Civic EG EK Budget Big Brake Upgrade

Поделиться
HTML-код
  • Опубликовано: 4 ноя 2021
  • The Ultimate OEM Big Brake Upgrade for minimal cost goes on the Budget Build Civic Coupe Si. Hope you get some ideas of how you can improve your brakes for cheap with this video. If so let me know below in the comments.
    Parts used were:
    EV1 front brake calipers and carriers - Flip them side to side
    262MM compatible Knuckles / Hubs (4x100 PCD)
    MG ZS180 / ZR160 Front discs 282mm 4x100PCD
    EBC Yellow stuff pads to suit the EV1 Civic Caliper and Carrier (Pads for the car the calipers came from)
    The original brake lines/flexis can be used with this setup no issue.
    Subscribe to stay up to date on the builds
    ruclips.net/user/danayp?sub_....
    ________________________________________
    Follow me on…
    TikTok @Dan_AYP
    Instagram @Dan_AYP
    Twitter @Dan_AYP
    FaceBook @Dan AYP
    ________________________________________
    Want to see the whole EM1 build? CLICK HERE
    • Civic Budget Build
    What about the EG6 build? CLICK HERE
    • EG Civic Build
    ________________________________________
    Thanks again for watching and I’ll see you next time.
    Achieve Your Potential!
    Dan AYP
    #CarVideos #CarBuildSeries #CarRUclipsr
  • Авто/МотоАвто/Мото

Комментарии • 33

  • @Dan_AYP
    @Dan_AYP  2 года назад +5

    So I can confidently say, this upgrade was well worth the small amount extra it cost over just replacing the 262mm discs and oem pads with yellow stuff. It was only like an extra £20! And feels 10x better. These calipers are pretty damn cheap aswell on ebay etc and still fit under oem 15s unlike the ep3 300mm option 👍 Note, you will need to swap them from left to right to enable yhe bleeder to be at the top of the caliper when mounted on the EK EF DC and EG chassis! Thanks for watching

    • @omargovea9075
      @omargovea9075 2 года назад

      Do you know if there’s a way to fit the ep3 front calipers with 15s for a ek? I’m running ex knuckle upgrade.

  • @rjaybruhh
    @rjaybruhh Год назад +2

    *_Dope! Planning to do a swap on my 97 Ek as well. Bigger disks 🥹_*

    • @Dan_AYP
      @Dan_AYP  Год назад

      Yeah the prelude calipers work as they're the same as the dc2 and ek9 calipers 👍

  • @lewischafer3333
    @lewischafer3333 2 года назад +1

    Awesome Content ever Nice OEM big Brake upgrade

  • @Robstervtec
    @Robstervtec 2 года назад +1

    Cracking video pal 👍🏼👌🏼 love the detail as always. Glad you managed to get it all together in the end 😁

    • @Dan_AYP
      @Dan_AYP  2 года назад +1

      Haha thanks, yeah I wasn't sure it would when I first threw the pads in 😂

    • @Robstervtec
      @Robstervtec 2 года назад +1

      @@Dan_AYP must have been a heart in the mouth job pal 😅🙈

    • @Dan_AYP
      @Dan_AYP  2 года назад +1

      @@Robstervtec you can say that again haha

  • @scotlandjose6756
    @scotlandjose6756 2 года назад +1

    hi I'm keith Jose's son, u gave him a shout out in one of ur videos. I would want one too! Nice car!

    • @Dan_AYP
      @Dan_AYP  2 года назад +1

      Maybe soon haha

  • @antonphillipson2388
    @antonphillipson2388 Год назад

    Noob question, but for an EG5 would I need to get EK4 or DC2 front spindles/uprights to run these? I've heard to do the 262mm upgrade to begin with I need those spindles (which I don't).
    So if you're running the 262mm brakes already then this upgrade would be bolt on but if I'm NOT running the 262mm kit I'd need to make the switch first before I upgrade to these?
    Thanks!

  • @steveb19111978
    @steveb19111978 2 года назад +1

    Sick video mate and quite timely as the brakes and discs need replacing on my 208 GTI. How have you found the EBC pads? I’ve seen quite a bit of negativity about them online.✌🏼

    • @Dan_AYP
      @Dan_AYP  2 года назад +1

      Noisy af on occasion, not had them on the edge yet though so I'm hopeful. My issue was they were the only pads about for the ev1 caliper but. They looked very similar to the ek9 dc2 and prelude backing plates so if they are, hawk hp+ pads are going in after. Id highly recommend those if you're still looking for pads mate 👍

    • @steveb19111978
      @steveb19111978 2 года назад +1

      @@Dan_AYP Thanks mate, have a good weekend. 👍🏻

    • @Dan_AYP
      @Dan_AYP  2 года назад

      @@steveb19111978 same to you mate 👍

  • @evanmcdermott8463
    @evanmcdermott8463 2 года назад +1

    Would this work on an 85 accord?

    • @Dan_AYP
      @Dan_AYP  2 года назад +1

      Doubt it, the eg, ek, dc2, em1, eh, ej civics amd integras all share the same hub / knuckle which makes this possible into those chassis providing the pcd and disc offset is correct

  • @GiftedSpecimenz
    @GiftedSpecimenz 2 года назад +1

    Can you use ep3 front calipers for a big brake upgrade dan?

    • @Dan_AYP
      @Dan_AYP  2 года назад

      I know you can but the caliper won't fit under the oem 15s where as this does 👍 plus the discs are harder to source as you have to get ep3 discs redrilled to 4x100 pcd, they're not readily available like these are

    • @GiftedSpecimenz
      @GiftedSpecimenz 2 года назад

      What model of honda do theses front calipers come off? You kept mentioning "ev1" I'm unfamiliar sorry

    • @Dan_AYP
      @Dan_AYP  2 года назад +2

      @@GiftedSpecimenz the 2.0 type S 5 door ep chassis 2001 - 2006

    • @GiftedSpecimenz
      @GiftedSpecimenz 2 года назад +1

      Of course! Nice 1 Deffo going to pursue these now, keep doing these vids I'm literally nearly on par with your em1 now 😂 #inspiring

    • @Dan_AYP
      @Dan_AYP  2 года назад +1

      @@GiftedSpecimenz haha, thanks man, if you know anyone else who would be into this upgrade please feel free to share it with them man 👍

  • @TheHorselemonade
    @TheHorselemonade Год назад +1

    What is a EV1 very confused on this part

    • @Dan_AYP
      @Dan_AYP  Год назад +1

      A UK spec 2.0 k20 5 door ep civic, 170hp

    • @TheHorselemonade
      @TheHorselemonade Год назад +2

      @@Dan_AYP thank you I am from US and we never got that one

  • @TheRoku7
    @TheRoku7 Год назад +1

    What pads? Ev1?

    • @Dan_AYP
      @Dan_AYP  Год назад +1

      Yes mate, ev1 pads. Make sure your discs are exact as 1 guy messaged stating his disc made contact with the caliper carriers

    • @TheRoku7
      @TheRoku7 Год назад

      @@Dan_AYP ahh cool thanks, so ev1 callipers and pads with mg 282 disks.
      Nice1 👍🏼