For those of you who are interested, We've moved on from the Hatchback and picked up a 2000 Honda Civic EX Coupe which will be the new build series on the channel! A ton of great content on the way! Check it out here: ruclips.net/video/zGrGtcJ2qoQ/видео.html
i don’t know if you remember my comments. haven’t been on the phone in awhile, but you keep on putting in that work brother! i try to comment and tell you to never give up and follow your dreams your videos are great been here since the Subaru and im not going anywhere. great job brother 👍
Bro thank you so much for this video, I was scouring the net for a month to see if I can do something like this. Keep up the good work and again, thank you so much.
Hi mate didn’t even no this was a thing after watching this iv ordered the parts to do this and I’m going to attempt it very soon. Thanks for the awesome videos. Keep them coming help people like me out hi from Australia. 👌
Cómo hiciste para ajustar el panel del A/C en su nueva posición ❓❓ ya que en el vídeo no mostraste como hiciste la adaptación con el marco. Te quedó perfecto. Cómo hiciste. Saludos.
Any chance that you could swap the cup holders for the 99 ek cup holders and save some of the fab on the 96 cup holders? The space in the 99 cup holders is a lot larger than
I see that you use the left rounded buton in the dash to doing that, so in that case u can use to another function, and the mid gap u can adapt the hazard light retangular button.
Easier than you think, yes. Worth all the trouble? Not to me personally. This was a fun project that has helped thousands of people so it was worth it in my opinion.
If you use the 2000 bezel and climate controls, you have to pull your dash and swap in the 99-00 AC components that are behind the dash as well as the wiring. This is just an easier alternative for those who don’t want to do that amount of work.
Please bro when u get the chance and find vents let me know!! I’m literally doing mine right now same double din on my 97 civic, and my brothers frustrated at the vents 😭😭😭
Nice video man! Very helpful. Were you able to find a solution to the vents? I'm in the USA and I keep reading that the vents won't fit even if I pry them out and super glue them on the new bezel? Any advice?
I never did find a solution. I have seen people cut the vent section out of the 96-98 bezel and plastic weld it onto the new bezel. That was my original plan, but I've since sold the car.
Thanks for the video bro, I did the same and running off amps off it too. The only issue I have the illumination hasnt been connected. Do you which cable the the orange wire connects to from the factory wires?
You can also find a single din with a 10” touch screen with Apple CarPlay/ android auto (might not be a major name brand) lol. A/C will still have to be relocated tho.
Would a single din fit in there without any modification? Ive been looking to stash my equalizer and a spacer somewhere that I can have easy access to and this looks like the best spot ultimately.
Do you still got the factory radio I need one for my alarm to work it won't work without the factory radio if you take out the factory radio you lose keyless entry
Hey bro the radio you linked says it’s a 10” does that fit inside the benzel? I have one from another place and ordered another tablet and it was way too big sending that one back and was gonna buy the one you linked instead but I just wanted to make sure it was good before having to send back another radio and wait again, thanks again for the video!
Hi there. So I've watched ur video and the only down fall on my side is that my plug is cut off but I got it right to work. Only problem is that I'm struggling to back the illuminate backlight on my honda. So when I drive at night I can't see the volume up or down button. So I'm struggling to get the back light wire in the loom. But everything else is working fine. Thanks
Someone is selling this exact head unit close to me for $60 so I was thinking of buying it, but what I was wondering was will it fit in the bezel. It's a 10.1 inch display but I'm assuming the backing part is 9 inches which is what fits into the actual bezel. Correct me if I'm wrong please!
Hey the double din you added in the link says it's a 10.1 inch not 9. Was that the right one? Just want to clarify because in your video you say 9 inch
lol you never mentioned what the wire hanging from the relocated ac was i rember you saying something about thoes usb ports is it thoes that are hanging from the relocated ac if so im totally fine with that infact i consider it a plus because you dont have to fiddle with any dam cigarette lighters just to charge your phone so all in all its got a bit of a modern look but still keeps the really old and specials parts of the car well know and not to dramactically modern like most other cars where they have fancy ass seats and shit i like the older cars and older looks better but the double din really dose clash with that car its perfect as the old radio was outdated and looked bad and witha decent clean up i must say it dosent look bad it looks pretty good so thumbs up to you man good job
@@BlueCollarCriminal I can check. Normally if you just type in the brand and make sure it says 9" you're good to go. I know they go in and out of stock quite a bit.
