Mine broke a year ago although i got it off ebay for 3k but hardware wise, it was top notch condition and worked, about a month later it didn't connect to imaging app and no wifi ssid data in the root folder (where the a7iii did have) they said it didn't mean anything when i emailed them, not in those exact words, and then later the stabilisation would not be on at first and wouldn't go into record mode so you have to turn it on and off many times, still have that problem. It wouldn't let me refresh version 2.11 so i'm trying now to do it. Stabilisation seems as shaky as the old camera because of some software issue and i hadn't updated at all since buying so i dont know why it happened. EDIT: updated now it's not even letting me do the quick on off trick to bypass the camera error message.
I took the gamble. Updated from 2.01 to 2.15, then 3.01. I used my friend's PC instead of using my Mac just in case, as I know some people that used Macs had problems. My update worked. So far everything's good.
Text for exposure, certainly an opinion. Autofocus was actually enhanced for me, but I had to redial in all of my settings to get it the way I like it.
@@fofopho No I mean the text is to small now on the bottom for shutter speed, exposure, aperture and white balance. It use to be bigger and easier to read.
@@heynow2880 they release the 3.2 .same issue. I found a tread on reddit where the issue with the samyang lens is fixed by updating the lens firmware! Will try that and update
Might be some human error involved with these apparent bugs. Make sure to set up all of your autofocus settings newly. Tracking speed, stickiness, focus assist, and the like. I can confirm that the autofocus is wayyyy stickier in tricky situations now if you’ve got it all setup correctly. All of my lenses are newer than the old GM, so that also might be something that is causing problems. Also, 3rd party glass may have unresolved issues (as seen in the video), but the update itself is banging especially all the little features that no one is talking about (like being able to use focus peaking paired with AF and Focus Assist). For reference: I did the update on 3 separate a7s III bodies purchased over the course of a few years (so different production cycles). Been shooting with the following lenses without any issues: 24-70 2.8 GM II 50 1.4 GM 24 1.4 GM 35 1.4 GM 16-25 2.8 G One of my bodies used to switch randomly to photo mode and back in the middle of shooting. That glitch was also resolved by this update (no idea how but ran it for 2 hours without issue just last week). So this update ultimately may have saved me a bunch of money I would have spending replacing that body (probably). Don’t forget you can run the update again off of a fresh download and that may resolve issues that you’ve encountered. Avoid 3rd party batteries if possible as well which can be fine, but can also contribute to a host of issues during and after an update if the power output isn’t consistent.
I don't have any of these issues after the firmware update on my A7S3. I updated from 2.10 to 2.15 to 3.01 I'm not sure why people are having issues. I did my buy camera recently within the last year and half. I'm not sure if that has something to do with first generation models. I don't even think that's a thing but maybe it is. The only thing I did notice, but I'm not sure I couldn't do this before the firmware update is that my back-button focus doesn't work in Manual Focus mode, but it does work on my A7IV. It will work if I switch to AF-C mode. To clarify, when I toggle on Manual Focus, I can hit my AF-on button which activates AutoFocus and I can get a focus pull that way but still be in manual mode. I don't usually shoot photos with the A7S3 and I like having both camera buttons mapped similarly so I just noticed this recently and I can't find anywhere why I can't do this. People claim the contacts on the lens are dirty. Lol...if that were the case, I wouldn't be able to pull focus in AF-C mode either.
I’ve done the update on 3 a7s III’s with no problems at all. In fact, the update has been a godsend in many ways. Ran the update using my PC, because the Mac firewall was giving me issues. I think the issues, while major, are pretty rare. If you don’t need the features, you can skip the update, but it was well worth it in my opinion.
Recently when I was filming, there were times when I couldn't adjust the aperture and speed.. I had to turn off the camera and restart it and it was normal. I'm not sure if this is an error due to the update.
When it comes to controlling the camera via Bluetooth (e.g. turning on recording from the DJI RS3 gimbal), simply enable the camera control via Bluetooth function in the camera's Bluetooth menu. After updating, it is disabled by default.
