Reasons your Instant Pot WON'T Come to Pressure--And how to fix it!
HTML-код
- Опубликовано: 10 июл 2020
- #instantpot #instantpottips #pressurecooking
Troubleshooting all the various reasons an electric pressure cooker or Instant Pot may not seal properly and how to fix the issue so you can get back to pressure cooking with success.
Subscribe for More Instant Pot Recipes: bit.ly/2p7w37u
Free Instant Pot Tips: bit.ly/2NWeEbK 
Хобби
Thanks. I am a new to cooking and had the same exact issue today. In fact I was cooking beans and ended up throwing them away. I probably was not waiting long enough. You have a great little video here and make it easy to understand.
Glad I could help!
Thank you so much! I just checked and my sealing ring was not secured. Now it seems to be working. I so appreciate your video :)
Glad it helped!
Hi there. Not a sealing issue but thought i would share a tip to speed up time for instant pot to come up to pressure. Most of meals i make (thanks to your channel) I use the saute function so after scraping the pot to free those flavourful crusties I leave it on saute (high setting) put the lid on then switch to pressure cook. Comes up to pressure quickly for me anyway. Maybe this has been suggested already but if not I hope it helps:)
The issue with that is that most recipes are calculated using the time it takes to come to pressure with using cold liquid. I caution against using warm liquid or sautéing first unless a recipe states to do so. It can result in undercooked items
You're right. Most recipes are counting on cold water (and in the recommended amount) to arrive at the specified cooking time. @@AMindFullMom
You saved me!! I was starting and restarting my soup having an anxiety attack cuz I couldn’t figure out why the timer wouldn’t start. I was cooking a whole pot of soup and turns out I just wasn’t waiting long enough!!! Thank you thank you thank you!!!
I am so glad you found this video and dinner was a success! Happy New Year!
Hey sorry to bug. If my valve isn't release steam but the cook time started. The cap hasn't come up at all.
Clear and concise explanations. Thank you!
Glad it was helpful!
Thank you SO much for this! You fixed my "problem" within 1 min of this video 🤦♀️. So glad you explained things for us newbies. You're awesome!!! 😊❤👍
You are so welcome!
How did she solve it within 1 minute when she hadn't even given any tips by then?
@@heidis8713
:50 I realized I hadn't waited long enough. Once I realized what she said was true, I waited and bam! It was ME, I was the issue. I was thinking my Indstapot was broken. So, that's what it was for me, instantly, under 1 min. Hope that makes sense 🤷♀️😁🫶
All great tips, thanks for your video.....
Glad it was helpful Pete :)
I found this a very informative video! It answered my questions perfectly! Nice and succinct with good info. Thank you!
Glad it was helpful!
Bonjour et bravo c'est très intéressant
THANK YOUUUUUU!!!! I played around with my ring put it back in and it’s finally pressurizing!!!! Your video saved meeee!
Yay! So happy this video helped.
This comment saved me watching the video 😂
Yep- I checked the sealing ring and made sure it was sealed. Problem solved. Thanks!
You bet!
Excellent video, thanks so much. The editing was great.
Much appreciated!
Hi, I have the same pot bought here in Australia under HomeMaker Brand. I recognised the 2 lid knobs exactly the same. I think your advice with the Twist Vent Knob is right but you didn't mention the other pressure push valve beside it. This push valve (red on mine) has no spring to keep it closed so ex-factory my pot can NEVER build up any pressure due to this valve that stays open by gravity. All it does is shoot out steam to make it look like pressure. Even just one atmosphere pressure 14.4psi is enough to scald or 2nd degree burn your arm. Car radiator caps are 14psi and many drivers know how these can blow steam. Proper steam cooking is just too dangerous for these thin aluminium pots so they are almost a scam. Still I applaud your warning and help.
I will have to look into this model, but that may be hard here in the US . What you are describing sounds unsafe. Sorry I can not be of more help, but if I figure something out, I will let you know.
Thanks for the help
No problem
Had this issue last night. Thanks for the vid.
Glad it helped
A Mind Full Mom this was just the information I needed. Thank you!!
You are so welcome!
Thank you so much for the gasket lid in fridge .. you saved me!
Glad I could help!
waiting! that's what i needed to do. thank you
You're welcome!
Thank you for this video! I forgot to put the sealing ring in! It never would have occurred to me that I forgot this step. 😭😭😅🤣
Glad it helped! And happy it was an EASY fix!
THANK YOU 😊🙏🏾
You are so welcome
Thanks!