No I have this exact one and it’s really really slow every time you have to start a hotspot for it to have internet and it’s really garbage for real. Reaction time from the touch screen is slow opening an app takes for ever. Gps apps work terrible they run really rough, you’re car emblem and the map isn’t even centered and sometimes at stoplights the map turns 180 degrees so you’re looking from the front to the back of you’re route. Basically everything but worth it it’s just slow Chinese crap it’s lots of work and you only get irritated by it so you’re better off with a great quality Bluetooth radio and a high quality phone holder 😅
I have two 98 civics And both were converted over to the E K9 climate controls it is super simple you just need the basil and controls And instead of modifying anything just go to the junkyard and pull out an E K9 AC Box And you can remove your AC Box and install this one put your dashboard back in and plug everything in simple plug and play no muss no fuss. This is the absolute truth there ARE other ways Doing it you just a small wire harness from the E K9 ac box And the little actuator that controls the heater valve it boats in easy-peasy And the cable that controls the heater valve comes with IT .it.just bolts in. the AC boxes are identical. And as far as having to Modifying the bezzle that's absolute bullshit
I never said there weren’t other ways to do it. This is just most simple way to do it. Not many people want to pull their whole dash and swap the AC box just to do a radio. This tutorial is for those people. For this setup, if you want your stock vents to work with this bezel you DO have to modify your bezel. No need to call bullshit there.
I'm a hoarder and keep all of my OEM parts in the event I decide to sell the car, the new owner will have all the original stuff. They might not even care, but me as a buyer, I love it when people keep all the OEM stuff!
Well can't be too mad i don't know how this hasn't existed before but i already did the complete 99-00 black interior swap on my em1 clone But at least i ain't gotta do it again
just letting everyone know, the radio bezel he has linked is NOT the right size it’s a little too small so the screen he has linked sits over the insert that it should go into.
Unfortunately it's not that simple. The 99-00 climate controls are electronic, whereas the 96-98 climate controls are cable driven. If you use the 99-00 bezel, you will have to do a bunch of wiring for the climate controls to work properly.
For those of you who are interested, We've moved on from the Hatchback and picked up a 2000 Honda Civic EX Coupe which will be the new build series on the channel! A ton of great content on the way!
Check it out here: ruclips.net/video/zGrGtcJ2qoQ/видео.html
Watch Jonathan chow I believe he has a ek and he got the vents in pretty neatly Nice video thoo
@@anthonyalvarado5855 I no longer have the hatch and no longer have a need to fix the vent issue.
@@OldieProductions oh okay I didn't see that you moved on my bad 😂 good luck with the next project 💪
@@anthonyalvarado5855 No problem man, hatch was a great car but I’m loving the coupe.
@@OldieProductions that is true bro I want a get a coupe but I can't find a good one so for now I'ma keep building my hatch
i never knew this about the 96-98 civic dash. makes me very grateful to own a 99
99-00 is definitely superior.
I have 98 civic and been wanted a doubled in for a long time. Thanks for making this video!
i don’t know if you remember my comments. haven’t been on the phone in awhile, but you keep on putting in that work brother! i try to comment and tell you to never give up and follow your dreams your videos are great been here since the Subaru and im not going anywhere. great job brother 👍
Thank you for taking the time to make this video. I've been waiting for a video like this. Exactly what I needed.
Got the climate control relocated it was a pain but waiting for my new double din screen thanks so much!!
Bro thank you so much for this video, I was scouring the net for a month to see if I can do something like this. Keep up the good work and again, thank you so much.
No problem man. I had the same issue, couldn't find hardly info on it so I wanted to make this for everyone!