How are these issues going …any change? I can’t even get my installer program going so maybe this is good thing. Have you heard of any install problems? Thanks
Bluetooth / WiFi issue for me after 3.01. It’s definitely firmware because I can get it to go away for a day or so if I do a total Initialization / Factory Reset. So the hardware isn’t dead but Sony support says send it in for a PAID motherboard replacement.
@@TomWadeCinethey released a v2.02 update last week for Alpha 1, so maybe there’s hope. It got 2.00 and 2.01 updates around the same time A7S III got the 3.00 and 3.01 updates. So the 2.02 is a1’s third update this year 🙏
So my Bluetooth unit also showed this error. "Malfunction" im out of warranty, what do i do now? I use my ipad always to monitor the scene. Anybody knows how much the repair would cost?
@@TomWadeCine such a disappointment on Sony's part. I literally bought a Portkeys monitor to have wireless control and then upgraded the firmware and lost it.
I realized the battery is draining when the camera is off! I only realized because I had fully charged batteries left it inside the camera and when I returned it went from 100% to 38% and it was hot! And mind you it was OFF! with no way to accidentally turn on that was not the case and even then in the past it would shut off on its own.
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
Confirmed: WiFi and Bluetooth issues still there with 3.01 😢
Having the same issue. Any luck with yours ?
And on the 3.02 as well
Mine broke a year ago although i got it off ebay for 3k but hardware wise, it was top notch condition and worked, about a month later it didn't connect to imaging app and no wifi ssid data in the root folder (where the a7iii did have) they said it didn't mean anything when i emailed them, not in those exact words, and then later the stabilisation would not be on at first and wouldn't go into record mode so you have to turn it on and off many times, still have that problem. It wouldn't let me refresh version 2.11 so i'm trying now to do it. Stabilisation seems as shaky as the old camera because of some software issue and i hadn't updated at all since buying so i dont know why it happened. EDIT: updated now it's not even letting me do the quick on off trick to bypass the camera error message.
I took the gamble.
Updated from 2.01 to 2.15, then 3.01. I used my friend's PC instead of using my Mac just in case, as I know some people that used Macs had problems.
My update worked. So far everything's good.
After updating to 3. 0 feel footages are too much vibrating
I havent update mine yet, but it seems to combine the recoding time for both sd cards instead of individually
Yeah the autofocus doesn't work as well. Also the text for exposure is way to small. The new stuff is not worth it.
Text for exposure, certainly an opinion. Autofocus was actually enhanced for me, but I had to redial in all of my settings to get it the way I like it.
@@fofopho No I mean the text is to small now on the bottom for shutter speed, exposure, aperture and white balance. It use to be bigger and easier to read.
i have the same issue..almost fked. y sony is numb?
@@LemontreePictures They might have fixed it on 3.0.1 but I haven't checked
@@heynow2880 they release the 3.2 .same issue. I found a tread on reddit where the issue with the samyang lens is fixed by updating the lens firmware! Will try that and update
I use 16-35mm gm i lense and got auto focus problems it's on human eye detecting i get not sharp videos ...
Sorry to hear that. Sony really need to roll out a fix for all of this. Very strange
Might be some human error involved with these apparent bugs.
Make sure to set up all of your autofocus settings newly. Tracking speed, stickiness, focus assist, and the like. I can confirm that the autofocus is wayyyy stickier in tricky situations now if you’ve got it all setup correctly. All of my lenses are newer than the old GM, so that also might be something that is causing problems. Also, 3rd party glass may have unresolved issues (as seen in the video), but the update itself is banging especially all the little features that no one is talking about (like being able to use focus peaking paired with AF and Focus Assist).
For reference:
I did the update on 3 separate a7s III bodies purchased over the course of a few years (so different production cycles).
Been shooting with the following lenses without any issues:
24-70 2.8 GM II
50 1.4 GM
24 1.4 GM
35 1.4 GM
16-25 2.8 G
One of my bodies used to switch randomly to photo mode and back in the middle of shooting. That glitch was also resolved by this update (no idea how but ran it for 2 hours without issue just last week). So this update ultimately may have saved me a bunch of money I would have spending replacing that body (probably).
