This Xbox One Can't Breathe and Doesn't Turn On | Can We Fix It?
HTML-код
- Опубликовано: 4 июн 2021
- This Xbox One Can't Breathe and Doesn't Turn On | Can We Fix It?
I paid a total of £32.00 for this faulty Xbox One on Ebay. The description stated it doesn't turn on and that the warranty sticker is still in tact. I lack serious experience when it comes to fixing consoles, so let's see how this one turns out :)
Links to related videos
📺 I Built a Gaming PC and Gave it Away - • Building a PC for my S...
📺 Trying to Fix Something for a Friend - • I'M SO HAPPY I FIXED T...
Follow my journey:
📺 Subscribe - ruclips.net/user/JoeyDoesTech?su...
📞 Discord - / discord
📷 Instagram - / joeydoestech
🙋♂️ Twitter - / joeydoestech
🎮 Twitch - / genetics_tk
My Equipment (Affiliate Links):
🎤 Voiceover Microphone - Blue Yeti Pro amzn.to/3ggsPXX
🎤 Wireless Shirt Microphone - Rode Wireless Go amzn.to/32dLdbt
📷 Overhead Camera - Canon 250D amzn.to/2OOgbnD
🔬 Microscope - Andonstar AD407 amzn.to/3mKFUtL
🖊 Soldering Kit for Beginners - amzn.to/3ghOMWe
🟦 Soldering Mat - amzn.to/3mKLY5k
💡 Camera Lighting - amzn.to/3mLoNI9
🗄 Storage Cabinet for Small Parts - amzn.to/3aaeIzA
🔧 Screwdriver Set - amzn.to/3aB6wZp
💻 League of Legends RUclips Channel - / geneticstk
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech.
#XboxOne #ConsoleRepair #TryingtoFix - Наука
I noticed the fan twitch every time you plugged it in. good video enjoyed watching it
Thanks bud. Wait until you see the part 2 coming this weekend 😁👌🤔
Power is present because of the momentary fan movement when you insert the brick. Ok next step is hdmi must also be inserted because if fan doesn't spin the xbox may turn on but will kick into over heating and shut off and the notification will be displayed on the TV/monitor. Also that daughter board may be bad so try without it but use a fairly thin metal clip and by touching the pins in the connector port will turn on the xbox I believe it's the 3rd or 4th pin I can't remember but possible.
Nice video👍nice presentation.really enjoyed watching!👍
Thankyou Micro :)
Is there any part 2 of this xbox fixing video?
Eew, that thing is gross! With that rust hanging around, you might need to do some reflowing! Hopefully I'll be able to catch some of the livestream. Good luck mate! 👍
Hope I get to do some reflowing! Thanks pal :)
Great video as usual!
Thanks pal 😁
Long shot, wonder if the display is putting out any error codes?
Could be a thing to be honest Taylor. It's not getting any power whatsoever so doubt it will display, but can try tomorrow for sure :)
Great as always
Thankyou Froz!
Hey, i’m from the US but is there anyway I can talk to you privately about some stuff? It has to do with my ps4 controllers.
Hey :) Feel free to follow on Twitter and message me there. I don't have that much repair experience though!
It blows my mind that people treat their possessions like this
Them red lines are marks from the factory, they are common on bigger motherboards compared to smaller ones such as DS and Switches mate, love the channel btw always watch when new videos are uploaded 👍
Thanks for the tip :)
Did you fix this after mate? can't see a follow up vid?
Being honest mate I have NO idea, can't remember what happened to it lol.
Hdmi needs to be hooked up silly fan moves means powers present. Use a metal pin or paper clip to touch the pins on the board without the daughter board. But hdmi plug in and turn on. Power turns on for a second also if fan went spin kic look s it into over heating mode and will shut down. But again you can't tell unless the hdmi cord is plugged in while powering up. Did I say that right without confusing you?
Haha I'm a little confused but it makes sense :D Thanks!
Lol this was to be the unconfused version..lmfao. but on serious note if you havent fixed it yet or messed with it great we can start you on the positive outcome to success. Your power brick once its connected that little movement from the fan means powers present and ready to rock. But my advice is also plug in the hdmi so we can see an image on a screen. Then go ahead and try to turn it on from daughter board. That's if it's still same condition as it was .
Do u want to buy my Xbox? It turns on but there’s no ribbon cable attached to the top lid the only problem is e200 system error
No thanks E1. Appreciate the offer though pal :)
Ok np
Hey mate from Australia. I’ve come over to the channel from MMV. Been binge watching your channel and enjoying the journey. By the way, Bulk dust mixed with the moisture in the air and it sitting in 1 place also creates the rust. It may not be water damaged. Keep up the good work mate
Hey Dan! Sorry I haven't responded, been mega busy. Thanks for jumping over and watching a few videos, I've got another Xbox One that isn't displaying an image coming soon :D
I've got two xbox ones to fix same as this one I was happy to find your video as wanted know what it could be now I'm really nervous doing it when get round to it 😅
That's the whole fun of it right Burst 😃 Feel free to see the follow up video on the channel, that might help more.
@@JoeyDoesTech yeah watched that one I was suprised it worked to be honest so you just cleaned it out then it started working when you used the multi meter lol
Damn i wish i was on whole stream! But hey at least i watched whole video :3
You're amazing Krusander! :)
@@JoeyDoesTech nah I'm not 🐢
If you want to turn on Xbox without face plate gentle press by ribbon cable connection
most common issue with these not powering on is a MOSFET issue
I like your video
What if roaches just climbed out as you opened it 🤢 would you still fix it 😭😂 just curious on the dedication nice work though bro 🤲🏽🫶🏾🏌🏾
If you don't end up fixing it I'd love to have a try
There will be a video out tomorrow with an update from the livestream on Sunday :)
Great, hope it worked out
HDD platter spinning maybe?
Quite possibly. Don't think that's the fault though, looking forward to looking at this live :)
@@JoeyDoesTech yeah, I don't think so either. Just trying to find the source of that whine noise when it's plugged in. It kind of seems like it's trying to do something but... man that thing is in sad shape.
People really don't love their consoles...
It made me sad :(
I have a original xbox one just like that one
Hmmmm.... I ain't looking too good. 😖 Perhaps they misheard "clean the heatsink" as "clean it in the sink".
As you can see from the Xbox One and the PS3, modern consoles are practically PCs.
I see the heatsink fan wants to go - traditionally they'd work off of electromagnets, although it could be witchcraft these days. Could it be worth trying to encourage it to spin, with a cotton bud or something? Also is the heatsink fan trying to turn before you touch the front power switch? If so, the switch could be shorting.
Hope to join you and the JDT band from 14.00 BST (UTC+1).
See you there :) I did try and turn it whilst it was on to see if it makes a difference but nothing :(
What the heck happend to this console?! It's very disgusting!
Looks like someone left it abandoned :( It's VERY gross! Going live soon if you're free Leon? :)
@@JoeyDoesTech Maybe.. how sad..
😅 can you fix my Xbox