I've got you beat on not checking the battery. Lol. I swapped an engine in my buddies cavalier cause it was out of gas... took him at his word that it was bad. Couldn't get the new engine to start for 3 days. Throw a gallon of fuel in it fired right up. 🤣 🤣 🤣
@@WalkersGarage6913 what year of Chevrolet Calavier and was 4 cylinder 2.0 or 2.2 or 2 3 or 2 4 4 cylinder , or 2.8 or 3 1 V6 motors also year was it and 2 or 4 door types! I had 1994 with 2.3 litre 4 cylinder motor with 3 speed Automatic transmission 5 seater 4 door and was pure repair bucket case for Winter Season beater!
I like seeing it through Duff's eyes - every rig offers up endless possibilities of mice, rides, and fresh air/head out of the window fun. Brakes and steering only semi required.
This might be my favorite truck that you have picked up! Boat loads of potential! That Windsor is an easy motor to build. The whole truck will clean up well. I hope you do more than one episode on this sweet little pickup.
Always appreciate how much work you put into the video production. The shop work is great and your banter first rate, but it's the stuff we don't see... all the behind the scenes boring action that makes your channel my favorite.
Hands down, this is the best automotive channel on RUclips!! When it’s cold or rainy outside and i can’t wrench on my own shitters I live vicariously through this channel.
All these vehicles you bring back to life is amazing!! It reminds me whenever I was a teenager and was able to work on stuff like that with my dad..I'm now disabled and can't do the work I used to be able to do..Thanks for entertaining me during the day..
Damn it duff!!!!... Your human is one hell of a mechanic!!!!! Be proud, your human is a real mechanic and not one of those RUclips shade tree wannabes.....
Great job, Mortske! That flex plate, torque converter, and even the nuts looked brand new! Must have been sealed up pretty tight for all those years. Get the brakes working, fix the steering, and throw on a new radiator cap, she's good to go! Thanks for the great entertainment, man!
I seriously love how you have multiple engines and trans in your yard outside the shop...lmao That's a TRUE car guy there! I live in a very urban area and I have a scrap car in my driveway...lol
Sweet truck Mr. M! The way I separate a Cleveland from a Windsor is to look at the the water outlet. Windsor's are on the intake, Cleveland on the block. All Windsor's share the same intake except a 351W , they have a taller deck. I know most of your viewers don't like them Ford's, but I have had a 302 in my Willis coupe for over 30 yrs with never a problem, plus the distributor is up front which makes life easier!
Ford cars 57-64 used the tubular cross-member. Believe trucks did too. The motor mounts with the single center stud we're for the same years with Y-block, or FE engines. Later years used a motor-mount with two ears, and a horizontal thruogh bolt to the frame bracket. That 69 351 Windsor benefits from a decent compression ratio(about 9.5), and larger valves than the later ones.
You sure do a lot of work that most of us would give up on. I realize how much work you do for our fun to watch videos you do a great job and that old Ford engine really sounds good hope some Ford guy buys this and keeps on having fun. You and Duff makes a great dog team for winter.
@@MortskeRepair I'd love it but swap it to a manual transmission and make it a 4x4. Of course planning that level of work is almost impossible up here in the Great White North in an apartment parking lot, especially this time of year.
@@MortskeRepair maybe down there in the sunny warm south but not up here living in an apartment in the Great White North. I would need a heated shop and a pile of money for tools and parts, (lmao) both in short supply in my retirement. Really enjoy your work and ethics, Duff's a sweetheart too.
I didn't know you we're looking for the powder puffers channel, not that there's anything wrong width that. There shall be no Man Love here keep your broke back mountain movie's to yourself.
Love it I dropped a 460 in a 64 ford pickup I only had front factory brakes steering was awful and heated all the time . Thanks for bringing back good memories .
There's an oil filter cut open comparison on RUclips... amazing info. Definitely use Wix, or Napa gold filters! You'll see why after you see the video.
26:03 A friend of mine back in HS bought a hotrodded '67 Mustang with a 351c in it. Complained to me that it was noisy, had no oil pressure at idle. I saw a FRAM bomb on the side. Said 'lets put a fresh change of 10w30 and a Purolator on it'. So we did exactly that. Idle oil pressure went from about 6-7 pounds up to 35+, the ticking went away, it started quicker. FRAM bombs are terrible. I only ever use them for range targets.
