For those who want a simple thermostat (just -/+, no programming) here is what you do: Hold the "Menu" and "+" buttons together for about 5 seconds. A hidden menu will appear called "ISU". "Select" and "Back" control the top number, -/+ control the bottom number. You want to set it so that it reads 120 over 0. Press "Home" to save. Your T4 is now the simple version. You can select Cool/Heat, Fan On/Off, and -/+ only. No programming. To set it back, follow the steps to get to the ISU menu, and set it to 120 over 2, and you'll have a programmable thermostat again.
I finally figured it out. Thanks to this video. If you use the + button to turn up heat it won't stay permanently unless you hit the hold button. No wonder I was cold again in the morning. Got it.
Oh thank you very much, my Thermostat stopped working because tthe battery was out and we stayed in the cold for a day before I found this video, God bless you dude✊❤
I am more confused than ever. I just want to turn on the heat and shut it off when I feel the house is warm enough. I could care less about the date, mode, and all the other buttons.
Mine just went crazy and I can't figure it out for anything. It's 11 at night, I'm going to bed and praying it won't freeze me to death. I'm replacing this junk asap, like TOMORROW.
To anyone who wants to change the minimum temperature set point!!! Your Honeywell T4 Pro series has a total of 5 buttons. A + and - button and 3 gray buttons in between. 1. Press the + button and the middle gray button at the same time and hold. You will see ISU come up. Before you hit select this is VERY important!!! There is a series of numbers that will appear. Consider them Codes. They all mean something. For example 120 might mean what type of heating do you have. Then the number underneath it is the setting selection. So DO NOT CHANGE THE NUMBER THAT APPEARS UNDER THE CODE. To change the minimum temperature you want to look for the code 430!! To do this continuously click select *making sure you do not change the number underneath the code!!* you will completely mess up your thermostat if you do so go slow! Once you’ve reached the number 430 you want to hit the Minus number to your preferred temperature minimum and then continue clicking select until the end. Once finished it will tell you click home and it well save! You’re welcome 😇
Ok so my dad has been messing with this how do I fix it it’s so hot I’m sweating in my own home, how should I make it cooler but not super cold my dads saying that if you put it in cool it will not change anything how do I fix this?!?!?
THANK YOU!!! One of these is installed in my apartment. It's hot outside here and it was still on heat. Apparently...we don't have air conditioning but I was able to exit the heat without having to call maintenance.
@@joanagonzales4491 the second button on the left...click it 3x. It says heat, cool, off. Since this post... maintenance has fixed the air...it was frozen. But still...the panel info is very useful.
I hate this thing. I don't feel that the "auto" feature is truly auto. Mine never turns off unless I manually turn it off. Once it gets to the desired temperature, it starts blowing cold air instead of just turning off. The customer service number & my HVAC guy have been useless. Did I say that I hate this thing????😫😫😫
Roy thanks for the explanation, on the setup. They as all new items installed did not supply a operating manual. Cool On was flashing and I had to experiment to figure it out.
We have this in our home. It's a new construction. But we get little heat downstairs and gets very hot upstairs (68degrees) how can we fix so we can get heat downstairs too?
How do you turn on AC so that it's not just blowing room temp air? We recently had the thermostat replaced due to heater no longer working and now, I'm trying to figure out how to get the AC unit outside bedroom window to click on at the same time I'm programming the thermostat to the AC option. Does anyone know what I need to do?? Thanks!
I am having the same issue. Sometimes if u live in apartments they have them set where you cant turn them any lower than 70 and I liked mine on 69 it makes a difference in my house for some reason
Does this thermostat go above 78° because my house is still cool when I have it locked at 78 once it cut off it instantly cools back down I stay right off the lake of lake Erie I can look off my balcony and see the lake therefore the wind is blowing extra hard around this time and it's making the inside of my home cold with this new thermostat I can't get it to go above 78 My old one will go all the way to 90 is there a fix
Helpful video but I hate this thermostat so much. The furnace installer picked it. I just want to be able to adjust the heat or a/c as needed. Instead, I adjust the temperature, looks right but nothing happens.
GUYS REALLY! I JUST WANT 72 YEAR AROUND🤬 being a Registered Nurse, very few people would understand Metabolic Acidosis....i don't get this wicked thermostat! Just keep it simple! I want the old thermostat with the dial🥺
I set the thermostat to 60°. It is showing that it's 86° currently. It's been stuck on that same number and the temperature is getting hot outside and it's getting even hotter inside. My mom doesn't know what to do so I'm asking for help. It's almost 90°. Also, is there a way I can reset my password to a different one?