Don’t forget you can run the update again off of a fresh download and that may resolve issues that you’ve encountered. Avoid 3rd party batteries if possible as well which can be fine, but can also contribute to a host of issues during and after an update if the power output isn’t consistent.
I don't have any of these issues after the firmware update on my A7S3. I updated from 2.10 to 2.15 to 3.01 I'm not sure why people are having issues. I did my buy camera recently within the last year and half. I'm not sure if that has something to do with first generation models. I don't even think that's a thing but maybe it is. The only thing I did notice, but I'm not sure I couldn't do this before the firmware update is that my back-button focus doesn't work in Manual Focus mode, but it does work on my A7IV. It will work if I switch to AF-C mode. To clarify, when I toggle on Manual Focus, I can hit my AF-on button which activates AutoFocus and I can get a focus pull that way but still be in manual mode. I don't usually shoot photos with the A7S3 and I like having both camera buttons mapped similarly so I just noticed this recently and I can't find anywhere why I can't do this. People claim the contacts on the lens are dirty. Lol...if that were the case, I wouldn't be able to pull focus in AF-C mode either.
I’ve done the update on 3 a7s III’s with no problems at all. In fact, the update has been a godsend in many ways.
Ran the update using my PC, because the Mac firewall was giving me issues.
I think the issues, while major, are pretty rare. If you don’t need the features, you can skip the update, but it was well worth it in my opinion.
I’m not sure what is going on with mine but Bluetooth and wifi still don’t work even with 3.01
Haven't you had any Bluetooth or wifi problems?
How's the battery life for you? @fofopho
Yes, Bluetooth and Wi Fi don't work even with the 3.01 update
Battery life issue is DEFINITELY real. It runs hot when charging and I am getting less battery life after the update.
Same issue with WiFi and Bluetooth for me as well.
Recently when I was filming, there were times when I couldn't adjust the aperture and speed.. I had to turn off the camera and restart it and it was normal. I'm not sure if this is an error due to the update.
I havne't experienced that but I am experiencing overheating now.
When it comes to controlling the camera via Bluetooth (e.g. turning on recording from the DJI RS3 gimbal), simply enable the camera control via Bluetooth function in the camera's Bluetooth menu. After updating, it is disabled by default.
bluetooth no longer works with the new update
By which you are talking 3.01? I have 3.0 and it works...
Any update? About to switch to canon lol so annoyed
How are these issues going …any change? I can’t even get my installer program going so maybe this is good thing. Have you heard of any install problems? Thanks
Hi, refer to my first video. I go over installer issues with Mac
Bluetooth / WiFi issue for me after 3.01. It’s definitely firmware because I can get it to go away for a day or so if I do a total Initialization / Factory Reset. So the hardware isn’t dead but Sony support says send it in for a PAID motherboard replacement.
Yeah, it’s very frustrating. I don’t think they will do another firmware update to address this issue.
@@TomWadeCinethey released a v2.02 update last week for Alpha 1, so maybe there’s hope. It got 2.00 and 2.01 updates around the same time A7S III got the 3.00 and 3.01 updates. So the 2.02 is a1’s third update this year 🙏
So my Bluetooth unit also showed this error. "Malfunction" im out of warranty, what do i do now? I use my ipad always to monitor the scene. Anybody knows how much the repair would cost?
I think it’s still a firmware issue and Sony need to address it
WiFi and Bluetooth still an issue in v3.02 😥
same
@@TomWadeCine such a disappointment on Sony's part. I literally bought a Portkeys monitor to have wireless control and then upgraded the firmware and lost it.
Anyone noticing battery life is worse?
Yes, I did
I realized the battery is draining when the camera is off! I only realized because I had fully charged batteries left it inside the camera and when I returned it went from 100% to 38% and it was hot! And mind you it was OFF! with no way to accidentally turn on that was not the case and even then in the past it would shut off on its own.
What a scam. Im not updating my camera and this is def my last Sony camera.