How to use APM 2.8 with TELEMETRY in Smartphone
HTML-код
- Опубликовано: 12 фев 2020
- #apm #telementary #smartphone #missionplanner
Hey guys!
In this video we have shown how you can use GPS & Telementry with APM2.X for quadcopter.
Soon we will upload how to use and create a flight data for it and use it for autopilot mode.
You can buy the products we have used here👇
APM 2.8 - amzn.to/2GNFOPO
FS-IA6B reciever- amzn.to/2EAAXiF
GPS - amzn.to/2VrqMTd
My drone specs :-
1) Standard F-450 Frame with integrated power distribution circuit- amzn.to/2NwO8E5
2) 4x 20A ESC's- amzn.to/2SrKEU9
3) 4x Brushless Motors- amzn.to/2Sw25mG
4) 12x Bullet Connectors- amzn.to/2EARToY
5) 5mm Heat Shrink- amzn.to/2GN1gVc
6) 2200 mAh 11.1V 35C LIPO Battery- amzn.to/2GOii54
7) FlySky FS-i6(Transmitter,Receiver)- amzn.to/2Nvregi
8) APM 2.9 Flight Controller- amzn.to/2Ssz0s5
9) 4x 1045 Props 2 CCW, 2 CW- amzn.to/2EzdfTJ
For any questions or concerns contact us at inovatrixhelp@gmail.com 
Наука
Ohhh very nice!!!!!you uploaded the video very soon!!!!!
Awsm work!!
Nice vid!
Hope it helps 😉
Great video, thanks
Tutorial for make waypoints please.
Thanks
Please make a video on fpv camera connection
Can you see video using this module?
does mini apm 3.1 works with this app?
Can we program arducopter with phone i don't have computer
From where u got this propellers for ready to sky motors please reply me bro..
these are avaiable on any hobby store.
Hlo Bhai if tele is not connected with copter what can we do pl tell me about it sometime.i can't understand why tele is not connected with APM and download parameters
bro when i open this app and connect the ground station to my smartphone, no popup is coming, nothing absolutely. its like the phone is not reading the ground station at all, but i can assure you that the ground station is working properly with my laptop. Cam you guess where the problem might be.....i guess there's a problem with my uart cable
Bro i have problem with telemetry my air and ground module are not paring bro.bro please replay after seeing this bro
What's ur firmware version
What is the app you are using
Can you do video streaming using the phone?
I have not tried it yet.
Do I need any kinda video receiver if have telemetry ..
Yes. Telemetry and video transmission works on different frequencies so you will need a video receiver.
do we still need rc transmitter?
Yes this only shows the telemetry data. Transmitter will be needed to control the drone.
Motor order on pdb is not necessary when signal comes from the APM?
No.
Just follow the numbering pattern
@@INOVATRIX Thank you for responding, I would follow the pattern but I am rotating the PDB 90° CW and I really just need you to say OK. How about running power to a servo? Can I just pull the BEC from the PDB and switch from the carrier board (hex cube) or should I connect the 5v to the middle rail? The documents are vague. Thank you for your time.
If your esc have BEC then you can run your servo directly from the receiver.
How to connect fpv mini camera in your dron
u need to buy a fpv cam , vtx and rtx
Can u pls send ur telmetry log data
Just I want to see how many amps does a Quadcopter like that dewa from the battery hope
U will link in ur google drive
Pls send me
I want to ask... can we just fly it without trim or auto tune
I just Fly it on auto level for most of the time but trimming is necessary for smooth operation.
I trimmed my yaw , pitch and rudder in my transmitter for best performance
@@INOVATRIX thank you
While doing live compass calibration by using this app , then the app get stucked
how much range uve reached with it so far?
Not yet tested.
Hlo sir At my case the telemetry is connected but no parameter are download and don't work so what can I do
Try to change the bud rate.
@@INOVATRIX how can
i want to ask... my drone fly up when the drone is in alt hold mode..what can i do
In alt hold mode you can go forward backward left and right without worrying about adjusting the throttle.
Move the throttle to increase or decrease the altitude.
@@INOVATRIX i mean once i turn to alt hold mode it fly up without i control
No
If you try turn it with QG, it wouldn't work. QG only support copter 4.0 and the latest version
What can I do
ruclips.net/video/cjTZHqCzWmQ/видео.html
Hi bro my GPS is not connected with APM
i am facing various of problems.
I am facing problem with telemetry, the range is not more than 50meters
Please help me
You can try to setting the telemetry's power on your mission planner
Bro telemetry sale kroge
can you please help me ??
Explain the problem.
drone is armed but motor is not spinning
Check the esc connection.
Battery connection.
no bro battery is connected and esc is also calibrated
Check the esc connection to the apm properly.