For anyone that wants to go the extra mile and get the vents to fit flush you will have to a jdm or edm bezel to swap them out
Thank you, I was looking for that harness adapter for a long time, now I will ship to my parents and they bring it to Brazil 😁
Hi mate didn’t even no this was a thing after watching this iv ordered the parts to do this and I’m going to attempt it very soon. Thanks for the awesome videos. Keep them coming help people like me out hi from Australia. 👌
The civics here in Australia have that style vent that would fit
All the videos on this are LHD cars that are using the Facia for RHD, so we get lucky, plan on doing this swap soon so no worries for me.
Can you send me a link to order them?
@@heyhey4424 sorry man don't have a link
brooo thank you sooo much this literally made me so happy! i thought there was no way i could have it! you saved me!!!🙏
Thank you so much its exactly what i was looking for
Thanks for this! Mine came with some different single din unit, but it doesn't have Bluetooth so Def looking to upgrade and double din would look sick
For sure, glad the video helped!
On AliExpress for the radio panel it says left or right which one do I need I have a 1997 Honda Civic hatchback
It just means LHD or RHD. I don't think it matters since the bezel is completely symmetrical, but just go with whichever one your car is!
@@OldieProductions oh ok thank you
Thanks fam came from Facebook🤘
No problem, hope this helps!
And did you use the left or right bezel?
Cómo hiciste para ajustar el panel del A/C en su nueva posición ❓❓ ya que en el vídeo no mostraste como hiciste la adaptación con el marco. Te quedó perfecto. Cómo hiciste. Saludos.
I have been looking for ever !
I did as well! I'm glad this helped!
Any chance that you could swap the cup holders for the 99 ek cup holders and save some of the fab on the 96 cup holders? The space in the 99 cup holders is a lot larger than
Bro this video is very helpful just curious where did you plug your phone for car play?
About this gap between the vents you can adapt a hazard lights button to fit in. that will be beautiful!
I see that you use the left rounded buton in the dash to doing that, so in that case u can use to another function, and the mid gap u can adapt the hazard light retangular button.
Another modification that will be beautiful is the steering wheel. U can adapt of the Honda City 2023
There's a video of a brazilian guy that adapted the steering wheel of new civic 2016. But the style of city 2023 its much superior
ruclips.net/video/JlXSgnqbhvY/видео.html&ab_channel=TransformersCar
Sorry about my english
Love your video
Cheering from Brazil
This is useful, I had a 98 hatch, I ended up putting a single din Kenwood excelon flip out screen
How is it working out - does the flip out block the AC vents?
Did you find the correct vents for this trim setup?
Awesome video brother! Did the double din come with a microphone to install for phone calls? Or does it have a connection that supports that?
I’m 99% sure it did come with a microphone
I just swapped the whole dash from a 99-00 on my 98 easier than you think 5-6 hrs of labor and it’s much cleaner.
Easier than you think, yes. Worth all the trouble? Not to me personally. This was a fun project that has helped thousands of people so it was worth it in my opinion.
Gonna be doing this soon, great vid you even have the messed up vents like I do lol
My 2001 Civics Climate controll is manual too.
Ive never seen a Electronic controll here in Germany :(
If you use a 2000 civics radio bezel you don’t have to relocate the ac components and the vents look way better without that large dip
If you use the 2000 bezel and climate controls, you have to pull your dash and swap in the 99-00 AC components that are behind the dash as well as the wiring. This is just an easier alternative for those who don’t want to do that amount of work.
When ordering this it came with different options what is the correct one to choose when buying ?
Please bro when u get the chance and find vents let me know!! I’m literally doing mine right now same double din on my 97 civic, and my brothers frustrated at the vents 😭😭😭
I’ll do my best to make something work!
Links to a 9 inch bezel from Aliexpress, and a 10 inch screen from Amazon...
Bruh. They don't fit together.
Nice video man! Very helpful. Were you able to find a solution to the vents? I'm in the USA and I keep reading that the vents won't fit even if I pry them out and super glue them on the new bezel? Any advice?
I never did find a solution. I have seen people cut the vent section out of the 96-98 bezel and plastic weld it onto the new bezel. That was my original plan, but I've since sold the car.
Would this work the same with a 95 civic dx? I need answers 😄
Did you screw the headunit brackets into anything else or did you push it in and let the dash clips hold it in?
