Update!!! Hello everyone 😊As I mentioned before if the part didn’t work I would let you know, so here we go 😅after a few weeks of testing I realized that the part I initially installed was causing my vehicle temp to rise 😮above normal and the 2nd fan was not initiating. I went to my local AutoZone and got one (Sandtech PN: MT4133 $160) and now it’s working great with both fans active and maintaining normal temperature 😊 ✌️ n thanks
Hey, Thanks so much for the video! I just bought the MT4133 on AutoZone. Any update? I see someone in the comments had the same issue coming back after 2 weeks. Is it still working on your side ??
This video was a life saver!!! My fan ran all night and drained my battery…I immediately searched RUclips for a video on what the issue was. Your instructions where very detailed , exact and easy to follow. My nephew who is a beginner at auto work, was able to follow your instructions a fix easily. I didn’t have time to order the part needed it immediately, part was $170 at Auto Zone, compared to $30 on Amazon But that still save a ton of cash by skipping the dealership on this one! Thanks again
Thank you sir!!! I've been trying to get that top wire off but it wouldn't come. I didn't know there was a clip on the back until YOUR video. You're the man! Thanks again.
Excellent… 38 dollar fix. My fan was only running on one side ( there are two) and it was coming on at high speed and then cycling. The new module… both came on… on a cool engine at low speed!! Thank you!!! Carmen
It’s an easy fix, just try to get one from your local parts store 🏬 I bought mine from AutoZone and it’s listed in the description and it is still working from the date I updated the video, thank you 🙏
If I’m standing in front of the car my right fan isnt staying on when the car is off it’s only the right one. I was told it’s the module at the shop. He said to buy module but I might as well get the coolant fan assembly so the module can fit. I know that’s some bull that’s just more money. I can replace the module myself if I had to. I hate how men try to get over on women, but your video has gave me insight. He told me he had to take bumper off and everything. I have a 2014 evogue
@Jackie-sw9gp - Thank you for your comments, with patience I think 🤔 one can do this job, I did not replace the fan and no bumper removal, as the saying goes “more than one ways to do things” this car is a 2012 but we also have a 2014 and the problems tend to follow each other, I have another video about liquid that are the same for both.
I had the same problem, ordered a after market one here in Brazil. After replacing the problem is over but now i have a other problem after using 6 weeks. 2 times the fans didn’t work and my motor was overheating. Maybe the fan module is not working well or u think it should be a other problem?
@@farrukhimtiaz9935 I ordered one online and it was no good 😊 so to prevent you from doing the job twice, just go to your local Autozone and buy, that’s what I did the second time. It’s in the comments the one I bought
Hello this happened while we were far from home and I disconnected the battery, can I connect the battery again and drive safely? I also read that at home while parked I can disconnect the top cable of the module if the fan keeps running and when I need to drive I can connect the cable again, all this until the new part comes?
Yes you can. We just had to disconnect the battery every time we park the car to make sure we didn’t burn out the fan motor or kill the battery 🪫 good luck 🍀
I just installed just as you did. How I know the module is working. Iam riding the car and I dont listen or see the fans going on. How you know for sure its working? My temp look good at the dashboard. Any ideas?
So, is the part still working well? My freelander 2 just got the same problem and i am thinking on buying this aftermarket module, im from brazil, so everything is a bit pricier here...