Just got this thermostat. What is best way to set furnace to off for vacation for a few weeks? Is it better to to press mode to “off” or permanent hold on programmed settings?
There is no option to hold. I’m housesitting and it 85 in here. Going crazy trying to activate this thing. Nothing happens no matter what buttons I press
Why is my number 29.0. I was trying to look at someone teaching to turn off the cool on flashing button and it went from 82 degrees to 29.0. I held down the fan and plus sign and it took me to this number. Please help. Thank you so much
I just had one of these nightmares installed yesterday. it was reading 75 degrees right out of the box, which came from the truck outside. it was actually about 65 degrees in here at the time. it now reads 83 when it is in fact about ten degrees cooler. what the hell is up with this pos. I was better off with the old mercury switch thermostat. this thing is just a piece of shit. what a joke this so called technology is. just plain garbage
1 Press Menu, and then press + until it shows ALRT. 2 Press Select to display which alert(s) are present. 3 The word SNZE (SNOOZE) appears. 4 Press Select again to snooze the reminder for 7 days. 5 To clear the alert, press Select, and then to go to CLER (Clear). 6 Press Select to clear the reminder.
Appreciate it bro it was cold in my house and I couldn't unlock it I raised up the heat to 80 cause it was cold I checked an hour later and it colder than it was b4 idk y
Installed this stat & all works well except when fan is set to the on mode the A/C will not cut off when desired temp is reached, keeps running but works great in the fan auto, whats wrong ?
Thats how it should be working when its on "On position" it will stay on no matter what , but if u put it on "auto" it will shutoff at the design temperature
Two days ago my old died! While I was work my sister told me that the maintenance finally show up and replace a new one when I got home! The new t4 pro doesn't give a cooling air and I'm very disappointed! I have trouble sleeping while sweating! My dad wanted me to call again to see what's up! This is a struggle!
I can't figure out how to make it cooler I have the set temp at 68 and the room temp is 81 ... I'm burning, I've been trying to get it to work for 3 days now, I hate this stupid thermostat /;
Just moved into a new home. I have this thermostat. The unit is new. It doesn't go below 79. Its doesn't get cold at all. And the fan won't turn the hell off. I'm going to reset it and see what it does. If that doesn't work. I have a year warranty on anything on the house. So I'll either have them get a different thermostat or fix it. I don't like it.
My thermostat works opposite like if i turn on cool it send hot air if i put it on heat doesnt do anything unless i turn on fan can u help or recommend a video
Omg thank you!!!! This is the MOST complicated thermostat ever!!!! At least to someone that’s no HVAC cert.....
For those who want a simple thermostat (just -/+, no programming) here is what you do: Hold the "Menu" and "+" buttons together for about 5 seconds. A hidden menu will appear called "ISU". "Select" and "Back" control the top number, -/+ control the bottom number. You want to set it so that it reads 120 over 0. Press "Home" to save. Your T4 is now the simple version. You can select Cool/Heat, Fan On/Off, and -/+ only. No programming. To set it back, follow the steps to get to the ISU menu, and set it to 120 over 2, and you'll have a programmable thermostat again.
Bless you
You saved me hundreds of dollars in electricity fees, and hundreds of hours in frustration 😍
stormchasecom so I did this and all I see now is heat and off did I do something wrong
Juan Hilliard same here I don’t have an option for cool???
THANK YOU
I miss my old thermostat.
George Alexander me too.....and I’m of the younger generation. We can typically figure all electronics out but not this one!
I finally figured it out. Thanks to this video. If you use the + button to turn up heat it won't stay permanently unless you hit the hold button. No wonder I was cold again in the morning. Got it.
.
Oh thank you very much, my Thermostat stopped working because tthe battery was out and we stayed in the cold for a day before I found this video, God bless you dude✊❤
I am more confused than ever. I just want to turn on the heat and shut it off when I feel the house is warm enough. I could care less about the date, mode, and all the other buttons.
- or + ;)
Elpio, I feel the same way. What happened to simple ON/OFF🤷🏽♀️
@@ItsMyLifeDaralynn I have no idea why this kind of thing needs to be so complex, if this is what smart homes are like, I want nothing to do with them
@@duanescot I hear you!
This new one is hard.I want my old one back.
Straight up this is a horrible thermostat. Replacing mine soon
Their good if you know how to operate it.
