ur work inspires me bro
@@backyardbuilthondas1284 where did you get the kit
Do you have a link or part number for that kit?
Nice job on conversion bro. I was just watching how you jacked up car. I don't see jack stands and your legs are under the frame a bit. Be careful. Safety first!
john he has rims under the car , he’s safe
Why is your fluid not bleeding when uninstall the breaks?
The wear indicator should be at the bottom not the top when installing the inner brake pads, and you forgot to inform on changing the proportional valve, the stock one won't be ok to use, should switch to a 40/40 prop valve
majorkin19 i used the stock one
@@backyardbuilthondas1284 What are your feelings about this setup? Prop valve for drums could have some like 40/20 so for discs is not enough i think.
What about the E brake shoe
where you get this kit at
where do i get the platen for the conversation?
@BackYardBuiltHondas Do you know if this bracket for the conversion will work on an 01 civic lx sedan?
It will not, we are working on a setup that will fit the 2001-05's
Have you made any progress on the 2005 Honda Civic Braket?
Where did you get the hub bracket from? Whats the name used to find that part
scarebird.com/index.php?route=product/product&path=67&product_id=215
I have a serious question man, if possible for you to answer.. Anyways, I have a 98' Civic CX HB & I live in the mountains of Northern New Mexico. It's a daily driver for me, but just recently I was going home in a canyon on a rainy night and hit a rock on passenger side, bending out my rear passenger trailing arm. Any ideas/help on how I can rebend that piece back, it's about an inch bent out. Thanks Tyler (BYBH)
Allen Mtz. U can maybe heat it up and try and bend it back or just get a new or used one that’s not bent
@@backyardbuilthondas1284 Thanks Man, exactly what I was thinking, just needed more of a Honda guy like you for advice. Gonna try it now, maybe I'll get a come-along and slowly tighten to bend back as I heat it..
Allen Mtz. Yea that might work but it might not get back to 100% straight tho but try and see and let me know how it works
@@backyardbuilthondas1284 Yeah, thinking the same thing, but for sure I'll le tyou know. You the man! Thanks again. Looking forward for more Vids of the HB.
Where can I buy those caliper bracket
95 integra you can take parts off too
So you have to buy 2 e brake cables. Left and right?
Correct
Wanna go bigger rotors use mini cooper rotors.
Hey do u have a part number or a phone number ware I can by the kit?
Where did you bought the parts from ?
Rockauto brakes and all and the brackets scarebird.com/index.php?route...
ThatCivicKid thanks for the video, I'm probably going to do both front and rear. Front so i can have a bigger rotor to stop with, I'm just wondering if the Spoon caliper will fit if i ever want to upgrade to it in the future.
Does anyone kno what car the calipers and rotors come from
"pull the cover off"... you mean the drum...? Haha
I have a question what year do I look for the brakes and disc and do i look for si or what?
Jonathan N.Vlogs what year car do u have?
I have a 98 civic 2 dr
can you please send me all the info IE part numbers so i can do the same thank you
Hola amigo me gustó el vídeo. Disculpa me podrías dar el link de donde puedo comprar ese kit de conversión de frenos. Soy de Perú. Muchas gracias
Quizas no te respondio porque no sabe español pero aqui te dejo el link ,,, scarebird.com/index.php?route=product/product&product_id=215&search=Honda+civic+2000
Brother los caliper y discos son los mismos que el 2000 Honda integra cierto?
Please send from where you pay these Kate
how much is the whole kit which website
Ain't worth it. I calculated all that and verse just stick with old Drums + New Parts... I can fix it 2X and still everything brand new !!
can you drop a link from where i can buy this plate
Ain't worth it. I calculated all that and verse just stick with old Drums + New Parts... I can fix it 2X and still everything brand new !!
Yeah but disk looks nicer.
@@stevew.1729 drums are ugly no one wants a big fat ugly shiti drum on a car
why dont you you just change the whole thing? arm with calipers, disk, cables etc, it works from dc2 to eg ek ej bolt on
How do dm you....... i have a question
Fukken Miguel instagram Thatcivickid
Where is the parking brake?
you did not give any info about the hardware involved
Ain't worth it. I calculated all that and verse just stick with old Drums + New Parts... I can fix it 2X and still everything brand new !!
Man this shit's nasty! Found some money though. LOL
So Plan A Steal ..............................??? what the FFFFF
If that dummy can do it this dummy can!
Make the hatch look like a ek9 or a jordan
lol