How to: Install Rough country 3" Suspension lift on 2010-22 Toyota 4Runner

Hey guys in this video I show you step by step how to remove the oem suspension and struts in order to replace them with the rough country 3" suspension lift with N3 premium shocks. If you enjoy the video please like & subscribe it helps me out tremendously!!
Link to parts: www.roughcount...|&||c||fit_first_76631-a
tags: #4runner #suspensionlift #suspension #lifted #liftedtrucks #toyota #sr5 #4x4 #awd #howto #diyinstall #install #diy #hd

[@jameslester4811]

I have this lift installed on my 2017 sr5 rides little bit stiffer so you feel the bumps but nice for more intense compression off roading, you do not need upper control arm tires have not worn……. BUT I’m not sure if it’s a bad part but when you go over a speed bump at 15-20 mph on the decompression or rebound there is a loud bang. .. if someone has had the same problem and has a fix that be awesome.. or could just be a cheaper suspension for a reason

[@WendzDarKnight08]

Now you need upper control arms that allow proper camber for alignment

[@pedropedroza4902]

After installing this kit did you had to buy new upper control arms??

[@WendzDarKnight08]

You would need upper control arms to have proper camber. Otherwise it’ll ruin your tire tread in the long run

[@dariomonteagudogandulla3833]

One question, is your 4runner a 4X4 OR 2W, LIFTS 76631 ARE ONLY FOR 4X4s ACCORDING TO THE SITE THAT SELLS THEM ROUGH CONTRY, WILL THEY FIT AN SR5 2W,,,IT'S MY QUESTION

[@Exoticarflips]

Mine was awd I think you will run into issues in the future installing on a 2wd

[@dariomonteagudogandulla3833]

Could you be more clear in your answer? Could you argue why you would have problems in the future with the installation of this 3-inch 76631 rough country kit in a 4 runner 2019 2w? What is the problem? Would you like to specify? I would appreciate your response.

[@Exoticarflips]

Well from my past experience usually the dimensions and ergonomics of an awd suspension are built for that and the 2wd models have a different set of ergonomics. That being said my advice is reach out to the manufacturer and ask them what they recommend!

[@dariomonteagudogandulla3833]

Greetings, I already installed them in a 2w SR5, they were perfect, very even and the vehicle looks good, level, only I need more weight in the front part, even rough country technicians had recommended it to me, like a bumper and a winch to add weight, so if it remains 100 percent in operation, when I install it I will tell you what the experience is like

[@joshbordo]

Hey where do I get this exact 3 inch lift set up? I can't find it

[@dcmiguel7777]

Do you have a long-term review of this kit?

[@rich_fishangler]

Are you supposed to prime these shocks?

[@dariomonteagudogandulla3833]

Greetings, this kit was installed on a 4 runner SR5 2w because the site tells me that it only fits 4 runner 4x4 .. I don't understand

[@Exoticarflips]

Hello I am not sure the one I installed was on a 4Runner 4x4

[@Lawtypes]

@@Exoticarflipsdid you lift kit settle yet?? And if so how much ?

[@Exoticarflips]

@@Lawtypes settle?

[@Lawtypes]

@@Exoticarflips oh sorry did it get lower after the lift kit was put on. After some miles i just heard it will lower by like a 1/4 in or something.

[@WendzDarKnight08]

@@Lawtypes they usually settle about 1/4 inch after install and a few miles around the block.

[@tristarOffroad]

How do you like the ride?

[@richardgarcia4843]

bien mi pana... gracias por ese tutorial...bendiciones