APM 3.1 Video Series - Simple 3DR/MAVlink radio setup and use

Поделиться
HTML-код
  • Опубликовано: 15 янв 2015
  • In this video I cover the main points of the 3DR/MAVLink telemetry radio system and install and configure it on an APM Mini 3.1.
    In this video we cover:
    - How to connect the airside radio (3:47)
    - How to check that the connection between radios is working (8:17)
    - How to check that the radios can speak to the APM (9:04)
    - Show a live connection in Mission planner (10:01)
    - How to update the firmware on each radio device (14:14)
    Visit the official pages by clicking on ardupilot.org/c....
    Please see my channel for many more videos on the excellent APM platform.
    Thanks for watching, please like and subscribe!
    Happy flying!

Комментарии • 228

  • @metalsnake27
    @metalsnake27 9 лет назад +1

    At first I was having problems connecting to it via Mission Planner, as the com port wouldn't come up.
    Then realized Windows didn't install the drivers correctly for whatever reason. Re-downloaded the drivers and it works now.
    Thanks for the video, was helpful!

  • @johncgibson4720
    @johncgibson4720 7 лет назад +1

    Love it. I just received my APM mini 3.1 in the mail. And this clarifies the bottom connector. Also, I just paid for the pair of 3DR telemetry 915MHz on ebay. Hoping to set it up like you have.

  • @LeviMaston
    @LeviMaston 9 лет назад

    Thank you so much! I couldn't have got my APM set up without your videos.

  • @davehafner8734
    @davehafner8734 8 лет назад +1

    Fantastic presentation the only truly complete description I have found thank you so much for all your research and crystal clear instructions

    • @Painless360
      @Painless360  8 лет назад

      +Dave Hafner Thank you for the feedback, glad you found it useful!

  • @taneliharkonen2463
    @taneliharkonen2463 9 лет назад

    Oh yes! Nice :) Just ordered ftdi con. and mavlink just because you make it so easy and simple! :D Thank you for scratching your head for 3-4 days and make it 20mins for me! Happy flying! :)

  • @FabricioMedeiros
    @FabricioMedeiros 9 лет назад +1

    Great explanation my friend ! I go follow step by step to make my setup here. Cheers from Brazil !

  • @HeliGav78
    @HeliGav78 4 года назад +1

    This is driving me crazy, updated firmware, windows 10 coms correct, 7tx, 7rx,gnd,5v connected on fc to holybro. Solid green leds....but keeps throwing up heartbeats error? Anyone have any ideas?

  • @golftraxx6047
    @golftraxx6047 4 года назад

    This is a great video. After I restored the defaults and got the 3DR radio connected to APM on my Mac and the X8+, I got the 417 params downloaded and Load Settings STATUS: SUCCESS and on Ground Control side on telemetry I see solid Green. YAY! But when I Copy Required Items to Remote, nothing happens and on the remote craft side it is still flashing red.

    • @golftraxx6047
      @golftraxx6047 4 года назад

      I am on a Mac. SO I have now been able to get green on both ground station side green and and the craft, but in doing so, it seems to have deleted the port settings to connect directly from the computer to the craft, so since I got telemetry working, the settings used previously to connect from the PC to the craft are gone. No idea how to recover them. It says its connected but now never provides any Flight data in APM that previously, so what I think is I need to recover the port settings for direct connect to the craft.

  • @luisangelvaltierra2442
    @luisangelvaltierra2442 8 лет назад

    you can unplug the cables from the conector and change the type, its easier than cutting the cable and fixing hte connection.

  • @PTTM2006
    @PTTM2006 9 лет назад

    This is gold !
    Thanks a million

  • @jaimefuentes-acundo6935
    @jaimefuentes-acundo6935 2 года назад

    Is there a way I could use a 9Xtend Radio for the PixHawk? I would love to hear your thoughts and opinion.

    • @Painless360
      @Painless360  2 года назад

      I've not used that here. There are two main options - use dedicated telemetry radios like this or use some other RC control system that embeds MAVlink into the downloaded telemetry...

  • @syedmuhdakram8450
    @syedmuhdakram8450 4 года назад

    Example i have OmnibusF4Pro fc and i use tbs cross fore nano but i want to use crossfire telemetry in qx7 and 3DR in mission Planner it can possible?

    • @Painless360
      @Painless360  4 года назад

      I'm not sure there are enough ports on that TV for that. Best of luck with it

  • @paveldobos3771
    @paveldobos3771 5 лет назад

    I also haved problem with driver on win10 and get back to privios version on 6.7 . After what i have connection on ground part. and I think i will need to update firmware with ftdi on both sides to get the right link. thanks for video.

  • @SERGIOALONSOCOLLADOMEDINA
    @SERGIOALONSOCOLLADOMEDINA 9 лет назад

    Thanks for those videos. Please one more showing how to setup a minimosd with mini APM 3.1 and one question, is it possible to use the minimosd and also a Bluetooth module at the same time? I think that they use the same telemetry port.
    Thanks again

  • @hiskydrones9037
    @hiskydrones9037 8 лет назад

    hey great vid helped lots-one thing though-can u post a link on where I can get the battery voltage to display ? I have a full charged battery and mission planner says its 0.00%

  • @tareqtechnical546
    @tareqtechnical546 2 года назад

    I have two pieces of FPV Telemetry Module. Both of them are Ground module. Can I use one of these modules as air module? I want to connect ground module to the pixhawk cube. Because my air module is not working. Thanks

    • @Painless360
      @Painless360  2 года назад +1

      It depends on how they are made. The modern ones seem to like to be either.. Best of luck!