Mine just went crazy and I can't figure it out for anything. It's 11 at night, I'm going to bed and praying it won't freeze me to death. I'm replacing this junk asap, like TOMORROW.
THANK YOU!!! You gave me more exact information than HONEYWELL did! I cannot say THANK YOU enough!!!
it is ridiculous we have to watch freaking youtube to turn our heat on ... GAWD
Jo Jo bro fucking yes this damn thing doesnt turn on im out here feeezing
FORRREEEEEEAL ITS 2AM I CANT THE MF HEAT ON!!!!!!!!!
@@shordymac9381 did you figure it out... mine had a code ... i guess the default... it was 1234
You can say that again. I'm over here freezing. All because I didn't hold it.
@@shordymac9381 mmmmmmnmmmm0
Ugh, I hate this one. Just moved into my new house and it’s such a pain. I wish I had the older ones. So much easier to program. These are a mess
I never knew you had to change them once a year, it's been like 5 years since i changed it last.
How do you get the thermostat lighting to turn on. I have to use a flashlight to read the temperature inside the casing
Great video, simple and clear. Thank you!!!!!
To anyone who wants to change the minimum temperature set point!!!
Your Honeywell T4 Pro series has a total of 5 buttons. A + and - button and 3 gray buttons in between.
1. Press the + button and the middle gray button at the same time and hold.
You will see ISU come up. Before you hit select this is VERY important!!!
There is a series of numbers that will appear. Consider them Codes. They all mean something. For example 120 might mean what type of heating do you have. Then the number underneath it is the setting selection. So DO NOT CHANGE THE NUMBER THAT APPEARS UNDER THE CODE.
To change the minimum temperature you want to look for the code 430!! To do this continuously click select *making sure you do not change the number underneath the code!!*
you will completely mess up your thermostat if you do so go slow!
Once you’ve reached the number 430 you want to hit the Minus number to your preferred temperature minimum and then continue clicking select until the end.
Once finished it will tell you click home and it well save!
You’re welcome 😇
Magdalys Reyes thankkk youuuu soooo much !!!
My unit cuts off for days at a time and then will cut back on
If I could I'd have this whole system ripped out
Ok so my dad has been messing with this how do I fix it it’s so hot I’m sweating in my own home, how should I make it cooler but not super cold my dads saying that if you put it in cool it will not change anything how do I fix this?!?!?
Thanks man. My instructions didn’t mention anything about how to use hold.
I absolutely hate this thermostat it runs for hours n will not shut off. My bills are actually higher than usually.
how the heck do you change the temperature???
with your finger
THANK YOU!!! One of these is installed in my apartment. It's hot outside here and it was still on heat. Apparently...we don't have air conditioning but I was able to exit the heat without having to call maintenance.
How did you do that ?
@@joanagonzales4491 the second button on the left...click it 3x. It says heat, cool, off. Since this post... maintenance has fixed the air...it was frozen. But still...the panel info is very useful.
What means (Cool on) before it doesn't show up when i turn on the a/c but now do it
What should the hold be on? Permanent or Temp?
Do the fan supposed to say on? How do I turn fan off?
I hate this thing. I don't feel that the "auto" feature is truly auto. Mine never turns off unless I manually turn it off. Once it gets to the desired temperature, it starts blowing cold air instead of just turning off. The customer service number & my HVAC guy have been useless. Did I say that I hate this thing????😫😫😫
Me too, they charge me $100 for both thermostat so that's why I didn't want to change it.
Roy thanks for the explanation, on the setup. They as all new items installed did not supply a operating manual. Cool On was flashing and I had to experiment to figure it out.
This efffing thermostat is a POS. Worst user interface possibly ever.
The heating guys installed this with my garage heater. I just wanted a light switch to turn it on and off that's all. I didn't all the fancy settings.
Thank you this was helpful!
We have this in our home. It's a new construction. But we get little heat downstairs and gets very hot upstairs (68degrees) how can we fix so we can get heat downstairs too?
With inside temp clicking on +to raise when you press hold does heat come at that temp permanent hold is removed
How do you turn on AC so that it's not just blowing room temp air? We recently had the thermostat replaced due to heater no longer working and now, I'm trying to figure out how to get the AC unit outside bedroom window to click on at the same time I'm programming the thermostat to the AC option. Does anyone know what I need to do?? Thanks!
Did you end up figuring this out?
Amazing thanks! I didn't know how to change it from temporary to permanent hold.