You are welcome!
The freezer trick worked! Yaya thanks!
You're welcome!
Thank you 🙏🏽
I hope this helped!
Do you have any tips for an instant pot max? Mine is brand new out of the box and won’t get past 97 F with the water test or canning tests. I’ve checked everything multiple times. Unfortunately the valve on the Max is automated so there’s not much you can do besides install it correctly. My silicone ring is in correctly. I’m at a loss here. Of course I’d pick the day I had a deadline to test it.
I would suggest calling customer service today. It should certainly reach more than 97 degrees and that may be an issue with the machine itself. Good luck!
TY!!!!
You bet!
Omg thank you.
Thank you sooooooo much!!!! I also subscribe to your blog. I enjoy your recipes and RUclips videos!!!
Awesome! Thank you!
Thanks AMFM ! I am a mechanic and I was stumped. lol
HA! We can't be experts at everything! Glad this helped.
You’re my hero. It was my sealing ring
YAY! Thrilled to help!
3:52 This video helped solve my problem. Thank you!
Awesome! So happy to hear that!
Thanks!!!!! the plastic seal was not secured properly (now its working again)
So happy this helped!
You're awesome!!! 😊❤👍
Thank you so much!
Main problem I've ever encountered is when I've prepared the food, put it in the Instant Pot and turned it on. A few minutes later hear the error message- oops, forgot to put water in it. LOL Thanks for the video!
Sometimes our mistakes our help us learn the most Jim ;)
I got pressure king pro 12 in 1 . I put plenty water in to cover line it keeps boiling dry .the lid isn’t sealing. Tidy
Be sure to check your seal on your lid. If that is not the case, I would contact pressure king's customer service. You may have a faulty model.
What a pain in the 🥾y this thing is. Thanks for the tips.
Once you get over the learning curve, it can be great!
I went 2 years trashing youtube instant pot recipes not knowing my Instant Pot duo wasn't working properly from the time I bought it. Everything was undercooked. New gaskets, cleaned the valves and vent, nothing worked. Finally discarded it and bought a new one. Also a Duo but with a little different vent controls. Everything works great now.
I am thrilled to hear you are now enjoying your Instant Pot. Sounds like you just had a lemon!
I came to this video to fix my instant pot, and low and behold it now appears to be working. Just thinking about watching this fixed my instant pot like a miracle.
LOL! Hey, glad it worked!
All she had to say was you need to saute FIRST. to preheat the pressure cooker. That worked for me. Thanks.
What if your float valve reaches the top and it beeps but goes to end? I was making risotto tonight I have never seen this before.
I canceled it and hit pressure again. And waited and it seemed to switch to the countdown correctly this time instead of going right to end.
Wow--that is an odd one! Could it be you accidently set the timing to 0--which would cause it to beep and end at the same time? I am glad it worked the second time.
Hi, mine is stuck on preheat even on the water test, and the float valve is up. Any ideas? The vent knob is closed too
I would ensure you used enough liquid and your seal was not broken. Let me know if you checked those thigs.
Thank you. Mine was the ring. I put it in the freezer, and bam!
So glad these tips helped. A warm ring will do it😉
There's a three-prong metal wire on the inside lid. In my situation it caught on the device to pressurize the pressure pot. Solution, depressurize it, take off the lid and adjust the inside wire 😊
Now that's the sealing ring is what I'm missing 😅 been cooking for an hour I though I bought a defective one. Made me nervous lol.
I get it! So glad you figured this out!
I love my pressure cookerXL BUT TONIGHT UT WOULD BUILD PRESSUSURE I FOUND TE STEAM CIMING FRIM THE HANDLE PART OF THE LID . LOOKS LIKE EITHER A-SPECIAL SCREW OR SOMETHING IS MISSING UNDER THE SEAL . CAN SOMEONE TELL ME IF I CAM FIX IT ?
It actually sounds more likely that your seal was not inserted correctly or has a tear.Try taking off the seal and placing it back on tightly to see if that helps.
Mine is Hoffman's brand. Started using it first time and pressure not adjusting to high it's on medium and am cooking beans also the pressure valve not floating up so what do i do?
Hi there! I can't find the manual for a Hoffman pressure cooker or any model from that brand online. I wish I could help more, but I am not familiar with this brand at all. I would recommend calling the customer service number on the manual that came with your unit.
Thanks to you my Insta Pot works again. HOOORAY!!!!!!
Happy to help! I am so glad this video saved the day ;)
Does anyone know if you're supposed to push the valve down at the beginning? Mine stays in the same place and I don't see this addressed in the instructions.