    • @tareqtechnical546
      @tareqtechnical546 2 года назад

      @@Painless360 I made many attempts but with no result 😢

    • @Painless360
      @Painless360  2 года назад +1

      I'd suspect that you are using the very inexpensive older style that were dedicated. Best of luck.

  • @1brbrs1
    @1brbrs1 7 лет назад +1

    I wonder if we can control the drone motion (i.e. throttle and servos) using the telemetry kit and some software on a laptop; with a joystick connected to it.. so we eleminate the need for the trasmitter and receiver and extend the range of flight.. crazy right?!!

    • @Painless360
      @Painless360  7 лет назад

      ardupilot.org/copter/docs/flying-with-a-joystickgamepad-instead-of-rc-controller.html ;)

    • @1brbrs1
      @1brbrs1 7 лет назад

      My godness!! what a surprise!! thank you alot :D

  • @Surferant666
    @Surferant666 2 года назад

    Hello can you help me with the ground base connection of these radio connections. I plug mine in and it doesnt instal the drivers. It lights green but no connection led.
    Thanks

    • @Painless360
      @Painless360  2 года назад +1

      If you are using the same ones as I did, then these are very old technology now. See more up to date videos for modern options. It'll probably be a driver issue so I would contact the seller for a manual and help. Best of luck

    • @Surferant666
      @Surferant666 2 года назад

      @@Painless360 which is the best ground controller to use? Q ground control doesnt seem to have the mavlink view to check the devices firmware and parameters,
      mission planner does but i hear mission planner is now obsolete

  • @skillt1674
    @skillt1674 8 лет назад

    Great stuff, worked immediately

  • @robrow
    @robrow 9 лет назад

    Great series of videos as always, I am looking to use APM 3.1 in a smaller quad. Currently I am using a 3DR PX4 with both 3DR radio link and minim OSD (one output for each on PX4) so I get live OSD on my Tx mounted Hudl. Would it be possible to do a further video showing the connections required for this setup? Many thanks and keep up the good work.

  • @hookabunny5030
    @hookabunny5030 5 лет назад

    I have mission planner and tower beta what icon do I click in tower beta to get the settings from mission planner to be programmed into my APM so it will have same settings as mission planner... You have been a big help to all of us new pilots Thank You

    • @Painless360
      @Painless360  5 лет назад +1

      I don't use Tower here. Last time I looked, it was more of a monitoring/basic system compared to a full mission planner/GCS. Best of luck with it!

  • @mysecondaccount7887
    @mysecondaccount7887 4 года назад

    Hey, is there any existing support in mission planner and ardupilot for frsky telemetry ardupilot communication?
    It seems from my own searching that no-one uses frsky telemetry with ardupilot mission planner, quite confusing 😢. frsky r9m has better range for one thing!

    • @Painless360
      @Painless360  4 года назад

      Smartport telemetry is coming and I've setup the passthru telemetry back to my FrSky radios in all of the recent Ardupilot builds - check them out..

    • @mysecondaccount7887
      @mysecondaccount7887 4 года назад

      @@Painless360 Oh nice, it'll be good to remove the need for the pass-through converter in favour of native smartport. At least mission planner-like functionality for telemetry is supported directly on frsky radios, but what about support for frsky radio to mission planner over a serial connection?
      Thanks for replying so quickly 😍 Love your work, I'm just about to get my first aircraft and your videos are my primary resource

    • @Painless360
      @Painless360  4 года назад

      All covered in the upcoming Telemetry video.. Stay tuned!

  • @ysy69
    @ysy69 6 лет назад

    Hi, so there's no need to bound the receiver and transmitter in this case? Or you did it but not shown in this video. Thanks

    • @Painless360
      @Painless360  6 лет назад

      The Mavlink radios should come 'paired'..

  • @desmondthang6759
    @desmondthang6759 7 лет назад

    Hi... I just received my 3DR telemetry V2 from ebay. I have APM2.8 so I have to change the connector going into the APM2.8 side. Matched the RX to TX and TX to RX in the APM connector. When I fired up my drone and also pluged in my second radio into laptop, All I got was only solid green light. No second blinking light.
    Under Mission planner, I kept getting " Failed to enter command mode" when loading settings. I have changed the baud rate to 57600 and still error. Flipped the rx/tx in the APM connector and no help. Any other idea?

    • @Painless360
      @Painless360  7 лет назад

      Not sure, I've not seen that but a quick search of the forums show others who have. Best of luck with it, I hope you figure it out soon..

  • @walk4348
    @walk4348 7 лет назад

    I've got a question. I can't get my radios to work after I soldered in the osd. They were working fine when I benched tested them on an APM 2.8. But when I installed them into the APM 3.1 and soldered in the OSD all I get is "no heartbeat packets received". I've redone the solder connections twice. I'm positive my solder connections are good and I know the radios work because I bench tested them on an APM 2.8. But I can't get them to talk plugged into the APM 3.1.
    Also, I get the solid green light when both are plugged in. When I click "load settings" all the radio information on both sides comes up. So that tells me they are communicating. I have the baud rate set at 57600.
    You have any idea what my problem could be?

    • @Painless360
      @Painless360  7 лет назад

      +Walk 434 an APM will only run one device connected to the telemetry port at once.. best of luck.

    • @walk4348
      @walk4348 7 лет назад

      I got the remote on the quad blinking. Which tells me that's it's now receiving packets. I had to install the Arduplane firmware instead of the Arducopter. I think the problem may be it's not able to transfer the parameters over the link to the remote. I may need to get an FTDI and hook the remote up to the usb to install the firmware to it.