I'm gonna give that a try on my next oil change. I've always ran Fram filters and my engines always last for me. My oil pressure is low at idle, but like I said the engines just keep running. I just assumed old Ford engines didn't need oil pressure at idle...lol. Anyway, now I'm curious if a simple filter change will make a difference for me.
@@Captain_Yodelstein I use the Motorcraft FL-1a. It's either a Purolator or a Wix depending on who made the batch you buy from, both excellent top shelf filters. And readily available. I can still get them at my local walmart even.
My grandpa (rest his soul) was an old school mechanic for well over 40 years, and Fram was all he used. I myself have used Fram as he did for going on 30+ years now without any issues. That of course was changed religiously every 3000 miles. Perhaps both of us were lucky all these years, and we may have dodged a bullet once, or 500 times. Stranger things have happened. Any of you fellers used royal purple at all? If so does it work well, is it just nothing but snake oil?
My dad used FRAM the whole life without any problems. Even I thought it was the best brand, but today, not so much. Edit: Nice video and ride haha. Edit 2: I love that tach right at the "all rpms" mark lol.
Sweet rig, Mortske. That's a 351W for sure. Likely came out of the same 69 full size Mercury as the radio. 67-72 302 pickup truck motor mounts are what you need. They may have been the same as 73-77, I don't really remember. Those 351 Windsors used to be plentiful and cheap. I used quite a few in bumpside trucks back in the day.
Lots of memories and hum or here! A buddy and I swapped a 390 into his absolutely cherry 1958 F100 in place of the Y block about 1971. He went out and actually bought a motor mount kit for it, and the actual swap went well. Rebuilt the engine to 67-68 Mustang specs, and ended up using stock manifolds. Even installed A/C, and a passenger car 4 speed from a Fairlane GT. The 9" had a 4.11 limited slip. Later addition of power steering was essential, replacing the Gemmer manual box. A Saginaw power steering box from a 75 and up Econoline can be fitted, and use the original Pitman arm, but you need to weld up a little bracket for the box, and install a rag joint. Don't use a car steering box, as the direction is reversed...turn left, go right!
Happy New Year to you, Duff, and the rest of Mortske Repair! Looking forward to more cool and sometimes wacky vehicle revivals, love it! Thank you very much for great video content!
I'm always impressed by the amount of knowledge you have about vehicles and parts. The older I get the more I realize how important it is to listen and learn from people who have so much to teach. Thanks for all the awesome videos and look forward to many more!
One thing to add here, a '69 351w is actually one of the more desirable ones. It's a little bit different than the later engines. Even being a 2v engine, I believe the heads are the same as 4v, just different casting marks. It may also have some desirable rods in it. Back before aftermarket blocks, this was the one to have.
Actually the Cleveland 351 is the more desirable because they have the large port heads that breath well with the valves canted instead of being side by side like the Windsor does . Most of the Windsor engines were casted in Canada & the Cleveland's made here in the states . As for Fram oil filters I have been using them for well over 30 years & haven't had a bad one yet but I have had 1 wix that the anti drain back valve was stuck open on my chevrolet 5.3 LS that was causing lifter noise on start up until I bought another wix then cut the old filter open & found the problem . Way back in the day Fram was the only filter you could buy that was the HP filter that was made with a thicker canister & better stronger filter to use for drag racing on the top fuel nitro engines where those engine pump very high oil pressure to keep the babbitt style crank bearings alive in those 10,000 HP billet aluminum Hemi style engines . I am sure wix probably has already copied these as well not that long ago but Fram was the first to make those style filters because a standard oil filter will fail & burst from the pressure so Fram developed them . If you want to see something cool look up top fuel nitro fuel pressure stages where they have a Hemi cylinder cut so it's just the intake & exhaust port blocked off with thick clear plastic so you can see how much nitro is being pumped in at idle then as it takes off for it's run at WOT & it's amazing how much fuel just one cylinder is pumped through which just at idle stage would drown even a pro stock engine .
It's that time of year again for Mortske Repair battery donation marathon! Duff is standing by to take your donation calls. Even though he doesn't have thumbs.