Can you tell me the model you have? The valve should float up as pressure is reached and then float back down as pressure releases.
I have a duo plus and iv checked all thor's over and over and even kept buying different brand rings off Amazon with great ratings and everything and I still can't figure out how to get my instant pot to reach pressure. For the past maybe 10 times now out of 15 my food cooked all the way and even over cooked bc the time won't start but it was cooking my food the whole time. The steam comes from everywhere on the top. The little notch I'd up all the way saying their is pressure everytime. If I catch it in time I just keep taking it off and on (the lid) and hope it works ...by then food is always gross after cooking
Hi Makayla. It sounds like you have really troubleshooted well. I would call Instant Pot Customer Service, they are great and it sounds like you may have a bad model.
I have my instapot set to slow cook. But it stays on preheating! For 1/2 hour already. Any ideas?
The slow cooker function on the Instant Pot does not work well at all! Here is my guide for using it: amindfullmom.com/pressure-cooker-as-a-slow-cooker/ As for heating, you can turn to saute briefly to speed up the process.
Mine will never work I named her Alexa now she’s always venting her problems to me
LOL!
I tried to cook white rice and followed your rice guide to the t but it never pressurizes and eventually just gives me the food burn notice. Ive cleaned it and even went as far as biying a new sealing ring but no luck. I'm about to throw my instant pot away if I cant figure out why it wont come to pressure
Hey there! I am so sorry you are having issues. Is the vent knob closed? What size model do you have? If an 8-quart you need to at least 1.5 cups of liquid.
Hi AMFM, my pressure cooker just won't start, all other button works but the pressure cook.
So frustrating! Can I ask what model you have and what happens when you hit the pressure cook button? That way I can further troubleshoot for you.
I changed my seal.. steam is leaking out the sides.. only work if I buy weight on the lid. ??
Hmm, that sounds like the seal isn't a proper fit. I would see if you can replace with the exact seal designed for your model. Sorry!
What to do if I can't take the lid off.. and valve is up and a lot of the steam cam out with porridge.. and time is off yet I can't open the lid
Hi Grace! It can take 10-15 minutes for the valve to release after the cook time is up. Once it does, you should be able to open the lid. You can also opt to do a quick-release of pressure. Here is my video explaining how to do that: ruclips.net/video/qwnhnrZ4r6o/видео.html I hope that helps.
@@AMindFullMomit had been 2hrs it had been done and stated pressure was low but dint let me open the lid.. end up putting to cook again and when it was done again this time it let me open it.. yes my food was burn but I got to open it
Hi there, mine the pressure is coming out how do I fix it
Make sure the knob on the lid is pointed towards sealed :)
Instant pot pro right out of the box. Keeps steaming like crazy out of the top while preheating. Yes, the lid is sealed, the valve is closed, there’s enough liquid, the float valve popped up. The steam kinda slows for a minute and ramps back up again. It’s been 30+ mins…is this normal? And why is so much steam escaping if we’re trying to build pressure?
This is not normal, but let me know what you are cooking and I can confirm that. Sometimes if you inner pot is overfull, it will take a really, really long time to come to pressure.
@@AMindFullMom I was cooking Ropa Vieja. My pot was maybe 1/3 of the way full. I tried adding a little bit extra liquid and shortening the pressure cook time to 5 mins but it just kept steaming out of the vent. Tried it 3x before I tried slow cooking. The pro model doesn’t have the normal floppy knob. It has a stainless steel vent that doesn’t budge. The “seal/vent” button is is next to that and is set up like a light switch. The red float valve is on top of that. I’m probably going to return and get an 8 qt duo.
I would double check the inner ring and then decide if it is defective @@jjj1981jj
Hi I had got finished cooking chicken, let it the pressure it was done then hit cancel. We ate dinner I looked obverse and it was flashing C-1. Any ideas what this could be? Ive seen where it says something about faulty sensor and to contact customer service but its out of warranty. Thank you😊
Oh no! It sounds like maybe food or water spilled into actual instant pot, which can damage the sensors. A C1 error indicates that the central temperature sensor cannot be detected. My best recommendation is to let it dry out, check plug connection and try again.
@@AMindFullMom ok thank you. I plugged it in and ot doesn't say it anymore but I'd hate for it to do it I the middle.of cooking something. I'll keep an eye on it. Thank yoh😊
@@thesnoozebutton2568 I hope it doesn't happen again!