    • @walk4348
      @walk4348 7 лет назад

      I just had a brainfart. I did not hook an ftdi up to the minimosd to set the correct firmware for the flight controller. I still think I need to do the same with the telemetry radio as well. I think maybe when I perform both of those steps everything will work just fine.........least I hope. I'll keep you updated.

  • @hangfire5005
    @hangfire5005 9 лет назад +1

    I imagine any usb>serial adapter will work if you can connect it to the radio

    • @Painless360
      @Painless360  9 лет назад

      Jarrod P Should do. The FTDI is used a LOT in the hobby for building and config though..

  • @diverwa
    @diverwa 8 лет назад

    So the warning at the end is for? I did what you said not to. did I smoke the remote radio? Green solid light shows linked ye the is no heart beat when trying to connect. Thanks for all the great videos.

    • @Painless360
      @Painless360  8 лет назад

      Powering ANY transmission circuitry/power system without the antenna attached will have a high probability that the transmitter will be damaged. I'd try and update firmware and confirm the 'magic number' is the same on both radios and if it still doesn't work then you've smoked one.. Best of luck!

  • @stephensweeney5167
    @stephensweeney5167 7 лет назад

    Hi... I seem to have found something odd with the Pixhawk, MP, and the 3DR Radio.... I followed your instruction, and plugged the newly updated 3DR into the Pixhawk Telem 1 port... No heartbeat. So I started testing things and here is what I found:On the pixhawk, there are 2 telem ports, and if you go into MP under Full Parameter List you see the 2 telem ports list as:Telem1 SERIAL1Telem2 SERIAL2Could these be backwards?I tested this by setting both ports to 9 (9600) since nothing works with that much anymore.My 3dr radio did not work in either telem1 or telem2 as expected.If I set SERIAL1_BAUD to 57 and SERIAL2_BAUD to 9My 3dr works in TELEM2 port but not telem1 port.If I set SERIAL1_BAUD to 9 and SERIAL2_BAUD to 57My 3dr works in Telem1port but not in Telem2 port.You must Reboot the board before the new values take effect.Let me know what you think.... Is this something I should report, or is it a known issue already. I am fine since I got everything working.... But there is a lot of people having problems with this if you check the forums, and no one seems to have noticed this. Maybe it is my Pixhawk from China, but everything else is working fine. Thanks Steve

    • @stephensweeney5167
      @stephensweeney5167 7 лет назад

      Nevermind... I found my problem... I cannot read the top of the pixhawk... Sorry Steve

    • @Painless360
      @Painless360  7 лет назад

      Glad you got it sorted!

  • @ErichNeugebauer
    @ErichNeugebauer 9 лет назад

    Great vid, thank you! What voltage do you use when programming the airside telemetry board? I have a FTDI board where you can choose 5V or 3.3V. Thanks

    • @Painless360
      @Painless360  9 лет назад

      Erich Neugebauer The airside radio is normally a 5v device (as shown in 16:19)Best of luck.

  • @Bananaskin1
    @Bananaskin1 9 лет назад

    Hi there, thinking of the APM 3.1 over the larger 2.X series, looking on eBay for the 3DR Radios however nearly all say they are compatible with the 2.x and no mention of use with the 3.1. Did you use a 2.x 3DR Radio? Cheers.

  • @threedee999
    @threedee999 7 лет назад

    Need some help.
    Not sure what i'm missing, but i cant get it to connect to planner at all.
    The green led goes solid on both ends, but i cant seem to get flashing red (heartbeat ?) ?
    I can connect to both ends on planner (sik radio) while usb is in usb and air is connected via ftdi adapter. Can read the settings on both. Flashed local, but it still wont connect.
    Checked and rechecked tx/rx wiring, baud settings, etc...
    Help ?

    • @Painless360
      @Painless360  7 лет назад

      Have you tried another USB cable?

    • @threedee999
      @threedee999 7 лет назад

      Cable is good. It was a case of "fear of specialist" :D
      First time aster reflash didnt work. Kicked it off my table, all angry, retried a bit later and it connected. No idea why. Ghost in the machine, etc...

  • @KellyMercerhfx
    @KellyMercerhfx 9 лет назад

    Well done, thanks!

  • @ytchannel2057
    @ytchannel2057 4 года назад

    Which one should I buy 433mhz 100mw or 433mhz 250mw or 433mhz 500mw.In which one will I get the best range

    • @Painless360
      @Painless360  4 года назад

      More power will give more range (all things being equal) but not all power levels are legal everywhere.. Look what resellers in your country are selling. Best of luck!

    • @ytchannel2057
      @ytchannel2057 4 года назад

      @@Painless360 thank u sir

  • @theDARKempror
    @theDARKempror 5 лет назад

    Hello! So if I set a mission path for my drone and pause it midway, will it be possible to control it manually with my Radio controller?

    • @Painless360
      @Painless360  5 лет назад

      Yes - by taking it out of the AUTO mode. - see the detail in the excellent Ardupilot documentation.

    • @theDARKempror
      @theDARKempror 5 лет назад

      @@Painless360 Thank you so much for the response, if possible do direct me towards the specific document, great help thanks!