Hey Mortske & Duff. Great video as always. Definitely no mistaking big and small 351's. That definitely is a 69 351 W. You mentioned possibly removing some spring leaf's and perhaps lowering the old pick up. Have you ever considered doing a project re-arching or de-arching leaf springs on something you want to raise or lower without spending a fortune on it? I have done it many times using a press and a jig I made to suspend the leaf's. It takes a little time and some new center bolts but works really well especially to fix some sag on one side. There are some good video's on RUclips showing different ways to home bend leaf springs. It's 68 here today. That road test you and Duff did made me cold just watching it. Hope you guys have a great new year my friend. Until next time.
I've re-arched a few springs. By using the press method. Never the hammer method. I picked up an old roller for making steel hoops for wood wagon wheels that I'd like to try repurposing for this matter. Just haven't gotten that far. Have a good one Bob!
I have a couple of friends who build engines and their shop voids engine warranty if you use fram oil filters.. they have had quite a few failures due to the inside collapsing and killing oil pressure
That driveshaft is perfectly stock. In the mid 60's ford used a 2 piece shaft vulcanized with rubber between the shafts to quiet the drivetrain . They used them on fairlanes and merc counterpart mid sized cars for sure. You have terrible flat spots which is likely the vibration.
Brakes nah,steering nah ,tyres nah ,snow and cold freezing weather haha Duff and Mortske just laugh at it all !!. Lets go for a drive Duff ...on the plus side if your feeling cold i hear Puddin is having a barbeque ...lol
Finished watching this first episode of 2022! It has everything a Mortske video should have! You took the starter off only to find that the battery was down to 7 Volts and you didn't edit the whole fiasco out! The seller claimed that it had been a drag truck; with a cobbled up driveshaft, a single 2 barrel carb, a Windsor 351 (well the cubes were accurate) rather than a Cleveland, an open 9.5" diff, no way to get brakes and "Kill you quick" stiff and semi-connected steering. Yeah right Dude, tell me another! It's almost enough to make a guy stick to repairing Japanese and Korean econoboxes and the occasional pickup truck! Only thing is, repairing that crap would put you to sleep or drive you to drink stronger than "sammiches" or both! Duff had a love/hate relationship with this Ford refridgerator. He loved the comfy bench seat and the exciting ride but thot fixing it was boring. Yep, a totally Mortske classic! Bodes well for the rest of '22.
I owned a 1960 pumpkin orange with black hood panels detail and pin stripes. same seat color reupholstered, rolled & pleated, black dash with (Go for it) in slime green decal. 312. Bad ass three in the tree. Damn thing was wicked. vibrated in gear, all hydraulic brake and clutch. I did not build it. The body work was done by a Guy named Larry Logston, from Maryville, Illinois. He put a lot of time in it. I got it in 1982, paid 900 hundred for it. Brakes blew lines and it sat, I had to part with it, someone like you picked it up on a farm field for a song. Along with a my 66 VW. with sun roof. Had much fun with both vehicles.
Favorite year model Ferd. Great little truck. 351W is a taller deck than a 289/302 so the intake is an inch or two wider, easy way to tell. A lot of kroil is always better.
Duff is not having any slander against the old hot rod haha, bad ass rig though and the windsor is an awesome engine we had a lot of fun with them when we would put them in the old broncos.
Congrats on 80k. I was watching your live broadcast on Saturday new years and you helped. Another RUclips guy hit ,100 k. What a guy. Smack the like button every time like I try to do!!
Inspector duff failed the inspection right at the beginning of the vid when he barked!! He usually reserves his over all findings until the end!! Good eye duffske!!! I'm surprised he didn't lift a leg!! Thanks for sharing captain!!
Duff is the best! Such a good boy. Enjoy all your videos. I,m particularly interested in 57 F100. My dad had one and I think they were the best . Such heavy sheet metal .
Yeah Ford,...somebody got a nice project truck....Woooohoooo....that test drive was scary,...I imagine that straight axle was wobblin around cuz no bushings in those springs...Thanks for another fun episode.
When you first went under the "Scamp", I thought Boomtube had a bit of work.... but then the driveshaft!! Duffs impersonation of Scooby Doo was bang on. Great start to '22. Thanks.
I've got you beat on not checking the battery. Lol. I swapped an engine in my buddies cavalier cause it was out of gas... took him at his word that it was bad. Couldn't get the new engine to start for 3 days. Throw a gallon of fuel in it fired right up. 🤣 🤣 🤣
NO WAY!