The head unit itself screws into the bezel on both sides.
Beast bro
Whats the difference between the left and right bezel? Which should i buy?
It just means LHD or RHD, but I don't think it matters for this specific bezel. Definitely go with whichever your car is.
Thanks for the video bro, I did the same and running off amps off it too. The only issue I have the illumination hasnt been connected. Do you which cable the the orange wire connects to from the factory wires?
Honestly I have no idea. My unit is super dim, yours might be the same. Check out my review video!
Did you cut the white tabs off the climate control to make it fit? I can’t figure it out on the video.
I don’t recall cutting anything on the climate control.
it almost looks factory incredible!
Thank you!
You can also find a single din with a 10” touch screen with Apple CarPlay/ android auto (might not be a major name brand) lol. A/C will still have to be relocated tho.
Dónde conseguiste las rejillas de l aire acondicionado
Is it possible for the 1995 civic?
I have the same Display but it’s with android. Why do you have apple car play?
Hi, im pretty sure the vents is a direct fit from a EUDM/ europe model since they are different
You’re right! I’m looking into buying a set and seeing if they’ll fit instead of doing a bunch of cutting.
Where can you buy those from
@@tunemyk24 depends where u live. In europe you find them in every junkyard
@@OldieProductions could you post a link to them that would be a major help or tell me what to look up
@@96ziggix I’m in the USA,any help ?
U said it’s a 9” face display but the link u put in us for a 10.1. Inch screen. Is that the correct one to order?
It is 9" display. I originally linked the 9" but I believe it is now discontinued. But you definitely need 9" and not 10.1"
Would a single din fit in there without any modification? Ive been looking to stash my equalizer and a spacer somewhere that I can have easy access to and this looks like the best spot ultimately.
A single din would fit into the stock bezel no problem.
Can you do this for 1999-2000 civic?
How did you get the car play on it
Two plugs come out the stock radio white and green dose the green plug not need to be used ?only the white power connector?
i know this us a year later but one of plugs are for the clock and the other is similarly useless with the screen
Any update on the vents situation?
Not just yet. Out of town this weekend, will be diving into it next week!
@@OldieProductions im following this little project .. I just ordered the bezel
i bought this but mine didnt come with the bracket. are the metal brackets entirely necessary?
Do you still got the factory radio I need one for my alarm to work it won't work without the factory radio if you take out the factory radio you lose keyless entry
My hatch is a CX so it has none of those features. I do have the radio, but I keep all of my stock parts. Check your local junkyards!
Thank you so much this! I was gonna relocate the my single din radio to near where the cup holders are until this.
Glad to help! Let me know how the install goes!
@@OldieProductions will do, in the future if you come across vents that fit please link them.
Im a total idiot so imma ask ... What did you use to trim the air control relocation area
Dremel tool!
Did you end up using the gps and microphone antenna?
Anything for a 92 Civic?
Do I pick Right or Left on the Bezel
It just means RHD or LHD. I don’t think it really matters since the bezel is symmetrical.
@@OldieProductions Awesome, appreciate it, just bought it. how have you enjoyed it so far?
@@creepycam loving it so far. I posted a review on the setup if you want to check that out!
I think the vents from an EU model EK/EJ would fit that surround.
Correct. I haven’t looked into it too much but I’m considering doing that.
Where can we order them?
Thanks for this just ordered bezel and gonna order the radio soon. Did you find a way around modifying for ac vents?
I did not. There are actually a few videos out there now of people with solutions.
Do you know the radio in the bio is 10.1 inch did I buy the wrong radio I bought all the links in video
Hey bro the radio you linked says it’s a 10” does that fit inside the benzel? I have one from another place and ordered another tablet and it was way too big sending that one back and was gonna buy the one you linked instead but I just wanted to make sure it was good before having to send back another radio and wait again, thanks again for the video!
I believe the 9” may be discontinued or you need to do a little bit of digging to find it.
Is the radio you used in the video the 10” one?
@@OoKaKooshoO No.
The link you provided to the radio that you used for the hatchback keeps coming up as a 10 in radio. Is your radio a 10 inch and not a 9 inch?