  • @davidringler7131
    @davidringler7131 9 лет назад

    Hi, I am working on installing a pixhawkp4 on a tarot650 quad using 4114 320kv motors and I am doing cancer treatment chemo and my mind is fuzzy&forgetful,I realy ould use your help wiring the pixhawk? if possible let me know?GGOD BLESS

    • @Painless360
      @Painless360  9 лет назад

      +david ringler Follow the diagrams in the videos and the manual is excellent. Keep those props off until you are sure you have them connected the right way and turning the right way too..I have a Pixhawk series that may be useful as we build it and wire it in those videos too.Best of luck.

    • @davidringler7131
      @davidringler7131 9 лет назад

      I WATCHED ALL OF THOSE VIDEOS AND I AM STILL LOST!! IT IS THE CHEMO BRAIN THING! WOULD IT BE POSSIBLE TO MAKE A TIME TO HOOK UP ON WEBCAM? AND JUST WALK ME THROUGH A FEW STEPS?IT SHOULD ONLY TAKE TEN MINUTES MAX? MAVLINK IS ALREADY SETUP MOTORS AND ESC,S ARE ALL INSTALLED JUST NEED TO HOOKUP PIXHAWK I AM USING TARANIS PLUS L9R RX SBUS I REALY NEED SOMEONE BECAUSE THIS CHEMO HAS ME SECOND GUESSING EVERYTHING!

    • @Painless360
      @Painless360  9 лет назад +1

      No need to shout! I can appreciate that you are frustrated but slow down and take your time to check each step.
      I do provide one-to-one coaching and support via Skype but this isn't free. If you are interested in looking at this then PM me via RUclips and we can setup a time for a call.

  • @stevehobson1288
    @stevehobson1288 9 лет назад

    hi i have got my hex flying sort of ok but the yaw seams to rotate to the left

    • @Painless360
      @Painless360  9 лет назад

      Steve Hobson hi Steve, if you are using the compass to maintain the heading check for interference from the power lines. If not then use trim to remove the drift - the APM may see them middle throttle position as slightly to one side..
      Best of luck..

  • @syedmuhdakram8450
    @syedmuhdakram8450 4 года назад

    Hye im new in this hobby , i confuses how to get realtime telemetry during flight such as direction of plane and amps battery voltage and etc . I want to monitor it using pc in field .

    • @Painless360
      @Painless360  4 года назад

      I have videos on the telemetry radios you can use. Updated video coming soon as well

    • @syedmuhdakram8450
      @syedmuhdakram8450 4 года назад

      Painless360 thnks you so much

  • @tonesdrones7395
    @tonesdrones7395 2 года назад

    Where can I order one great video fairly cheap 🤔

  • @rameelkhan3966
    @rameelkhan3966 7 лет назад

    do i need a mavlink for autonomous flight or can i directly give the waypoints to the mission planner on ground through the usb cable,, sorry am new to this

    • @Painless360
      @Painless360  7 лет назад

      You can upload them before take-off and they are run from memory.. Happy flying!

    • @rameelkhan3966
      @rameelkhan3966 7 лет назад

      Thanku for helping me out here ..Much appreciated ;)

    • @rameelkhan3966
      @rameelkhan3966 7 лет назад

      painless plz tell me there are loads of APM in the market..i want an apm 2.8 which probably does not have a compass on board but the market guy says that it has one plus it does not say anything on the cover of it like no version...how can i visually tell the difference and know that i am getting the right one ...am getting a neo 6m with it

  • @billpatterson267
    @billpatterson267 9 лет назад

    Can this be used on a tablet with a micro USB port if I was to use an USB to micro USB adapter ?

    • @Painless360
      @Painless360  9 лет назад

      It can using an OTG (on the go) adapter. Make sure you tablet supports it though as a lot don't.
      Happy flying!

  • @todotvstreaming
    @todotvstreaming 5 лет назад

    Hi. I am having issues with the heartbeat on my pixhawk. I cannot connect to the pixhawk via mavlink telemetry. Updated drivers but not working. Any ideas or suggestions?

    • @Painless360
      @Painless360  5 лет назад

      Sounds like the radios are not connected - see my other videos on the telemetry radios. Best of luck

    • @todotvstreaming
      @todotvstreaming 5 лет назад

      @@Painless360 thanks I'll check them out.

    • @todotvstreaming
      @todotvstreaming 5 лет назад

      Thanks for the videos. I will try and check out the wire connections and see if I have to reverse the tx and rx wires. If not I guess it might be a firmware update. If both the air and ground radio have usb plugs, can I update them via USB or do I need the ftdi bridge?

    • @todotvstreaming
      @todotvstreaming 5 лет назад

      Ok so using the Sik radio configuration app i was able to communicate both radios. The red LED was flashing in both units. The issue is with mission planner that will not send the command via the telemetry radio. Any ideas what to look for on the parameter list? thanks for all the help provided.

  • @ishanupadhyay361
    @ishanupadhyay361 6 лет назад

    Hi bro,
    First of all its really a very helpful video. It really helped me. But i wanted to know that can we control quad or fly quad by laptop (keyboard) and arm and disarm it?

    • @Painless360
      @Painless360  6 лет назад

      Yep. That’s all covered in the Ardupilot docs. Best of luck k!

  • @Ram777x
    @Ram777x 9 лет назад

    Thank you for the great video.
    I’m currently more a MultiWii guy and followed all your videos including Bluetooth connecting and I wonder why the MAVlink modules requires FW and protocol (between each side and its radio not the PC and the FC board which is obvious (AT?)) and cannot just emulate UART like the Bluetooth module dose.
    I have an idea for you for a video; connecting ESP8266 Serial WIFI Wireless Transceiver Module to MultiWii. The WIFI supports much longer distance than the Bluetooth.