@@MortskeRepair sad but true! 😆 at least he paid for the samich's required for the headaches. 😆
Really on Chevrolet Cavalier car ?
@@AndrewHCann yup
@@WalkersGarage6913 what year of Chevrolet Calavier and was 4 cylinder 2.0 or 2.2 or 2 3 or 2 4 4 cylinder , or 2.8 or 3 1 V6 motors also year was it and 2 or 4 door types! I had 1994 with 2.3 litre 4 cylinder motor with 3 speed Automatic transmission 5 seater 4 door and was pure repair bucket case for Winter Season beater!
You always get a thumbs up from me before I even watch the video! You make Monday mornings something to look forward to, thanks!
Rude not to I have liked thousands of videos I have watch even if the video was bad 😁
I do the same thing. Press play click like and enjoy the show.
Same
I like all to just to tell me which ones I've watched..plus to support the channels..no reason not to
That’s about right. I know I’m gonna love the video every time
The spider....special kind of evil there Sir...well played!!
Thanks!
I like seeing it through Duff's eyes - every rig offers up endless possibilities of mice, rides, and fresh air/head out of the window fun. Brakes and steering only semi required.
Duff and CTR. ANNEABELLE SHOULD. DO. A CRITTER HUNT ON THEIR. CARS
Duff laughs at brakes and steering he needs excitement in his life
You don’t need brakes, they’ll only slow you down
Thank God for Mondays. These videos are life affirming.
This man works so hard. Just unreal the time and energy! Thank you Mortske.
This might be my favorite truck that you have picked up! Boat loads of potential! That Windsor is an easy motor to build. The whole truck will clean up well. I hope you do more than one episode on this sweet little pickup.
Best square body by far. 55 Chevy Cameo 2nd. But the 56 F100 is Icon of the industry.. I have all 3 😁
I agree. Out of all mortskes’s vehicles this is the one I want to own. Already has the best engine ford ever made in it
@@amazin1827 l hate you!!!😁JK
Have fun with those cool rides 🤘👍🇺🇸
I hate you too!
Always appreciate how much work you put into the video production. The shop work is great and your banter first rate, but it's the stuff we don't see... all the behind the scenes boring action that makes your channel my favorite.
Thanks much Michael!
Between Mortske and Puddin I really don't need any other "will it run ?" videos. Keep em coming guys..
Can't wait for your quality content every Monday!
Hands down, this is the best automotive channel on RUclips!! When it’s cold or rainy outside and i can’t wrench on my own shitters I live vicariously through this channel.
Much appreciated!
All these vehicles you bring back to life is amazing!! It reminds me whenever I was a teenager and was able to work on stuff like that with my dad..I'm now disabled and can't do the work I used to be able to do..Thanks for entertaining me during the day..
Damn it duff!!!!... Your human is one hell of a mechanic!!!!! Be proud, your human is a real mechanic and not one of those RUclips shade tree wannabes.....
Thanks much Thomas!
nice to get some ford content on the channel, lets see if this one isn't solidly rusted! Thanks for the long video!!
Mondays with Mortske. It makes Mondays much better. Thanks!!!
Great job, Mortske! That flex plate, torque converter, and even the nuts looked brand new! Must have been sealed up pretty tight for all those years. Get the brakes working, fix the steering, and throw on a new radiator cap, she's good to go! Thanks for the great entertainment, man!
I seriously love how you have multiple engines and trans in your yard outside the shop...lmao That's a TRUE car guy there! I live in a very urban area and I have a scrap car in my driveway...lol
Heck yeah!
Sweet truck Mr. M! The way I separate a Cleveland from a Windsor is to look at the the water outlet. Windsor's are on the intake, Cleveland on the block. All Windsor's share the same intake except a 351W , they have a taller deck. I know most of your viewers don't like them Ford's, but I have had a 302 in my Willis coupe for over 30 yrs with never a problem, plus the distributor is up front which makes life easier!
302 is the best engine Ford ever made so reliable
I love the fords. Building a 460 for a buddy. I love GMs and Chrysler too. Love em all for different reasons
I love the Fords too. I have 27 of them.