@@AMindFullMom I know Me too😑
can i cook with no pressure with this ? like... i don't want pressure cooking all the time, sometimes i just want to boil a normal soup, the normal way. no pressure needed. can i do that ?
You can use the saute button to simmer or saute. Technically, you can use that saute button to boil, but it is easier on the stove to control.
@@AMindFullMom there is this stew, where i have to add ingredients gradually, as it cooks. on a normal multicooker, on the 1 hour stew program, i have to open it every 20 min to add stuff.
could i do that with the instant pot ? does it have a function of just cooking normally without pressure ? in order for me to open the lid as it boils ?
@@itsMe_TheHerpes No, unfortunately, you would need to set the cook time, let the pressure release, add the ingredients, and then set cook time again.
@@AMindFullMom i see
@@AMindFullMom my pot stays on low but cooks still ,but not as quick
Mine starts the countdown, but is not pressurized
What model do you have? And have you ensured your sealing ring is on the lid?
Same, when it's finished with the countdown, it just takes 3-5 seconds to release all pressure with is odd cause it usually takes 30 up to more than a min. before the pin goes down.
Should the base/side of the instantpot start to feel warm to the touch at some point? Should it feel warm at 20mins ? 30mins? 45 mins? It's been 25 mins and a 'noPr' message has just appeared. (Brand new plastic ring too)
Hi! That means no pressure has been reached. What are you trying to cook--that will help me further troubleshoot.
@@AMindFullMom 2 turkey legs in a soup. The 6qt instant pot is half full. I've cleaned both the pressure valve and 'vent/sealing' twist cap. The plastic seal ring is brand new. After about 25 mins or so 'noPr' appears. The side/bottom of the pot is still cold at that point. I just now completely emptied the pot, put 3 cups of water in it and put it on 'saute' (without the lid) to see if the water warmed up. After 10 mins still cold. So the heating element isn't working it seems. The instant pot is out of warranty (3 yrs old) so I guess I need to trash it?
@@MM-ow2md Oh no!! It does sound like the heating element went bad. That just stinks!
The pressure in my instapot releases suddenly,with a noise, causing great concern. Does an instapot burst like ordinary pressure cooker
Hi there! The name brand should not burst, as it has protective measures to prevent against that. However, that does not sound normal if it releases all the pressure with a loud noise. I would maybe suggest calling the manufacturer to be safe. If they think everything is fine, I would be sure your vent knob is pointed towards sealed and your sealing ring is good and you have a full cup of liquid in your Instant Pot.
You just save my marriage!!! Thank you!!!! ❤️🙏
LOL! Glad I could help!
My dumbass forgot to put the sealant ring lol… it kept saying food burn and the steam was making water all over the place lol!! Thanks so much for this 😂
We have ALL been there! Glad this helped!
Why is your ring ‘RED’.. I have the exact pot with clear ring. Is that a replacement ring that’s better? TIA🤞💕😊 & Happy Thanksgiving 🦃🍽
I have colored replacement rings. I bought them so I can remember which one I use for savory and which one I use for yogurt. They don't work better per say.
Mine is brand new, it either won’t do
It or takes for ever like over 20 minutes. The seal and everything is correct.
And I don’t want soup so I don’t want to “put more liquid”.
Are you using at least 1 cup of liquid? That is needed. And what are you trying to cook? Some things take 20 minutes to come to pressure.
I am having the same problem. When I pressure cook and set the time for let's say 10 mins. It stays ON and the timer doesn't start. The valve doesn't go up. And the food is burnt after 10 mins. I have tried with alot of water too. It just dries up. With less water or with more it's just the same. The valve moves side by side but doesn't go up and timer doest start.
I would try to replace your seal on the lid to see if that helps!
I just bought the instant pot its brand new. I think I need to talk to them.
@@mahanaveed7576 They do have great customer service! I hope they can help you figure it out!
I have issues when I cook those meals that only needs 5 minutes. Is it because it takes more than that time to pressurize?
I am not sure I understand the question. Are you asking why recipes that say they take 5 minutes require more time due to the time it takes to reach pressure? Or that you are finding your recipes require longer to cook than the 5 minutes under pressure? Unfortunately a lot of recipes don't include the time it takes to come to pressure and pressure to release in the total time, which can make planning hard. I try to add that in for you on my recipe cards.
What does it mean when it displays rap?
Can I ask what model you have?
Hi my problem is my instant pot is not saute when I'm trying to heat the pot
Hey there! It can take a bit for the saute function to warm up. Have you given it a bit of time?