    • @Painless360
      @Painless360  9 лет назад

      Hi, the radios act as a virtual USB cable and are using firmware/software to encode the 57K USB data stream and perform error correction at each end.
      In theory this should work with our friend the Multiwii too..
      Thanks for the suggestion for the video - Happy flying!

    • @Ram777x
      @Ram777x 9 лет назад

      Painless360 Thanks.
      Maybe I’ve got the wrong impression from here: copter.ardupilot.com/wiki/common-using-the-3dr-radio-for-telemetry-with-apm-and-px4/ that the radio should be accessed with some AT commands on a regular basis.
      Looking a bit deeper, maybe it can be programed once and do act as a regular wireless UART that can fit MultiWii.

    • @Ram777x
      @Ram777x 9 лет назад

      Ram777x in a second search, it was done : www.multiwii.com/forum/viewtopic.php?f=6&t=2459

  • @harryphillips716
    @harryphillips716 7 лет назад

    Hi there, I am running apm 2.8 with 915mhz telemetry, can I use my 5.8ghz fpv googles to receive signal from the telemetry?

    • @Painless360
      @Painless360  7 лет назад

      +harry phillips no you can't, you'll need a telemetry radio to plug into your tablet or PC.

    • @harryphillips716
      @harryphillips716 7 лет назад

      So how would I get the video feed to appear on my fpv googles!

  • @yokonunz
    @yokonunz 7 лет назад

    Can I use two "airside" radios but connect one to the PC with an FTDI adapter? Will the link work? thanks

    • @Painless360
      @Painless360  7 лет назад

      I've not tried but if one is master and the other slave with the same ID it might. The radios are so cheap now not sure why you'd make it harder than it needs to. Best of luck!

    • @yokonunz
      @yokonunz 7 лет назад

      thanks. I'm asking cause on the ground side I want to use a serial Bluetooth dongle that will connect to my phone. that won't work with the USB port

    • @Painless360
      @Painless360  7 лет назад

      If you get it to work, let me know.. Best of luck!

    • @yokonunz
      @yokonunz 7 лет назад

      ok. thanks!

  • @aerialphotographyRDT
    @aerialphotographyRDT 8 лет назад

    can I change the settings on both telemetry modules without using the FTDI module? thx

    • @Painless360
      @Painless360  8 лет назад

      If the radios are talking to each other then you can change things over the connected wireless link. The latest version of these radios (V2) have USB connectors on them to avoid the hassle. Best of luck!

  • @axljackass
    @axljackass 7 лет назад

    hi! does the ground station like PC needs to be connected to internet while flying in order to update the map or i can use it in the field even though without internet connection?thanks

    • @Painless360
      @Painless360  7 лет назад +1

      Nope, Google 'Mission Planner Prefetch' ;D

    • @axljackass
      @axljackass 7 лет назад

      thanks.

    • @axljackass
      @axljackass 7 лет назад

      by the way, 3dr radio is 100mw only right?im thinking of making a DIY amplifier to make it 1000mw for both tx and rx side so it can match up with my DIY 1000mw 433mhz openlrsng transmitter.

    • @Painless360
      @Painless360  7 лет назад

      Be careful - I'd look at the power you are legally able to use in the country you're in on the frequency and usage you want.. Best of luck!

  • @shecars6921
    @shecars6921 2 года назад

    can i use this system to get telemetry of my RC car??

    • @Painless360
      @Painless360  2 года назад

      If it has a flight controller using Audupilot... Yes.

  • @ansariflightplan5814
    @ansariflightplan5814 8 лет назад

    Hi Sir
    Can u tell us how to control quad using MAVlink, i means using transmiter > apm > mavlink > Flight controler, so no need to put receiver on quad

    • @Painless360
      @Painless360  8 лет назад

      +Ansari Flight Plan copter.ardupilot.com/wiki/flying-with-a-joystickgamepad-instead-of-rc-controller/ ;)

    • @ansariflightplan5814
      @ansariflightplan5814 8 лет назад

      Omg.. if i know i won't buy transmiter =D

  • @balajikannan6457
    @balajikannan6457 8 лет назад

    where did u get those hardwares...

  • @wmzaphod
    @wmzaphod 8 лет назад

    Hi there, hope you are well. I have put together a 450 quad with APM 2.6, 900 Mhz telemetry and Minim OSD using your tutorials and all works beautifully. I have one minor issue tho which is - when the telemetry is not connected (to the PC), the GPS doesn't seem to initialise and no matter how long I wait, it never shows on the OSD. I have spent quite some time researching this without any luck. Would you have any thoughts on the matter? Regards, Peter.

    • @Painless360
      @Painless360  8 лет назад

      +Peter Hegarty Are you not getting power to the GPS? If not then the power to it may need to checked. J1 would be a place to start and see if you can see the positive voltage on the GSP connection with and without the USB plugged in.. Best of luck..

    • @wmzaphod
      @wmzaphod 8 лет назад

      +Painless360 yep, power is fine to all parts, the gps will only work when APM planner is connected, I'm guessing I've missed a setting somewhere ???

    • @wmzaphod
      @wmzaphod 8 лет назад

      +Painless360 sorry I missed the bottom of your message (I'm using my phone) . I'm using the telemetry (wireless) not usb, but until APM planner is connected via wireless, the GPS won't show up, as soon as I do connect, away she goes. It's odd because I thought I could get full functionality without having to take a laptop with me to the field.

    • @Painless360
      @Painless360  8 лет назад

      That is odd, never seen that before. I would have a good mooch in the forums. Sorry I don't have a 'magic bullet' answer. Best of luck.