@@mikeschriever1034 my daily driver is a 74 Lincoln MK4
Ford cars 57-64 used the tubular cross-member. Believe trucks did too. The motor mounts with the single center stud we're for the same years with Y-block, or FE engines. Later years used a motor-mount with two ears, and a horizontal thruogh bolt to the frame bracket. That 69 351 Windsor benefits from a decent compression ratio(about 9.5), and larger valves than the later ones.
Cool ol truck that you don't see many of. Thanks for all the cool things you do for us RUclips folks! Starting out 2022 right watching mortske!!!!
Our pleasure!
You sure do a lot of work that most of us would give up on. I realize how much work you do for our fun to watch videos you do a great job and that old Ford engine really sounds good hope some Ford guy buys this and keeps on having fun. You and Duff makes a great dog team for winter.
I hope someone buys it!
@@MortskeRepair save the shop!
@@MortskeRepair I'd love it but swap it to a manual transmission and make it a 4x4. Of course planning that level of work is almost impossible up here in the Great White North in an apartment parking lot, especially this time of year.
@@unknownsoul13 Sounds like a weekend project!
@@MortskeRepair maybe down there in the sunny warm south but not up here living in an apartment in the Great White North. I would need a heated shop and a pile of money for tools and parts, (lmao) both in short supply in my retirement. Really enjoy your work and ethics, Duff's a sweetheart too.
Just love how Duff makes that bench seat his own. He got comfortable very quickly in (t)his ride!
Man I'd love to see you and Duff build a project up, like a build series. Budget hot rod? Nothing too fancy.
Man of love? The hell?
I didn't know you we're looking for the powder puffers channel, not that there's anything wrong width that. There shall be no Man Love here keep your broke back mountain movie's to yourself.
Haha sorry the of should be "I'd". Easy guys calm down.
@@mattewiegand9896 edit it then.
Cool! Duff is a great judge of vehicles. If he hunkers down in the front seat, you know its worth putting a little effort into it!
Great vid bro 👍
Love seeing these old survivors brought back to life 😎👍🇺🇸
This truck is probably what my motor came out of that's in my 48 bus. It's a 1957 Y-block in it now. Cool Hot Rod Truck!
This should be a keeper!
At Logon Boyer. YES, A Very Rare F100 truck.
Thank you for finally getting to the fridge. I’ve been patiently waiting. Excellent video.
Thanks much!
Cool truck man! You always seem to find the best.
Love it I dropped a 460 in a 64 ford pickup I only had front factory brakes steering was awful and heated all the time . Thanks for bringing back good memories .
Cool rig!
There's an oil filter cut open comparison on RUclips... amazing info. Definitely use Wix, or Napa gold filters! You'll see why after you see the video.
Watching Duff listen to you is so funny,you KNOW he knows just what you're saying!Dogs sure are funny people.
sure are!
26:03 A friend of mine back in HS bought a hotrodded '67 Mustang with a 351c in it. Complained to me that it was noisy, had no oil pressure at idle. I saw a FRAM bomb on the side. Said 'lets put a fresh change of 10w30 and a Purolator on it'. So we did exactly that.
Idle oil pressure went from about 6-7 pounds up to 35+, the ticking went away, it started quicker.
FRAM bombs are terrible. I only ever use them for range targets.
I'm gonna give that a try on my next oil change. I've always ran Fram filters and my engines always last for me. My oil pressure is low at idle, but like I said the engines just keep running. I just assumed old Ford engines didn't need oil pressure at idle...lol. Anyway, now I'm curious if a simple filter change will make a difference for me.
68 289 same issue and put a wix on it. No more knock
@@Captain_Yodelstein I use the Motorcraft FL-1a. It's either a Purolator or a Wix depending on who made the batch you buy from, both excellent top shelf filters. And readily available. I can still get them at my local walmart even.
@@TestECull, thanks for the info. Might just pick one up on the way home from work.
My grandpa (rest his soul) was an old school mechanic for well over 40 years, and Fram was all he used. I myself have used Fram as he did for going on 30+ years now without any issues. That of course was changed religiously every 3000 miles. Perhaps both of us were lucky all these years, and we may have dodged a bullet once, or 500 times. Stranger things have happened. Any of you fellers used royal purple at all? If so does it work well, is it just nothing but snake oil?
You have all the luck with Fords. Like steering a Minneapolis Moline combine. Great show.
