Hey bro! I really appreciate what you are doing. You are using your skill and knowledge in the right way. I have seen some RUclipsrs from india with lot of subscribers (I don't want to take thier channel name) who only make drone videos for the sake of fame and money. They even don't know the basics of building a drone. Keep the the good work up brother. You always have your support and blessings.
I recently had the same idea to save my photography drone from any accidents. It’s cheap, easy and enjoyable (for me at least!) This kid is very intelligent for his age!
I am glad to find your channel I gave from your video range less drone so I asked you if I I can't connect my drone to my satellite internet month plan
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever.. But I'm not using pmw sbus So you tell how to make connect wiring in d-bus..
Hi, i think i was your 1000th subscriber. Well first of all i want to say, you are so brilliant. Your videos of drone making are the best. I think you are the first to introduce obstacle avoidance in India. Well continue to give us your best. Thanks. One request that we want to see a drone with video transmission of several kilometers to a phone or tablet screen rather than fpv goggles. Can you do it? Because we feel just flying drones around is kids play. People want to explore beautiful nature around with their drone. So please make one. Thanks
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever.. But I'm not using pmw sbus So you tell how to make connect wiring in d-bus..
Bhai apm 2.8 ka input ka vcc and ground wire kaha connect karna he. I mean 2 say circuit ko power kaha see melega Plz answer I am in problem . Plz help
Hi Bro, I appreciate your work, but I am getting difficulty while arming my drone and when I look into mission planner I see that my RC is not connected to APM flight controller. can you help me with that?
The code works with pwm i guess , as he said in the video will work with any pwm based input on FC u will have to struggle a little if the reciever is ppm
sir i made a drone using kk2.1.5 , now i am planning to use other flight controller . with which flight controller should i start with apm2.8 or pixhawk can you please guide me bhai
You have learned a lot of things in proportion to your age. Honestly I am 21 years old now , বয়সের দিক দিয়ে আমি তোমার বড় হতে পারি কিন্তু জ্ঞানের দিক দিয়ে তুমি আমার চেয়ে বড়।
"Try to land" -- means manually or initiating land mode. if manually then provide more details about the flight modes and GPS status and more while it was flying and also tell how it crashed
Wow. You are very clever. I gave a dji phantom 3 standard Can you please send me all the Information I need to make one please. ? Or if you can make me one to fit on to the phantom 3 , I will pay you the money. Regards. Stuart England
Hey bro can u tell where can I learn to build the drone , i am thinking we are using a market flight controller instead of creating our own MPC or pid flight controller
@@DIYLIFEHACKER i want to achieve obstacle avoidance , but don't know how will i do that , i can write code for it but don't know anything about how will my code interact with flight controller
i soldered apm power module to the f450 board cutting the female xt60 port. what will happen ? and please tell me how to connect raspberry pi with apm 2.8 ?
Somebody, give this guy a scholarship!!!
A joung ver. of Elon Musk ? :)))
Hey bro!
I really appreciate what you are doing. You are using your skill and knowledge in the right way. I have seen some RUclipsrs from india with lot of subscribers (I don't want to take thier channel name) who only make drone videos for the sake of fame and money. They even don't know the basics of building a drone. Keep the the good work up brother. You always have your support and blessings.
I recently had the same idea to save my photography drone from any accidents. It’s cheap, easy and enjoyable (for me at least!) This kid is very intelligent for his age!
This dude deserves more likes👍
I was waiting for this video from last 1 month.. really nice video bro.. keep it up💐💐
I am pretty impressed with your ideas and creativity
Keep it up
Expected more from you 😉
The content is great, waiting for the openCV project. 👍👍
Sure
GREAT WORK .........BIG THINK BUILT SMARTLY & SIMPLY
Waiting for next part of this video. You really worked hard for this project,and keep it up.
👏👏👏👏 sabash.Really somebody give him a scolarship.
Only video in youtube on the topic. Kudos
Real hero of Drone...jo ki Minded hain ...baki drone RUclipsrs to copy kerte hain....bus....
Brilliant work kid!
Video editing is awesome.👍
😎 yes i still don't know his editing secret tool😂,
Really great job bro for all drone developers keep it up bro
Well done
From🇰🇼Kuwait
Waiting for open CV! Amazing job man! Proud of you
It's impossible to get parts through online stores to make project but sure I will make it
@@DIYLIFEHACKER Sure, And bro how did you power the Ultra sonic sensord and Arduino nano? Do you have whatsapp numer?