    • @wmzaphod
      @wmzaphod 8 лет назад

      +Painless360 yep, very odd, will let you know if I find a fix, thanks for your time 😊

  • @tptwk
    @tptwk 9 лет назад

    Which 3DR radios did you buy and how much were they? Link?

    • @Painless360
      @Painless360  9 лет назад

      These are 3dr clones that I ordered from eBay. Search for 3dr radios and you should find similar ones. Happy flying!

  • @jogomez1988a
    @jogomez1988a 8 лет назад

    Hi, sr. Have you test another radio moduls as a Digi Xtend 900Mhz modems ?

  • @year10zahalla6
    @year10zahalla6 9 лет назад

    Exceptionally good video as are all your videos. Can you connect the ground side with an OTG cable to an android device?

    • @Painless360
      @Painless360  9 лет назад

      Thanks for the positive feedback! I've tried a few OTG cables on my Samsung tablet and sadly the Samsung I have doesn't provide power (+5V) out of the OTG cable so the radio can't power up. I believe that some other tablets do provide power so thet should work..
      Let me know how you get on..

    • @year10zahalla6
      @year10zahalla6 9 лет назад

      Painless360
      Actually I am in the research stage so I haven't finalized what I am going to buy. I have just noticed hobby king have come up with a complete micro apm solution have you any thoughts? www.hobbyking.com/hobbyking/store/__74654__Micro_HKPilot_Mega_Master_Set_With_OSD_GPS_Telemetry_Radio_PDB_BEC_Power_Sensor_433Mhz_APM_.html

    • @Painless360
      @Painless360  9 лет назад

      Looks interesting and is different again from the APM Mini 3.1 in these videos. If they keep coming out with different form factors support and cables will become very complicated!
      Happy flying..

  • @jackbrimstone1004
    @jackbrimstone1004 4 года назад

    What is the difference between the APM 3.1 VS APM 2.8??

    • @Painless360
      @Painless360  4 года назад +1

      The APM 3.1 is the 'mini' APM. I wouldn't use the APM now, it's VERY out of date. See my more recent builds..

    • @jackbrimstone1004
      @jackbrimstone1004 4 года назад

      @@Painless360 oh my so is apm not a good enough starter platform i am now building my hexacopter with an apm 2.8 flight controller planning to do aerial photography is there a better option as in bang for your buck out there that has an open and supporting market like the apm? Please let me know i feel so silly right now. 😵

    • @jackbrimstone1004
      @jackbrimstone1004 4 года назад

      @@Painless360 ok so i just went over and now i am planning to change to the pixhawk i saw 2 deals on amazon one with everything inclusive of gps and such and another without i am now wondering if the accessories i have for the apm 2.8 is compatible with the pixhawk

  • @shawnluces5745
    @shawnluces5745 3 года назад

    How to connect my cell phone to APM 2.8 flight controller via telemetry

    • @Painless360
      @Painless360  3 года назад

      I've never tried. Let me know if you get it working.. Best of luck

  • @kkhalifah1019
    @kkhalifah1019 8 лет назад

    Question: The whole of RUclips seem to agree that these rubber ducky antennas are rubbish.
    Can I swap them out with those clover leaf types for better range?

    • @Painless360
      @Painless360  8 лет назад

      That's normally talking about FPV systems. These radios use a much lower frequency with a lot more 'punch' and penetrating power than FPV transmissions so it's less of a problem. Happy flying!

    • @austntexan
      @austntexan 8 лет назад

      What about using a lightweight 433mHz Sander style antenna from a ezUHF rx? Hopefully this isn't too outside the scope of your APM 3.1 series, but what is the difference compared to the Mini APM Pro?
      Always great videos. Painless360 channel is my go-to for excellent RC advice. Thank you for all your work for us!

    • @Painless360
      @Painless360  8 лет назад

      Sorry, that's outside my experience. We've also not used the APM Mini Pro here either. Sorry I can't be of more help on this one..

  • @diverwa
    @diverwa 8 лет назад

    Seemed like the warning was for having the apm and radio powered at the same time via USB and main bat. Have had the antennas on rite out of the package. Was able to force bootloader but MP can't identify the radio also a command mode error.

    • @Painless360
      @Painless360  8 лет назад

      Not sure then, best of luck with it. I hope you get it working soon..

  • @Fatpumpumlovah2
    @Fatpumpumlovah2 9 лет назад

    Link from banggood please for the 3dr radio set please.

  • @ytchannel2057
    @ytchannel2057 4 года назад

    sir my telemetry kit lights are not turning solid green.help me

    • @Painless360
      @Painless360  4 года назад

      What troubleshooting have you tried?

  • @dhruvab5
    @dhruvab5 6 лет назад

    Any idea to get it connected to ESP8266?

  • @pradeepj.b8962
    @pradeepj.b8962 6 лет назад

    bro im using 3dr 433Mhz telemetry if i connect my telemetry it shows connection failed if i load settings it shows "invalid com or in use" my os is win10 kindly suggest me the sollution

    • @Painless360
      @Painless360  6 лет назад

      What troubleshooting have you already done?

    • @pradeepj.b8962
      @pradeepj.b8962 6 лет назад

      Painless360 bro Im not did any trouble shooting

    • @pradeepj.b8962
      @pradeepj.b8962 6 лет назад

      And I using mission planner ....not apm planner

    • @Painless360
      @Painless360  6 лет назад

      Without more detail of that you've already tried it's impossible to offer any advice. Happy to help but please watch ruclips.net/video/olIqTiSJHIY/видео.html and come back to me with more detail of what you've tried..
      Reply ·

  • @tathilawijemanne2578
    @tathilawijemanne2578 3 года назад

    does this works with APM 2.8?