Poor Duff couldn't stand having to wait to do his walk through on the interior! 😂 He's a good boy!
It would com with a 300 strait 6 engen
Wrong.... Ford never introduced the 300 until 1965. Mortske was right when he said either a Y-Block, or a 223 I6 would've came factory.
The long video revivals are great to watch and learn something every time 👍
My dad used FRAM the whole life without any problems.
Even I thought it was the best brand, but today, not so much.
Edit: Nice video and ride haha.
Edit 2: I love that tach right at the "all rpms" mark lol.
Sweet rig, Mortske.
That's a 351W for sure. Likely came out of the same 69 full size Mercury as the radio.
67-72 302 pickup truck motor mounts are what you need. They may have been the same as 73-77, I don't really remember. Those 351 Windsors used to be plentiful and cheap. I used quite a few in bumpside trucks back in the day.
Good info Tom!
Lots of memories and hum or here! A buddy and I swapped a 390 into his absolutely cherry 1958 F100 in place of the Y block about 1971. He went out and actually bought a motor mount kit for it, and the actual swap went well. Rebuilt the engine to 67-68 Mustang specs, and ended up using stock manifolds. Even installed A/C, and a passenger car 4 speed from a Fairlane GT. The 9" had a 4.11 limited slip. Later addition of power steering was essential, replacing the Gemmer manual box. A Saginaw power steering box from a 75 and up Econoline can be fitted, and use the original Pitman arm, but you need to weld up a little bracket for the box, and install a rag joint. Don't use a car steering box, as the direction is reversed...turn left, go right!
Sounds like a pickup I’d love to find!
Happy New Year to you, Duff, and the rest of Mortske Repair! Looking forward to more cool and sometimes wacky vehicle revivals, love it! Thank you very much for great video content!
Same to you Mark!
I'm always impressed by the amount of knowledge you have about vehicles and parts. The older I get the more I realize how important it is to listen and learn from people who have so much to teach. Thanks for all the awesome videos and look forward to many more!
Shoot. It’s all useless knowledge I got!
One thing to add here, a '69 351w is actually one of the more desirable ones. It's a little bit different than the later engines. Even being a 2v engine, I believe the heads are the same as 4v, just different casting marks. It may also have some desirable rods in it. Back before aftermarket blocks, this was the one to have.
Thanks for the info!
@@MortskeRepair now if you can get a 351 c. Things wood roll
Actually the Cleveland 351 is the more desirable because they have the large port heads that breath well with the valves canted instead of being side by side like the Windsor does . Most of the Windsor engines were casted in Canada & the Cleveland's made here in the states . As for Fram oil filters I have been using them for well over 30 years & haven't had a bad one yet but I have had 1 wix that the anti drain back valve was stuck open on my chevrolet 5.3 LS that was causing lifter noise on start up until I bought another wix then cut the old filter open & found the problem . Way back in the day Fram was the only filter you could buy that was the HP filter that was made with a thicker canister & better stronger filter to use for drag racing on the top fuel nitro engines where those engine pump very high oil pressure to keep the babbitt style crank bearings alive in those 10,000 HP billet aluminum Hemi style engines . I am sure wix probably has already copied these as well not that long ago but Fram was the first to make those style filters because a standard oil filter will fail & burst from the pressure so Fram developed them . If you want to see something cool look up top fuel nitro fuel pressure stages where they have a Hemi cylinder cut so it's just the intake & exhaust port blocked off with thick clear plastic so you can see how much nitro is being pumped in at idle then as it takes off for it's run at WOT & it's amazing how much fuel just one cylinder is pumped through which just at idle stage would drown even a pro stock engine .
It's that time of year again for Mortske Repair battery donation marathon! Duff is standing by to take your donation calls. Even though he doesn't have thumbs.
Haha
Hey Mortske & Duff. Great video as always. Definitely no mistaking big and small 351's. That definitely is a 69 351 W. You mentioned possibly removing some spring leaf's and perhaps lowering the old pick up. Have you ever considered doing a project re-arching or de-arching leaf springs on something you want to raise or lower without spending a fortune on it? I have done it many times using a press and a jig I made to suspend the leaf's. It takes a little time and some new center bolts but works really well especially to fix some sag on one side. There are some good video's on RUclips showing different ways to home bend leaf springs. It's 68 here today. That road test you and Duff did made me cold just watching it. Hope you guys have a great new year my friend. Until next time.