@@pedrobetencorte6337 yes, I was just giving you an example. The one I put on my car cost around $29 USD and it’s only one screw as illustrated in my video (Amazon or EBay)
You’re welcome @vishals50 but don’t forget this car has a Ford engine in it and I believe the only thing Ford made good was the assembly line. This piece is easy to change just be careful with that one Phillip screw that holding it together. Good luck 🍀
@@AllAboutCarzz Absolutely agree with you my friend, my wife liked it hence we choose this over q5 and have been regretting ever since. Tried to sell it but it doesn't fetch much, stuck in throat every since :)
@@vishals50 my niece like it and don’t want to sell it so it’s like a project car 🚗 right now, happy I can repair it. The first problem we had with this car was a fuel injection sensor (8W839F972AA) in 2020 which we bought for $19 and it’s still going good😊 I am pretty sure something else is coming so look for more videos😁
Update!!! Hello everyone 😊As I mentioned before if the part didn’t work I would let you know, so here we go 😅after a few weeks of testing I realized that the part I initially installed was causing my vehicle temp to rise 😮above normal and the 2nd fan was not initiating. I went to my local AutoZone and got one (Sandtech PN: MT4133 $160) and now it’s working great with both fans active and maintaining normal temperature 😊 ✌️ n thanks
Hey, Thanks so much for the video! I just bought the MT4133 on AutoZone. Any update?
I see someone in the comments had the same issue coming back after 2 weeks. Is it still working on your side ??
@@RiddleTime-TV Hello 👋 mine is still working great. It has been more than a year.
This video was a life saver!!! My fan ran all night and drained my battery…I immediately searched RUclips for a video on what the issue was. Your instructions where very detailed , exact and easy to follow. My nephew who is a beginner at auto work, was able to follow your instructions a fix easily. I didn’t have time to order the part needed it immediately, part was $170 at Auto Zone, compared to $30 on Amazon But that still save a ton of cash by skipping the dealership on this one! Thanks again
My pleasure
Thank you sir!!! I've been trying to get that top wire off but it wouldn't come. I didn't know there was a clip on the back until YOUR video.
You're the man! Thanks again.
My pleasure 🙂thanks for watching
Excellent… 38 dollar fix. My fan was only running on one side ( there are two) and it was coming on at high speed and then cycling. The new module… both came on… on a cool engine at low speed!!
Thank you!!!
Carmen
If over heating occurs… I will try the expensive part 🤞
👍
Appreciate this video so much! Just used it to replaced mine. For the Canadians I got the part for my 2016 from Napa Auto, part number FCM135.
My pleasure
This video was very helpful, and it save me a lot of money!!!! THANKS 😊
My pleasure.
Great video. Detail instructions, well done
@azizaviation - thank you 😊 hope it help, I have a few more videos to post soon of this car 🚙
Thank you so much for this thorough and clear video! I did it!!
My pleasure 😇
Ugh just encountered the same problem. Evoque 2014. Did the aftermarket module work for you? Hopefully an easy fix 🙏 thanks for the video!
It’s an easy fix, just try to get one from your local parts store 🏬 I bought mine from AutoZone and it’s listed in the description and it is still working from the date I updated the video, thank you 🙏
Thank you I have the same problem- will order and fix myself.
You’re most welcome Yalany Moncada - Happy I could help, so far the $29 part in working well😄
Please let me know if this work for you? And which part you chose.
Thanks
Thank you for the superchat
If I’m standing in front of the car my right fan isnt staying on when the car is off it’s only the right one. I was told it’s the module at the shop. He said to buy module but I might as well get the coolant fan assembly so the module can fit. I know that’s some bull that’s just more money. I can replace the module myself if I had to. I hate how men try to get over on women, but your video has gave me insight. He told me he had to take bumper off and everything. I have a 2014 evogue
@Jackie-sw9gp - Thank you for your comments, with patience I think 🤔 one can do this job, I did not replace the fan and no bumper removal, as the saying goes “more than one ways to do things” this car is a 2012 but we also have a 2014 and the problems tend to follow each other, I have another video about liquid that are the same for both.
Hi, someone mixed up the battery polarity on my evoque and my fan has been on ever since. Could it be the same in my case?
I am not sure 🤔 or it is just bad.
I had the same problem, ordered a after market one here in Brazil. After replacing the problem is over but now i have a other problem after using 6 weeks.
2 times the fans didn’t work and my motor was overheating. Maybe the fan module is not working well or u think it should be a other problem?
