Vielen Dank für Ihren Kommentar! 😍 wenn dir dieses Video gefallen hat, teile dieses Video mit deinen Freunden ❤️ es wird die Entwicklung des Kanals unterstützen! 📈
@@GoodBicycle Theoretically, on a 6005 bearing, it's perfect. But you need a larger diameter carriage to fit the bearing in the middle. Or a narrower carriage to compensate for the width of the bearing.
@@GoodBicycle If you don't want to press in a new bottom bracket, there are eccentric bottom brackets available with a diameter of around 54 mm. With a lathe, you can use the correct size bearing for your cranks. If you are making the frameset yourself, it becomes even easier.
❤ help the channel get better!
🚀 share this video with your friends
❓ ask your questions
You cleaned that bike like you have OCD. Not that I'm complaining on the great job you did
Diagnosis of work-related disorders😊
Another fine job from a master tech. Thank you
thank you for your comment! 😘
A clean bike is a fast bike!
interesting comment 👍
Половина часу у ваших відео -миття велосипедів)
а шо поробиш) якщо обслуговування, то це чистка старих деталей, та змащювання. Якщо заміна, то мийка посадкових вузлів
Gute Arbeit 💯👍
Vielen Dank für Ihren Kommentar! 😍
wenn dir dieses Video gefallen hat,
teile dieses Video mit deinen Freunden ❤️
es wird die Entwicklung des Kanals unterstützen! 📈
Marketing is a bearing with a small diameter ball. Holovtech need about 6mm and they will last 10 times longer
thanks for the advice ! 😘
@@GoodBicycle
Theoretically, on a 6005 bearing, it's perfect.
But you need a larger diameter carriage to fit the bearing in the middle. Or a narrower carriage to compensate for the width of the bearing.
In real conditions, it will be difficult to do this and it will not be easy to find the cranks
@@GoodBicycle
If you don't want to press in a new bottom bracket, there are eccentric bottom brackets available with a diameter of around 54 mm. With a lathe, you can use the correct size bearing for your cranks. If you are making the frameset yourself, it becomes even easier.
The tools and cleaning products are more costly than those bike components lol
Where can I buy that long rods for the drill to reach these long tubes? I mean that from 5:00
in an ordinary hardware store, and it is also necessary to modernize it yourself
Very good
thank you for your comment! 😘
Eline saglik Birsey soracam ben yeni kadro aldim orta mil yeni iki aydir kullaniyorum tik tik ses geliyor anlamadim bulamiyorum nedendir 😊
Bir video hazırlamanızı, youtube'a yüklemenizi ve bir uzmana göstermenizi tavsiye ederim. belki sorunun ne olduğunu anlayabilirler
@@GoodBicycle cevap icin tesk ama nasil Video cekerim durdugu yerde ses olmuyor, binerken yada sürerken öyle kamera yok bende
What Kind of cleaner you use?
The transparent spray is isopropanol, the orange one is an engine cleaner for cars
what grease do you use on the thread in the sleeve?
For lube, we use thick calcium grease Divinol
ミシミシ鳴るのは、やっぱ砂の混入なんだろな･･･ でもサドルも要因なんだね。今一度チェックしてみます👆
多くの場合、この2つの組み合わせだ。5つのノードが同時にバイクでこのような余分な音を出すことがある。
Wymienilem hollowtech ,serwis korby zrobilem ,mufe wyczyścilem
I dalej klika z okolicy korby:(
Co moge jeszcze zrobić?
należy wyczyścić rurę podsiodłową i wnętrze ramy roweru.
a czasami dźwięk pochodzi ze szprych koła.
lub kierownicy roweru
Sprawdziłem napięcia szprych z przodu i okazało się że jedna szprycha była lużna ,pomogło!!
Nikt na to nie wpadł
Dziękuje Ci✨🚴👍
There is a tool for removing the crank legs 😂
😊
@@GoodBicycle thought I'd warn you before you stab yourself with the screwdriver - I've been their 🤣
체인 청소만 잘하면 된다 기름칠하고. 괜히 BB 손 댔다가 낭패당한다. BB는 대부분 멀쩡하다.
체인에 기름안쳐서 나는 소리가 대부분.
피드백을 보내주셔서 감사합니다! 😘
1:05 фууу 🤣🤣
👍👍👍
😅😅🥲🥵
🤣
😄❤️❤️❤️
Seat tube.....
thank you!!