How To Repair A Ceramic Disc Tap
HTML-код
- Опубликовано: 14 май 2024
- Want to find out how to fix a dripping tap? Then this tutorial can help, showing you how to replace to a ceramic disc tap. For loads more how-to videos head over to www.videojug.com
Subscribe! ruclips.net/user/subscription_c...
Check Out Our Channel Page: / videojugdiygardening
Like Us On Facebook! / videojug
Follow Us On Twitter! / videojug 
Хобби
Step 9 : call the plumber out because you'd had a go, now it's worst then before.😁
😂😂😂
Used to call the landlord now I have bought the house of him FFS 😂
Useful video. No mention of how you choose the correct cartridge though. Are there different sizes?
not mentioned in this video, but there is a rubber washer around the cartridge. if the cartridge is ok but the washer is damaged, then you would only need to replace the rubber washer on the cartridge and then you can put the same cartridge with the new washer back into the sink tap
Absolutely superb - thanks - just the right length and enabled me to do the job
thanks for making it so bloomy easy i am now going to attempt it !!!
Sorry, but that was just dire. All the general stuff, like switching off the supply, checking the supply was off and removing the tap head etc was laboured but the really interesting part i.e. choosing the correct cartridge was skipped over. I did like the voice and the plumber, though.
Very good step by step video for the DIY enthusiast. Not to mention the very attractive demonstrator in the video......
Are you blind? 😂😂😂
What none of these videos cover is how to figure out whether the drip is from the hot side or the cold side of the mixer tap BEFORE you start turning off water supplies and disassembling taps. (Which is to turn one or other supply off and see if drip stops or not.)
great tip, thanks.
Hey Tinkerbell, you should have shown everyone where and what the ceramic disc looks like.....
Thanks. Good n quick. Straight to the point...I've it.
Excellent and helpful.
Excellent video, thank you.
Thanks for video. Did the job for me.
Good presentation thank you
Thank you! I can replace a rubber washer etc. that wasn't my problem. My problem was I couldn't figure out how to remove the headgear. I was nearly going to replace the entire tap.
Agree - this is an excellent video. Very well thought out and presented.
Thank you!
great help thanks
What a lovely voice!
thanks very much...you are diamond!!!
I like the way she looks at the camera, watched it three times, I don't even have a dripping tap.
Females eh? aren't they gorgeous
Women, know your limits! :)
Thank you.
Pretty basic...if first time attempting, good video.
How do you remove the tap head if it won't loosen by hand
Yes please I didn’t get past the unscrewing as the thing is just holding so tight!
2:26 But how do we know which cartridge is faulty, you've just replaced one of them but it might not be the faulty one!! mmmh not quite sure if I should give you my thumb up!
Great video :) thanks for posting - ill try fixing mine now.
Didn't know Peter Pan could do plumbing.
TippTopp81 😂
thanks got no more dripping tap now :D
My wife looks at me like that.
Didn't hold the tap whilst unscrewing the cartridge, which is really bad practice. And as Richard D mentions, the first washer encountered isn't even inside the bloody plumbing, how's it going to make any difference?
A year late but anyway.... Often you cannot get replacement ceramic discs because the sizes are so exact to the tap. Only if the taps are mass produced and very common can you get replacements. Most Plumber will simply advise replacing it with new cartirdges rather than wasting time trying to locate the discs.
What a nice girl. Nice change from the blonde show pony on Handy Mandy's vid.
Sorry, but this is a a load of crap! That 'washer' that she inspected for wear and tear? That wasn't a washer, it was simply a coloured disc to show it was the hot tap..... Please, anyone new to fixing a dripping tap, ignore all you see here.
I agree - and if you try and buy a replacement ceramic washer, you are told you can't if you don't have the original packaging because they are all different (because of EU regulations!) - so you have to buy a new set of taps!!
Also they say anticlockwise without explaining the difference between the hot and cold sides. The cold tap is also anticlockwise, but as it's in the opposite position then you have to turn the wrench/spanner in the other direction to the hot tap. I can see how people would think to turn the cold tap in the same direction and end up tightening the thing.
So what do you say to do as I've got a dripping tap and it's driving me crazy I'm brand new to fixing it so help please and thank you
What happens when the screws are ruined do you drill out the screw and replace?? No one covers this??
+Nobby Bravo Alpha Mine did that too. I just replaced the gland which was about 5 quid.
It might be necessary to disassemble the cartridge and clean it thoroughly in de-scaling fluid. Cartridges are difficult to replace as they come in a wide variety of designs, each differing by irritatingly small measurements. It would be good if the industry standardised.
Not much chance of standardisation,I have 76 outlets to deal with not many the same.When I went to the plumbing outlet the guy in front of me was told easier to replace mixer unit which he did. The guy asked if he tried descaling which he had. Modern plumbing what a joke same goes for toilet cisterns and flush valves. A joke when you want to replace smething quickly.
