excellent guide very clever man pointed me in the right direction , in my case disc wouldnt eject either , I followed his lead then i removed and opened the DVD unit , not the bottom one , cleaned all connections with wd40 , actuated the dvd holding mechanism manually to release the disc , spun disc etc , could have been jammed perhaps ,put back together turned on ignition and bingo its all good ....display back to normal, hope it helps someone
Buongiorno, sostituendo l'apparecchiatura del navigatore è necessario fare una nuova configurazione o basta rimettere il cd delle mappe e riavviare il tutto??? Grazie, Igino (ITALY) Lecce
Hi, i need help with my jaguar x type. I don't have the dvd and accidentally press update on the vehicle monitor and now the monitor is black and the heater is always on. Code 5051, but the problem is that the vehicle does not have the dvd in the navigation system.
Hi, I’m having a similar problem with my XJ. Can you just check if it’s receiving power by inserting/ejecting disk? Does that mean I need to replace my sat unit?
excellent guide very clever man pointed me in the right direction , in my case disc wouldnt eject either , I followed his lead then i removed and opened the DVD unit , not the bottom one , cleaned all connections with wd40 , actuated the dvd holding mechanism manually to release the disc , spun disc etc , could have been jammed perhaps ,put back together turned on ignition and bingo its all good ....display back to normal, hope it helps someone
Top tech vid clip. Tested as instructed, swapped unit, fixed the fault. Keep up with the tutorials. Thanks for your input.
Very helpful indeed thank you for your clear instruction. I have identical fault and was about to remove the screen. Thank you.
If i disconect the nav systen the screeen will funcion?
martin zarkov No, the screen won’t come back if you disconnect the sat nav.
You have to repair it or replace it
@@lsateam1491 I have the same problem but I disconnected the cables and reconnected them and it doesn't work
@@naydenivaylovfilipov9889 happed the same to me...😞
Once fitted does it need programming to Car? Or is Plug & play?
Best DIY
Buongiorno, sostituendo l'apparecchiatura del navigatore è necessario fare una nuova configurazione o basta rimettere il cd delle mappe e riavviare il tutto??? Grazie, Igino (ITALY) Lecce
Why was there water on your navigation module?
There was no water into the navigation.
Could’ve been some rain drops in between the shots.
Hi, i need help with my jaguar x type. I don't have the dvd and accidentally press update on the vehicle monitor and now the monitor is black and the heater is always on. Code 5051, but the problem is that the vehicle does not have the dvd in the navigation system.
I'll sugest to get hold of a DVD and carry on with the update. as far as I remember that is the only way to do it
Did u find a way to fix this without the dvd?
I get same problem...
Hi, I’m having a similar problem with my XJ. Can you just check if it’s receiving power by inserting/ejecting disk? Does that mean I need to replace my sat unit?
Hi, I'm having the same problem on my 2004 XJ. Did you find a solution for this problem?
Hi, I'm having the same problem on my 2004 XJ. Did you find a solution for this problem?
Only way to fix it is by a replacement
Gabriel Ortiz I had to replace the unit. I don’t know if it can be repaired.