9” is the correct size. I believe the one I used is now discontinued so the link goes to the 10”.
@@OldieProductions Appreciate the reply. I found a 9-inch. I'll give that one a try. Thanks.
What’s the solution for the vents?
Hi there. So I've watched ur video and the only down fall on my side is that my plug is cut off but I got it right to work. Only problem is that I'm struggling to back the illuminate backlight on my honda. So when I drive at night I can't see the volume up or down button. So I'm struggling to get the back light wire in the loom. But everything else is working fine.
Thanks
Someone is selling this exact head unit close to me for $60 so I was thinking of buying it, but what I was wondering was will it fit in the bezel. It's a 10.1 inch display but I'm assuming the backing part is 9 inches which is what fits into the actual bezel. Correct me if I'm wrong please!
Only 9” fits
@@OldieProductionswhy you link to a 10.1” product?
@@beboystyle620 My link originally went to the 9” unit. I would assume that it’s either sold out or they don’t make it anymore.
Hey the double din you added in the link says it's a 10.1 inch not 9. Was that the right one? Just want to clarify because in your video you say 9 inch
You need 9”. I think the original product is discontinued so the link changes to the 10.1” Option. You definitely need 9”
@@OldieProductions thanks for the quick reply!!! Better stop my purchase lol
So you said this radio was 9in, but link is for the 10.1" radio, do I need the 9in or the 10.1"? Way different prices
You need 9” because the bezel is 9” as stated in the video.
@OldieProductions I am getting everything right now, at this moment, I want to do this so bad, it's been 7 years of no music
@@OldieProductions does it matter if it's the android 10 or 11 version, I'd rather it be newer?
@OldieProductions my phone version is 13, so I figured I'd probably need the 11 version, I have a pretty new android, S22 ultra+
@@CallMeLogic95 I have an iPhone so I have no idea which version you need.
Watch Jonathan chow he did a great job with his hatch and did the same conversion too
lol you never mentioned what the wire hanging from the relocated ac was i rember you saying something about thoes usb ports is it thoes that are hanging from the relocated ac if so im totally fine with that infact i consider it a plus because you dont have to fiddle with any dam cigarette lighters just to charge your phone so all in all its got a bit of a modern look but still keeps the really old and specials parts of the car well know and not to dramactically modern like most other cars where they have fancy ass seats and shit i like the older cars and older looks better but the double din really dose clash with that car its perfect as the old radio was outdated and looked bad and witha decent clean up i must say it dosent look bad it looks pretty good so thumbs up to you man good job
Yes, that wire was for the USB!
hey man can you give the dimentions of the hole so i can see if i can put one like urs in my 99 hrv
I'm not sure of the dimensions for the radio bezel. All I know is it's measured from one corner to the other diagonally. Hope that helps!
@@OldieProductions THANKS !!
you used a 10.1 inch radio on a 9 inch bezel?
No. 9” head unit on a 9” bezel. The link sends you to a 10.1” for some reason.
Do you have a link to the 9 inch unit. I wanna make sure I don’t purchase the wrong one or is it the exact same as the one you have
@@BlueCollarCriminal I can check. Normally if you just type in the brand and make sure it says 9" you're good to go. I know they go in and out of stock quite a bit.
Dope! Appreciate the effort +1 sub
You're a legend! Thank you!
Do you have wiring diagram for android radio?
I’m not sure what you mean by that.
Can I just verify that you’re using a 9 inch display? The link takes me to the 10 & 9 so I’m just unsure. Thanks!
Yes 9” for sure. I had the same issue, being led to the 10.1.
Where did u order the bezel from
Link is in the description!
Hey the bezel is 9 inches and the radio is 10.1 does that matter or…?
You need the 9” radio.
what size is the radio 9 inch by what like length and width?
Just 9”. Double fins are measured corner to corner I believe.
So your 10.1 inch radio fit into the 9” bezel?
No you need 9”. For some reason the link goes to the 10.1”
Thanks Bro!
Of course! Glad to help.
Does the CarPlay work well?