Hey good afternoon 🌞 that’s a good question, I am investigating the same problem right now🤣🤣
I will keep you updated as soon as I am done.
This is the one I changed to (Sandtech PN: MT4133 $160) no increase engine temperature
Appreciate your help 👍🏼
Pleasure
@@AllAboutCarzz can you please share a link of the website i should order from?
@@farrukhimtiaz9935 I ordered one online and it was no good 😊 so to prevent you from doing the job twice, just go to your local Autozone and buy, that’s what I did the second time. It’s in the comments the one I bought
MT4133 is the part number
@@AllAboutCarzz Another question, Is it mandatory to put the original land rover’s coolant in this car?
Hello this happened while we were far from home and I disconnected the battery, can I connect the battery again and drive safely?
I also read that at home while parked I can disconnect the top cable of the module if the fan keeps running and when I need to drive I can connect the cable again, all this until the new part comes?
Yes you can. We just had to disconnect the battery every time we park the car to make sure we didn’t burn out the fan motor or kill the battery 🪫 good luck 🍀
@@AllAboutCarzz Thanks alot for your help 😁!
I just installed just as you did. How I know the module is working. Iam riding the car and I dont listen or see the fans going on. How you know for sure its working? My temp look good at the dashboard. Any ideas?
That’s why I recommended buying one from auto-zone in my video. I tried a cheaper brand in my temperature was going up high, but I am not 100% sure.
After change the module, no need to resetting the system with scanner? Just pnp?
Correct ✅ PNP
Aside from disconnecting the batter is there a fuse you can disconnect?
I am not sure about a fuse
So, is the part still working well? My freelander 2 just got the same problem and i am thinking on buying this aftermarket module, im from brazil, so everything is a bit pricier here...
Hello good afternoon 🌞😃 yes. Some of the after market parts here are expensive so I can only imagine in Brazil 🇧🇷
I think I mentioned that the gates after market cost about $249 online
@@AllAboutCarzz yeah here i've for about 300 reais, that is roughly 60 dollar
@@AllAboutCarzz the aftermarket fan module
@@pedrobetencorte6337 yes, I was just giving you an example. The one I put on my car cost around $29 USD and it’s only one screw as illustrated in my video (Amazon or EBay)
Yeah I know you can be strong working
Thanks Aidyn
@@AllAboutCarzz Car look like a Range Rover Evoque call oxygen pump speed your welcome.
Thanks for posting, very helpful, facing the same problem with my 2013 Evoque, this car is pure Sh**t
You’re welcome @vishals50 but don’t forget this car has a Ford engine in it and I believe the only thing Ford made good was the assembly line. This piece is easy to change just be careful with that one Phillip screw that holding it together. Good luck 🍀
@@AllAboutCarzz Absolutely agree with you my friend, my wife liked it hence we choose this over q5 and have been regretting ever since. Tried to sell it but it doesn't fetch much, stuck in throat every since :)
@@vishals50 my niece like it and don’t want to sell it so it’s like a project car 🚗 right now, happy I can repair it. The first problem we had with this car was a fuel injection sensor (8W839F972AA) in 2020 which we bought for $19 and it’s still going good😊 I am pretty sure something else is coming so look for more videos😁
@@AllAboutCarzz Thanks for making these videos, BTW where did you bought the Control Unit from ? Ebay or Amazon ?
@@vishals50 Amazon for sure because of the return policy.
What screw driver is that
A small one I found in my toolbox 😂You can use a small one on your ratchet handle.
Let me know how that cheap part works. I've heard they don't last long
Hey Jordan Miller I just installed it a day before this video unload so I will definitely let you, thank you 😊
Just installed one from auto zone $170 may 6 2024 now may 20th 2024 fan stay on again
@@exorcist7788 Hey, I just bought the same one from Auto Zone. Any update? @AllAboutCarzz is it still working on your side?