This is our second unit, and it was the same issue with both models. There is a design issue with the Float Valve in the Instant Pot. Not one of my pressure cookers, I have 5 of various sizes have ever had the problem. I have as I said, been using a pressure cooker since my mother taught me after the war (WWII) I have owned several different makes of pressure cookers, the Pressure Cookers have a spring on the Float valve to hold the seal on the lid. If the Instant Pot was to change there design it would solve the issue.
I would certainly share the concern with the company. MAYBE they would listen (hopefully!)
@daveclarke8527 My instantpot heat element failed so need to buy a brand new pressure cooker. Which specific brand/model would you recommend ?
My float valve doesn't float up and steam comes from the float valve
It sounds like you it may be in the venting position. Could that be the case?
So, I got an inatapot for mom's day and cooking a small pork loin. I searched for this because I had a bunch of steam coming out the vent for several minutes. But after about 18 min it suddenly stopped and a cpl sec later time set and I'm in business. We'll see how it turns out.
I hope you enjoy! I would be sure the vent knob is fully pointed to the sealed button or the lid was locked.
Mine is the valve .. comes out.. think something is missing.
Check to make sure that it is pointed to "sealing" It will let a bit of steam out when it is coming to pressure but should stop. And the valve does pop in and out--that is normal :)
No videos on the Ninja Foodi XL .. I keep getting WATR message and tried all steps online.
That message indicates you need more water or thin liquid in order for pressure to be reached and maintained. Be sure to use a full 1 cup if it is a 6 quart model and 1.5 cups if an 8 quart model. Keep in mind that any thick sauce (like tomato, ketchup, etc does NOT count toward the liquid)
I came here to find this! Thank you!
Wtf I am so sad today I got plenty of of liquid about a 2 inches far from marker. It keeps saying add water. I added water and it keeps on saying add water later. I checked the ring and sealed the lid tight
Hey there! That is frustrating. I would unplug your machine, dry your inner pot well and make sure the inside is dry as well. Place your inner pot back in your machine and add just 2 cups of water and try to bring that to pressure.
45 minutes is way too long. I had a very similar problem. There is inner rubber seal must be aligned properly. The seal is loose or not aligned properly Pot will probably never get to pressure until all the water is gone and the burn sign comes on.
I was trying to cook frozen chicken breast with mushroom soup. Is this too thick to come to pressure with?
Hey there! Yes, you would want to put 1 cup of broth or water in the bottom of your inner pot, followed by chicken. Dollop the soup over the chicken and then cook. I personally don't use condensed soups, but that should work.
@@AMindFullMom thank you! It was a homemade gf condensed soup. I'm thankful my insta pot isn't broken then.
@@bethanyhall1524 Not at all! Just too thick to use alone!
I'm confused. Should be in Sealing or not?
The knob always should be sealed when cooking under pressure.
what about if it says water when it’s full of water
What model do you have? I am not familiar with an error code "water"
What if timer does not come on,but everything else works?
That often means that your seal is not fully on or ripped. Be sure to check it closely. I hope that helps.
Mine starts the cook time but the float valve doesn't pop up. When I press the lid down it does but once I let go after like 30 seconds, it falls back down. The inner ring is always perfectly clean. There is alway enough liquid.
It sound like you may need a new seal around the float valve. First try cleaning really well and then if needed, here are new float valves (amazon link) amzn.to/4bPMnM5
@@AMindFullMom I thought that too yet it looks fine, but might order a few of those seals just to be sure. There was some calcium buildup on the float valve and in where it sits in the lid but I cleaned most of that out and even with it in there the valve freely moved so it never really stopped it from popping up. I'm kind of thinking now that the sealing ring might not be sealing, so I ordered a few replacement seals. Hard to believe it would need replacing after only 4 years of non daily use. The company Instant Pot was not helpful at all because mine is out of warranty and all they suggested was that I needed to buy a new one, which is completely wasteful.
@@Resist4 I agree! NO need to buy a new one. But I would try new sealing rings as well. I replace mine yearly (but use it a ton!!)
@@AMindFullMom looks like Instant Pot recommends replacing the sealing ring anywhere from 6 to 18 months, depending on use. I also have a 6qt Instant Pot and it had the issue. I know they need to make a profit but you’d think they would design seals that lasted much longer. Because back in the day the pressure cookers didn’t use silicone seals.
UPDATE: My new inner sealing ring arrived today and I tried it out. The float valve popped up and stayed during the cooking process. Woo Hoo!