I've re-arched a few springs. By using the press method. Never the hammer method. I picked up an old roller for making steel hoops for wood wagon wheels that I'd like to try repurposing for this matter. Just haven't gotten that far. Have a good one Bob!
A red truck in snow in the festive season. What else could look right this time of year. One again, thank you for the video👍
I have a couple of friends who build engines and their shop voids engine warranty if you use fram oil filters.. they have had quite a few failures due to the inside collapsing and killing oil pressure
Duff - he feckin loves that snow!
Gotta love McDuff makes me smile to see how happy he is to go for a ride :)
That driveshaft is perfectly stock. In the mid 60's ford used a 2 piece shaft vulcanized with rubber between the shafts to quiet the drivetrain . They used them on fairlanes and merc counterpart mid sized cars for sure. You have terrible flat spots which is likely the vibration.
Would that be room temperature vulcanization cream? VGG
That’s pretty cool I did not know that
Not to mention the huge dent in the drive shaft.
Yep. My 63 Fairlane had a 2 piece drive shaft like that. Rubber between the 2 to dampen vibrations.
Another great Ford idea..."Let's stuff the shaft in rubber ...then we don't have to balance it". hahahahaha
Mortske, you and duff have so much fun. That 57 didn't work you too hard. It's a good old Ford 100 . Thanks for sharing. Have a great week 😀
Thanks, you too!
I guess "drag truck" could mean a lot of things to a lot of people...
You mean it's a cross dresser?
Drag queen?!?
He probably did drag it on the trailer
LOL that's why he sold it to Mortske......He got tired of draggin it around....
Was the guy he bought it from wearing a dress?
Brakes nah,steering nah ,tyres nah ,snow and cold freezing weather haha Duff and Mortske just laugh at it all !!. Lets go for a drive Duff ...on the plus side if your feeling cold i hear Puddin is having a barbeque ...lol
We ain’t real bright!
Yep. Watching this again. Great videos often deserve another look. I might learn something
Much appreciated
As always another great video. Mortske Mondays are the best!
Great video glad you posted keep them coming thanks
Mortske Mondays!! You can’t beat em.
Loved the split-screen on the "joy ride"!
Finished watching this first episode of 2022! It has everything a Mortske video should have! You took the starter off only to find that the battery was down to 7 Volts and you didn't edit the whole fiasco out! The seller claimed that it had been a drag truck; with a cobbled up driveshaft, a single 2 barrel carb, a Windsor 351 (well the cubes were accurate) rather than a Cleveland, an open 9.5" diff, no way to get brakes and "Kill you quick" stiff and semi-connected steering. Yeah right Dude, tell me another!
It's almost enough to make a guy stick to repairing Japanese and Korean econoboxes and the occasional pickup truck! Only thing is, repairing that crap would put you to sleep or drive you to drink stronger than "sammiches" or both!
Duff had a love/hate relationship with this Ford refridgerator. He loved the comfy bench seat and the exciting ride but thot fixing it was boring. Yep, a totally Mortske classic! Bodes well for the rest of '22.
It keeps us on our toes!
New year, new projects, new adventures! All the best to you and Duff. May all the bills get paid easy and beers be tasty.
Good old mortske I need a brew with this video great job
Always good to watch a new Mortske video!
My bro had a 67 stepside, stock 351w when we were in HS. Waay to many ponies for a 17 yr old! Had alotta fun tearin er up though! Love your work!
Nice!
Well she sounds good all revved up! Got a love the loose Armstrong steering haha!
I really enjoyed the split-screen view of yourself and Duff on the ride; that was awesome! 👍
Hell yeah!! She’s a balmy 39 here in Sioux Falls!!
Next time you’re here I’ll buy you some sammiches!
Heck yeah!
You make Mondays great again!
I owned a 1960 pumpkin orange with black hood panels detail and pin stripes. same seat color reupholstered, rolled & pleated, black dash with (Go for it) in slime green decal. 312. Bad ass three in the tree. Damn thing was wicked. vibrated in gear, all hydraulic brake and clutch. I did not build it. The body work was done by a Guy named Larry Logston, from Maryville, Illinois. He put a lot of time in it. I got it in 1982, paid 900 hundred for it. Brakes blew lines and it sat, I had to part with it, someone like you picked it up on a farm field for a song. Along with a my 66 VW. with sun roof. Had much fun with both vehicles.