    • @Painless360
      @Painless360  3 года назад

      Probably. I've not used this old flight controller for many years. Best of luck..

  • @Amarnath2k2
    @Amarnath2k2 3 года назад

    Telemetry is so useful,than using a wire to connect pix and PC

  • @douglaslavergne7817
    @douglaslavergne7817 7 лет назад

    thanks

  • @shashankgowda1
    @shashankgowda1 8 лет назад

    +Painless360 Hey, so far im able to set up connection between the ground module and the air module, but, when I go to flight data tab and click on connect( baud rate of 57K) a pop up comes up and says done and the next thing that happens is my PC restarts! at first I thought its the USB port, I changed the ports and tried but its the same! My damn PC restarts! Any Idea? the PC runs on win 7 32bit OS

    • @Painless360
      @Painless360  8 лет назад

      Sound like a basic driver problem. I'd delete the device in device manager and try again. Best of luck!

    • @shashankgowda1
      @shashankgowda1 8 лет назад

      +Painless360 hey man, Thanks a ton! It worked! one of my other APM 2.6 shows Bad compass health, and im unable to calibrate the compass. the live calibration tab displays error 99 message and 0 samples are being taken! Do you think the compass is fried?

  • @balajikannan6457
    @balajikannan6457 8 лет назад

    I need to get all those stuffs for my drone suggest me some sites to get those

    • @Painless360
      @Painless360  8 лет назад

      +balaji kannan eBay, Banggood.com, HobbyKing......

  • @mokshpatel6986
    @mokshpatel6986 5 лет назад

    Sir my ground module is my mistake to click in reset to default how can I do

    • @Painless360
      @Painless360  5 лет назад

      I did something similar and luckily was screen recording at the time so could play back the video to get the settings. I’d contact the vendor for help. Best of luck with it.

    • @mokshpatel6986
      @mokshpatel6986 5 лет назад

      @@Painless360 thank you sir i read all pages in your discreetly board

  • @henokhailu7615
    @henokhailu7615 8 лет назад

    Hello again :D You reply thanks not many you tubers do. There are many FTDI cables out there and I am soo lost trying to find the correct one. Guess what I search the internet for telemetry transmission system (I have the clone version) FTDI cable, and there is nothing. Do you know if FTDI cables don't matter, so I can buy any FTDI cable? Are there specific specifications. THANKS AGAIN !!!!

    • @Painless360
      @Painless360  8 лет назад

      +Henok Hailu if you want the real FTDI adapters, I search for 'FTDI Basic '. Best of luck!

  • @illusivec
    @illusivec 9 лет назад

    Hey there, very informative vid. Have you managed to get this thing work with both osd and telemetry?

    • @Painless360
      @Painless360  9 лет назад

      Not personally but if you google it you can find the cable that allows both to be used at the same time..

    • @illusivec
      @illusivec 9 лет назад

      Painless360 I'm talking about this: diydrones.com/forum/topics/3dr-radio-minimosd-no-mavlink
      I can make my own cable, but don't know anything about that CMOS thingy. I guess I'll have to try once mine arrives.

    • @Painless360
      @Painless360  9 лет назад

      Best of luck
      www.google.co.uk/search?q=mtelemetry+radio+cable+apm&sourceid=ie7&rls=com.microsoft:en-GB:IE-Address&ie=&oe=&gfe_rd=cr&ei=bYMAVcb9EvGZ0QWwuoC4CA&gws_rd=ssl#rls=com.microsoft:en-GB:IE-Address&q=telemetry+radio+cable+apm&spell=1

  • @RcBuddy
    @RcBuddy 9 лет назад

    Nice !

  • @MartijnvanGene
    @MartijnvanGene 8 лет назад

    What kind of range would I get on 433mHz 100mW on stock dipoles?

    • @Painless360
      @Painless360  8 лет назад

      No idea, sorry. I'd look in the forums..

    • @MartijnvanGene
      @MartijnvanGene 8 лет назад

      +Painless360 thanks, I will do just that. You should win an award for your videos BTW. on a side note, how about an instructional to make apm understand sbus? I've done it with a 2.6, but can we do it on the mini?

  • @asutoshprakash
    @asutoshprakash 7 лет назад

    can it be used for fpv transmission?

    • @Painless360
      @Painless360  7 лет назад

      Nope, the data rate is no where near fast enough..

  • @ranjeety46
    @ranjeety46 7 лет назад

    which is better telemetry system 915 MHz or 433 MHz

    • @Painless360
      @Painless360  7 лет назад

      It's not a case of what's better, its a case of what's legal to use in the country your in. Some more detail here - ardupilot.org/copter/docs/common-telemetry-radio-regional-regulations.html#common-telemetry-radio-regional-regulations

  • @johncarr123
    @johncarr123 9 лет назад

    Do you have a video installing OSD on 3.1?

    • @Painless360
      @Painless360  9 лет назад

      A video is planned. Following the other MinimOSD videos on the channel and the pinouts from the APM guide online it should be relatively straightforward. Only issue is finding the cleanest, mot useful OSD firmware for the MinimOSD..
      Let me know if you attempt it and how you get on..