Does it take 24 hrs to calibrate correct temperature on thermostat?
Will the themostat not blow cool air on ac if the battery needs to be replaced
So you can’t program it day but day? Just Monday through Friday?
How do I lower the bottom #?
How do iI remove "Following Schedule"
Mine does not have hold or program and it won't go below 70°
I am having the same issue. Sometimes if u live in apartments they have them set where you cant turn them any lower than 70 and I liked mine on 69 it makes a difference in my house for some reason
Need help ac won't come on. Changed batteries. Should we try factory reset.
Helpful video 👍
When I put it on 70 degrees it jumps to 62 now I’m cold 🥶
Did you put it in permanant hold
Does this thermostat go above 78° because my house is still cool when I have it locked at 78 once it cut off it instantly cools back down I stay right off the lake of lake Erie I can look off my balcony and see the lake therefore the wind is blowing extra hard around this time and it's making the inside of my home cold with this new thermostat I can't get it to go above 78 My old one will go all the way to 90 is there a fix
Helpful video but I hate this thermostat so much. The furnace installer picked it. I just want to be able to adjust the heat or a/c as needed. Instead, I adjust the temperature, looks right but nothing happens.
Is there a light you can turn on?
This is terrible thermostat. I’m replacing it and it’s brand new the have guy installed
Should me fan be off while its on cool??
No it should be on auto
Marie Valliere Some HVAC experts says it’s better for air quality to have the fan running all the time. That’s what I do now.
GUYS REALLY! I JUST WANT 72 YEAR AROUND🤬 being a Registered Nurse, very few people would understand Metabolic Acidosis....i don't get this wicked thermostat! Just keep it simple! I want the old thermostat with the dial🥺
How come when I set it to 82, it actually goes down to 78 in the room?
Same
My thermostat won’t go below 68° on the AC. How do I get it to go lower?
My thermostat lets me go till 54. And do you have the same thermostat in the video because I do.
I set the thermostat to 60°. It is showing that it's 86° currently. It's been stuck on that same number and the temperature is getting hot outside and it's getting even hotter inside. My mom doesn't know what to do so I'm asking for help. It's almost 90°. Also, is there a way I can reset my password to a different one?
Did you solve? I’m having the same problem
Just got this thermostat. What is best way to set furnace to off for vacation for a few weeks? Is it better to to press mode to “off” or permanent hold on programmed settings?
Press mode to off and put it on permanent hold
question! i’m trying to turn on the air conditioner, but nothing is happening...? what do i do?
Oh my pro series the mode button just goes from heat to off not cool and that's what I need now the ac! Can anyone help
Did u ever figure out the problem? I'm currently having that same issue
Black love same here I also don’t have a hold button?
I realized I only have heat, no a/c on my unit.
Black love thx lol I realized I had the same thing too
What does Prog mean? Does it need to be on or off?
The hold button is not showing up?? Can't get permanent hold nothing to even show up.
My heat is stuck on 74, how can I turn it up?
I wish anyone can tell me how bypass the thermostat limit cause it's cold n my landlord has the heat at 73
I want to hook up the common wire but the furnace has a separate transformer. Will the common only work with a single transformer system/
How do you get the hold button? Mine doesn’t have one in the menu and I am burning up
There is no option to hold. I’m housesitting and it 85 in here. Going crazy trying to activate this thing. Nothing happens no matter what buttons I press
Mine is on hold 90 heat on ,auto fan and still freeze as hell something is wrong
arturseppe arturseppe Same
Same
How do you unlock it? I locked it, now it wants a password to get in. My shop is freezing and I can't change any of the thermostats.
Legends Info 1234
Why is my number 29.0. I was trying to look at someone teaching to turn off the cool on flashing button and it went from 82 degrees to 29.0. I held down the fan and plus sign and it took me to this number.
Please help. Thank you so much
I have the ProSeries model number TH421OU2002
need to put in a number for a new modem , need help to re set it.
I find this one to be very complicated!
I want to change the already programmed température but how???
G H Thank you!
I found out after all, 🙄
I just had one of these nightmares installed yesterday. it was reading 75 degrees right out of the box, which came from the truck outside. it was actually about 65 degrees in here at the time. it now reads 83 when it is in fact about ten degrees cooler. what the hell is up with this pos. I was better off with the old mercury switch thermostat. this thing is just a piece of shit. what a joke this so called technology is. just plain garbage
Do not buy this thermostat.. as you will freeze in the winter.