I just love your editing! Sarcasm is a greatly under appreciated art form!
Glad you think so!
that things a beast glad you made it back to the shop
Me too!
Great video. Duff on the left happy as pigs in poop and you suffering to turn the truck on the right.. Awesome Sauce.
Your steering, during the test drive, reminds me of the 12 O'clock High tv show where the pilot is trying to save the plane that is fixing to crash!😄
Favorite year model Ferd. Great little truck. 351W is a taller deck than a 289/302 so the intake is an inch or two wider, easy way to tell. A lot of kroil is always better.
Thanks you Mr Mortske & Duff for all your hard work and sharing your knowledge.
Our pleasure!
were going to need more of you and your dad working on stuff!!!!!!!!!!!!!!!!!!!!!
We'll see if we can get him to come back.
Dang that's the cleanest flexplate I've seen on something that's sat for a long time
Good old mortske Monday morning you fine sir are quickly becoming one of my favorite automotive youtubers.
Wow, thanks!
Thanks for scaring me when I was kind of sleepy. I woke right up!
Our pleasure!
Great vid.
I am not a Ford guy, but the 57 Truck is so unique...
Hope someone will save this one..
You might live in Podunk S. Canada, but believe me,..... you're not missing anything. Where you're at looks like Paradise to me. Good Vlog bud 👍
Best Ford Pick up ever built😅 greetings from O’l Guadalajara México 🇲🇽
From West Haven, CT. Happy New Year to " All " .
Same to you!
ANOTHER AWESOME VIDEO FROM SIR MORTSKE AND DUFF DOG!!! THANKS AGAIN GUYS!!! YOU GUYS NEVER DISAPPOINT!!! HOPE TO SEE MORE OF THE OL HOTROD TRUCK!!
Thanks much Travis!
@@MortskeRepair YOU'RE WELCOME BUD!!!
Duff is not having any slander against the old hot rod haha, bad ass rig though and the windsor is an awesome engine we had a lot of fun with them when we would put them in the old broncos.
Keep them coming, another good show. Thanks for making my Monday!
😆 sorry Greta - how dare you.
"What the French, Toast"? LOL! I Love it!
From Puddin to Mortski's this is going to be a Great Year.
Congrats on 80k. I was watching your live broadcast on Saturday new years and you helped. Another RUclips guy hit ,100 k. What a guy. Smack the like button every time like I try to do!!
Thanks much!
Inspector duff failed the inspection right at the beginning of the vid when he barked!! He usually reserves his over all findings until the end!! Good eye duffske!!! I'm surprised he didn't lift a leg!! Thanks for sharing captain!!
Duff is the best! Such a good boy. Enjoy all your videos. I,m particularly interested in 57 F100. My dad had one and I think they were the best . Such heavy sheet metal .
Thanks!
Ain’t nobody got time for that! Cracks me up every time! That and how dare you! Thanks man I always enjoy you videos
Our pleasure
Loving the Irish waterfall of smoke from that "tail" pipe that dumps just in front of the axle, she's gonna cheech bud!
Yeah Ford,...somebody got a nice project truck....Woooohoooo....that test drive was scary,...I imagine that straight axle was wobblin around cuz no bushings in those springs...Thanks for another fun episode.
I love your attitude about brakes, they are mostly optional. Love the content!
Glad you like them!
Very nice unit.. good looking truck
Nice find..
Good show,,
Good boy Duff! Thanks for the videos!
When you first went under the "Scamp", I thought Boomtube had a bit of work.... but then the driveshaft!!
Duffs impersonation of Scooby Doo was bang on.
Great start to '22.
Thanks.
I was about to give up hope but then right at the end, Greta made her appearance, my laugh for the day.
I love how your edits are getting better and better
Thanks much!
As usual, great video!
Those “SCAMPERS” though 😍❤️
White letters out, always!
Good video learned something new never seen it before on the valves on them thanks keep it up
Welcome to this week’s adventures of Nanook of the North! (🎶He comes from the land of the ice and snow🎶) You’re a Brave Man👍
Or just real dumb...