Well done , it helped me a lot thankyou so much
Really iam inspired from you
Bhai the drone is not calibrating bro what to do esc callibration
Search on google or youtube you will found a lot
this is actual smartness!
Excellent 👍🏻
Can you please help after all connection my reciver and Arduino is not getting on please help . My reciver is ppm
Your creative level is extraordinary 👍🏻 keep it brother !!
great job brother
Proud of you
Bro how your throttle is hold in center please tell me
DIY mechanism using Spring
I am glad to find your channel I gave from your video range less drone so I asked you if I I can't connect my drone to my satellite internet month plan
Wait a little.
Just my new video Unlimited Drone Range v2 comming soon
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever..
But I'm not using pmw sbus
So you tell how to make connect wiring in d-bus..
Let me check
@@DIYLIFEHACKER bro can u find any solution for this..?
Hi, i think i was your 1000th subscriber. Well first of all i want to say, you are so brilliant. Your videos of drone making are the best. I think you are the first to introduce obstacle avoidance in India. Well continue to give us your best. Thanks. One request that we want to see a drone with video transmission of several kilometers to a phone or tablet screen rather than fpv goggles. Can you do it? Because we feel just flying drones around is kids play. People want to explore beautiful nature around with their drone. So please make one. Thanks
Yes, I can.
My unlimited Drone Range Series...V2 coming soon if possible then I will add this feature. Otherwise in V3
@@DIYLIFEHACKER superb👍 Thanks
Very good vai..
Inspirational video
???
in the video tou have done with pwm receiver.. but i have pixhawk and a ppm receiver how to do this on a PPM receiver
Great work! ,waiting for open CV
Very nice
Bro u deserves a drone CEO of a company
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever..
But I'm not using pmw sbus
So you tell how to make connect wiring in d-bus..
Brro, Apm 2.8 not arming. Which year softwer use. Pleas softwear link.
please if I need to add smock detector to this drone what I need .please help thank you
Can you please help after putting all sensors and programming drone gets ARM only when it is connected to mission planner 🙏🙏
Nice
Video
Amazing video bro! Now get on the phone with Hubsan and tell them to hire you so you can give DJI a run for their money! You got this! 👊🏻
😮
Hello Can I use same code if I use Pixhawk FC instead of APM controller?
Hey bro ..... I very like it ... I want to put obstacle avoidance to my GoPro karma drone ... Can you help me?
which flight controller is being used by you
I used Apm 2.8 but u can use what u have
Bhai apm 2.8 ka input ka vcc and
ground wire kaha connect karna he. I mean 2 say circuit ko power kaha see melega
Plz answer I am in problem . Plz help
Power it from Esc BEC
@@DIYLIFEHACKER esc ke 3 pin wire Bec he kya Jo flight controller me lagta he . Plz reply
Bro can you do this same setup for s bus /speedybee flight controller
Bro the code is not working bro..
Error says " return code is not zero"
So, what I to do? Plz reply bro..
bro ! sirf landing k liye , niche ki taraf ek he sensor use karna hoga toh code mai kya changes honge ? mera drone thik se land nhi kar pata
the code includes feature of obstacle avoiding under the drone.
But according to your need it can't provide Alt hold any kind of feedback or Else
Hi Bro, I appreciate your work, but I am getting difficulty while arming my drone and when I look into mission planner I see that my RC is not connected to APM flight controller. can you help me with that?
Well Done
I was waiting for you, Full built video need.
Diagram and codes are in the description .I think Soldering and Pasting will be so boring
@@DIYLIFEHACKER bro I am a beginner, I do not understand digram so well. Thank you for reply
Your Code seems to have been picked up from instructables ,did you yourself make the code ?
These are my own codes.
someone uploaded I didn't www.instructables.com/Obstacle-Avoidance-System-for-Pixhawk-APM-KK-DJI-N/
How can I do that with s-bus receiver
where to connect rgb neopixel second terminal?
Connect only input terminal
does it works with raspberry pi too?
Where did you place down sensors
good job
it's work with controller MAMBA f405 MK2 ??
The code works with pwm i guess , as he said in the video will work with any pwm based input on FC u will have to struggle a little if the reciever is ppm
Sofrwear saport which laptop, window 7orwindow10
fantastic
love u bro really u must be awarded with something also more subsss
Hii. I use radiolink at 10 ii transmitter and receiver so is the wiring diagram same?
ok but what about the rtl mode is it work
what if I don't use the receiver, but I use a bluetooth module
how.
configuration?