Maybe mine is block cus i dont have the menu for the f/c and prog and also the hold
My ac guy installed one a few months ago and my programming mode is not working. When pressing mode it doesn’t say PROG.
honeywell home proseries thermostat triangle with exclamation point what does that mean ?
It means you have an alert. Pressing menu will take you to your alerts so you can see what it is
1 Press Menu, and then press + until it
shows ALRT.
2 Press Select to display which alert(s) are
present.
3 The word SNZE (SNOOZE) appears.
4 Press Select again to snooze the reminder for 7 days.
5 To clear the alert, press Select, and then
to go to CLER (Clear).
6 Press Select to clear the reminder.
How do you turn off the fan? It only says “fan auto or fan on” . Please help 😭
Turn it to fan auto
Appreciate it bro it was cold in my house and I couldn't unlock it I raised up the heat to 80 cause it was cold I checked an hour later and it colder than it was b4 idk y
Mine doesn’t have program. I wonder if because I’m in an apartment
Installed this stat & all works well except when fan is set to the on mode the A/C will not cut off when desired temp is reached, keeps running but works great in the fan auto, whats wrong ?
Thats how it should be working when its on "On position" it will stay on no matter what , but if u put it on "auto" it will shutoff at the design temperature
Can someone help me please? If I just set the temperature without a schedule or hold will it stay at that temperature? I'm a simple person
This is to confusing all I want to turn heat, and cool when need not have to set everytime to confusing!!
Two days ago my old died! While I was work my sister told me that the maintenance finally show up and replace a new one when I got home! The new t4 pro doesn't give a cooling air and I'm very disappointed! I have trouble sleeping while sweating! My dad wanted me to call again to see what's up! This is a struggle!
My Honeywell T4 Thermostat does not have a PROG option in menu... What utter crap.
I can't find it either. Evidently mine is broken or it is very secret. DAMNIT
@@boalexander3811 Read the above reply to my comment, it will fix your problems.
@@poestis474 there is no above reply.
What kind of battery is required for this thermostat?
I just played the video over and heard you say 2 double A batteries.
Is it possible to connect this to wifi?
Mine does not cut off in auto mode
Same with mine. I hate it :(
My device is different and i don’t know what dose it work?
What does the “Lock” feature do and how do you use it?
Same
Hi how do I set below 70 degrees? Plz help
I can't figure out how to make it cooler I have the set temp at 68 and the room temp is 81 ... I'm burning, I've been trying to get it to work for 3 days now, I hate this stupid thermostat /;
That's probably not your thermostat. It sounds like your AC unit may be frozen.
Im in the same boat. The top number says 50 , but the bottom number says 81. It is burning in my house with no way to fix it.
Just moved into a new home. I have this thermostat. The unit is new. It doesn't go below 79. Its doesn't get cold at all. And the fan won't turn the hell off. I'm going to reset it and see what it does. If that doesn't work. I have a year warranty on anything on the house. So I'll either have them get a different thermostat or fix it. I don't like it.
Laurel Stubbs it was the thermostat, they had given me a broken one!
Sweetheartbabez i would call someone to check it out, the one they gave me was broken and it wasn't connecting to the unit
My house is now 67 and I want it at 71! It won't change even on my permanent hold. I'm so cold!!!
Mine doesn’t have a hold button
How do you turn it to emergency heat mode on a heat pump ?
My room temp is at 80 I have it set at 75, not cooling?
But the number on the bottom and the number on the top are not the same.
Need a honeywell thermostat book for dummies. ... trust me we hate ours too
Help- so I can’t turn off my a/c? Can someone please explain. I’m new at this
to turn the system off....hit the mode button until you see "off" To turn it back on... hit the mode button until you see cold or heat.
@@chrstfltchifyIIK you commented 3 years ago but thank you
When you change battery’s you got only two minutes to do it or you will have to reprogram unit.
What happens when you lock it out?
Mine when i try to turn it lower then 67 it wont go lower does anyone know how to fix that
My thermostat works opposite like if i turn on cool it send hot air if i put it on heat doesnt do anything unless i turn on fan can u help or recommend a video
Hello can you send me how I Air freshen
Does it have wifi connect?
My thermostat will not go pass 76 degrees. When I click on the + it will not go higher than. 76. What can I do?
how to reset ??? have a button ? Thank you !!!
I'll make a video Monday. It seems no one knows how to translate instructions to easily understand.
Buona sera ho un problema con un triangolo che non mi rileva la temperatura interna