No I have this exact one and it’s really really slow every time you have to start a hotspot for it to have internet and it’s really garbage for real. Reaction time from the touch screen is slow opening an app takes for ever. Gps apps work terrible they run really rough, you’re car emblem and the map isn’t even centered and sometimes at stoplights the map turns 180 degrees so you’re looking from the front to the back of you’re route.
Basically everything but worth it it’s just slow Chinese crap it’s lots of work and you only get irritated by it so you’re better off with a great quality Bluetooth radio and a high quality phone holder 😅
would this fit on my 98 honda civic?
Yep!
Could you possibly link the harness adapter or where to find
Thank you king
Completely forgot about that. I’ll do that right now, check the description in a few minutes!
Ficou muito bom tá top 🔝
in theory, could you take the 99-2000 radio bezel, relocate the climate controls, buy a 99-2000 climate control delete and boom. no vent issue
Yes you could if you wanted a smaller screen. The 99-00 bezel wouldn’t fit the size that I needed.
Did anyone ever figure out what vents work for this bezel?
There is a video floating around of a guy who made it work.
I have two 98 civics And both were converted over to the E K9 climate controls it is super simple you just need the basil and controls And instead of modifying anything just go to the junkyard and pull out an E K9 AC Box And you can remove your AC Box and install this one put your dashboard back in and plug everything in simple plug and play no muss no fuss. This is the absolute truth there ARE other ways Doing it you just a small wire harness from the E K9 ac box And the little actuator that controls the heater valve it boats in easy-peasy And the cable that controls the heater valve comes with IT .it.just bolts in. the AC boxes are identical.
And as far as having to Modifying the bezzle that's absolute bullshit
I never said there weren’t other ways to do it. This is just most simple way to do it. Not many people want to pull their whole dash and swap the AC box just to do a radio. This tutorial is for those people.
For this setup, if you want your stock vents to work with this bezel you DO have to modify your bezel. No need to call bullshit there.
"Just go to the junkyard and pull out an EK9 AC Box" I'll pick up some unicorns while I'm there too..
Just wanted to let you know the radio link isn't a 9" anymore its a 10" got burned so now it doesn't fit flush lol
Thank you 🙏
How did you trim up the cup holder? What did you use?
Totally forgot to mention that. I used a dremel with a cutting disc and then sandpaper to smooth out the rest!
@@OldieProductions thank you and 9 inches right?
@@ejjimenez23 Yes. Make sure it’s the same shape as this one if you want a perfect fit! I’ve linked the head unit in the description.
My 1997 Ek AC Bezel is electronic so can't do it😅
Onde comprar a moldura do arcondicionado?
Is this double din CarPlay compatible?
Yes it is!
Thank you
Can you do an update for the Radio?
What do you mean? Like an update on what I think of the radio?
@@OldieProductions like a review
I have this exact same model of civic! Your dash has much less wear than mine...
This car had a very easy life and the interior is definitely 9/10 condition. I got very lucky.
Nice work! Just curious, would you sell me your stock radio?
I'm a hoarder and keep all of my OEM parts in the event I decide to sell the car, the new owner will have all the original stuff. They might not even care, but me as a buyer, I love it when people keep all the OEM stuff!
@@OldieProductions True that!
Bro can I buy that stock radio unit yo removed lol?
Well can't be too mad
i don't know how this hasn't existed before
but i already did the complete 99-00 black interior swap on my em1 clone
But at least i ain't gotta do it again
That’s the way to go if you’re willing to put in the work!
just letting everyone know, the radio bezel he has linked is NOT the right size it’s a little too small so the screen he has linked sits over the insert that it should go into.
Which one should we get?
Which one should we get?
@@Moonless_YoruJust look what size of bezel you buy, the one linked has 9 inch in the description. And the linked radio has 10.1 inch.
Just swap out a 99-00 radio bezel and poof OEM and double din! They’re interchangeable!
Unfortunately it's not that simple. The 99-00 climate controls are electronic, whereas the 96-98 climate controls are cable driven. If you use the 99-00 bezel, you will have to do a bunch of wiring for the climate controls to work properly.
It doesn’t work like that . The wiring isn’t worth It.