You are genius but I not understand English I want to this type video Hindi please ❤️👍🙏
Ha🔥👍
Okay sure
Bhaii...me same tera pura codes or maping kiya ...phir bhi kuch problem ho raha he ...kuch help karde bro !
what if the receiver I use only uses 4ch? So where should I put ch5 and ch6?
I really beg you to answer my question this time. please ....
please.....
no need, just a bit code difference.
put condition to enabke obstacle avoidance system only when downward sensor defecting height above 1 meter.
hi i wan to ask , from flight controller to arduino, connect via input or output of flight controller ?
is this compatible with dji naza FC ?
unltrasonic sensor is used for small distance but for a long distance we have to use ladar then how we code for lader sirr...
depends on the module
Hey just want to ask is the code in the description is the edited one ?
Please provide us the sbus code and wiring diagram too.
does this techniq works with pixhauk? beacase it has onpy one input chanal.
You are genius but I not understand English I want to this type video Hindi please ❤️🔥🔥👍🎉🎉🎉🎉
Ok 😊
U can also use MaxBotix Obstacle Avoidance. Give it a Try.
MaxBotix
What's that??
@@DIYLIFEHACKER Powerful Ultrasonic Sensor.
Expensive
@@sala7311 worth the extra penny.
Good job! I want to learn more too.
Youre the best.me from Bali
Can we add this obstacles avoiding system for DJI naza m lite flight controller pl tell bro
Hey can you make your next video on how to make gimbal for drone
Not next but surely in future
sir i made a drone using kk2.1.5 , now i am planning to use other flight controller . with which flight controller should i start with apm2.8 or pixhawk can you please guide me bhai
Nice
Awesome.. love you.... Brow.
bro i need to do in pixhawk i need s bus code can you plz help
This guy is amazing
wonderful man, greeting from Hong Kong
Thanks.
Me from India
please keep your amazing work.
@@steveau1747 Sure, new video coming a little bit late due too technical glitches
Great idea bro never thought abt it
Hero
Make a gimbal for action camera
Sure,
I was also thinking about that.
thanks!!
Every thing of the gimble will be "HOMEMADE"
Even the motors
Mind blowing bro!!
Keep making informative videos..
BTW what are you studying at present and what's the plan for future!!
Now, I'm in Class 10.
Am from WestBengal
@@DIYLIFEHACKER Bro!! I am also studying in 10th. All the best for your exams 👍👍
You are awesome bro. I am one of your biggest fan from Bangladesh 🇧🇩 feeling proud for you as a Bengali
You have learned a lot of things in proportion to your age. Honestly I am 21 years old now , বয়সের দিক দিয়ে আমি তোমার বড় হতে পারি কিন্তু জ্ঞানের দিক দিয়ে তুমি আমার চেয়ে বড়।
Amazing bro
Bhi ya drone banana ko paisa keha sa laya??
I have a problem when i try to land my drone it has not been able to disarm it is automatically fly and crash I use apm2.8 and GPS external compass
"Try to land" -- means manually or initiating land mode.
if manually then provide more details about the flight modes and GPS status and more while it was flying and also tell how it crashed
@@DIYLIFEHACKER I fly my drone in loiter mode and land by remote stick not use rtl
Wow.
You are very clever.
I gave a dji phantom 3 standard
Can you please send me all the Information I need to make one please. ?
Or if you can make me one to fit on to the phantom 3 , I will pay you the money.
Regards.
Stuart
England
Super
Make a video on Dji naza v2
Obstracle aviodances.. used 6ultra.sansure with Arduino nano..
Hi，we are doing similar things and I used same system for a test. But why my drone responses too late to fly normally？ hope for your instruction！
1. Use millis() function instead of delay.
2. Use interrupt to read PWM signals
Bro help me jab Mai drone ko fly karke bapas land karta hoon by sticks not rtl tab drone crash ho jata hai
Hey bro can u tell where can I learn to build the drone , i am thinking we are using a market flight controller instead of creating our own MPC or pid flight controller
Finally what do you want?
@@DIYLIFEHACKER i want to achieve obstacle avoidance , but don't know how will i do that , i can write code for it but don't know anything about how will my code interact with flight controller
Just pwm outputs to mimic a rc receiver
lease provide us the sbus code and wiring diagram too.
where to connect channel number 6
i soldered apm power module to the f450 board cutting the female xt60 port. what will happen ?
and please tell me how to connect raspberry pi with apm 2.8 ?
Check out "Navio 2"