That is not a rubber washer it is the hot indicator plastic disc being red. Also hold the tap whilst using the spanner otherwise you could have a leak. And I liked the way she isolated the imaginary gate valve the way she was turning nothing in her hand as it would be an isolation valve. 😂
Step 5. The red washer was just telling you, it was the hot tap. Nothing to do with sealing water. How could it?
There is a seal on the bottom of the cartridge, but it's not that one!
Any I do like how firmly you insert the plug on step 2.
She looks like an elf out of lord of the rings
Funny looking kitchen, oh wait nevermind ;)
Is it me or does the woman in the video look a lot like Sciene Officer T'Pol from the TV Show, Enterprise? I am sure Vulcans know how to deal with plumbing... I think in one show, a Vulcan actually DID repair a kitchen faucet! Oh well....
So this is what winona ryder does now
ITS NOT A WRENCH!
A good effort but hey!....using a 5 ton adjustable spanner instead of a much smaller set spanner is bad advice.....try getting that monster into confined spaces!
God damn it to hell and back!! The dual I have seems impossible to open to get at the washer. It drips at the tap, when turned on! Here is a link to a photo of the type of tap. I have included an arrow to show a small hole which must have something to do with removal but I am afraid to break something by applying force where it should not be applied. I placed a mirror underneath to make the hole visible.
prnt.sc/hnfrnj
Someone help please, if are familliar with type of tap.
Step one is to get rid of ceramic taps altogether, mine has dripped since I bought them. I had them replaced with another pair but these are the same. I never had very many problems with taps that had rubber washers before. A plumber told me that these are the most work he has callouts for ( dripping taps), and to never buy these again just stick with the old type with rubbers.
I want to get this message out. I had a dripping tap, hot and cold sides. When off work with man flu, I started to look, turned off the water, then went to bed for two days. In the intervening time my wife and kids tried to turn the water in and grumbled. When I turned the water back on both taps had stopped dripping. With a try. Not the man flu. Turn the water of and operate several times. They now haven't dripped for four days.
Failed at the first hurdle. Setp 1, Use a sharp knife to remove the cover. Step 2, Go to A&E to get your hand stitched after the knife slipped.
Luckily there are only a billion types of cartridge so you will probably get the wrong replacement.
By
there is 5 minutes missing from the video with all the useful information right?
Ah, replace the ceramic tap NOT REPAIR. If you were to repair why bother clean the dirt.
If you want to repair just place a rubber washer ( the same one as the old tap before the ceramic tap ) at the same place as the ceramic tap THIN silicone rubber, yes the tap will protrude slightly but you save $ 7 or $12 dollars. Its much easier with the old tap, just replace the rubber ring. Modern design some are not practical at all.
definitely a lezzer
What a load of rubbish. For a start the red 'rubber seal' she inspects is not a seal, and it's not rubber, it is there just to indicate that it is the hot side. No mention of determining if it is the hot or cold side leaking...?? Visibly inspecting the cartridge rarely gives you any pointers, and wiping it clean won't make the slightest bit of difference. You have to at least dismantle it to look at the ceramic disks. Often it is just the seal at the bottom of the cartridge that compresses internally onto the tap body that is the issue and is easily replaced, but this is not mentioned. For all you DIYers out there that are gonna have a go at this, be aware that there are many different cartridges - fittings vary, spindle length varies and the amount of teeth at the top of the spindle for the tap cap varies. Trying to get hold of the right cartridge can be a chore in itself. Be warned, not all suppliers will supply every type of cartridge and you may find you are hunting around for miles to no avail. And if you buy online, good luck with that... the chances are that you will buy the wrong item. Just my two-penneth as a professional.
Yes I did one on Monday 5 minute job. Switched water on valve leaking, OK 5 minutes to change valve. Then find stop cock on main seized solid Wd40 and 30 minutes to wrangle it free.
ladies you better go and prepare dinner
I hate these rubbish, how easy it is videos. OK switch water off fine. The valve the one you can use a screwdriver on starts to leak. You manage to get the tap head off well they can jam on. You use the wrench without holding the tap body, you can end up wrenching the whole tap off. The leaking valve needs replacing when you find the stopcock it's siezed solid. Yes if your lucky it's an easy job, but it can go seriously wrong sometimes.!
I like a girl with small hands. It makes my chopper look bigger.
that girl is on something
Well at least she got a job done
😂😂😂😂😂😂
What a load of rubbish....
This is replacing the cartridge not a proper repair. You are leading the viewers on incorrectly.
That video is a bit creepy.
She will also need a man to show her how to do the job.
Womansplaining at its best