My instant pot is pretty new but the little "sealing" and "venting" button is not working properly. The air kept coming up once I turned the instant pot on. What should I do?
Hi Florence! What model do you have? Be sure that the sealing ring on the lid is secure without rips. It is normal for a bit of air to come out of the knob as it is reaching pressure, but it should stop and seal. Let me know which model so I can try to further help.
I’m having the same exact issue. Everything is clean. I’ve used it once and now it won’t go past pre heating. Any suggestions?
It doesn’t make sense to me that having the pot very full would cause it to take longer to pressurize. More liquid = less air = faster to pressurize.
To come to pressure, the instant pot heats the liquid. The more liquid, the longer it takes to heat. It isn't heating the air, just the liquid. I hope that makes sense.
@@AMindFullMom Ah yeah, I see. I use a water boiler first to make sure that the instant pot doesn't take too long to get going.
@@Robfenix Just an FYI, I don't recommend that. It will change the time it takes to come to pressure which will change the best cooking time.
HELLO i just want to say Thank you very much my instant pot just stopped coming up to pressure and I took the seal out and cleaned it good and it is working now I was going to buy a new one I use it all the time God bless you and all of your family.
Wonderful! Happy to help! And blessings to you as well!
E4
Hi Shawni! That error code will vary based on model. It typically means that there is an electrical issues, like the fuse is blown out.
@@AMindFullMom thanks
Right when you said be a little patient it came to pressure… lol
LOL! Works like a charm!
Is cancel button sane is STOP button ??
Yes 😊
I went through the video convinced I will watch it till the end and come to the conclusion that the pot is the problem not me.....a few minutes in ...I was like what sealing ring?....is there a ....ohhhh...I AM the problem
Haha! It takes a learning curve and I am so happy you figured out the issue.
When I plug mine in, all the button lights flash. Is this normal?
Hmm. I have never seen or heard of that problem. What model is it?
@@AMindFullMom Thanks for the response. It’s a duo plus. I think I will reach out to their technical support team to see if they can help troubleshoot the issue
@@wesdaaawg Keep me posted. This is not normal
@@AMindFullMom will do!
Thanks for not letting pressure cooker blow up on.me
LOL! You bet!
I think mine was too much liquid
It will take QUITE a bit longer to come to pressure if too much liquid.
my vent valve wont sit properly on it after cleaning. Today noticed a small wire (butternut squash shaped) on the lid where the vent valve goes on. But have no idea how it supposed to be placed… Anyone???
What model do you have? I have several models and none of them have a wire in that section.
I’ve burned too many meals so I’m done with instant pot and checking other pressure cookers
It could be the recipes you have been using. I recommend always using thin liquid (tomato based products don't count) and be sure the thin liquid is on the bottom of the inner pot
I heat my water first.
That will significantly change the cooking time, so I don't recommend doing that at all. While your IP may come to pressure faster, what's inside won't cook properly in many instances.
Very helpful - but this 3:51min long video could be a 1 min long video. :)
I've tried everything. It won't seal at all
What model do you have? And let me know the exact issue. Is it not turning on? Is it never reaching pressure? Is it just hard to get into place?
@@AMindFullMom I've used it many times. But the last couple times I did soup and it would make the close sound. And steam would leek out of the top and sides of the lid. I know to check the rubber ring to make sure it's secured. The lid would not lock. The timer will start as if its locked and up to pressure. I tried 3 times yesterday with no success. After the 3rd time I just stopped because by that time the soup was cooked regardless. The time before that it worked only after the 3rd try. My girlfriend will be doing rice today so we will see then. May just end up buying a new one.
@@sonavagun9283 It sounds like the seal is bad. I would suggest replacing that before buying a new ring.
@@sonavagun9283 I would try replacing the seal. It can stretch or have tiny tears in it and can stop working--even if it looks fine.
I guess thats the next step. Thanks you
Not helpful for me
If you let me know your issue, I am happy to troubleshoot for you.
doesnt come to pressure and the count down starts.
That sounds like the seal is bad. Have you tried replacing it?
ok, i figured it out. No "burn" notice on my pot. But the food had created a crust on the bottom on the pot that I could not see. So I think this was the issue. Fortunately I was able to transfer it to a pot and low simmer my stew and meat on the stove top and it turned out fine. Thank you for responding though!!! I was in a panic. LOL! @@AMindFullMom
I thought I would hear the problem I am having....Nope!
Let me know what is going on. Happy to try to help.
It's an instapot, not instant pot.
Um, actually the brand name is "Instant Pot"