    • @claudiufarcas
      @claudiufarcas 9 лет назад

      Painless360 Hi, thank you very much for the APM series, all of them are very informative and really helped me having confidence on steps I am following in my builds. I plan to use MinimOSD and MAVlink radio with APM mini 3.1. Is it possible to connect them both on the same telemetry port? Is it just a Y cable splitting or there is something more complex needed in between?

    • @Painless360
      @Painless360  9 лет назад

      You can connect them both but this pulls the signal too low for both to use - see diydrones.com/forum/topics/3dr-radio-minimosd-no-mavlink

    • @johncarr123
      @johncarr123 9 лет назад

      Just got my 3.1 today. Looking forward to testing

  • @KhairinAnwar
    @KhairinAnwar 7 лет назад

    can i calibration my apm 3.1 with that ??

    • @Painless360
      @Painless360  7 лет назад +1

      +Khairin Anwar yes you can! :)

  • @LondonMus
    @LondonMus 5 лет назад

    Love this video. Worked first time for me but now they constantly blink green lights and can’t find each other. I’ve tried downloading older drivers & also tried windows driver reassignment but nothing works anymore. The info for one plugged into the pc always comes up but not on the one hooked up to the rover. Just can’t get them to have solid green lights anymore. Any advice would be greatly appreciated. I’m using the following:
    powerday®3DR Radio Wireless Telemetry Kit 433Mhz Module for APM2.6 APM2.7 Pixhawk PX4 www.amazon.co.uk/dp/B00Q7US5NG/ref=cm_sw_r_cp_api_i_EEjpCbHSDK62G

  • @blazvovk3775
    @blazvovk3775 7 лет назад

    Where can i buy thats parts?

    • @Painless360
      @Painless360  7 лет назад

      The usual places, your local hobby-shop, eBay, Banggood, HobbyKing, etc.

  • @ajuscochillmafia8617
    @ajuscochillmafia8617 6 лет назад

    can it fly without telemetry ???

    • @Painless360
      @Painless360  6 лет назад +1

      +Cesar Montemayor yes, see the earlier videos in the series..

  • @andreasraenatomantovani7424
    @andreasraenatomantovani7424 7 лет назад

    what mhz this telemtry?

    • @Painless360
      @Painless360  7 лет назад

      915 or 433 MHz depending on location..

    • @andreasraenatomantovani7424
      @andreasraenatomantovani7424 7 лет назад

      what the diferent 915 and 433??

    • @Painless360
      @Painless360  7 лет назад

      Apart from the frequency it uses, very little. Lots more detail you can read up about in the documentation for APM - ardupilot.org/copter/docs/common-sik-telemetry-radio.html

  • @makerhobbyist5407
    @makerhobbyist5407 7 лет назад

    Where is u r next counting Video bro

    • @Painless360
      @Painless360  7 лет назад

      +gowtham bobby sorry, not sure what you mean..

    • @makerhobbyist5407
      @makerhobbyist5407 7 лет назад

      I have seen u r 2015 Video , where is u r counting Video of connecting fdi to air telemeter

    • @Painless360
      @Painless360  7 лет назад

      Sorry, still not sure are you sure you mean 'counting'.. Apologies if I'm being slow..

    • @makerhobbyist5407
      @makerhobbyist5407 7 лет назад

      hmm , let it be leave that matter . im having doubt about uplodig frameware into air telemeter . is that must to uplode or no need of uploding ?

  • @hf8373
    @hf8373 8 лет назад

    how to make mavlink live in the internet

    • @Painless360
      @Painless360  8 лет назад

      Is that a question? If you find out the answer to that one, let me know!

    • @hf8373
      @hf8373 8 лет назад

      because mavlink radio will only cover 2 mile i think and it is not enough for what i am trying to do

    • @Painless360
      @Painless360  8 лет назад

      Be careful - most countries will have legal limits far less than that ;)

  • @9anani
    @9anani 9 лет назад

    I tried to update firmware on my Air radio and there after it stopped connecting to ground module and the red and green LEDs are blinking continously. Even after successful downgrading and upgrading both the modules and settings, the air radio keeps blinking red and green when i connected to APM2.6 , you can see the video here ruclips.net/video/Ln3QufT1GTI/видео.html
    Please Help me

    • @Painless360
      @Painless360  9 лет назад

      Sri Harsha the link light should be solid to show a link. I would re flash separately and confirm channel numbers and check for breaks in the antenna and soldering. Best of luck!

  • @NRenzoni
    @NRenzoni 9 лет назад

    The link to the ardupilot website is no good.
    I believe this is the correct link:
    copter.ardupilot.com/wiki/common-optional-hardware/common-telemetry-landingpage/common-3dr-radio-version-2/
    btw love your channel!

    • @Painless360
      @Painless360  9 лет назад

      N Renzoni With the retirement of the APM lots of the links have changed - thanks for the message.

  • @bugrahantunc5109
    @bugrahantunc5109 8 лет назад

    qav 210

  • @PJgearhead
    @PJgearhead 8 лет назад

    Where in hell do you buy these from??

    • @Painless360
      @Painless360  8 лет назад

      +PJgearhead Banggood.com, eBay. All the usual places. Search for '3dr radio 433' to find them ;)

    • @PJgearhead
      @PJgearhead 8 лет назад

      +Painless360 Thanks yeh found em, but none mention compatibility with 3.1, and I can't find the original 3DR ones, all the ones I have found are Chinese.

    • @Painless360
      @Painless360  8 лет назад

      So long as the cables will fit they should work. Best of luck..

  • @LeviMaston
    @LeviMaston 9 лет назад

    Thank you so much! I couldn't have got my APM set up without your videos.