@@ddbbuilds no you only have to get a non m connector you could probably use the old one from your non m subframe it’ll bolt right up to the m subframe only difference is the connector
New subscriber here , i genuinely love how you didn’t put an m3 bumper on a sedan not that’s its ugly it’s just common so this setup is unique , much love 🙏🏼
The speed you pull and drop engines and subframes with is wild lol I’ve been putting off dropping my rear end because last time it was down for like 3 weeks
@@hellrotgarage haha trial by fire my dude, it be like that sometimes man. But you paved the way for a lot of us out here both what to do and what to not do and look out for 😂. My car would not be what it is right now if I didn’t find your channel last year. Keep filming stuff for us 🙏🏻
i had the same problem with the waves and fitment with big duck clubs overs, quality was just terrible. planning on getting a set of musk’s for my new car
Just unbolt the 10MM bolt on the wheel speed sensor off the 330 subframe and swap the whole sensor. Easy and no cutting required. Bolts to the same spot and should be identical
I was the guy who he bought the drivetrain from and from my experience the 5spd and 6spd are fairly similar in the feel at the lower gears. But I never ran boots on either transmission. Having a higher red line would help a little just so you can hold on to the gear for a bit longer after 1st gear. But no matter the gear ratio the tires are gonna loose traction in first gear when you plan on making the numbers Jared plans on making hahaha.
I’m following your bottom mount build for my car but also saw how you got boost creep on that setup, anything you recommend doing differently to not get that?
The surface finish of the clique tuning ones are much poorer than the ones on Hellrot. You can see the entire weave pattern - unless that’s on purpose. And you’re right the fitment is pretty terrible.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I get some motivation every time you release a video my coupe gets slightly more done now im hunting for over fenders 🤣
You guys commenting stuff like this also gives me motivation to keep going❤️
@hellrotgarage we need you to your basically the only person who builds good e46s and does good content to go with it
Without your build I doubt I'd still even be m54 tbh
Why doesn’t this guy have 100k subscribers yet? WAKE UP PEOPLE
Your dry humor always has me dying😭😭keep it up bro
Glad to have good e46 content on RUclips. Following with my own turbo build this winter.
Thank you man!
edits getting better i see u rotty!!
Thanks man, figured I could put some effort into this RUclips thing and it might gain some interest🫣
DAWG THAT WAS THEE MOST FIREE INTRO EVER DOE 🔥 got me all inspired 💯
You the best bro, keeping us e46ers hyped to get down and dirty!
Thanks you❤️
Love watchin you install it exactly how it went when I dropped my m3 subframe in, and yes swapping the connector makes the speedo work
Thanks man
So I have to cut the m3 connector and wire my regular connector onto it?
@@ddbbuilds no you only have to get a non m connector you could probably use the old one from your non m subframe it’ll bolt right up to the m subframe only difference is the connector
The blue e46 is just beautiful
Thanks man❤️
my buddy got some musk overs for his coupe facelift and they came out immaculate fitment is perfect i’m def going with musk in the future
My boy going crazy with the 46s🔥💯
Trying anyways😂
New subscriber here , i genuinely love how you didn’t put an m3 bumper on a sedan not that’s its ugly it’s just common so this setup is unique , much love 🙏🏼
The speed you pull and drop engines and subframes with is wild lol I’ve been putting off dropping my rear end because last time it was down for like 3 weeks
Well unfortunately I’ve had so many failures I’ve gotten good at a lot of stuff🫤😂
@@hellrotgarage haha trial by fire my dude, it be like that sometimes man. But you paved the way for a lot of us out here both what to do and what to not do and look out for 😂. My car would not be what it is right now if I didn’t find your channel last year. Keep filming stuff for us 🙏🏻
i had the same problem with the waves and fitment with big duck clubs overs, quality was just terrible. planning on getting a set of musk’s for my new car
It’s unfortunate.
🔥🔥
Yo please upload
Do u have to cut the body for the over fenders ?😊
great video, nun new
Thanks man
hey man just a question how big is the turbo? and with your setup how much horsepower you pushing?
did you manage to keep ac on the bottom mount build??
Yeah but I need to fix a ac line
Wait.. what peak boost are you at now??
What’s a good first welder to buy when you want to do the e46 subframe mount fix?
Mines a harbor freight titanium 240v and I love it now that its on gas. Got it about 5 years ago
Just unbolt the 10MM bolt on the wheel speed sensor off the 330 subframe and swap the whole sensor. Easy and no cutting required. Bolts to the same spot and should be identical
Thanks man
Also curious how that m3 diff ratio will be with boost. Lower gears are prolly gonna be useless.
Keep up the awesome content
Thanks man, yeahhhh its just a starting point to hold power and have a LSD. I will have the m3 6 speed so it should help some.
@@hellrotgaragegear ratio on the non M and M transmissions are nearly identical. Only the overdrive gear is different
I was the guy who he bought the drivetrain from and from my experience the 5spd and 6spd are fairly similar in the feel at the lower gears. But I never ran boots on either transmission. Having a higher red line would help a little just so you can hold on to the gear for a bit longer after 1st gear. But no matter the gear ratio the tires are gonna loose traction in first gear when you plan on making the numbers Jared plans on making hahaha.
I’m following your bottom mount build for my car but also saw how you got boost creep on that setup, anything you recommend doing differently to not get that?
Thats a good video idea. I should probably explain that
@@hellrotgarage pls do don’t want to do same and have the same issues haha
Zf5 6 bolt driveshaft bolt right up to m3 diff?
Uh maybe. But I’m doing the m3 6 speed and shaft with this.
The surface finish of the clique tuning ones are much poorer than the ones on Hellrot. You can see the entire weave pattern - unless that’s on purpose. And you’re right the fitment is pretty terrible.
Hate to diss on a company like that, but dang. I regret buying those cliq overs.
and just like that, this build has now been ruined by cliq tuning install
The blue car? Lol. I mean it can be fixed with Musk overs but I kinda need to save some money😂
But hey. At least im doing a honest review and showing the bad parts of my cars 🤷🏻♂️
hellrot dog
Thumbs up for dog
Two hellrot dogs. Dont forget about the natural brown dawg.
Yooooo